diff options
Diffstat (limited to 'include/linux/phy.h')
-rw-r--r-- | include/linux/phy.h | 62 |
1 files changed, 57 insertions, 5 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index 6de8d7a90d78..ddf66198f751 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -65,7 +65,7 @@ extern const int phy_basic_ports_array[3]; extern const int phy_fibre_port_array[1]; extern const int phy_all_ports_features_array[7]; extern const int phy_10_100_features_array[4]; -extern const int phy_basic_t1_features_array[2]; +extern const int phy_basic_t1_features_array[3]; extern const int phy_gbit_features_array[2]; extern const int phy_10gbit_features_array[1]; @@ -87,8 +87,8 @@ extern const int phy_10gbit_features_array[1]; * * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined - * @PHY_INTERFACE_MODE_MII: Median-independent interface - * @PHY_INTERFACE_MODE_GMII: Gigabit median-independent interface + * @PHY_INTERFACE_MODE_MII: Media-independent interface + * @PHY_INTERFACE_MODE_GMII: Gigabit media-independent interface * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface @@ -115,6 +115,8 @@ extern const int phy_10gbit_features_array[1]; * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN + * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII + * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN * @PHY_INTERFACE_MODE_MAX: Book keeping * * Describes the interface between the MAC and PHY. @@ -152,6 +154,8 @@ typedef enum { PHY_INTERFACE_MODE_USXGMII, /* 10GBASE-KR - with Clause 73 AN */ PHY_INTERFACE_MODE_10GKR, + PHY_INTERFACE_MODE_QUSGMII, + PHY_INTERFACE_MODE_1000BASEKX, PHY_INTERFACE_MODE_MAX, } phy_interface_t; @@ -249,6 +253,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "trgmii"; case PHY_INTERFACE_MODE_1000BASEX: return "1000base-x"; + case PHY_INTERFACE_MODE_1000BASEKX: + return "1000base-kx"; case PHY_INTERFACE_MODE_2500BASEX: return "2500base-x"; case PHY_INTERFACE_MODE_5GBASER: @@ -267,12 +273,13 @@ static inline const char *phy_modes(phy_interface_t interface) return "10gbase-kr"; case PHY_INTERFACE_MODE_100BASEX: return "100base-x"; + case PHY_INTERFACE_MODE_QUSGMII: + return "qusgmii"; default: return "unknown"; } } - #define PHY_INIT_TIMEOUT 100000 #define PHY_FORCE_TIMEOUT 10 @@ -564,13 +571,20 @@ struct macsec_ops; * @advertising: Currently advertised linkmodes * @adv_old: Saved advertised while power saving for WoL * @lp_advertising: Current link partner advertised linkmodes + * @host_interfaces: PHY interface modes supported by host * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited * @autoneg: Flag autoneg being used + * @rate_matching: Current rate matching mode * @link: Current link state * @autoneg_complete: Flag auto negotiation of the link has completed * @mdix: Current crossover * @mdix_ctrl: User setting of crossover + * @pma_extable: Cached value of PMA/PMD Extended Abilities Register * @interrupts: Flag interrupts have been enabled + * @irq_suspended: Flag indicating PHY is suspended and therefore interrupt + * handling shall be postponed until PHY has resumed + * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, + * requiring a rerun of the interrupt handler after resume * @interface: enum phy_interface_t value * @skb: Netlink message for cable diagnostics * @nest: Netlink nest used for cable diagnostics @@ -583,6 +597,7 @@ struct macsec_ops; * @master_slave_get: Current master/slave advertisement * @master_slave_state: Current master/slave configuration * @mii_ts: Pointer to time stamper callbacks + * @psec: Pointer to Power Sourcing Equipment control struct * @lock: Mutex for serialization access to PHY * @state_queue: Work queue for state machine * @shared: Pointer to private data shared by phys in one package @@ -625,6 +640,10 @@ struct phy_device { /* Interrupts are enabled */ unsigned interrupts:1; + unsigned irq_suspended:1; + unsigned irq_rerun:1; + + int rate_matching; enum phy_state state; @@ -653,6 +672,9 @@ struct phy_device { /* used with phy_speed_down */ __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); + /* Host supported PHY interface types. Should be ignored if empty. */ + DECLARE_PHY_INTERFACE_MASK(host_interfaces); + /* Energy efficient ethernet modes which should be prohibited */ u32 eee_broken_modes; @@ -694,10 +716,13 @@ struct phy_device { struct phylink *phylink; struct net_device *attached_dev; struct mii_timestamper *mii_ts; + struct pse_control *psec; u8 mdix; u8 mdix_ctrl; + int pma_extable; + void (*phy_link_change)(struct phy_device *phydev, bool up); void (*adjust_link)(struct net_device *dev); @@ -788,6 +813,21 @@ struct phy_driver { */ int (*get_features)(struct phy_device *phydev); + /** + * @get_rate_matching: Get the supported type of rate matching for a + * particular phy interface. This is used by phy consumers to determine + * whether to advertise lower-speed modes for that interface. It is + * assumed that if a rate matching mode is supported on an interface, + * then that interface's rate can be adapted to all slower link speeds + * supported by the phy. If iface is %PHY_INTERFACE_MODE_NA, and the phy + * supports any kind of rate matching for any interface, then it must + * return that rate matching mode (preferring %RATE_MATCH_PAUSE to + * %RATE_MATCH_CRS). If the interface is not supported, this should + * return %RATE_MATCH_NONE. + */ + int (*get_rate_matching)(struct phy_device *phydev, + phy_interface_t iface); + /* PHY Power Management */ /** @suspend: Suspend the hardware, saving state if needed */ int (*suspend)(struct phy_device *phydev); @@ -954,6 +994,9 @@ struct phy_fixup { const char *phy_speed_to_str(int speed); const char *phy_duplex_to_str(unsigned int duplex); +const char *phy_rate_matching_to_str(int rate_matching); + +int phy_interface_num_ports(phy_interface_t interface); /* A structure for mapping a particular speed and duplex * combination to a particular SUPPORTED and ADVERTISED value @@ -1536,6 +1579,9 @@ static inline void phy_device_reset(struct phy_device *phydev, int value) #define phydev_err(_phydev, format, args...) \ dev_err(&_phydev->mdio.dev, format, ##args) +#define phydev_err_probe(_phydev, err, format, args...) \ + dev_err_probe(&_phydev->mdio.dev, err, format, ##args) + #define phydev_info(_phydev, format, args...) \ dev_info(&_phydev->mdio.dev, format, ##args) @@ -1578,6 +1624,7 @@ int genphy_update_link(struct phy_device *phydev); int genphy_read_lpa(struct phy_device *phydev); int genphy_read_status_fixed(struct phy_device *phydev); int genphy_read_status(struct phy_device *phydev); +int genphy_read_master_slave(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); int genphy_loopback(struct phy_device *phydev, bool enable); @@ -1610,11 +1657,14 @@ int genphy_c45_read_link(struct phy_device *phydev); int genphy_c45_read_lpa(struct phy_device *phydev); int genphy_c45_read_pma(struct phy_device *phydev); int genphy_c45_pma_setup_forced(struct phy_device *phydev); +int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev); int genphy_c45_an_config_aneg(struct phy_device *phydev); int genphy_c45_an_disable_aneg(struct phy_device *phydev); int genphy_c45_read_mdix(struct phy_device *phydev); int genphy_c45_pma_read_abilities(struct phy_device *phydev); +int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev); int genphy_c45_read_status(struct phy_device *phydev); +int genphy_c45_baset1_read_status(struct phy_device *phydev); int genphy_c45_config_aneg(struct phy_device *phydev); int genphy_c45_loopback(struct phy_device *phydev, bool enable); int genphy_c45_pma_resume(struct phy_device *phydev); @@ -1661,7 +1711,9 @@ int phy_disable_interrupts(struct phy_device *phydev); void phy_request_interrupt(struct phy_device *phydev); void phy_free_interrupt(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); -int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); +int phy_get_rate_matching(struct phy_device *phydev, + phy_interface_t iface); +void phy_set_max_speed(struct phy_device *phydev, u32 max_speed); void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode); void phy_advertise_supported(struct phy_device *phydev); void phy_support_sym_pause(struct phy_device *phydev); |