16 files changed, 233 insertions, 82 deletions

diff --git a/include/linux/phy/phy-dp.h b/include/linux/phy/phy-dp.h
new file mode 100644
index 000000000000..18cad23642cd
--- /dev/null
+++ b/include/linux/phy/phy-dp.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Cadence Design Systems Inc.
+ */
+
+#ifndef __PHY_DP_H_
+#define __PHY_DP_H_
+
+#include <linux/types.h>
+
+/**
+ * struct phy_configure_opts_dp - DisplayPort PHY configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * DisplayPort phy.
+ */
+struct phy_configure_opts_dp {
+	/**
+	 * @link_rate:
+	 *
+	 * Link Rate, in Mb/s, of the main link.
+	 *
+	 * Allowed values: 1620, 2160, 2430, 2700, 3240, 4320, 5400, 8100 Mb/s
+	 */
+	unsigned int link_rate;
+
+	/**
+	 * @lanes:
+	 *
+	 * Number of active, consecutive, data lanes, starting from
+	 * lane 0, used for the transmissions on main link.
+	 *
+	 * Allowed values: 1, 2, 4
+	 */
+	unsigned int lanes;
+
+	/**
+	 * @voltage:
+	 *
+	 * Voltage swing levels, as specified by DisplayPort specification,
+	 * to be used by particular lanes. One value per lane.
+	 * voltage[0] is for lane 0, voltage[1] is for lane 1, etc.
+	 *
+	 * Maximum value: 3
+	 */
+	unsigned int voltage[4];
+
+	/**
+	 * @pre:
+	 *
+	 * Pre-emphasis levels, as specified by DisplayPort specification, to be
+	 * used by particular lanes. One value per lane.
+	 *
+	 * Maximum value: 3
+	 */
+	unsigned int pre[4];
+
+	/**
+	 * @ssc:
+	 *
+	 * Flag indicating, whether or not to enable spread-spectrum clocking.
+	 *
+	 */
+	u8 ssc : 1;
+
+	/**
+	 * @set_rate:
+	 *
+	 * Flag indicating, whether or not reconfigure link rate and SSC to
+	 * requested values.
+	 *
+	 */
+	u8 set_rate : 1;
+
+	/**
+	 * @set_lanes:
+	 *
+	 * Flag indicating, whether or not reconfigure lane count to
+	 * requested value.
+	 *
+	 */
+	u8 set_lanes : 1;
+
+	/**
+	 * @set_voltages:
+	 *
+	 * Flag indicating, whether or not reconfigure voltage swing
+	 * and pre-emphasis to requested values. Only lanes specified
+	 * by "lanes" parameter will be affected.
+	 *
+	 */
+	u8 set_voltages : 1;
+};
+
+#endif /* __PHY_DP_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 56d3a100006a..bcee8eba62b3 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -16,6 +16,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
+#include <linux/phy/phy-dp.h>
 #include <linux/phy/phy-mipi-dphy.h>
 
 struct phy;
@@ -40,6 +41,7 @@ enum phy_mode {
 	PHY_MODE_MIPI_DPHY,
 	PHY_MODE_SATA,
 	PHY_MODE_LVDS,
+	PHY_MODE_DP
 };
 
 /**
@@ -47,9 +49,12 @@ enum phy_mode {
  *
  * @mipi_dphy:	Configuration set applicable for phys supporting
  *		the MIPI_DPHY phy mode.
+ * @dp:		Configuration set applicable for phys supporting
+ *		the DisplayPort protocol.
  */
 union phy_configure_opts {
 	struct phy_configure_opts_mipi_dphy	mipi_dphy;
+	struct phy_configure_opts_dp		dp;
 };
 
 /**
@@ -234,7 +239,8 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
 			    const char *con_id);
 struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
 				     int index);
-void phy_put(struct phy *phy);
+void of_phy_put(struct phy *phy);
+void phy_put(struct device *dev, struct phy *phy);
 void devm_phy_put(struct device *dev, struct phy *phy);
 struct phy *of_phy_get(struct device_node *np, const char *con_id);
 struct phy *of_phy_simple_xlate(struct device *dev,
@@ -419,7 +425,11 @@ static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
 	return ERR_PTR(-ENOSYS);
 }
 
-static inline void phy_put(struct phy *phy)
+static inline void of_phy_put(struct phy *phy)
+{
+}
+
+static inline void phy_put(struct device *dev, struct phy *phy)
 {
 }
 
diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h
deleted file mode 100644
index 219bd79dabfc..000000000000
--- a/include/linux/platform_data/ehci-sh.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * EHCI SuperH driver platform data
- *
- * Copyright (C) 2012  Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- * Copyright (C) 2012  Renesas Solutions Corp.
- */
-
-#ifndef __USB_EHCI_SH_H
-#define __USB_EHCI_SH_H
-
-struct ehci_sh_platdata {
-	void (*phy_init)(void); /* Phy init function */
-};
-
-#endif /* __USB_EHCI_SH_H */
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index 5376b6d799d5..20d239c02bf3 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -6,14 +6,6 @@
 #ifndef __MV_PLATFORM_USB_H
 #define __MV_PLATFORM_USB_H
 
-enum pxa_ehci_type {
-	EHCI_UNDEFINED = 0,
-	PXA_U2OEHCI,	/* pxa 168, 9xx */
-	PXA_SPH,	/* pxa 168, 9xx SPH */
-	MMP3_HSIC,	/* mmp3 hsic */
-	MMP3_FSIC,	/* mmp3 fsic */
-};
-
 enum {
 	MV_USB_MODE_OTG,
 	MV_USB_MODE_HOST,
diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h
index e049d51c1353..d01ef97ddf36 100644
--- a/include/linux/platform_data/usb3503.h
+++ b/include/linux/platform_data/usb3503.h
@@ -17,9 +17,6 @@ enum usb3503_mode {
 struct usb3503_platform_data {
 	enum usb3503_mode	initial_mode;
 	u8	port_off_mask;
-	int	gpio_intn;
-	int	gpio_connect;
-	int	gpio_reset;
 };
 
 #endif
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
deleted file mode 100644
index 804fb06cf6d6..000000000000
--- a/include/linux/usb/gpio_vbus.h
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * A simple GPIO VBUS sensing driver for B peripheral only devices
- * with internal transceivers.
- * Optionally D+ pullup can be controlled by a second GPIO.
- *
- * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/**
- * struct gpio_vbus_mach_info - configuration for gpio_vbus
- * @gpio_vbus: VBUS sensing GPIO
- * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
- * @gpio_vbus_inverted: true if gpio_vbus is active low
- * @gpio_pullup_inverted: true if gpio_pullup is active low
- * @wakeup: configure gpio_vbus as a wake-up source
- *
- * The VBUS sensing GPIO should have a pulldown, which will normally be
- * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
- * value the GPIO detects as active.  Some systems will use comparators.
- */
-struct gpio_vbus_mach_info {
-	int gpio_vbus;
-	int gpio_pullup;
-	bool gpio_vbus_inverted;
-	bool gpio_pullup_inverted;
-	bool wakeup;
-};
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
index 396d2b043e64..556a801efce3 100644
--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor {
  * 6 - 115200 bps
  * 7 - 576000 bps
  * 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
  * 10..15 - Reserved
  */
 #define USB_IRDA_STATUS_LINK_SPEED	0x0f
 
+#define USB_IRDA_LS_NO_CHANGE		0
+#define USB_IRDA_LS_2400		1
+#define USB_IRDA_LS_9600		2
+#define USB_IRDA_LS_19200		3
+#define USB_IRDA_LS_38400		4
+#define USB_IRDA_LS_57600		5
+#define USB_IRDA_LS_115200		6
+#define USB_IRDA_LS_576000		7
+#define USB_IRDA_LS_1152000		8
+#define USB_IRDA_LS_4000000		9
+
 /* The following is a 4-bit value used only for
  * outbound header:
  *
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index 145c38e351c2..a665d7f21142 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -45,7 +45,8 @@ enum pd_data_msg_type {
 	PD_DATA_BATT_STATUS = 5,
 	PD_DATA_ALERT = 6,
 	PD_DATA_GET_COUNTRY_INFO = 7,
-	/* 8-14 Reserved */
+	PD_DATA_ENTER_USB = 8,
+	/* 9-14 Reserved */
 	PD_DATA_VENDOR_DEF = 15,
 	/* 16-31 Reserved */
 };
@@ -418,6 +419,36 @@ static inline unsigned int rdo_max_power(u32 rdo)
 	return ((rdo >> RDO_BATT_MAX_PWR_SHIFT) & RDO_PWR_MASK) * 250;
 }
 
+/* Enter_USB Data Object */
+#define EUDO_USB_MODE_MASK		GENMASK(30, 28)
+#define EUDO_USB_MODE_SHIFT		28
+#define   EUDO_USB_MODE_USB2		0
+#define   EUDO_USB_MODE_USB3		1
+#define   EUDO_USB_MODE_USB4		2
+#define EUDO_USB4_DRD			BIT(26)
+#define EUDO_USB3_DRD			BIT(25)
+#define EUDO_CABLE_SPEED_MASK		GENMASK(23, 21)
+#define EUDO_CABLE_SPEED_SHIFT		21
+#define   EUDO_CABLE_SPEED_USB2		0
+#define   EUDO_CABLE_SPEED_USB3_GEN1	1
+#define   EUDO_CABLE_SPEED_USB4_GEN2	2
+#define   EUDO_CABLE_SPEED_USB4_GEN3	3
+#define EUDO_CABLE_TYPE_MASK		GENMASK(20, 19)
+#define EUDO_CABLE_TYPE_SHIFT		19
+#define   EUDO_CABLE_TYPE_PASSIVE	0
+#define   EUDO_CABLE_TYPE_RE_TIMER	1
+#define   EUDO_CABLE_TYPE_RE_DRIVER	2
+#define   EUDO_CABLE_TYPE_OPTICAL	3
+#define EUDO_CABLE_CURRENT_MASK		GENMASK(18, 17)
+#define EUDO_CABLE_CURRENT_SHIFT	17
+#define   EUDO_CABLE_CURRENT_NOTSUPP	0
+#define   EUDO_CABLE_CURRENT_3A		2
+#define   EUDO_CABLE_CURRENT_5A		3
+#define EUDO_PCIE_SUPPORT		BIT(16)
+#define EUDO_DP_SUPPORT			BIT(15)
+#define EUDO_TBT_SUPPORT		BIT(14)
+#define EUDO_HOST_PRESENT		BIT(13)
+
 /* USB PD timers and counters */
 #define PD_T_NO_RESPONSE	5000	/* 4.5 - 5.5 seconds */
 #define PD_T_DB_DETECT		10000	/* 10 - 15 seconds */
diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h
index 781f4e98dd23..35b8e15efaa0 100644
--- a/include/linux/usb/pd_vdo.h
+++ b/include/linux/usb/pd_vdo.h
@@ -140,6 +140,38 @@
 #define PD_PRODUCT_PID(vdo)	(((vdo) >> 16) & 0xffff)
 
 /*
+ * UFP VDO1
+ * --------
+ * <31:29> :: UFP VDO version
+ * <28>    :: Reserved
+ * <27:24> :: Device capability
+ * <23:6>  :: Reserved
+ * <5:3>   :: Alternate modes
+ * <2:0>   :: USB highest speed
+ */
+#define PD_VDO1_UFP_DEVCAP(vdo)	(((vdo) & GENMASK(27, 24)) >> 24)
+
+#define DEV_USB2_CAPABLE	BIT(0)
+#define DEV_USB2_BILLBOARD	BIT(1)
+#define DEV_USB3_CAPABLE	BIT(2)
+#define DEV_USB4_CAPABLE	BIT(3)
+
+/*
+ * DFP VDO
+ * --------
+ * <31:29> :: DFP VDO version
+ * <28:27> :: Reserved
+ * <26:24> :: Host capability
+ * <23:5>  :: Reserved
+ * <4:0>   :: Port number
+ */
+#define PD_VDO_DFP_HOSTCAP(vdo)	(((vdo) & GENMASK(26, 24)) >> 24)
+
+#define HOST_USB2_CAPABLE	BIT(0)
+#define HOST_USB3_CAPABLE	BIT(1)
+#define HOST_USB4_CAPABLE	BIT(2)
+
+/*
  * Cable VDO
  * ---------
  * <31:28> :: Cable HW version
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 6914475bbc86..d418c55523a7 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -170,8 +170,6 @@ struct renesas_usbhs_driver_param {
 	 */
 	int pio_dma_border; /* default is 64byte */
 
-	u32 enable_gpio;
-
 	/*
 	 * option:
 	 */
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index 0c5c3ea8b2d7..c29d1b4c9381 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -17,6 +17,7 @@
 #define __TEGRA_USB_PHY_H
 
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #include <linux/reset.h>
 #include <linux/usb/otg.h>
 
@@ -76,8 +77,9 @@ struct tegra_usb_phy {
 	struct usb_phy u_phy;
 	bool is_legacy_phy;
 	bool is_ulpi_phy;
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
 	struct reset_control *pad_rst;
+	bool powered_on;
 };
 
 void tegra_usb_phy_preresume(struct usb_phy *phy);
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
index 0f52723a11bd..c358b3fd05c9 100644
--- a/include/linux/usb/typec.h
+++ b/include/linux/usb/typec.h
@@ -9,6 +9,9 @@
 #define USB_TYPEC_REV_1_0	0x100 /* 1.0 */
 #define USB_TYPEC_REV_1_1	0x110 /* 1.1 */
 #define USB_TYPEC_REV_1_2	0x120 /* 1.2 */
+#define USB_TYPEC_REV_1_3	0x130 /* 1.3 */
+#define USB_TYPEC_REV_1_4	0x140 /* 1.4 */
+#define USB_TYPEC_REV_2_0	0x200 /* 2.0 */
 
 struct typec_partner;
 struct typec_cable;
@@ -74,6 +77,7 @@ enum typec_orientation {
  * @id_header: ID Header VDO
  * @cert_stat: Cert Stat VDO
  * @product: Product VDO
+ * @vdo: Product Type Specific VDOs
  *
  * USB power delivery Discover Identity command response data.
  *
@@ -84,6 +88,7 @@ struct usb_pd_identity {
 	u32			id_header;
 	u32			cert_stat;
 	u32			product;
+	u32			vdo[3];
 };
 
 int typec_partner_set_identity(struct typec_partner *partner);
@@ -230,6 +235,10 @@ struct typec_cable *typec_register_cable(struct typec_port *port,
 					 struct typec_cable_desc *desc);
 void typec_unregister_cable(struct typec_cable *cable);
 
+struct typec_cable *typec_cable_get(struct typec_port *port);
+void typec_cable_put(struct typec_cable *cable);
+int typec_cable_is_active(struct typec_cable *cable);
+
 struct typec_plug *typec_register_plug(struct typec_cable *cable,
 				       struct typec_plug_desc *desc);
 void typec_unregister_plug(struct typec_plug *plug);
diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h
index 9a88c74a1d0d..923ff3af0628 100644
--- a/include/linux/usb/typec_altmode.h
+++ b/include/linux/usb/typec_altmode.h
@@ -55,7 +55,7 @@ static inline void *typec_altmode_get_drvdata(struct typec_altmode *altmode)
  * @activate: User callback for Enter/Exit Mode
  */
 struct typec_altmode_ops {
-	int (*enter)(struct typec_altmode *altmode);
+	int (*enter)(struct typec_altmode *altmode, u32 *vdo);
 	int (*exit)(struct typec_altmode *altmode);
 	void (*attention)(struct typec_altmode *altmode, u32 vdo);
 	int (*vdm)(struct typec_altmode *altmode, const u32 hdr,
@@ -65,7 +65,7 @@ struct typec_altmode_ops {
 	int (*activate)(struct typec_altmode *altmode, int activate);
 };
 
-int typec_altmode_enter(struct typec_altmode *altmode);
+int typec_altmode_enter(struct typec_altmode *altmode, u32 *vdo);
 int typec_altmode_exit(struct typec_altmode *altmode);
 void typec_altmode_attention(struct typec_altmode *altmode, u32 vdo);
 int typec_altmode_vdm(struct typec_altmode *altmode,
@@ -101,6 +101,22 @@ enum {
 	TYPEC_MODE_DEBUG,			/* Debug Accessory */
 };
 
+/*
+ * USB4 also requires that the pins on the connector are repurposed, just like
+ * Alternate Modes. USB4 mode is however not entered with the Enter Mode Command
+ * like the Alternate Modes are, but instead with a special Enter_USB Message.
+ * The Enter_USB Message can also be used for setting to connector to operate in
+ * USB 3.2 or in USB 2.0 mode instead of USB4.
+ *
+ * The Enter_USB specific "USB Modes" are also supplied here as special modal
+ * state values, just like the Accessory Modes.
+ */
+enum {
+	TYPEC_MODE_USB2 = TYPEC_MODE_DEBUG,	/* USB 2.0 mode */
+	TYPEC_MODE_USB3,			/* USB 3.2 mode */
+	TYPEC_MODE_USB4				/* USB4 mode */
+};
+
 #define TYPEC_MODAL_STATE(_state_)	((_state_) + TYPEC_STATE_MODAL)
 
 struct typec_altmode *typec_altmode_get_plug(struct typec_altmode *altmode,
diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h
index 873ace5b0cf8..be7292c0be5e 100644
--- a/include/linux/usb/typec_mux.h
+++ b/include/linux/usb/typec_mux.h
@@ -8,6 +8,7 @@
 struct device;
 struct typec_mux;
 struct typec_switch;
+struct typec_altmode;
 struct fwnode_handle;
 
 typedef int (*typec_switch_set_fn_t)(struct typec_switch *sw,
@@ -29,7 +30,14 @@ void typec_switch_unregister(struct typec_switch *sw);
 void typec_switch_set_drvdata(struct typec_switch *sw, void *data);
 void *typec_switch_get_drvdata(struct typec_switch *sw);
 
-typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux, int state);
+struct typec_mux_state {
+	struct typec_altmode *alt;
+	unsigned long mode;
+	void *data;
+};
+
+typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux,
+				  struct typec_mux_state *state);
 
 struct typec_mux_desc {
 	struct fwnode_handle *fwnode;
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index c515765adab7..36c2982780ad 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -55,12 +55,23 @@
 #if IS_ENABLED(CONFIG_USB_ULPI)
 struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
 					unsigned int flags);
+
+struct usb_phy *devm_otg_ulpi_create(struct device *dev,
+				     struct usb_phy_io_ops *ops,
+				     unsigned int flags);
 #else
 static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
 					      unsigned int flags)
 {
 	return NULL;
 }
+
+static inline struct usb_phy *devm_otg_ulpi_create(struct device *dev,
+						   struct usb_phy_io_ops *ops,
+						   unsigned int flags)
+{
+	return NULL;
+}
 #endif
 
 #ifdef CONFIG_USB_ULPI_VIEWPORT
diff --git a/include/linux/usb/usb_phy_generic.h b/include/linux/usb/usb_phy_generic.h
index 7408cf52c710..cd9e70a552a0 100644
--- a/include/linux/usb/usb_phy_generic.h
+++ b/include/linux/usb/usb_phy_generic.h
@@ -3,18 +3,6 @@
 #define __LINUX_USB_NOP_XCEIV_H
 
 #include <linux/usb/otg.h>
-#include <linux/gpio/consumer.h>
-
-struct usb_phy_generic_platform_data {
-	enum usb_phy_type type;
-	unsigned long clk_rate;
-
-	/* if set fails with -EPROBE_DEFER if can't get regulator */
-	unsigned int needs_vcc:1;
-	unsigned int needs_reset:1;	/* deprecated */
-	int gpio_reset;
-	struct gpio_desc *gpiod_vbus;
-};
 
 #if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
 /* sometimes transceivers are accessed only through e.g. ULPI */