diff options
Diffstat (limited to 'include/soc/at91/sama7-ddr.h')
| -rw-r--r-- | include/soc/at91/sama7-ddr.h | 23 |
1 files changed, 14 insertions, 9 deletions
diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h index f6542584ca13..6ce3bd22f6c6 100644 --- a/include/soc/at91/sama7-ddr.h +++ b/include/soc/at91/sama7-ddr.h @@ -11,15 +11,13 @@ #ifndef __SAMA7_DDR_H__ #define __SAMA7_DDR_H__ -#ifdef CONFIG_SOC_SAMA7 - /* DDR3PHY */ #define DDR3PHY_PIR (0x04) /* DDR3PHY PHY Initialization Register */ -#define DDR3PHY_PIR_DLLBYP (1 << 17) /* DLL Bypass */ +#define DDR3PHY_PIR_DLLBYP (1 << 17) /* DLL Bypass */ #define DDR3PHY_PIR_ITMSRST (1 << 4) /* Interface Timing Module Soft Reset */ -#define DDR3PHY_PIR_DLLLOCK (1 << 2) /* DLL Lock */ +#define DDR3PHY_PIR_DLLLOCK (1 << 2) /* DLL Lock */ #define DDR3PHY_PIR_DLLSRST (1 << 1) /* DLL Soft Rest */ -#define DDR3PHY_PIR_INIT (1 << 0) /* Initialization Trigger */ +#define DDR3PHY_PIR_INIT (1 << 0) /* Initialization Trigger */ #define DDR3PHY_PGCR (0x08) /* DDR3PHY PHY General Configuration Register */ #define DDR3PHY_PGCR_CKDV1 (1 << 13) /* CK# Disable Value */ @@ -40,6 +38,14 @@ #define DDR3PHY_DSGCR_ODTPDD_ODT0 (1 << 20) /* ODT[0] Power Down Driver */ #define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */ +#define DDR3PHY_ZQ0SR0_PDO_OFF (0) /* Pull-down output impedance select offset */ +#define DDR3PHY_ZQ0SR0_PUO_OFF (5) /* Pull-up output impedance select offset */ +#define DDR3PHY_ZQ0SR0_PDODT_OFF (10) /* Pull-down on-die termination impedance select offset */ +#define DDR3PHY_ZQ0SRO_PUODT_OFF (15) /* Pull-up on-die termination impedance select offset */ + +#define DDR3PHY_DX0DLLCR (0x1CC) /* DDR3PHY DATX8 DLL Control Register */ +#define DDR3PHY_DX1DLLCR (0x20C) /* DDR3PHY DATX8 DLL Control Register */ +#define DDR3PHY_DXDLLCR_DLLDIS (1 << 31) /* DLL Disable */ /* UDDRC */ #define UDDRC_STAT (0x04) /* UDDRC Operating Mode Status Register */ @@ -55,7 +61,8 @@ #define UDDRC_STAT_OPMODE_MSK (0x7 << 0) /* Operating mode mask */ #define UDDRC_PWRCTL (0x30) /* UDDRC Low Power Control Register */ -#define UDDRC_PWRCTRL_SELFREF_SW (1 << 5) /* Software self-refresh */ +#define UDDRC_PWRCTL_SELFREF_EN (1 << 0) /* Automatic self-refresh */ +#define UDDRC_PWRCTL_SELFREF_SW (1 << 5) /* Software self-refresh */ #define UDDRC_DFIMISC (0x1B0) /* UDDRC DFI Miscellaneous Control Register */ #define UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN (1 << 0) /* PHY initialization complete enable signal */ @@ -67,7 +74,7 @@ #define UDDRC_SWSTAT_SW_DONE_ACK (1 << 0) /* Register programming done */ #define UDDRC_PSTAT (0x3FC) /* UDDRC Port Status Register */ -#define UDDRC_PSTAT_ALL_PORTS (0x1F001F) /* Read + writes outstanding transactions on all ports */ +#define UDDRC_PSTAT_ALL_PORTS (0x1F001F) /* Read + writes outstanding transactions on all ports */ #define UDDRC_PCTRL_0 (0x490) /* UDDRC Port 0 Control Register */ #define UDDRC_PCTRL_1 (0x540) /* UDDRC Port 1 Control Register */ @@ -75,6 +82,4 @@ #define UDDRC_PCTRL_3 (0x6A0) /* UDDRC Port 3 Control Register */ #define UDDRC_PCTRL_4 (0x750) /* UDDRC Port 4 Control Register */ -#endif /* CONFIG_SOC_SAMA7 */ - #endif /* __SAMA7_DDR_H__ */ |