diff options
Diffstat (limited to 'include/media/cec.h')
| -rw-r--r-- | include/media/cec.h | 84 |
1 files changed, 78 insertions, 6 deletions
diff --git a/include/media/cec.h b/include/media/cec.h index 972bc8cd4384..abee41ae02d0 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -26,13 +26,17 @@ * @dev: cec device * @cdev: cec character device * @minor: device node minor number + * @lock: lock to serialize open/release and registration * @registered: the device was correctly registered * @unregistered: the device was unregistered - * @fhs_lock: lock to control access to the filehandle list + * @lock_fhs: lock to control access to @fhs * @fhs: the list of open filehandles (cec_fh) * * This structure represents a cec-related device node. * + * To add or remove filehandles from @fhs the @lock must be taken first, + * followed by @lock_fhs. It is safe to access @fhs if either lock is held. + * * The @parent is a physical device. It must be set by core or device drivers * before registering the node. */ @@ -43,10 +47,13 @@ struct cec_devnode { /* device info */ int minor; + /* serialize open/release and registration */ + struct mutex lock; bool registered; bool unregistered; + /* protect access to fhs */ + struct mutex lock_fhs; struct list_head fhs; - struct mutex lock; }; struct cec_adapter; @@ -111,6 +118,7 @@ struct cec_adap_ops { int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable); int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable); int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); + void (*adap_configured)(struct cec_adapter *adap, bool configured); int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg); void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); @@ -144,6 +152,69 @@ struct cec_adap_ops { */ #define CEC_MAX_MSG_TX_QUEUE_SZ (18 * 1) +/** + * struct cec_adapter - cec adapter structure + * @owner: module owner + * @name: name of the CEC adapter + * @devnode: device node for the /dev/cecX device + * @lock: mutex controlling access to this structure + * @rc: remote control device + * @transmit_queue: queue of pending transmits + * @transmit_queue_sz: number of pending transmits + * @wait_queue: queue of transmits waiting for a reply + * @transmitting: CEC messages currently being transmitted + * @transmit_in_progress: true if a transmit is in progress + * @transmit_in_progress_aborted: true if a transmit is in progress is to be + * aborted. This happens if the logical address is + * invalidated while the transmit is ongoing. In that + * case the transmit will finish, but will not retransmit + * and be marked as ABORTED. + * @xfer_timeout_ms: the transfer timeout in ms. + * If 0, then timeout after 2.1 ms. + * @kthread_config: kthread used to configure a CEC adapter + * @config_completion: used to signal completion of the config kthread + * @kthread: main CEC processing thread + * @kthread_waitq: main CEC processing wait_queue + * @ops: cec adapter ops + * @priv: cec driver's private data + * @capabilities: cec adapter capabilities + * @available_log_addrs: maximum number of available logical addresses + * @phys_addr: the current physical address + * @needs_hpd: if true, then the HDMI HotPlug Detect pin must be high + * in order to transmit or receive CEC messages. This is usually a HW + * limitation. + * @is_enabled: the CEC adapter is enabled + * @is_configuring: the CEC adapter is configuring (i.e. claiming LAs) + * @must_reconfigure: while configuring, the PA changed, so reclaim LAs + * @is_configured: the CEC adapter is configured (i.e. has claimed LAs) + * @cec_pin_is_high: if true then the CEC pin is high. Only used with the + * CEC pin framework. + * @adap_controls_phys_addr: if true, then the CEC adapter controls the + * physical address, i.e. the CEC hardware can detect HPD changes and + * read the EDID and is not dependent on an external HDMI driver. + * Drivers that need this can set this field to true after the + * cec_allocate_adapter() call. + * @last_initiator: the initiator of the last transmitted message. + * @monitor_all_cnt: number of filehandles monitoring all msgs + * @monitor_pin_cnt: number of filehandles monitoring pin changes + * @follower_cnt: number of filehandles in follower mode + * @cec_follower: filehandle of the exclusive follower + * @cec_initiator: filehandle of the exclusive initiator + * @passthrough: if true, then the exclusive follower is in + * passthrough mode. + * @log_addrs: current logical addresses + * @conn_info: current connector info + * @tx_timeouts: number of transmit timeouts + * @notifier: CEC notifier + * @pin: CEC pin status struct + * @cec_dir: debugfs cec directory + * @status_file: debugfs cec status file + * @error_inj_file: debugfs cec error injection file + * @sequence: transmit sequence counter + * @input_phys: remote control input_phys name + * + * This structure represents a cec adapter. + */ struct cec_adapter { struct module *owner; char name[32]; @@ -156,13 +227,14 @@ struct cec_adapter { struct list_head wait_queue; struct cec_data *transmitting; bool transmit_in_progress; + bool transmit_in_progress_aborted; + unsigned int xfer_timeout_ms; struct task_struct *kthread_config; struct completion config_completion; struct task_struct *kthread; wait_queue_head_t kthread_waitq; - wait_queue_head_t waitq; const struct cec_adap_ops *ops; void *priv; @@ -171,9 +243,12 @@ struct cec_adapter { u16 phys_addr; bool needs_hpd; + bool is_enabled; bool is_configuring; + bool must_reconfigure; bool is_configured; bool cec_pin_is_high; + bool adap_controls_phys_addr; u8 last_initiator; u32 monitor_all_cnt; u32 monitor_pin_cnt; @@ -194,10 +269,7 @@ struct cec_adapter { #endif struct dentry *cec_dir; - struct dentry *status_file; - struct dentry *error_inj_file; - u16 phys_addrs[15]; u32 sequence; char input_phys[32]; |