diff options
Diffstat (limited to 'include/linux/platform_data/cros_ec_commands.h')
| -rw-r--r-- | include/linux/platform_data/cros_ec_commands.h | 102 |
1 files changed, 95 insertions, 7 deletions
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 271bd87bff0a..5744a2d746aa 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -13,8 +13,8 @@ #ifndef __CROS_EC_COMMANDS_H #define __CROS_EC_COMMANDS_H - - +#include <linux/bits.h> +#include <linux/types.h> #define BUILD_ASSERT(_cond) @@ -51,10 +51,14 @@ /* * The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff * and they tell the kernel that so we have to think of it as two parts. + * + * Other BIOSes report only the I/O port region spanned by the Microchip + * MEC series EC; an attempt to address a larger region may fail. */ -#define EC_HOST_CMD_REGION0 0x800 -#define EC_HOST_CMD_REGION1 0x880 -#define EC_HOST_CMD_REGION_SIZE 0x80 +#define EC_HOST_CMD_REGION0 0x800 +#define EC_HOST_CMD_REGION1 0x880 +#define EC_HOST_CMD_REGION_SIZE 0x80 +#define EC_HOST_CMD_MEC_REGION_SIZE 0x8 /* EC command register bit functions */ #define EC_LPC_CMDR_DATA BIT(0) /* Data ready for host to read */ @@ -783,7 +787,7 @@ struct ec_host_response { * * Packets always start with a request or response header. They are followed * by data_len bytes of data. If the data_crc_present flag is set, the data - * bytes are followed by a CRC-8 of that data, using using x^8 + x^2 + x + 1 + * bytes are followed by a CRC-8 of that data, using x^8 + x^2 + x + 1 * polynomial. * * Host algorithm when sending a request q: @@ -1296,6 +1300,8 @@ enum ec_feature_code { * mux. */ EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK = 43, + /* The MCU is a System Companion Processor (SCP) 2nd Core. */ + EC_FEATURE_SCP_C1 = 45, }; #define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) @@ -3386,6 +3392,9 @@ enum ec_mkbp_event { /* Send an incoming CEC message to the AP */ EC_MKBP_EVENT_CEC_MESSAGE = 9, + /* Peripheral device charger event */ + EC_MKBP_EVENT_PCHG = 12, + /* Number of MKBP events */ EC_MKBP_EVENT_COUNT, }; @@ -5527,6 +5536,67 @@ enum pchg_state { [PCHG_STATE_CONNECTED] = "CONNECTED", \ } +/* + * Update firmware of peripheral chip + */ +#define EC_CMD_PCHG_UPDATE 0x0136 + +/* Port number is encoded in bit[28:31]. */ +#define EC_MKBP_PCHG_PORT_SHIFT 28 +/* Utility macro for converting MKBP event to port number. */ +#define EC_MKBP_PCHG_EVENT_TO_PORT(e) (((e) >> EC_MKBP_PCHG_PORT_SHIFT) & 0xf) +/* Utility macro for extracting event bits. */ +#define EC_MKBP_PCHG_EVENT_MASK(e) ((e) \ + & GENMASK(EC_MKBP_PCHG_PORT_SHIFT-1, 0)) + +#define EC_MKBP_PCHG_UPDATE_OPENED BIT(0) +#define EC_MKBP_PCHG_WRITE_COMPLETE BIT(1) +#define EC_MKBP_PCHG_UPDATE_CLOSED BIT(2) +#define EC_MKBP_PCHG_UPDATE_ERROR BIT(3) +#define EC_MKBP_PCHG_DEVICE_EVENT BIT(4) + +enum ec_pchg_update_cmd { + /* Reset chip to normal mode. */ + EC_PCHG_UPDATE_CMD_RESET_TO_NORMAL = 0, + /* Reset and put a chip in update (a.k.a. download) mode. */ + EC_PCHG_UPDATE_CMD_OPEN, + /* Write a block of data containing FW image. */ + EC_PCHG_UPDATE_CMD_WRITE, + /* Close update session. */ + EC_PCHG_UPDATE_CMD_CLOSE, + /* End of commands */ + EC_PCHG_UPDATE_CMD_COUNT, +}; + +struct ec_params_pchg_update { + /* PCHG port number */ + uint8_t port; + /* enum ec_pchg_update_cmd */ + uint8_t cmd; + /* Padding */ + uint8_t reserved0; + uint8_t reserved1; + /* Version of new firmware */ + uint32_t version; + /* CRC32 of new firmware */ + uint32_t crc32; + /* Address in chip memory where <data> is written to */ + uint32_t addr; + /* Size of <data> */ + uint32_t size; + /* Partial data of new firmware */ + uint8_t data[]; +} __ec_align4; + +BUILD_ASSERT(EC_PCHG_UPDATE_CMD_COUNT + < BIT(sizeof(((struct ec_params_pchg_update *)0)->cmd)*8)); + +struct ec_response_pchg_update { + /* Block size */ + uint32_t block_size; +} __ec_align4; + + /*****************************************************************************/ /* Voltage regulator controls */ @@ -5644,7 +5714,7 @@ struct ec_response_typec_discovery { uint8_t svid_count; /* Number of SVIDs partner sent */ uint16_t reserved; uint32_t discovery_vdo[6]; /* Max VDOs allowed after VDM header is 6 */ - struct svid_mode_info svids[0]; + struct svid_mode_info svids[]; } __ec_align1; /* USB Type-C commands for AP-controlled device policy. */ @@ -5654,8 +5724,21 @@ enum typec_control_command { TYPEC_CONTROL_COMMAND_EXIT_MODES, TYPEC_CONTROL_COMMAND_CLEAR_EVENTS, TYPEC_CONTROL_COMMAND_ENTER_MODE, + TYPEC_CONTROL_COMMAND_TBT_UFP_REPLY, + TYPEC_CONTROL_COMMAND_USB_MUX_SET, +}; + +/* Replies the AP may specify to the TBT EnterMode command as a UFP */ +enum typec_tbt_ufp_reply { + TYPEC_TBT_UFP_REPLY_NAK, + TYPEC_TBT_UFP_REPLY_ACK, }; +struct typec_usb_mux_set { + uint8_t mux_index; /* Index of the mux to set in the chain */ + uint8_t mux_flags; /* USB_PD_MUX_*-encoded USB mux state to set */ +} __ec_align1; + struct ec_params_typec_control { uint8_t port; uint8_t command; /* enum typec_control_command */ @@ -5669,6 +5752,8 @@ struct ec_params_typec_control { union { uint32_t clear_events_mask; uint8_t mode_to_enter; /* enum typec_mode */ + uint8_t tbt_ufp_reply; /* enum typec_tbt_ufp_reply */ + struct typec_usb_mux_set mux_params; uint8_t placeholder[128]; }; } __ec_align1; @@ -5747,6 +5832,9 @@ enum tcpc_cc_polarity { #define PD_STATUS_EVENT_SOP_DISC_DONE BIT(0) #define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE BIT(1) #define PD_STATUS_EVENT_HARD_RESET BIT(2) +#define PD_STATUS_EVENT_DISCONNECTED BIT(3) +#define PD_STATUS_EVENT_MUX_0_SET_DONE BIT(4) +#define PD_STATUS_EVENT_MUX_1_SET_DONE BIT(5) struct ec_params_typec_status { uint8_t port; |