diff options
Diffstat (limited to 'include/linux/ulpi')
| -rw-r--r-- | include/linux/ulpi/driver.h | 60 | ||||
| -rw-r--r-- | include/linux/ulpi/interface.h | 23 | ||||
| -rw-r--r-- | include/linux/ulpi/regs.h | 130 |
3 files changed, 213 insertions, 0 deletions
diff --git a/include/linux/ulpi/driver.h b/include/linux/ulpi/driver.h new file mode 100644 index 000000000000..388f6e08b9d4 --- /dev/null +++ b/include/linux/ulpi/driver.h @@ -0,0 +1,60 @@ +#ifndef __LINUX_ULPI_DRIVER_H +#define __LINUX_ULPI_DRIVER_H + +#include <linux/mod_devicetable.h> + +#include <linux/device.h> + +struct ulpi_ops; + +/** + * struct ulpi - describes ULPI PHY device + * @id: vendor and product ids for ULPI device + * @ops: I/O access + * @dev: device interface + */ +struct ulpi { + struct ulpi_device_id id; + struct ulpi_ops *ops; + struct device dev; +}; + +#define to_ulpi_dev(d) container_of(d, struct ulpi, dev) + +static inline void ulpi_set_drvdata(struct ulpi *ulpi, void *data) +{ + dev_set_drvdata(&ulpi->dev, data); +} + +static inline void *ulpi_get_drvdata(struct ulpi *ulpi) +{ + return dev_get_drvdata(&ulpi->dev); +} + +/** + * struct ulpi_driver - describes a ULPI PHY driver + * @id_table: array of device identifiers supported by this driver + * @probe: binds this driver to ULPI device + * @remove: unbinds this driver from ULPI device + * @driver: the name and owner members must be initialized by the drivers + */ +struct ulpi_driver { + const struct ulpi_device_id *id_table; + int (*probe)(struct ulpi *ulpi); + void (*remove)(struct ulpi *ulpi); + struct device_driver driver; +}; + +#define to_ulpi_driver(d) container_of(d, struct ulpi_driver, driver) + +int ulpi_register_driver(struct ulpi_driver *drv); +void ulpi_unregister_driver(struct ulpi_driver *drv); + +#define module_ulpi_driver(__ulpi_driver) \ + module_driver(__ulpi_driver, ulpi_register_driver, \ + ulpi_unregister_driver) + +int ulpi_read(struct ulpi *ulpi, u8 addr); +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val); + +#endif /* __LINUX_ULPI_DRIVER_H */ diff --git a/include/linux/ulpi/interface.h b/include/linux/ulpi/interface.h new file mode 100644 index 000000000000..4de8ab491038 --- /dev/null +++ b/include/linux/ulpi/interface.h @@ -0,0 +1,23 @@ +#ifndef __LINUX_ULPI_INTERFACE_H +#define __LINUX_ULPI_INTERFACE_H + +#include <linux/types.h> + +struct ulpi; + +/** + * struct ulpi_ops - ULPI register access + * @dev: the interface provider + * @read: read operation for ULPI register access + * @write: write operation for ULPI register access + */ +struct ulpi_ops { + struct device *dev; + int (*read)(struct ulpi_ops *ops, u8 addr); + int (*write)(struct ulpi_ops *ops, u8 addr, u8 val); +}; + +struct ulpi *ulpi_register_interface(struct device *, struct ulpi_ops *); +void ulpi_unregister_interface(struct ulpi *); + +#endif /* __LINUX_ULPI_INTERFACE_H */ diff --git a/include/linux/ulpi/regs.h b/include/linux/ulpi/regs.h new file mode 100644 index 000000000000..b5b8b8804560 --- /dev/null +++ b/include/linux/ulpi/regs.h @@ -0,0 +1,130 @@ +#ifndef __LINUX_ULPI_REGS_H +#define __LINUX_ULPI_REGS_H + +/* + * Macros for Set and Clear + * See ULPI 1.1 specification to find the registers with Set and Clear offsets + */ +#define ULPI_SET(a) (a + 1) +#define ULPI_CLR(a) (a + 2) + +/* + * Register Map + */ +#define ULPI_VENDOR_ID_LOW 0x00 +#define ULPI_VENDOR_ID_HIGH 0x01 +#define ULPI_PRODUCT_ID_LOW 0x02 +#define ULPI_PRODUCT_ID_HIGH 0x03 +#define ULPI_FUNC_CTRL 0x04 +#define ULPI_IFC_CTRL 0x07 +#define ULPI_OTG_CTRL 0x0a +#define ULPI_USB_INT_EN_RISE 0x0d +#define ULPI_USB_INT_EN_FALL 0x10 +#define ULPI_USB_INT_STS 0x13 +#define ULPI_USB_INT_LATCH 0x14 +#define ULPI_DEBUG 0x15 +#define ULPI_SCRATCH 0x16 +/* Optional Carkit Registers */ +#define ULPI_CARKIT_CTRL 0x19 +#define ULPI_CARKIT_INT_DELAY 0x1c +#define ULPI_CARKIT_INT_EN 0x1d +#define ULPI_CARKIT_INT_STS 0x20 +#define ULPI_CARKIT_INT_LATCH 0x21 +#define ULPI_CARKIT_PLS_CTRL 0x22 +/* Other Optional Registers */ +#define ULPI_TX_POS_WIDTH 0x25 +#define ULPI_TX_NEG_WIDTH 0x26 +#define ULPI_POLARITY_RECOVERY 0x27 +/* Access Extended Register Set */ +#define ULPI_ACCESS_EXTENDED 0x2f +/* Vendor Specific */ +#define ULPI_VENDOR_SPECIFIC 0x30 +/* Extended Registers */ +#define ULPI_EXT_VENDOR_SPECIFIC 0x80 + +/* + * Register Bits + */ + +/* Function Control */ +#define ULPI_FUNC_CTRL_XCVRSEL BIT(0) +#define ULPI_FUNC_CTRL_XCVRSEL_MASK 0x3 +#define ULPI_FUNC_CTRL_HIGH_SPEED 0x0 +#define ULPI_FUNC_CTRL_FULL_SPEED 0x1 +#define ULPI_FUNC_CTRL_LOW_SPEED 0x2 +#define ULPI_FUNC_CTRL_FS4LS 0x3 +#define ULPI_FUNC_CTRL_TERMSELECT BIT(2) +#define ULPI_FUNC_CTRL_OPMODE BIT(3) +#define ULPI_FUNC_CTRL_OPMODE_MASK (0x3 << 3) +#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0x0 << 3) +#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (0x1 << 3) +#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (0x2 << 3) +#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (0x3 << 3) +#define ULPI_FUNC_CTRL_RESET BIT(5) +#define ULPI_FUNC_CTRL_SUSPENDM BIT(6) + +/* Interface Control */ +#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE BIT(0) +#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE BIT(1) +#define ULPI_IFC_CTRL_CARKITMODE BIT(2) +#define ULPI_IFC_CTRL_CLOCKSUSPENDM BIT(3) +#define ULPI_IFC_CTRL_AUTORESUME BIT(4) +#define ULPI_IFC_CTRL_EXTERNAL_VBUS BIT(5) +#define ULPI_IFC_CTRL_PASSTHRU BIT(6) +#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE BIT(7) + +/* OTG Control */ +#define ULPI_OTG_CTRL_ID_PULLUP BIT(0) +#define ULPI_OTG_CTRL_DP_PULLDOWN BIT(1) +#define ULPI_OTG_CTRL_DM_PULLDOWN BIT(2) +#define ULPI_OTG_CTRL_DISCHRGVBUS BIT(3) +#define ULPI_OTG_CTRL_CHRGVBUS BIT(4) +#define ULPI_OTG_CTRL_DRVVBUS BIT(5) +#define ULPI_OTG_CTRL_DRVVBUS_EXT BIT(6) +#define ULPI_OTG_CTRL_EXTVBUSIND BIT(7) + +/* USB Interrupt Enable Rising, + * USB Interrupt Enable Falling, + * USB Interrupt Status and + * USB Interrupt Latch + */ +#define ULPI_INT_HOST_DISCONNECT BIT(0) +#define ULPI_INT_VBUS_VALID BIT(1) +#define ULPI_INT_SESS_VALID BIT(2) +#define ULPI_INT_SESS_END BIT(3) +#define ULPI_INT_IDGRD BIT(4) + +/* Debug */ +#define ULPI_DEBUG_LINESTATE0 BIT(0) +#define ULPI_DEBUG_LINESTATE1 BIT(1) + +/* Carkit Control */ +#define ULPI_CARKIT_CTRL_CARKITPWR BIT(0) +#define ULPI_CARKIT_CTRL_IDGNDDRV BIT(1) +#define ULPI_CARKIT_CTRL_TXDEN BIT(2) +#define ULPI_CARKIT_CTRL_RXDEN BIT(3) +#define ULPI_CARKIT_CTRL_SPKLEFTEN BIT(4) +#define ULPI_CARKIT_CTRL_SPKRIGHTEN BIT(5) +#define ULPI_CARKIT_CTRL_MICEN BIT(6) + +/* Carkit Interrupt Enable */ +#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE BIT(0) +#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL BIT(1) +#define ULPI_CARKIT_INT_EN_CARINTDET BIT(2) +#define ULPI_CARKIT_INT_EN_DP_RISE BIT(3) +#define ULPI_CARKIT_INT_EN_DP_FALL BIT(4) + +/* Carkit Interrupt Status and + * Carkit Interrupt Latch + */ +#define ULPI_CARKIT_INT_IDFLOAT BIT(0) +#define ULPI_CARKIT_INT_CARINTDET BIT(1) +#define ULPI_CARKIT_INT_DP BIT(2) + +/* Carkit Pulse Control*/ +#define ULPI_CARKIT_PLS_CTRL_TXPLSEN BIT(0) +#define ULPI_CARKIT_PLS_CTRL_RXPLSEN BIT(1) +#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN BIT(2) +#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN BIT(3) + +#endif /* __LINUX_ULPI_REGS_H */ |