diff options
Diffstat (limited to 'include/uapi/linux/can')
| -rw-r--r-- | include/uapi/linux/can/bcm.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/can/error.h | 20 | ||||
| -rw-r--r-- | include/uapi/linux/can/isotp.h | 55 | ||||
| -rw-r--r-- | include/uapi/linux/can/raw.h | 1 |
4 files changed, 57 insertions, 21 deletions
diff --git a/include/uapi/linux/can/bcm.h b/include/uapi/linux/can/bcm.h index dd2b925b09ac..f1e45f533a72 100644 --- a/include/uapi/linux/can/bcm.h +++ b/include/uapi/linux/can/bcm.h @@ -71,7 +71,7 @@ struct bcm_msg_head { struct bcm_timeval ival1, ival2; canid_t can_id; __u32 nframes; - struct can_frame frames[0]; + struct can_frame frames[]; }; enum { diff --git a/include/uapi/linux/can/error.h b/include/uapi/linux/can/error.h index 34633283de64..acc1ac393d2a 100644 --- a/include/uapi/linux/can/error.h +++ b/include/uapi/linux/can/error.h @@ -57,6 +57,8 @@ #define CAN_ERR_BUSOFF 0x00000040U /* bus off */ #define CAN_ERR_BUSERROR 0x00000080U /* bus error (may flood!) */ #define CAN_ERR_RESTARTED 0x00000100U /* controller restarted */ +#define CAN_ERR_CNT 0x00000200U /* TX error counter / data[6] */ + /* RX error counter / data[7] */ /* arbitration lost in bit ... / data[0] */ #define CAN_ERR_LOSTARB_UNSPEC 0x00 /* unspecified */ @@ -120,6 +122,22 @@ #define CAN_ERR_TRX_CANL_SHORT_TO_GND 0x70 /* 0111 0000 */ #define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */ -/* controller specific additional information / data[5..7] */ +/* data[5] is reserved (do not use) */ + +/* TX error counter / data[6] */ +/* RX error counter / data[7] */ + +/* CAN state thresholds + * + * Error counter Error state + * ----------------------------------- + * 0 - 95 Error-active + * 96 - 127 Error-warning + * 128 - 255 Error-passive + * 256 and greater Bus-off + */ +#define CAN_ERROR_WARNING_THRESHOLD 96 +#define CAN_ERROR_PASSIVE_THRESHOLD 128 +#define CAN_BUS_OFF_THRESHOLD 256 #endif /* _UAPI_CAN_ERROR_H */ diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h index c55935b64ccc..439c982f7e81 100644 --- a/include/uapi/linux/can/isotp.h +++ b/include/uapi/linux/can/isotp.h @@ -124,33 +124,30 @@ struct can_isotp_ll_options { /* flags for isotp behaviour */ -#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */ -#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */ -#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */ -#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */ -#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */ -#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */ -#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */ -#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */ -#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ -#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ -#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ -#define CAN_ISOTP_SF_BROADCAST 0x800 /* 1-to-N functional addressing */ - -/* default values */ +#define CAN_ISOTP_LISTEN_MODE 0x0001 /* listen only (do not send FC) */ +#define CAN_ISOTP_EXTEND_ADDR 0x0002 /* enable extended addressing */ +#define CAN_ISOTP_TX_PADDING 0x0004 /* enable CAN frame padding tx path */ +#define CAN_ISOTP_RX_PADDING 0x0008 /* enable CAN frame padding rx path */ +#define CAN_ISOTP_CHK_PAD_LEN 0x0010 /* check received CAN frame padding */ +#define CAN_ISOTP_CHK_PAD_DATA 0x0020 /* check received CAN frame padding */ +#define CAN_ISOTP_HALF_DUPLEX 0x0040 /* half duplex error state handling */ +#define CAN_ISOTP_FORCE_TXSTMIN 0x0080 /* ignore stmin from received FC */ +#define CAN_ISOTP_FORCE_RXSTMIN 0x0100 /* ignore CFs depending on rx stmin */ +#define CAN_ISOTP_RX_EXT_ADDR 0x0200 /* different rx extended addressing */ +#define CAN_ISOTP_WAIT_TX_DONE 0x0400 /* wait for tx completion */ +#define CAN_ISOTP_SF_BROADCAST 0x0800 /* 1-to-N functional addressing */ +#define CAN_ISOTP_CF_BROADCAST 0x1000 /* 1-to-N transmission w/o FC */ + +/* protocol machine default values */ #define CAN_ISOTP_DEFAULT_FLAGS 0 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00 #define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */ -#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0 +#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000 /* 50 micro seconds */ #define CAN_ISOTP_DEFAULT_RECV_BS 0 #define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0 -#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU -#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN -#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 - /* * Remark on CAN_ISOTP_DEFAULT_RECV_* values: * @@ -162,4 +159,24 @@ struct can_isotp_ll_options { * consistency and copied directly into the flow control (FC) frame. */ +/* link layer default values => make use of Classical CAN frames */ + +#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU +#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN +#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 + +/* + * The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as + * it only makes sense for isotp implementation tests to run without + * a N_As value. As user space applications usually do not set the + * frame_txtime element of struct can_isotp_options the new in-kernel + * default is very likely overwritten with zero when the sockopt() + * CAN_ISOTP_OPTS is invoked. + * To make sure that a N_As value of zero is only set intentional the + * value '0' is now interpreted as 'do not change the current value'. + * When a frame_txtime of zero is required for testing purposes this + * CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime. + */ +#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF + #endif /* !_UAPI_CAN_ISOTP_H */ diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h index 3386aa81fdf2..ff12f525c37c 100644 --- a/include/uapi/linux/can/raw.h +++ b/include/uapi/linux/can/raw.h @@ -62,6 +62,7 @@ enum { CAN_RAW_RECV_OWN_MSGS, /* receive my own msgs (default:off) */ CAN_RAW_FD_FRAMES, /* allow CAN FD frames (default:off) */ CAN_RAW_JOIN_FILTERS, /* all filters must match to trigger */ + CAN_RAW_XL_FRAMES, /* allow CAN XL frames (default:off) */ }; #endif /* !_UAPI_CAN_RAW_H */ |