diff options
Diffstat (limited to 'include/linux/platform_data')
34 files changed, 165 insertions, 394 deletions
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h index c78d90b28b19..3c73c045f8da 100644 --- a/include/linux/platform_data/asoc-ti-mcbsp.h +++ b/include/linux/platform_data/asoc-ti-mcbsp.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/mcbsp.h - * * Defines for Multi-Channel Buffered Serial Port * * Copyright (C) 2002 RidgeRun, Inc. @@ -21,8 +19,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#ifndef __ASM_ARCH_OMAP_MCBSP_H -#define __ASM_ARCH_OMAP_MCBSP_H +#ifndef __ASOC_TI_MCBSP_H +#define __ASOC_TI_MCBSP_H #include <linux/spinlock.h> #include <linux/clk.h> diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h index 9991aea3d577..2f34bb98fe2a 100644 --- a/include/linux/platform_data/asoc-ux500-msp.h +++ b/include/linux/platform_data/asoc-ux500-msp.h @@ -10,16 +10,9 @@ #include <linux/platform_data/dma-ste-dma40.h> -enum msp_i2s_id { - MSP_I2S_0 = 0, - MSP_I2S_1, - MSP_I2S_2, - MSP_I2S_3, -}; - /* Platform data structure for a MSP I2S-device */ struct msp_i2s_platform_data { - enum msp_i2s_id id; + int id; struct stedma40_chan_cfg *msp_i2s_dma_rx; struct stedma40_chan_cfg *msp_i2s_dma_tx; }; diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h deleted file mode 100644 index 80088973b734..000000000000 --- a/include/linux/platform_data/clocksource-nomadik-mtu.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -void nmdk_timer_init(void __iomem *base, int irq); -void nmdk_clkevt_reset(void); -void nmdk_clksrc_reset(void); - -#endif /* __PLAT_MTU_H */ - diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index 689a856b86f9..5245992b0367 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -92,6 +92,7 @@ enum { MCASP_VERSION_1 = 0, /* DM646x */ MCASP_VERSION_2, /* DA8xx/OMAPL1x */ MCASP_VERSION_3, /* TI81xx/AM33xx */ + MCASP_VERSION_4, /* DRA7xxx */ }; enum mcbsp_clk_input_pin { diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h index 3a3942823c20..eabac4e2fc99 100644 --- a/include/linux/platform_data/dma-imx-sdma.h +++ b/include/linux/platform_data/dma-imx-sdma.h @@ -43,6 +43,11 @@ struct sdma_script_start_addrs { s32 dptc_dvfs_addr; s32 utra_addr; s32 ram_code_start_addr; + /* End of v1 array */ + s32 mcu_2_ssish_addr; + s32 ssish_2_mcu_addr; + s32 hdmi_dma_addr; + /* End of v2 array */ }; /** diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index beac6b8b6a7b..bcbc6c3c14c0 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -39,6 +39,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ IMX_DMATYPE_ASRC, /* ASRC */ IMX_DMATYPE_ESAI, /* ESAI */ + IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ }; enum imx_dma_prio { diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h index 239e0fc1bb1f..66574ea39f97 100644 --- a/include/linux/platform_data/dma-mmp_tdma.h +++ b/include/linux/platform_data/dma-mmp_tdma.h @@ -1,6 +1,4 @@ /* - * linux/arch/arm/mach-mmp/include/mach/sram.h - * * SRAM Memory Management * * Copyright (c) 2011 Marvell Semiconductors Inc. @@ -11,8 +9,8 @@ * */ -#ifndef __ASM_ARCH_SRAM_H -#define __ASM_ARCH_SRAM_H +#ifndef __DMA_MMP_TDMA_H +#define __DMA_MMP_TDMA_H #include <linux/genalloc.h> @@ -32,4 +30,4 @@ struct sram_platdata { extern struct gen_pool *sram_get_gpool(char *pool_name); -#endif /* __ASM_ARCH_SRAM_H */ +#endif /* __DMA_MMP_TDMA_H */ diff --git a/include/linux/platform_data/dma-mv_xor.h b/include/linux/platform_data/dma-mv_xor.h index 8ec18f64e396..92ffd3245f76 100644 --- a/include/linux/platform_data/dma-mv_xor.h +++ b/include/linux/platform_data/dma-mv_xor.h @@ -1,11 +1,9 @@ /* - * arch/arm/plat-orion/include/plat/mv_xor.h - * * Marvell XOR platform device data definition file. */ -#ifndef __PLAT_MV_XOR_H -#define __PLAT_MV_XOR_H +#ifndef __DMA_MV_XOR_H +#define __DMA_MV_XOR_H #include <linux/dmaengine.h> #include <linux/mbus.h> diff --git a/include/linux/platform_data/eth-netx.h b/include/linux/platform_data/eth-netx.h index 88af1ac28ead..a395159725d5 100644 --- a/include/linux/platform_data/eth-netx.h +++ b/include/linux/platform_data/eth-netx.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-netx/include/mach/eth.h - * * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix * * This program is free software; you can redistribute it and/or modify @@ -17,8 +15,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef ASMARM_ARCH_ETH_H -#define ASMARM_ARCH_ETH_H +#ifndef __ETH_NETX_H +#define __ETH_NETX_H struct netxeth_platform_data { unsigned int xcno; /* number of xmac/xpec engine this eth uses */ diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h index 6efd20264585..fbe2f7535741 100644 --- a/include/linux/platform_data/gpio-davinci.h +++ b/include/linux/platform_data/gpio-davinci.h @@ -28,13 +28,12 @@ enum davinci_gpio_type { struct davinci_gpio_platform_data { u32 ngpio; u32 gpio_unbanked; - u32 intc_irq_num; }; struct davinci_gpio_controller { struct gpio_chip chip; - int irq_base; + struct irq_domain *irq_domain; /* Serialize access to GPIO registers */ spinlock_t lock; void __iomem *regs; diff --git a/include/linux/platform_data/gpio-lpc32xx.h b/include/linux/platform_data/gpio-lpc32xx.h new file mode 100644 index 000000000000..a544e962a818 --- /dev/null +++ b/include/linux/platform_data/gpio-lpc32xx.h @@ -0,0 +1,50 @@ +/* + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_GPIO_LPC32XX_H +#define __MACH_GPIO_LPC32XX_H + +/* + * Note! + * Muxed GP pins need to be setup to the GP state in the board level + * code prior to using this driver. + * GPI pins : 28xP3 group + * GPO pins : 24xP3 group + * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group + */ + +#define LPC32XX_GPIO_P0_MAX 8 +#define LPC32XX_GPIO_P1_MAX 24 +#define LPC32XX_GPIO_P2_MAX 13 +#define LPC32XX_GPIO_P3_MAX 6 +#define LPC32XX_GPI_P3_MAX 29 +#define LPC32XX_GPO_P3_MAX 24 + +#define LPC32XX_GPIO_P0_GRP 0 +#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) +#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) +#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) +#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) +#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) + +/* + * A specific GPIO can be selected with this macro + * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) + * See the LPC32x0 User's guide for GPIO group numbers + */ +#define LPC32XX_GPIO(x, y) ((x) + (y)) + +#endif /* __MACH_GPIO_LPC32XX_H */ diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h index c167e4429bc7..0e3cce130fe2 100644 --- a/include/linux/platform_data/hwmon-s3c.h +++ b/include/linux/platform_data/hwmon-s3c.h @@ -1,5 +1,4 @@ -/* linux/arch/arm/plat-s3c/include/plat/hwmon.h - * +/* * Copyright 2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ @@ -11,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_ADC_HWMON_H -#define __ASM_ARCH_ADC_HWMON_H __FILE__ +#ifndef __HWMON_S3C_H__ +#define __HWMON_S3C_H__ /** * s3c_hwmon_chcfg - channel configuration @@ -47,5 +46,4 @@ struct s3c_hwmon_pdata { */ extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); -#endif /* __ASM_ARCH_ADC_HWMON_H */ - +#endif /* __HWMON_S3C_H__ */ diff --git a/include/linux/platform_data/i2c-nomadik.h b/include/linux/platform_data/i2c-nomadik.h deleted file mode 100644 index 3a8be9cdc95c..000000000000 --- a/include/linux/platform_data/i2c-nomadik.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#ifndef __PDATA_I2C_NOMADIK_H -#define __PDATA_I2C_NOMADIK_H - -enum i2c_freq_mode { - I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ - I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ - I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ - I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ -}; - -/** - * struct nmk_i2c_controller - client specific controller configuration - * @clk_freq: clock frequency for the operation mode - * @slsu: Slave data setup time in ns. - * The needed setup time for three modes of operation - * are 250ns, 100ns and 10ns respectively thus leading - * to the values of 14, 6, 2 for a 48 MHz i2c clk - * @tft: Tx FIFO Threshold in bytes - * @rft: Rx FIFO Threshold in bytes - * @timeout Slave response timeout(ms) - * @sm: speed mode - */ -struct nmk_i2c_controller { - u32 clk_freq; - unsigned short slsu; - unsigned char tft; - unsigned char rft; - int timeout; - enum i2c_freq_mode sm; -}; - -#endif /* __PDATA_I2C_NOMADIK_H */ diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h index 1e2f4e97f428..adccee25b162 100644 --- a/include/linux/platform_data/keypad-ep93xx.h +++ b/include/linux/platform_data/keypad-ep93xx.h @@ -1,9 +1,5 @@ -/* - * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h - */ - -#ifndef __ASM_ARCH_EP93XX_KEYPAD_H -#define __ASM_ARCH_EP93XX_KEYPAD_H +#ifndef __KEYPAD_EP93XX_H +#define __KEYPAD_EP93XX_H struct matrix_keymap_data; @@ -32,4 +28,4 @@ struct ep93xx_keypad_platform_data { #define EP93XX_MATRIX_ROWS (8) #define EP93XX_MATRIX_COLS (8) -#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ +#endif /* __KEYPAD_EP93XX_H */ diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h index a6b21eddb212..c3a3abae98f0 100644 --- a/include/linux/platform_data/keypad-omap.h +++ b/include/linux/platform_data/keypad-omap.h @@ -1,14 +1,12 @@ /* - * arch/arm/plat-omap/include/mach/keypad.h - * * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef ASMARM_ARCH_KEYPAD_H -#define ASMARM_ARCH_KEYPAD_H +#ifndef __KEYPAD_OMAP_H +#define __KEYPAD_OMAP_H #ifndef CONFIG_ARCH_OMAP1 #warning Please update the board to use matrix-keypad driver diff --git a/include/linux/platform_data/leds-kirkwood-netxbig.h b/include/linux/platform_data/leds-kirkwood-netxbig.h index 24b536ebdf13..d2be19a51acd 100644 --- a/include/linux/platform_data/leds-kirkwood-netxbig.h +++ b/include/linux/platform_data/leds-kirkwood-netxbig.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h - * * Platform data structure for netxbig LED driver * * This file is licensed under the terms of the GNU General Public @@ -8,8 +6,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __MACH_LEDS_NETXBIG_H -#define __MACH_LEDS_NETXBIG_H +#ifndef __LEDS_KIRKWOOD_NETXBIG_H +#define __LEDS_KIRKWOOD_NETXBIG_H struct netxbig_gpio_ext { unsigned *addr; @@ -52,4 +50,4 @@ struct netxbig_led_platform_data { int num_leds; }; -#endif /* __MACH_LEDS_NETXBIG_H */ +#endif /* __LEDS_KIRKWOOD_NETXBIG_H */ diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h index e21272e5f668..6a9fed57f346 100644 --- a/include/linux/platform_data/leds-kirkwood-ns2.h +++ b/include/linux/platform_data/leds-kirkwood-ns2.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-kirkwood/include/mach/leds-ns2.h - * * Platform data structure for Network Space v2 LED driver * * This file is licensed under the terms of the GNU General Public @@ -8,8 +6,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __MACH_LEDS_NS2_H -#define __MACH_LEDS_NS2_H +#ifndef __LEDS_KIRKWOOD_NS2_H +#define __LEDS_KIRKWOOD_NS2_H struct ns2_led { const char *name; @@ -23,4 +21,4 @@ struct ns2_led_platform_data { struct ns2_led *leds; }; -#endif /* __MACH_LEDS_NS2_H */ +#endif /* __LEDS_KIRKWOOD_NS2_H */ diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h index e2a41dd7690c..8da8f94ee15c 100644 --- a/include/linux/platform_data/max197.h +++ b/include/linux/platform_data/max197.h @@ -11,6 +11,9 @@ * For further information, see the Documentation/hwmon/max197 file. */ +#ifndef _PDATA_MAX197_H +#define _PDATA_MAX197_H + /** * struct max197_platform_data - MAX197 connectivity info * @convert: Function used to start a conversion with control byte ctrl. @@ -19,3 +22,5 @@ struct max197_platform_data { int (*convert)(u8 ctrl); }; + +#endif /* _PDATA_MAX197_H */ diff --git a/include/linux/platform_data/mfd-mcp-sa11x0.h b/include/linux/platform_data/mfd-mcp-sa11x0.h index 4b2860ae3828..747cd6baf711 100644 --- a/include/linux/platform_data/mfd-mcp-sa11x0.h +++ b/include/linux/platform_data/mfd-mcp-sa11x0.h @@ -1,14 +1,12 @@ /* - * arch/arm/mach-sa1100/include/mach/mcp.h - * * Copyright (C) 2005 Russell King. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARM_ARCH_MCP_H -#define __ASM_ARM_ARCH_MCP_H +#ifndef __MFD_MCP_SA11X0_H +#define __MFD_MCP_SA11X0_H #include <linux/types.h> diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 4da5bfa2147f..3e9dd6676b97 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/nand.h - * * Copyright (C) 2006 Micron Technology Inc. * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h index ffb801998e5d..a94147124929 100644 --- a/include/linux/platform_data/mtd-nand-pxa3xx.h +++ b/include/linux/platform_data/mtd-nand-pxa3xx.h @@ -55,6 +55,9 @@ struct pxa3xx_nand_platform_data { /* indicate how many chip selects will be used */ int num_cs; + /* use an flash-based bad block table */ + bool flash_bbt; + const struct mtd_partition *parts[NUM_CHIP_SELECT]; unsigned int nr_parts[NUM_CHIP_SELECT]; diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h index e9a9fb188f97..56ff0e6f5ad1 100644 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ b/include/linux/platform_data/mtd-onenand-omap2.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/onenand.h - * * Copyright (C) 2006 Nokia Corporation * Author: Juha Yrjola * diff --git a/include/linux/platform_data/mtd-orion_nand.h b/include/linux/platform_data/mtd-orion_nand.h index 9f3c180834d1..a7ce77c7c1a8 100644 --- a/include/linux/platform_data/mtd-orion_nand.h +++ b/include/linux/platform_data/mtd-orion_nand.h @@ -1,13 +1,11 @@ /* - * arch/arm/plat-orion/include/plat/orion_nand.h - * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __PLAT_ORION_NAND_H -#define __PLAT_ORION_NAND_H +#ifndef __MTD_ORION_NAND_H +#define __MTD_ORION_NAND_H /* * Device bus NAND private data diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h deleted file mode 100644 index abf5bed84df3..000000000000 --- a/include/linux/platform_data/pinctrl-nomadik.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -#define GPIO_BLOCK_SHIFT 5 -#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 -/* These appear in DB8540 and later ASICs */ -#define NMK_GPIO_EDGELEVEL 0x5C -#define NMK_GPIO_LEVEL 0x60 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/include/linux/platform_data/pn544.h b/include/linux/platform_data/pn544.h index 713bfd703342..5ce1ab983f44 100644 --- a/include/linux/platform_data/pn544.h +++ b/include/linux/platform_data/pn544.h @@ -16,8 +16,7 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * along with this program; if not, see <http://www.gnu.org/licenses/>. */ #ifndef _PN544_H_ diff --git a/include/linux/platform_data/sht15.h b/include/linux/platform_data/sht15.h index 33e0fd27225e..12289c1e9413 100644 --- a/include/linux/platform_data/sht15.h +++ b/include/linux/platform_data/sht15.h @@ -12,6 +12,9 @@ * For further information, see the Documentation/hwmon/sht15 file. */ +#ifndef _PDATA_SHT15_H +#define _PDATA_SHT15_H + /** * struct sht15_platform_data - sht15 connectivity info * @gpio_data: no. of gpio to which bidirectional data line is @@ -31,3 +34,5 @@ struct sht15_platform_data { bool no_otp_reload; bool low_resolution; }; + +#endif /* _PDATA_SHT15_H */ diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index 54334393ab92..a947ab8b441a 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -8,20 +8,6 @@ struct clk; /** - * enum si5351_variant - SiLabs Si5351 chip variant - * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input) - * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input) - * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input) - * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input) - */ -enum si5351_variant { - SI5351_VARIANT_A = 1, - SI5351_VARIANT_A3 = 2, - SI5351_VARIANT_B = 3, - SI5351_VARIANT_C = 4, -}; - -/** * enum si5351_pll_src - Si5351 pll clock source * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input @@ -115,14 +101,12 @@ struct si5351_clkout_config { /** * struct si5351_platform_data - Platform data for the Si5351 clock driver - * @variant: Si5351 chip variant * @clk_xtal: xtal input clock * @clk_clkin: clkin input clock * @pll_src: array of pll source clock setting * @clkout: array of clkout configuration */ struct si5351_platform_data { - enum si5351_variant variant; struct clk *clk_xtal; struct clk *clk_clkin; enum si5351_pll_src pll_src[2]; diff --git a/include/linux/platform_data/spi-nuc900.h b/include/linux/platform_data/spi-nuc900.h index 2c4e0c128501..4b3f46832e19 100644 --- a/include/linux/platform_data/spi-nuc900.h +++ b/include/linux/platform_data/spi-nuc900.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-w90x900/include/mach/nuc900_spi.h - * * Copyright (c) 2009 Nuvoton technology corporation. * * Wan ZongShun <mcuos.com@gmail.com> @@ -11,8 +9,8 @@ * */ -#ifndef __ASM_ARCH_SPI_H -#define __ASM_ARCH_SPI_H +#ifndef __SPI_NUC900_H +#define __SPI_NUC900_H extern void mfp_set_groupg(struct device *dev, const char *subname); @@ -32,4 +30,4 @@ struct nuc900_spi_chip { unsigned char bits_per_word; }; -#endif /* __ASM_ARCH_SPI_H */ +#endif /* __SPI_NUC900_H */ diff --git a/include/linux/platform_data/usb-ehci-orion.h b/include/linux/platform_data/usb-ehci-orion.h index 6fc78e430420..52b0acb35fd7 100644 --- a/include/linux/platform_data/usb-ehci-orion.h +++ b/include/linux/platform_data/usb-ehci-orion.h @@ -1,13 +1,11 @@ /* - * arch/arm/plat-orion/include/plat/ehci-orion.h - * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __PLAT_EHCI_ORION_H -#define __PLAT_EHCI_ORION_H +#ifndef __USB_EHCI_ORION_H +#define __USB_EHCI_ORION_H #include <linux/mbus.h> diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h new file mode 100644 index 000000000000..43b5ce139c37 --- /dev/null +++ b/include/linux/platform_data/usb-omap1.h @@ -0,0 +1,53 @@ +/* + * Platform data for OMAP1 USB + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __LINUX_USB_OMAP1_H +#define __LINUX_USB_OMAP1_H + +#include <linux/platform_device.h> + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + const char *extcon; /* extcon device for OTG */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); +}; + +#endif /* __LINUX_USB_OMAP1_H */ diff --git a/include/linux/platform_data/video-ep93xx.h b/include/linux/platform_data/video-ep93xx.h index d5ae11d7c453..92fc2b2232e7 100644 --- a/include/linux/platform_data/video-ep93xx.h +++ b/include/linux/platform_data/video-ep93xx.h @@ -1,9 +1,5 @@ -/* - * arch/arm/mach-ep93xx/include/mach/fb.h - */ - -#ifndef __ASM_ARCH_EP93XXFB_H -#define __ASM_ARCH_EP93XXFB_H +#ifndef __VIDEO_EP93XX_H +#define __VIDEO_EP93XX_H struct platform_device; struct fb_videomode; @@ -53,4 +49,4 @@ struct ep93xxfb_mach_info { void (*blank)(int blank_mode, struct fb_info *info); }; -#endif /* __ASM_ARCH_EP93XXFB_H */ +#endif /* __VIDEO_EP93XX_H */ diff --git a/include/linux/platform_data/video-msm_fb.h b/include/linux/platform_data/video-msm_fb.h index 1f4fc81b3d8f..31449be3eadb 100644 --- a/include/linux/platform_data/video-msm_fb.h +++ b/include/linux/platform_data/video-msm_fb.h @@ -1,5 +1,4 @@ -/* arch/arm/mach-msm/include/mach/msm_fb.h - * +/* * Internal shared definitions for various MSM framebuffer parts. * * Copyright (C) 2007 Google Incorporated diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h index 486b4c519ae2..07c6c1e153f8 100644 --- a/include/linux/platform_data/video-pxafb.h +++ b/include/linux/platform_data/video-pxafb.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-pxa/include/mach/pxafb.h - * * Support for the xscale frame buffer. * * Author: Jean-Frederic Clere diff --git a/include/linux/platform_data/vsp1.h b/include/linux/platform_data/vsp1.h index a73a456d7f11..63170e2614b3 100644 --- a/include/linux/platform_data/vsp1.h +++ b/include/linux/platform_data/vsp1.h @@ -14,6 +14,8 @@ #define __PLATFORM_VSP1_H__ #define VSP1_HAS_LIF (1 << 0) +#define VSP1_HAS_LUT (1 << 1) +#define VSP1_HAS_SRU (1 << 2) struct vsp1_platform_data { unsigned int features; |