diff options
Diffstat (limited to 'include/linux/soc/ti')
| -rw-r--r-- | include/linux/soc/ti/k3-ringacc.h | 28 | ||||
| -rw-r--r-- | include/linux/soc/ti/knav_dma.h | 10 | ||||
| -rw-r--r-- | include/linux/soc/ti/knav_qmss.h | 12 | ||||
| -rw-r--r-- | include/linux/soc/ti/omap1-io.h | 143 | ||||
| -rw-r--r-- | include/linux/soc/ti/omap1-mux.h | 311 | ||||
| -rw-r--r-- | include/linux/soc/ti/omap1-soc.h | 198 | ||||
| -rw-r--r-- | include/linux/soc/ti/omap1-usb.h | 116 | ||||
| -rw-r--r-- | include/linux/soc/ti/ti-msgmgr.h | 18 | ||||
| -rw-r--r-- | include/linux/soc/ti/ti_sci_inta_msi.h | 4 | ||||
| -rw-r--r-- | include/linux/soc/ti/ti_sci_protocol.h | 104 |
10 files changed, 879 insertions, 65 deletions
diff --git a/include/linux/soc/ti/k3-ringacc.h b/include/linux/soc/ti/k3-ringacc.h index 26f73df0a524..39b022b92598 100644 --- a/include/linux/soc/ti/k3-ringacc.h +++ b/include/linux/soc/ti/k3-ringacc.h @@ -2,7 +2,7 @@ /* * K3 Ring Accelerator (RA) subsystem interface * - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com */ #ifndef __SOC_TI_K3_RINGACC_API_H_ @@ -67,6 +67,10 @@ struct k3_ring; * few times. It's usable when the same ring is used as Free Host PD ring * for different flows, for example. * Note: Locking should be done by consumer if required + * @dma_dev: Master device which is using and accessing to the ring + * memory when the mode is K3_RINGACC_RING_MODE_RING. Memory allocations + * should be done using this device. + * @asel: Address Space Select value for physical addresses */ struct k3_ring_cfg { u32 size; @@ -74,6 +78,9 @@ struct k3_ring_cfg { enum k3_ring_mode mode; #define K3_RINGACC_RING_SHARED BIT(1) u32 flags; + + struct device *dma_dev; + u32 asel; }; #define K3_RINGACC_RING_ID_ANY (-1) @@ -107,6 +114,10 @@ struct k3_ringacc *of_k3_ringacc_get_by_phandle(struct device_node *np, struct k3_ring *k3_ringacc_request_ring(struct k3_ringacc *ringacc, int id, u32 flags); +int k3_ringacc_request_rings_pair(struct k3_ringacc *ringacc, + int fwd_id, int compl_id, + struct k3_ring **fwd_ring, + struct k3_ring **compl_ring); /** * k3_ringacc_ring_reset - ring reset * @ring: pointer on Ring @@ -241,4 +252,19 @@ int k3_ringacc_ring_pop_tail(struct k3_ring *ring, void *elem); u32 k3_ringacc_get_tisci_dev_id(struct k3_ring *ring); +/* DMA ring support */ +struct ti_sci_handle; + +/** + * struct struct k3_ringacc_init_data - Initialization data for DMA rings + */ +struct k3_ringacc_init_data { + const struct ti_sci_handle *tisci; + u32 tisci_dev_id; + u32 num_rings; +}; + +struct k3_ringacc *k3_ringacc_dmarings_init(struct platform_device *pdev, + struct k3_ringacc_init_data *data); + #endif /* __SOC_TI_K3_RINGACC_API_H_ */ diff --git a/include/linux/soc/ti/knav_dma.h b/include/linux/soc/ti/knav_dma.h index 7127ec301537..18d806a8e52c 100644 --- a/include/linux/soc/ti/knav_dma.h +++ b/include/linux/soc/ti/knav_dma.h @@ -1,17 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014 Texas Instruments Incorporated * Authors: Sandeep Nair <sandeep_n@ti.com * Cyril Chemparathy <cyril@ti.com Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __SOC_TI_KEYSTONE_NAVIGATOR_DMA_H__ diff --git a/include/linux/soc/ti/knav_qmss.h b/include/linux/soc/ti/knav_qmss.h index 9745df6ed9d3..175f466ebcc3 100644 --- a/include/linux/soc/ti/knav_qmss.h +++ b/include/linux/soc/ti/knav_qmss.h @@ -1,19 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Keystone Navigator Queue Management Sub-System header * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com * Author: Sandeep Nair <sandeep_n@ti.com> * Cyril Chemparathy <cyril@ti.com> * Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __SOC_TI_KNAV_QMSS_H__ diff --git a/include/linux/soc/ti/omap1-io.h b/include/linux/soc/ti/omap1-io.h new file mode 100644 index 000000000000..f7f12728d4a6 --- /dev/null +++ b/include/linux/soc/ti/omap1-io.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __ASM_ARCH_OMAP_IO_H +#define __ASM_ARCH_OMAP_IO_H + +#ifndef __ASSEMBLER__ +#include <linux/types.h> + +#ifdef CONFIG_ARCH_OMAP1_ANY +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ +extern u8 omap_readb(u32 pa); +extern u16 omap_readw(u32 pa); +extern u32 omap_readl(u32 pa); +extern void omap_writeb(u8 v, u32 pa); +extern void omap_writew(u16 v, u32 pa); +extern void omap_writel(u32 v, u32 pa); +#else +static inline u8 omap_readb(u32 pa) { return 0; } +static inline u16 omap_readw(u32 pa) { return 0; } +static inline u32 omap_readl(u32 pa) { return 0; } +static inline void omap_writeb(u8 v, u32 pa) { } +static inline void omap_writew(u16 v, u32 pa) { } +static inline void omap_writel(u32 v, u32 pa) { } +#endif +#endif + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +#endif diff --git a/include/linux/soc/ti/omap1-mux.h b/include/linux/soc/ti/omap1-mux.h new file mode 100644 index 000000000000..59c239b5569c --- /dev/null +++ b/include/linux/soc/ti/omap1-mux.h @@ -0,0 +1,311 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __SOC_TI_OMAP1_MUX_H +#define __SOC_TI_OMAP1_MUX_H +/* + * This should not really be a global header, it reflects the + * traditional way that omap1 does pin muxing without the + * pinctrl subsystem. + */ + +enum omap7xx_index { + /* OMAP 730 keyboard */ + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, + + /* USB */ + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, + + /* MMC */ + MMC_7XX_CMD, + MMC_7XX_CLK, + MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, + + /* SPI */ + SPI_7XX_1, + SPI_7XX_2, + SPI_7XX_3, + SPI_7XX_4, + SPI_7XX_5, + SPI_7XX_6, + + /* UART */ + UART_7XX_1, + UART_7XX_2, +}; + +enum omap1xxx_index { + /* UART1 (BT_UART_GATING)*/ + UART1_TX = 0, + UART1_RTS, + + /* UART2 (COM_UART_GATING)*/ + UART2_TX, + UART2_RX, + UART2_CTS, + UART2_RTS, + + /* UART3 (GIGA_UART_GATING) */ + UART3_TX, + UART3_RX, + UART3_CTS, + UART3_RTS, + UART3_CLKREQ, + UART3_BCLK, /* 12MHz clock out */ + Y15_1610_UART3_RTS, + + /* PWT & PWL */ + PWT, + PWL, + + /* USB master generic */ + R18_USB_VBUS, + R18_1510_USB_GPIO0, + W4_USB_PUEN, + W4_USB_CLKO, + W4_USB_HIGHZ, + W4_GPIO58, + + /* USB1 master */ + USB1_SUSP, + USB1_SEO, + W13_1610_USB1_SE0, + USB1_TXEN, + USB1_TXD, + USB1_VP, + USB1_VM, + USB1_RCV, + USB1_SPEED, + R13_1610_USB1_SPEED, + R13_1710_USB1_SE0, + + /* USB2 master */ + USB2_SUSP, + USB2_VP, + USB2_TXEN, + USB2_VM, + USB2_RCV, + USB2_SEO, + USB2_TXD, + + /* OMAP-1510 GPIO */ + R18_1510_GPIO0, + R19_1510_GPIO1, + M14_1510_GPIO2, + + /* OMAP1610 GPIO */ + P18_1610_GPIO3, + Y15_1610_GPIO17, + + /* OMAP-1710 GPIO */ + R18_1710_GPIO0, + V2_1710_GPIO10, + N21_1710_GPIO14, + W15_1710_GPIO40, + + /* MPUIO */ + MPUIO2, + N15_1610_MPUIO2, + MPUIO4, + MPUIO5, + T20_1610_MPUIO5, + W11_1610_MPUIO6, + V10_1610_MPUIO7, + W11_1610_MPUIO9, + V10_1610_MPUIO10, + W10_1610_MPUIO11, + E20_1610_MPUIO13, + U20_1610_MPUIO14, + E19_1610_MPUIO15, + + /* MCBSP2 */ + MCBSP2_CLKR, + MCBSP2_CLKX, + MCBSP2_DR, + MCBSP2_DX, + MCBSP2_FSR, + MCBSP2_FSX, + + /* MCBSP3 */ + MCBSP3_CLKX, + + /* Misc ballouts */ + BALLOUT_V8_ARMIO3, + N20_HDQ, + + /* OMAP-1610 MMC2 */ + W8_1610_MMC2_DAT0, + V8_1610_MMC2_DAT1, + W15_1610_MMC2_DAT2, + R10_1610_MMC2_DAT3, + Y10_1610_MMC2_CLK, + Y8_1610_MMC2_CMD, + V9_1610_MMC2_CMDDIR, + V5_1610_MMC2_DATDIR0, + W19_1610_MMC2_DATDIR1, + R18_1610_MMC2_CLKIN, + + /* OMAP-1610 External Trace Interface */ + M19_1610_ETM_PSTAT0, + L15_1610_ETM_PSTAT1, + L18_1610_ETM_PSTAT2, + L19_1610_ETM_D0, + J19_1610_ETM_D6, + J18_1610_ETM_D7, + + /* OMAP16XX GPIO */ + P20_1610_GPIO4, + V9_1610_GPIO7, + W8_1610_GPIO9, + N20_1610_GPIO11, + N19_1610_GPIO13, + P10_1610_GPIO22, + V5_1610_GPIO24, + AA20_1610_GPIO_41, + W19_1610_GPIO48, + M7_1610_GPIO62, + V14_16XX_GPIO37, + R9_16XX_GPIO18, + L14_16XX_GPIO49, + + /* OMAP-1610 uWire */ + V19_1610_UWIRE_SCLK, + U18_1610_UWIRE_SDI, + W21_1610_UWIRE_SDO, + N14_1610_UWIRE_CS0, + P15_1610_UWIRE_CS3, + N15_1610_UWIRE_CS1, + + /* OMAP-1610 SPI */ + U19_1610_SPIF_SCK, + U18_1610_SPIF_DIN, + P20_1610_SPIF_DIN, + W21_1610_SPIF_DOUT, + R18_1610_SPIF_DOUT, + N14_1610_SPIF_CS0, + N15_1610_SPIF_CS1, + T19_1610_SPIF_CS2, + P15_1610_SPIF_CS3, + + /* OMAP-1610 Flash */ + L3_1610_FLASH_CS2B_OE, + M8_1610_FLASH_CS2B_WE, + + /* First MMC */ + MMC_CMD, + MMC_DAT1, + MMC_DAT2, + MMC_DAT0, + MMC_CLK, + MMC_DAT3, + + /* OMAP-1710 MMC CMDDIR and DATDIR0 */ + M15_1710_MMC_CLKI, + P19_1710_MMC_CMDDIR, + P20_1710_MMC_DATDIR0, + + /* OMAP-1610 USB0 alternate pin configuration */ + W9_USB0_TXEN, + AA9_USB0_VP, + Y5_USB0_RCV, + R9_USB0_VM, + V6_USB0_TXD, + W5_USB0_SE0, + V9_USB0_SPEED, + V9_USB0_SUSP, + + /* USB2 */ + W9_USB2_TXEN, + AA9_USB2_VP, + Y5_USB2_RCV, + R9_USB2_VM, + V6_USB2_TXD, + W5_USB2_SE0, + + /* 16XX UART */ + R13_1610_UART1_TX, + V14_16XX_UART1_RX, + R14_1610_UART1_CTS, + AA15_1610_UART1_RTS, + R9_16XX_UART2_RX, + L14_16XX_UART3_RX, + + /* I2C OMAP-1610 */ + I2C_SCL, + I2C_SDA, + + /* Keypad */ + F18_1610_KBC0, + D20_1610_KBC1, + D19_1610_KBC2, + E18_1610_KBC3, + C21_1610_KBC4, + G18_1610_KBR0, + F19_1610_KBR1, + H14_1610_KBR2, + E20_1610_KBR3, + E19_1610_KBR4, + N19_1610_KBR5, + + /* Power management */ + T20_1610_LOW_PWR, + + /* MCLK Settings */ + V5_1710_MCLK_ON, + V5_1710_MCLK_OFF, + R10_1610_MCLK_ON, + R10_1610_MCLK_OFF, + + /* CompactFlash controller */ + P11_1610_CF_CD2, + R11_1610_CF_IOIS16, + V10_1610_CF_IREQ, + W10_1610_CF_RESET, + W11_1610_CF_CD1, + + /* parallel camera */ + J15_1610_CAM_LCLK, + J18_1610_CAM_D7, + J19_1610_CAM_D6, + J14_1610_CAM_D5, + K18_1610_CAM_D4, + K19_1610_CAM_D3, + K15_1610_CAM_D2, + K14_1610_CAM_D1, + L19_1610_CAM_D0, + L18_1610_CAM_VS, + L15_1610_CAM_HS, + M19_1610_CAM_RSTZ, + Y15_1610_CAM_OUTCLK, + + /* serial camera */ + H19_1610_CAM_EXCLK, + Y12_1610_CCP_CLKP, + W13_1610_CCP_CLKM, + W14_1610_CCP_DATAP, + Y14_1610_CCP_DATAM, + +}; + +#ifdef CONFIG_OMAP_MUX +extern int omap_cfg_reg(unsigned long reg_cfg); +#else +static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif diff --git a/include/linux/soc/ti/omap1-soc.h b/include/linux/soc/ti/omap1-soc.h new file mode 100644 index 000000000000..81008d400bb6 --- /dev/null +++ b/include/linux/soc/ti/omap1-soc.h @@ -0,0 +1,198 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +#define cpu_class_is_omap1() 1 + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif diff --git a/include/linux/soc/ti/omap1-usb.h b/include/linux/soc/ti/omap1-usb.h new file mode 100644 index 000000000000..67488698601a --- /dev/null +++ b/include/linux/soc/ti/omap1-usb.h @@ -0,0 +1,116 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SOC_TI_OMAP1_USB +#define __SOC_TI_OMAP1_USB +/* + * Constants in this file are used all over the place, in platform + * code, as well as the udc, phy and ohci drivers. + * This is not a great design, but unlikely to get fixed after + * such a long time. Don't do this elsewhere. + */ + +#define OMAP1_OTG_BASE 0xfffb0400 +#define OMAP1_UDC_BASE 0xfffb4000 + +#define OMAP2_UDC_BASE 0x4805e200 +#define OMAP2_OTG_BASE 0x4805e300 +#define OTG_BASE OMAP1_OTG_BASE +#define UDC_BASE OMAP1_UDC_BASE + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +# define OTG_SOFT_RESET (1 << 1) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL (OTG_BASE + 0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ + // same bits as in IRQ_EN +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ + +/*-------------------------------------------------------------------------*/ + +/* OMAP1 */ +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) + +#endif diff --git a/include/linux/soc/ti/ti-msgmgr.h b/include/linux/soc/ti/ti-msgmgr.h index eac8e0c6fe11..543da257a5f2 100644 --- a/include/linux/soc/ti/ti-msgmgr.h +++ b/include/linux/soc/ti/ti-msgmgr.h @@ -1,26 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Texas Instruments' Message Manager * - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2022 Texas Instruments Incorporated - https://www.ti.com/ * Nishanth Menon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef TI_MSGMGR_H #define TI_MSGMGR_H +struct mbox_chan; + /** * struct ti_msgmgr_message - Message Manager structure * @len: Length of data in the Buffer * @buf: Buffer pointer + * @chan_rx: Expected channel for response, must be provided to use polled rx + * @timeout_rx_ms: Timeout value to use if polling for response * * This is the structure for data used in mbox_send_message * the length of data buffer used depends on the SoC integration @@ -30,6 +26,8 @@ struct ti_msgmgr_message { size_t len; u8 *buf; + struct mbox_chan *chan_rx; + int timeout_rx_ms; }; #endif /* TI_MSGMGR_H */ diff --git a/include/linux/soc/ti/ti_sci_inta_msi.h b/include/linux/soc/ti/ti_sci_inta_msi.h index 11fb5048f5f6..4dba2f2aff6f 100644 --- a/include/linux/soc/ti/ti_sci_inta_msi.h +++ b/include/linux/soc/ti/ti_sci_inta_msi.h @@ -2,7 +2,7 @@ /* * Texas Instruments' K3 TI SCI INTA MSI helper * - * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018-2019 Texas Instruments Incorporated - https://www.ti.com/ * Lokesh Vutla <lokeshvutla@ti.com> */ @@ -18,6 +18,4 @@ struct irq_domain struct irq_domain *parent); int ti_sci_inta_msi_domain_alloc_irqs(struct device *dev, struct ti_sci_resource *res); -unsigned int ti_sci_inta_msi_get_virq(struct device *dev, u32 index); -void ti_sci_inta_msi_domain_free_irqs(struct device *dev); #endif /* __INCLUDE_LINUX_IRQCHIP_TI_SCI_INTA_H */ diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h index 9531ec823298..bd0d11af76c5 100644 --- a/include/linux/soc/ti/ti_sci_protocol.h +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -2,7 +2,7 @@ /* * Texas Instruments System Control Interface Protocol * - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ * Nishanth Menon */ @@ -196,6 +196,22 @@ struct ti_sci_clk_ops { }; /** + * struct ti_sci_resource_desc - Description of TI SCI resource instance range. + * @start: Start index of the first resource range. + * @num: Number of resources in the first range. + * @start_sec: Start index of the second resource range. + * @num_sec: Number of resources in the second range. + * @res_map: Bitmap to manage the allocation of these resources. + */ +struct ti_sci_resource_desc { + u16 start; + u16 num; + u16 start_sec; + u16 num_sec; + unsigned long *res_map; +}; + +/** * struct ti_sci_rm_core_ops - Resource management core operations * @get_range: Get a range of resources belonging to ti sci host. * @get_rage_from_shost: Get a range of resources belonging to @@ -209,25 +225,28 @@ struct ti_sci_clk_ops { * - dev_id: TISCI device ID. * - subtype: Resource assignment subtype that is being requested * from the given device. - * - range_start: Start index of the resource range - * - range_end: Number of resources in the range + * - desc: Pointer to ti_sci_resource_desc to be updated with the resource + * range start index and number of resources */ struct ti_sci_rm_core_ops { int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id, - u8 subtype, u16 *range_start, u16 *range_num); + u8 subtype, struct ti_sci_resource_desc *desc); int (*get_range_from_shost)(const struct ti_sci_handle *handle, u32 dev_id, u8 subtype, u8 s_host, - u16 *range_start, u16 *range_num); + struct ti_sci_resource_desc *desc); }; +#define TI_SCI_RESASG_SUBTYPE_IR_OUTPUT 0 +#define TI_SCI_RESASG_SUBTYPE_IA_VINT 0xa +#define TI_SCI_RESASG_SUBTYPE_GLOBAL_EVENT_SEVT 0xd /** * struct ti_sci_rm_irq_ops: IRQ management operations * @set_irq: Set an IRQ route between the requested source * and destination * @set_event_map: Set an Event based peripheral irq to Interrupt * Aggregator. - * @free_irq: Free an an IRQ route between the requested source - * destination. + * @free_irq: Free an IRQ route between the requested source + * and destination. * @free_event_map: Free an event based peripheral irq to Interrupt * Aggregator. */ @@ -256,30 +275,46 @@ struct ti_sci_rm_irq_ops { #define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID BIT(4) /* RA config.order_id parameter is valid for RM ring configure TISCI message */ #define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5) +/* RA config.virtid parameter is valid for RM ring configure TISCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_VIRTID_VALID BIT(6) +/* RA config.asel parameter is valid for RM ring configure TISCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ASEL_VALID BIT(7) #define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \ (TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \ TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \ TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \ TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \ - TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID) + TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_ASEL_VALID) + +/** + * struct ti_sci_msg_rm_ring_cfg - Ring configuration + * + * Parameters for Navigator Subsystem ring configuration + * See @ti_sci_msg_rm_ring_cfg_req + */ +struct ti_sci_msg_rm_ring_cfg { + u32 valid_params; + u16 nav_id; + u16 index; + u32 addr_lo; + u32 addr_hi; + u32 count; + u8 mode; + u8 size; + u8 order_id; + u16 virtid; + u8 asel; +}; /** * struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations - * @config: configure the SoC Navigator Subsystem Ring Accelerator ring - * @get_config: get the SoC Navigator Subsystem Ring Accelerator ring - * configuration + * @set_cfg: configure the SoC Navigator Subsystem Ring Accelerator ring */ struct ti_sci_rm_ringacc_ops { - int (*config)(const struct ti_sci_handle *handle, - u32 valid_params, u16 nav_id, u16 index, - u32 addr_lo, u32 addr_hi, u32 count, u8 mode, - u8 size, u8 order_id - ); - int (*get_config)(const struct ti_sci_handle *handle, - u32 nav_id, u32 index, u8 *mode, - u32 *addr_lo, u32 *addr_hi, u32 *count, - u8 *size, u8 *order_id); + int (*set_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_ring_cfg *params); }; /** @@ -317,6 +352,9 @@ struct ti_sci_rm_psil_ops { #define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES 2 #define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES 3 +#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_TCHAN 0 +#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_BCHAN 1 + /* UDMAP TX/RX channel valid_params common declarations */ #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID BIT(0) #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID BIT(1) @@ -342,6 +380,8 @@ struct ti_sci_msg_rm_udmap_tx_ch_cfg { #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID BIT(11) #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID BIT(12) #define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID BIT(13) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID BIT(15) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_EXTENDED_CH_TYPE_VALID BIT(16) u16 nav_id; u16 index; u8 tx_pause_on_err; @@ -359,6 +399,8 @@ struct ti_sci_msg_rm_udmap_tx_ch_cfg { u16 fdepth; u8 tx_sched_priority; u8 tx_burst_size; + u8 tx_tdtype; + u8 extended_ch_type; }; /** @@ -518,18 +560,6 @@ struct ti_sci_handle { #define TI_SCI_RESOURCE_NULL 0xffff /** - * struct ti_sci_resource_desc - Description of TI SCI resource instance range. - * @start: Start index of the resource. - * @num: Number of resources. - * @res_map: Bitmap to manage the allocation of these resources. - */ -struct ti_sci_resource_desc { - u16 start; - u16 num; - unsigned long *res_map; -}; - -/** * struct ti_sci_resource - Structure representing a resource assigned * to a device. * @sets: Number of sets available from this resource type @@ -556,6 +586,9 @@ u32 ti_sci_get_num_resources(struct ti_sci_resource *res); struct ti_sci_resource * devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, struct device *dev, u32 dev_id, char *of_prop); +struct ti_sci_resource * +devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev, + u32 dev_id, u32 sub_type); #else /* CONFIG_TI_SCI_PROTOCOL */ @@ -609,6 +642,13 @@ devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, { return ERR_PTR(-EINVAL); } + +static inline struct ti_sci_resource * +devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev, + u32 dev_id, u32 sub_type) +{ + return ERR_PTR(-EINVAL); +} #endif /* CONFIG_TI_SCI_PROTOCOL */ #endif /* __TISCI_PROTOCOL_H */ |