diff options
Diffstat (limited to 'include/uapi/linux')
25 files changed, 821 insertions, 141 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 72c453a8bf50..91c43884f295 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -133,6 +133,14 @@ enum bpf_map_type { BPF_MAP_TYPE_STACK, }; +/* Note that tracing related programs such as + * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT} + * are not subject to a stable API since kernel internal data + * structures can change from release to release and may + * therefore break existing tracing BPF programs. Tracing BPF + * programs correspond to /a/ specific kernel which is to be + * analyzed, and not /a/ specific kernel /and/ all future ones. + */ enum bpf_prog_type { BPF_PROG_TYPE_UNSPEC, BPF_PROG_TYPE_SOCKET_FILTER, @@ -232,6 +240,20 @@ enum bpf_attach_type { */ #define BPF_F_STRICT_ALIGNMENT (1U << 0) +/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the + * verifier will allow any alignment whatsoever. On platforms + * with strict alignment requirements for loads ands stores (such + * as sparc and mips) the verifier validates that all loads and + * stores provably follow this requirement. This flag turns that + * checking and enforcement off. + * + * It is mostly used for testing when we want to validate the + * context and memory access aspects of the verifier, but because + * of an unaligned access the alignment check would trigger before + * the one we are interested in. + */ +#define BPF_F_ANY_ALIGNMENT (1U << 1) + /* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */ #define BPF_PSEUDO_MAP_FD 1 @@ -257,9 +279,6 @@ enum bpf_attach_type { /* Specify numa node during map creation */ #define BPF_F_NUMA_NODE (1U << 2) -/* flags for BPF_PROG_QUERY */ -#define BPF_F_QUERY_EFFECTIVE (1U << 0) - #define BPF_OBJ_NAME_LEN 16U /* Flags for accessing BPF object */ @@ -269,6 +288,12 @@ enum bpf_attach_type { /* Flag for stack_map, store build_id+offset instead of pointer */ #define BPF_F_STACK_BUILD_ID (1U << 5) +/* Zero-initialize hash function seed. This should only be used for testing. */ +#define BPF_F_ZERO_SEED (1U << 6) + +/* flags for BPF_PROG_QUERY */ +#define BPF_F_QUERY_EFFECTIVE (1U << 0) + enum bpf_stack_build_id_status { /* user space need an empty entry to identify end of a trace */ BPF_STACK_BUILD_ID_EMPTY = 0, @@ -326,7 +351,7 @@ union bpf_attr { __u32 log_level; /* verbosity level of verifier */ __u32 log_size; /* size of user buffer */ __aligned_u64 log_buf; /* user supplied buffer */ - __u32 kern_version; /* checked when prog_type=kprobe */ + __u32 kern_version; /* not used */ __u32 prog_flags; char prog_name[BPF_OBJ_NAME_LEN]; __u32 prog_ifindex; /* ifindex of netdev to prep for */ @@ -335,6 +360,13 @@ union bpf_attr { * (context accesses, allowed helpers, etc). */ __u32 expected_attach_type; + __u32 prog_btf_fd; /* fd pointing to BTF type data */ + __u32 func_info_rec_size; /* userspace bpf_func_info size */ + __aligned_u64 func_info; /* func info */ + __u32 func_info_cnt; /* number of bpf_func_info records */ + __u32 line_info_rec_size; /* userspace bpf_line_info size */ + __aligned_u64 line_info; /* line info */ + __u32 line_info_cnt; /* number of bpf_line_info records */ }; struct { /* anonymous struct used by BPF_OBJ_* commands */ @@ -353,8 +385,11 @@ union bpf_attr { struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ __u32 prog_fd; __u32 retval; - __u32 data_size_in; - __u32 data_size_out; + __u32 data_size_in; /* input: len of data_in */ + __u32 data_size_out; /* input/output: len of data_out + * returns ENOSPC if data_out + * is too small. + */ __aligned_u64 data_in; __aligned_u64 data_out; __u32 repeat; @@ -475,18 +510,6 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_map_pop_elem(struct bpf_map *map, void *value) - * Description - * Pop an element from *map*. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_map_peek_elem(struct bpf_map *map, void *value) - * Description - * Get an element from *map* without removing it. - * Return - * 0 on success, or a negative error in case of failure. - * * int bpf_probe_read(void *dst, u32 size, const void *src) * Description * For tracing programs, safely attempt to read *size* bytes from @@ -1910,9 +1933,9 @@ union bpf_attr { * is set to metric from route (IPv4/IPv6 only), and ifindex * is set to the device index of the nexthop from the FIB lookup. * - * *plen* argument is the size of the passed in struct. - * *flags* argument can be a combination of one or more of the - * following values: + * *plen* argument is the size of the passed in struct. + * *flags* argument can be a combination of one or more of the + * following values: * * **BPF_FIB_LOOKUP_DIRECT** * Do a direct table lookup vs full lookup using FIB @@ -1921,9 +1944,9 @@ union bpf_attr { * Perform lookup from an egress perspective (default is * ingress). * - * *ctx* is either **struct xdp_md** for XDP programs or - * **struct sk_buff** tc cls_act programs. - * Return + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** tc cls_act programs. + * Return * * < 0 if any input argument is invalid * * 0 on success (packet is forwarded, nexthop neighbor exists) * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the @@ -2068,8 +2091,8 @@ union bpf_attr { * translated to a keycode using the rc keymap, and reported as * an input key down event. After a period a key up event is * generated. This period can be extended by calling either - * **bpf_rc_keydown** () again with the same values, or calling - * **bpf_rc_repeat** (). + * **bpf_rc_keydown**\ () again with the same values, or calling + * **bpf_rc_repeat**\ (). * * Some protocols include a toggle bit, in case the button was * released and pressed again between consecutive scancodes. @@ -2152,21 +2175,22 @@ union bpf_attr { * The *flags* meaning is specific for each map type, * and has to be 0 for cgroup local storage. * - * Depending on the bpf program type, a local storage area - * can be shared between multiple instances of the bpf program, + * Depending on the BPF program type, a local storage area + * can be shared between multiple instances of the BPF program, * running simultaneously. * * A user should care about the synchronization by himself. - * For example, by using the BPF_STX_XADD instruction to alter + * For example, by using the **BPF_STX_XADD** instruction to alter * the shared data. * Return - * Pointer to the local storage area. + * A pointer to the local storage area. * * int bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) * Description - * Select a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY map - * It checks the selected sk is matching the incoming - * request in the skb. + * Select a **SO_REUSEPORT** socket from a + * **BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*. + * It checks the selected socket is matching the incoming + * request in the socket buffer. * Return * 0 on success, or a negative error in case of failure. * @@ -2174,7 +2198,7 @@ union bpf_attr { * Description * Look for TCP socket matching *tuple*, optionally in a child * network namespace *netns*. The return value must be checked, - * and if non-NULL, released via **bpf_sk_release**\ (). + * and if non-**NULL**, released via **bpf_sk_release**\ (). * * The *ctx* should point to the context of the program, such as * the skb or socket (depending on the hook in use). This is used @@ -2202,15 +2226,15 @@ union bpf_attr { * This helper is available only if the kernel was compiled with * **CONFIG_NET** configuration option. * Return - * Pointer to *struct bpf_sock*, or NULL in case of failure. - * For sockets with reuseport option, the *struct bpf_sock* - * result is from reuse->socks[] using the hash of the tuple. + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from **reuse->socks**\ [] using the hash of the tuple. * * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) * Description * Look for UDP socket matching *tuple*, optionally in a child * network namespace *netns*. The return value must be checked, - * and if non-NULL, released via **bpf_sk_release**\ (). + * and if non-**NULL**, released via **bpf_sk_release**\ (). * * The *ctx* should point to the context of the program, such as * the skb or socket (depending on the hook in use). This is used @@ -2238,33 +2262,71 @@ union bpf_attr { * This helper is available only if the kernel was compiled with * **CONFIG_NET** configuration option. * Return - * Pointer to *struct bpf_sock*, or NULL in case of failure. - * For sockets with reuseport option, the *struct bpf_sock* - * result is from reuse->socks[] using the hash of the tuple. + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from **reuse->socks**\ [] using the hash of the tuple. * - * int bpf_sk_release(struct bpf_sock *sk) + * int bpf_sk_release(struct bpf_sock *sock) * Description - * Release the reference held by *sock*. *sock* must be a non-NULL - * pointer that was returned from bpf_sk_lookup_xxx\ (). + * Release the reference held by *sock*. *sock* must be a + * non-**NULL** pointer that was returned from + * **bpf_sk_lookup_xxx**\ (). * Return * 0 on success, or a negative error in case of failure. * + * int bpf_map_pop_elem(struct bpf_map *map, void *value) + * Description + * Pop an element from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_map_peek_elem(struct bpf_map *map, void *value) + * Description + * Get an element from *map* without removing it. + * Return + * 0 on success, or a negative error in case of failure. + * * int bpf_msg_push_data(struct sk_buff *skb, u32 start, u32 len, u64 flags) * Description - * For socket policies, insert *len* bytes into msg at offset + * For socket policies, insert *len* bytes into *msg* at offset * *start*. * * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a - * *msg* it may want to insert metadata or options into the msg. + * *msg* it may want to insert metadata or options into the *msg*. * This can later be read and used by any of the lower layer BPF * hooks. * * This helper may fail if under memory pressure (a malloc * fails) in these cases BPF programs will get an appropriate * error and BPF programs will need to handle them. + * Return + * 0 on success, or a negative error in case of failure. * + * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 pop, u64 flags) + * Description + * Will remove *pop* bytes from a *msg* starting at byte *start*. + * This may result in **ENOMEM** errors under certain situations if + * an allocation and copy are required due to a full ring buffer. + * However, the helper will try to avoid doing the allocation + * if possible. Other errors can occur if input parameters are + * invalid either due to *start* byte not being valid part of *msg* + * payload and/or *pop* value being to large. * Return * 0 on success, or a negative error in case of failure. + * + * int bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded pointer movement. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2357,7 +2419,9 @@ union bpf_attr { FN(map_push_elem), \ FN(map_pop_elem), \ FN(map_peek_elem), \ - FN(msg_push_data), + FN(msg_push_data), \ + FN(msg_pop_data), \ + FN(rc_pointer_rel), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2474,6 +2538,8 @@ struct __sk_buff { __u32 data_meta; __bpf_md_ptr(struct bpf_flow_keys *, flow_keys); + __u64 tstamp; + __u32 wire_len; }; struct bpf_tunnel_key { @@ -2599,6 +2665,7 @@ struct sk_msg_md { __u32 local_ip6[4]; /* Stored in network byte order */ __u32 remote_port; /* Stored in network byte order */ __u32 local_port; /* stored in host byte order */ + __u32 size; /* Total size of sk_msg */ }; struct sk_reuseport_md { @@ -2649,6 +2716,18 @@ struct bpf_prog_info { __u32 nr_jited_func_lens; __aligned_u64 jited_ksyms; __aligned_u64 jited_func_lens; + __u32 btf_id; + __u32 func_info_rec_size; + __aligned_u64 func_info; + __u32 nr_func_info; + __u32 nr_line_info; + __aligned_u64 line_info; + __aligned_u64 jited_line_info; + __u32 nr_jited_line_info; + __u32 line_info_rec_size; + __u32 jited_line_info_rec_size; + __u32 nr_prog_tags; + __aligned_u64 prog_tags; } __attribute__((aligned(8))); struct bpf_map_info { @@ -2960,4 +3039,19 @@ struct bpf_flow_keys { }; }; +struct bpf_func_info { + __u32 insn_off; + __u32 type_id; +}; + +#define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) +#define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) + +struct bpf_line_info { + __u32 insn_off; + __u32 file_name_off; + __u32 line_off; + __u32 line_col; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index 972265f32871..7b7475ef2f17 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -34,13 +34,16 @@ struct btf_type { * bits 0-15: vlen (e.g. # of struct's members) * bits 16-23: unused * bits 24-27: kind (e.g. int, ptr, array...etc) - * bits 28-31: unused + * bits 28-30: unused + * bit 31: kind_flag, currently used by + * struct, union and fwd */ __u32 info; /* "size" is used by INT, ENUM, STRUCT and UNION. * "size" tells the size of the type it is describing. * - * "type" is used by PTR, TYPEDEF, VOLATILE, CONST and RESTRICT. + * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, + * FUNC and FUNC_PROTO. * "type" is a type_id referring to another type. */ union { @@ -51,6 +54,7 @@ struct btf_type { #define BTF_INFO_KIND(info) (((info) >> 24) & 0x0f) #define BTF_INFO_VLEN(info) ((info) & 0xffff) +#define BTF_INFO_KFLAG(info) ((info) >> 31) #define BTF_KIND_UNKN 0 /* Unknown */ #define BTF_KIND_INT 1 /* Integer */ @@ -64,8 +68,10 @@ struct btf_type { #define BTF_KIND_VOLATILE 9 /* Volatile */ #define BTF_KIND_CONST 10 /* Const */ #define BTF_KIND_RESTRICT 11 /* Restrict */ -#define BTF_KIND_MAX 11 -#define NR_BTF_KINDS 12 +#define BTF_KIND_FUNC 12 /* Function */ +#define BTF_KIND_FUNC_PROTO 13 /* Function Proto */ +#define BTF_KIND_MAX 13 +#define NR_BTF_KINDS 14 /* For some specific BTF_KIND, "struct btf_type" is immediately * followed by extra data. @@ -107,7 +113,29 @@ struct btf_array { struct btf_member { __u32 name_off; __u32 type; - __u32 offset; /* offset in bits */ + /* If the type info kind_flag is set, the btf_member offset + * contains both member bitfield size and bit offset. The + * bitfield size is set for bitfield members. If the type + * info kind_flag is not set, the offset contains only bit + * offset. + */ + __u32 offset; +}; + +/* If the struct/union type info kind_flag is set, the + * following two macros are used to access bitfield_size + * and bit_offset from btf_member.offset. + */ +#define BTF_MEMBER_BITFIELD_SIZE(val) ((val) >> 24) +#define BTF_MEMBER_BIT_OFFSET(val) ((val) & 0xffffff) + +/* BTF_KIND_FUNC_PROTO is followed by multiple "struct btf_param". + * The exact number of btf_param is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_param { + __u32 name_off; + __u32 type; }; #endif /* _UAPI__LINUX_BTF_H__ */ diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 79407bbd296d..6e52d3660654 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -163,6 +163,11 @@ enum devlink_param_cmode { DEVLINK_PARAM_CMODE_MAX = __DEVLINK_PARAM_CMODE_MAX - 1 }; +enum devlink_param_fw_load_policy_value { + DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER, + DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH, +}; + enum devlink_attr { /* don't change the order or add anything between, this is ABI! */ DEVLINK_ATTR_UNSPEC, diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index c8f8e2455bf3..17be76aeb468 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -882,7 +882,7 @@ struct ethtool_rx_flow_spec { __u32 location; }; -/* How rings are layed out when accessing virtual functions or +/* How rings are laid out when accessing virtual functions or * offloaded queues is device specific. To allow users to do flow * steering and specify these queues the ring cookie is partitioned * into a 32bit queue index with an 8 bit virtual function id. @@ -891,7 +891,7 @@ struct ethtool_rx_flow_spec { * devices start supporting PCIe w/ARI. However at the moment I * do not know of any devices that support this so I do not reserve * space for this at this time. If a future patch consumes the next - * byte it should be aware of this possiblity. + * byte it should be aware of this possibility. */ #define ETHTOOL_RX_FLOW_SPEC_RING 0x00000000FFFFFFFFLL #define ETHTOOL_RX_FLOW_SPEC_RING_VF 0x000000FF00000000LL diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index e41eda3c71f1..773e476a8e54 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -292,4 +292,25 @@ struct br_mcast_stats { __u64 mcast_bytes[BR_MCAST_DIR_SIZE]; __u64 mcast_packets[BR_MCAST_DIR_SIZE]; }; + +/* bridge boolean options + * BR_BOOLOPT_NO_LL_LEARN - disable learning from link-local packets + * + * IMPORTANT: if adding a new option do not forget to handle + * it in br_boolopt_toggle/get and bridge sysfs + */ +enum br_boolopt_id { + BR_BOOLOPT_NO_LL_LEARN, + BR_BOOLOPT_MAX +}; + +/* struct br_boolopt_multi - change multiple bridge boolean options + * + * @optval: new option values (bit per option) + * @optmask: options to change (bit per option) + */ +struct br_boolopt_multi { + __u32 optval; + __u32 optmask; +}; #endif /* _UAPI_LINUX_IF_BRIDGE_H */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 1debfa42cba1..d6533828123a 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -288,6 +288,7 @@ enum { IFLA_BR_MCAST_IGMP_VERSION, IFLA_BR_MCAST_MLD_VERSION, IFLA_BR_VLAN_STATS_PER_PORT, + IFLA_BR_MULTI_BOOLOPT, __IFLA_BR_MAX, }; @@ -533,6 +534,7 @@ enum { IFLA_VXLAN_LABEL, IFLA_VXLAN_GPE, IFLA_VXLAN_TTL_INHERIT, + IFLA_VXLAN_DF, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) @@ -542,6 +544,14 @@ struct ifla_vxlan_port_range { __be16 high; }; +enum ifla_vxlan_df { + VXLAN_DF_UNSET = 0, + VXLAN_DF_SET, + VXLAN_DF_INHERIT, + __VXLAN_DF_END, + VXLAN_DF_MAX = __VXLAN_DF_END - 1, +}; + /* GENEVE section */ enum { IFLA_GENEVE_UNSPEC, @@ -557,10 +567,19 @@ enum { IFLA_GENEVE_UDP_ZERO_CSUM6_RX, IFLA_GENEVE_LABEL, IFLA_GENEVE_TTL_INHERIT, + IFLA_GENEVE_DF, __IFLA_GENEVE_MAX }; #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) +enum ifla_geneve_df { + GENEVE_DF_UNSET = 0, + GENEVE_DF_SET, + GENEVE_DF_INHERIT, + __GENEVE_DF_END, + GENEVE_DF_MAX = __GENEVE_DF_END - 1, +}; + /* PPP section */ enum { IFLA_PPP_UNSPEC, diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index ee432cd3018c..23a6753b37df 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -59,6 +59,7 @@ #define TUNGETVNETBE _IOR('T', 223, int) #define TUNSETSTEERINGEBPF _IOR('T', 224, int) #define TUNSETFILTEREBPF _IOR('T', 225, int) +#define TUNSETCARRIER _IOW('T', 226, int) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 diff --git a/include/uapi/linux/ncsi.h b/include/uapi/linux/ncsi.h index 0a26a5576645..a3f87c54fdb3 100644 --- a/include/uapi/linux/ncsi.h +++ b/include/uapi/linux/ncsi.h @@ -26,6 +26,12 @@ * @NCSI_CMD_SEND_CMD: send NC-SI command to network card. * Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID * and NCSI_ATTR_CHANNEL_ID. + * @NCSI_CMD_SET_PACKAGE_MASK: set a whitelist of allowed packages. + * Requires NCSI_ATTR_IFINDEX and NCSI_ATTR_PACKAGE_MASK. + * @NCSI_CMD_SET_CHANNEL_MASK: set a whitelist of allowed channels. + * Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID, and + * NCSI_ATTR_CHANNEL_MASK. If NCSI_ATTR_CHANNEL_ID is present it sets + * the primary channel. * @NCSI_CMD_MAX: highest command number */ enum ncsi_nl_commands { @@ -34,6 +40,8 @@ enum ncsi_nl_commands { NCSI_CMD_SET_INTERFACE, NCSI_CMD_CLEAR_INTERFACE, NCSI_CMD_SEND_CMD, + NCSI_CMD_SET_PACKAGE_MASK, + NCSI_CMD_SET_CHANNEL_MASK, __NCSI_CMD_AFTER_LAST, NCSI_CMD_MAX = __NCSI_CMD_AFTER_LAST - 1 @@ -48,6 +56,10 @@ enum ncsi_nl_commands { * @NCSI_ATTR_PACKAGE_ID: package ID * @NCSI_ATTR_CHANNEL_ID: channel ID * @NCSI_ATTR_DATA: command payload + * @NCSI_ATTR_MULTI_FLAG: flag to signal that multi-mode should be enabled with + * NCSI_CMD_SET_PACKAGE_MASK or NCSI_CMD_SET_CHANNEL_MASK. + * @NCSI_ATTR_PACKAGE_MASK: 32-bit mask of allowed packages. + * @NCSI_ATTR_CHANNEL_MASK: 32-bit mask of allowed channels. * @NCSI_ATTR_MAX: highest attribute number */ enum ncsi_nl_attrs { @@ -57,6 +69,9 @@ enum ncsi_nl_attrs { NCSI_ATTR_PACKAGE_ID, NCSI_ATTR_CHANNEL_ID, NCSI_ATTR_DATA, + NCSI_ATTR_MULTI_FLAG, + NCSI_ATTR_PACKAGE_MASK, + NCSI_ATTR_CHANNEL_MASK, __NCSI_ATTR_AFTER_LAST, NCSI_ATTR_MAX = __NCSI_ATTR_AFTER_LAST - 1 diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h index 998155444e0d..cd144e3099a3 100644 --- a/include/uapi/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h @@ -28,6 +28,7 @@ enum { NDA_MASTER, NDA_LINK_NETNSID, NDA_SRC_VNI, + NDA_PROTOCOL, /* Originator of entry */ __NDA_MAX }; diff --git a/include/uapi/linux/net_namespace.h b/include/uapi/linux/net_namespace.h index 0187c74d8889..9f9956809565 100644 --- a/include/uapi/linux/net_namespace.h +++ b/include/uapi/linux/net_namespace.h @@ -16,6 +16,8 @@ enum { NETNSA_NSID, NETNSA_PID, NETNSA_FD, + NETNSA_TARGET_NSID, + NETNSA_CURRENT_NSID, __NETNSA_MAX, }; diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h index cca10e767cd8..ca9e63d6e0e4 100644 --- a/include/uapi/linux/netfilter.h +++ b/include/uapi/linux/netfilter.h @@ -34,10 +34,6 @@ /* only for userspace compatibility */ #ifndef __KERNEL__ -/* Generic cache responses from hook functions. - <= 0x2000 is used for protocol-flags. */ -#define NFC_UNKNOWN 0x4000 -#define NFC_ALTERED 0x8000 /* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */ #define NF_VERDICT_BITS 16 diff --git a/include/uapi/linux/netfilter/ipset/ip_set.h b/include/uapi/linux/netfilter/ipset/ip_set.h index 60236f694143..ea69ca21ff23 100644 --- a/include/uapi/linux/netfilter/ipset/ip_set.h +++ b/include/uapi/linux/netfilter/ipset/ip_set.h @@ -13,8 +13,9 @@ #include <linux/types.h> -/* The protocol version */ -#define IPSET_PROTOCOL 6 +/* The protocol versions */ +#define IPSET_PROTOCOL 7 +#define IPSET_PROTOCOL_MIN 6 /* The max length of strings including NUL: set and type identifiers */ #define IPSET_MAXNAMELEN 32 @@ -38,17 +39,19 @@ enum ipset_cmd { IPSET_CMD_TEST, /* 11: Test an element in a set */ IPSET_CMD_HEADER, /* 12: Get set header data only */ IPSET_CMD_TYPE, /* 13: Get set type */ + IPSET_CMD_GET_BYNAME, /* 14: Get set index by name */ + IPSET_CMD_GET_BYINDEX, /* 15: Get set name by index */ IPSET_MSG_MAX, /* Netlink message commands */ /* Commands in userspace: */ - IPSET_CMD_RESTORE = IPSET_MSG_MAX, /* 14: Enter restore mode */ - IPSET_CMD_HELP, /* 15: Get help */ - IPSET_CMD_VERSION, /* 16: Get program version */ - IPSET_CMD_QUIT, /* 17: Quit from interactive mode */ + IPSET_CMD_RESTORE = IPSET_MSG_MAX, /* 16: Enter restore mode */ + IPSET_CMD_HELP, /* 17: Get help */ + IPSET_CMD_VERSION, /* 18: Get program version */ + IPSET_CMD_QUIT, /* 19: Quit from interactive mode */ IPSET_CMD_MAX, - IPSET_CMD_COMMIT = IPSET_CMD_MAX, /* 18: Commit buffered commands */ + IPSET_CMD_COMMIT = IPSET_CMD_MAX, /* 20: Commit buffered commands */ }; /* Attributes at command level */ @@ -66,6 +69,7 @@ enum { IPSET_ATTR_LINENO, /* 9: Restore lineno */ IPSET_ATTR_PROTOCOL_MIN, /* 10: Minimal supported version number */ IPSET_ATTR_REVISION_MIN = IPSET_ATTR_PROTOCOL_MIN, /* type rev min */ + IPSET_ATTR_INDEX, /* 11: Kernel index of set */ __IPSET_ATTR_CMD_MAX, }; #define IPSET_ATTR_CMD_MAX (__IPSET_ATTR_CMD_MAX - 1) @@ -223,6 +227,7 @@ enum ipset_adt { /* Sets are identified by an index in kernel space. Tweak with ip_set_id_t * and IPSET_INVALID_ID if you want to increase the max number of sets. + * Also, IPSET_ATTR_INDEX must be changed. */ typedef __u16 ip_set_id_t; diff --git a/include/uapi/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h index 61f1c7dfd033..3c77f54560f2 100644 --- a/include/uapi/linux/netfilter_decnet.h +++ b/include/uapi/linux/netfilter_decnet.h @@ -15,16 +15,6 @@ #include <limits.h> /* for INT_MIN, INT_MAX */ -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_DN_SRC 0x0001 -/* Dest IP address. */ -#define NFC_DN_DST 0x0002 -/* Input device. */ -#define NFC_DN_IF_IN 0x0004 -/* Output device. */ -#define NFC_DN_IF_OUT 0x0008 - /* kernel define is in netfilter_defs.h */ #define NF_DN_NUMHOOKS 7 #endif /* ! __KERNEL__ */ diff --git a/include/uapi/linux/netfilter_ipv4.h b/include/uapi/linux/netfilter_ipv4.h index c3b060775e13..155e77d6a42d 100644 --- a/include/uapi/linux/netfilter_ipv4.h +++ b/include/uapi/linux/netfilter_ipv4.h @@ -13,34 +13,6 @@ #include <limits.h> /* for INT_MIN, INT_MAX */ -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_IP_SRC 0x0001 -/* Dest IP address. */ -#define NFC_IP_DST 0x0002 -/* Input device. */ -#define NFC_IP_IF_IN 0x0004 -/* Output device. */ -#define NFC_IP_IF_OUT 0x0008 -/* TOS. */ -#define NFC_IP_TOS 0x0010 -/* Protocol. */ -#define NFC_IP_PROTO 0x0020 -/* IP options. */ -#define NFC_IP_OPTIONS 0x0040 -/* Frag & flags. */ -#define NFC_IP_FRAG 0x0080 - -/* Per-protocol information: only matters if proto match. */ -/* TCP flags. */ -#define NFC_IP_TCPFLAGS 0x0100 -/* Source port. */ -#define NFC_IP_SRC_PT 0x0200 -/* Dest port. */ -#define NFC_IP_DST_PT 0x0400 -/* Something else about the proto */ -#define NFC_IP_PROTO_UNKNOWN 0x2000 - /* IP Hooks */ /* After promisc drops, checksum checks. */ #define NF_IP_PRE_ROUTING 0 diff --git a/include/uapi/linux/netfilter_ipv6.h b/include/uapi/linux/netfilter_ipv6.h index dc624fd24d25..80aa9b0799af 100644 --- a/include/uapi/linux/netfilter_ipv6.h +++ b/include/uapi/linux/netfilter_ipv6.h @@ -16,35 +16,6 @@ #include <limits.h> /* for INT_MIN, INT_MAX */ -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_IP6_SRC 0x0001 -/* Dest IP address. */ -#define NFC_IP6_DST 0x0002 -/* Input device. */ -#define NFC_IP6_IF_IN 0x0004 -/* Output device. */ -#define NFC_IP6_IF_OUT 0x0008 -/* TOS. */ -#define NFC_IP6_TOS 0x0010 -/* Protocol. */ -#define NFC_IP6_PROTO 0x0020 -/* IP options. */ -#define NFC_IP6_OPTIONS 0x0040 -/* Frag & flags. */ -#define NFC_IP6_FRAG 0x0080 - - -/* Per-protocol information: only matters if proto match. */ -/* TCP flags. */ -#define NFC_IP6_TCPFLAGS 0x0100 -/* Source port. */ -#define NFC_IP6_SRC_PT 0x0200 -/* Dest port. */ -#define NFC_IP6_DST_PT 0x0400 -/* Something else about the proto */ -#define NFC_IP6_PROTO_UNKNOWN 0x2000 - /* IP6 Hooks */ /* After promisc drops, checksum checks. */ #define NF_IP6_PRE_ROUTING 0 diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6d610bae30a9..31ae5c7f10e3 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1036,6 +1036,35 @@ * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. * + * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) + * with the given parameters, which are encapsulated in the nested + * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address + * randomization may be enabled and configured by specifying the + * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. + * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. + * A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in + * the netlink extended ack message. + * + * To cancel a measurement, close the socket that requested it. + * + * Measurement results are reported to the socket that requested the + * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they + * become available, so applications must ensure a large enough socket + * buffer size. + * + * Depending on driver support it may or may not be possible to start + * multiple concurrent measurements. + * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the + * result notification from the driver to the requesting socket. + * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that + * the measurement completed, using the measurement cookie + * (%NL80211_ATTR_COOKIE). + * + * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was + * detected and reported by a neighboring device on the channel + * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes + * determining the width and type. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1250,6 +1279,12 @@ enum nl80211_commands { NL80211_CMD_GET_FTM_RESPONDER_STATS, + NL80211_CMD_PEER_MEASUREMENT_START, + NL80211_CMD_PEER_MEASUREMENT_RESULT, + NL80211_CMD_PEER_MEASUREMENT_COMPLETE, + + NL80211_CMD_NOTIFY_RADAR, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1706,7 +1741,7 @@ enum nl80211_commands { * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID * is included in the probe request, but the match attributes * will never let it go through), -EINVAL may be returned. - * If ommited, no filtering is done. + * If omitted, no filtering is done. * * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes @@ -1811,7 +1846,7 @@ enum nl80211_commands { * * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be * used by the drivers which has MLME in firmware and does not have support - * to report per station tx/rx activity to free up the staion entry from + * to report per station tx/rx activity to free up the station entry from * the list. This needs to be used when the driver advertises the * capability to timeout the stations. * @@ -2172,7 +2207,7 @@ enum nl80211_commands { * * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in * the specified band is to be adjusted before doing - * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out + * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out * better BSSs. The attribute value is a packed structure * value as specified by &struct nl80211_bss_select_rssi_adjust. * @@ -2254,6 +2289,16 @@ enum nl80211_commands { * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder * statistics, see &enum nl80211_ftm_responder_stats. * + * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), + * if the attribute is not given no timeout is requested. Note that 0 is an + * invalid value. + * + * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) + * data, uses nested attributes specified in + * &enum nl80211_peer_measurement_attrs. + * This is also used for capability advertisement in the wiphy information, + * with the appropriate sub-attributes. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2699,6 +2744,10 @@ enum nl80211_attrs { NL80211_ATTR_FTM_RESPONDER_STATS, + NL80211_ATTR_TIMEOUT, + + NL80211_ATTR_PEER_MEASUREMENTS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3074,6 +3123,8 @@ enum nl80211_sta_bss_param { * with an FCS error (u32, from this station). This count may not include * some packets with an FCS error due to TA corruption. Hence this counter * might not be fully accurate. + * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a + * mesh gate (u8, 0 or 1) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3116,6 +3167,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_ACK_SIGNAL_AVG, NL80211_STA_INFO_RX_MPDUS, NL80211_STA_INFO_FCS_ERROR_COUNT, + NL80211_STA_INFO_CONNECTED_TO_GATE, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -3895,6 +3947,11 @@ enum nl80211_mesh_power_mode { * remove it from the STA's list of peers. You may set this to 0 to disable * the removal of the STA. Default is 30 minutes. * + * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA + * will advertise that it is connected to a gate in the mesh formation + * field. If left unset then the mesh formation field will only + * advertise such if there is an active root mesh path. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -3927,6 +3984,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_POWER_MODE, NL80211_MESHCONF_AWAKE_WINDOW, NL80211_MESHCONF_PLINK_TIMEOUT, + NL80211_MESHCONF_CONNECTED_TO_GATE, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -4859,7 +4917,7 @@ enum nl80211_iface_limit_attrs { * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 * => allows a STA plus three P2P interfaces * - * The list of these four possiblities could completely be contained + * The list of these four possibilities could completely be contained * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate * that any of these groups must match. * @@ -4889,7 +4947,7 @@ enum nl80211_if_combination_attrs { * enum nl80211_plink_state - state of a mesh peer link finite state machine * * @NL80211_PLINK_LISTEN: initial state, considered the implicit - * state of non existant mesh peer links + * state of non existent mesh peer links * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to * this mesh peer * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received @@ -5381,7 +5439,7 @@ enum nl80211_timeout_reason { * request parameters IE in the probe request * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at - * rate of at least 5.5M. In case non OCE AP is dicovered in the channel, + * rate of at least 5.5M. In case non OCE AP is discovered in the channel, * only the first probe req in the channel will be sent in high rate. * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request * tx deferral (dot11FILSProbeDelay shall be set to 15ms) @@ -5842,9 +5900,11 @@ enum nl80211_external_auth_action { * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element - * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10) + * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), + * i.e. starting with the measurement token * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element - * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13) + * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), + * i.e. starting with the measurement token * @__NL80211_FTM_RESP_ATTR_LAST: Internal * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. */ @@ -5906,4 +5966,386 @@ enum nl80211_ftm_responder_stats { NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 }; +/** + * enum nl80211_preamble - frame preamble types + * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble + * @NL80211_PREAMBLE_HT: HT preamble + * @NL80211_PREAMBLE_VHT: VHT preamble + * @NL80211_PREAMBLE_DMG: DMG preamble + */ +enum nl80211_preamble { + NL80211_PREAMBLE_LEGACY, + NL80211_PREAMBLE_HT, + NL80211_PREAMBLE_VHT, + NL80211_PREAMBLE_DMG, +}; + +/** + * enum nl80211_peer_measurement_type - peer measurement types + * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use + * these numbers also for attributes + * + * @NL80211_PMSR_TYPE_FTM: flight time measurement + * + * @NUM_NL80211_PMSR_TYPES: internal + * @NL80211_PMSR_TYPE_MAX: highest type number + */ +enum nl80211_peer_measurement_type { + NL80211_PMSR_TYPE_INVALID, + + NL80211_PMSR_TYPE_FTM, + + NUM_NL80211_PMSR_TYPES, + NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 +}; + +/** + * enum nl80211_peer_measurement_status - peer measurement status + * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully + * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused + * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out + * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent + * reason may be available in the response data + */ +enum nl80211_peer_measurement_status { + NL80211_PMSR_STATUS_SUCCESS, + NL80211_PMSR_STATUS_REFUSED, + NL80211_PMSR_STATUS_TIMEOUT, + NL80211_PMSR_STATUS_FAILURE, +}; + +/** + * enum nl80211_peer_measurement_req - peer measurement request attributes + * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement + * type-specific request data inside. The attributes used are from the + * enums named nl80211_peer_measurement_<type>_req. + * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported + * (flag attribute) + * + * @NUM_NL80211_PMSR_REQ_ATTRS: internal + * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_req { + __NL80211_PMSR_REQ_ATTR_INVALID, + + NL80211_PMSR_REQ_ATTR_DATA, + NL80211_PMSR_REQ_ATTR_GET_AP_TSF, + + /* keep last */ + NUM_NL80211_PMSR_REQ_ATTRS, + NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_resp - peer measurement response attributes + * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement + * type-specific results inside. The attributes used are from the enums + * named nl80211_peer_measurement_<type>_resp. + * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status + * (using values from &enum nl80211_peer_measurement_status.) + * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the + * result was measured; this value is not expected to be accurate to + * more than 20ms. (u64, nanoseconds) + * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface + * doing the measurement is connected to when the result was measured. + * This shall be accurately reported if supported and requested + * (u64, usec) + * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially + * (*e.g. with FTM per-burst data) this flag will be cleared on all but + * the last result; if all results are combined it's set on the single + * result. + * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore + * + * @NUM_NL80211_PMSR_RESP_ATTRS: internal + * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_resp { + __NL80211_PMSR_RESP_ATTR_INVALID, + + NL80211_PMSR_RESP_ATTR_DATA, + NL80211_PMSR_RESP_ATTR_STATUS, + NL80211_PMSR_RESP_ATTR_HOST_TIME, + NL80211_PMSR_RESP_ATTR_AP_TSF, + NL80211_PMSR_RESP_ATTR_FINAL, + NL80211_PMSR_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_RESP_ATTRS, + NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement + * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid + * + * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address + * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level + * attributes like %NL80211_ATTR_WIPHY_FREQ etc. + * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_req inside. + * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_resp inside. + * + * @NUM_NL80211_PMSR_PEER_ATTRS: internal + * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_peer_attrs { + __NL80211_PMSR_PEER_ATTR_INVALID, + + NL80211_PMSR_PEER_ATTR_ADDR, + NL80211_PMSR_PEER_ATTR_CHAN, + NL80211_PMSR_PEER_ATTR_REQ, + NL80211_PMSR_PEER_ATTR_RESP, + + /* keep last */ + NUM_NL80211_PMSR_PEER_ATTRS, + NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, +}; + +/** + * enum nl80211_peer_measurement_attrs - peer measurement attributes + * @__NL80211_PMSR_ATTR_INVALID: invalid + * + * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability + * advertisement only, indicates the maximum number of peers + * measurements can be done with in a single request + * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability + * indicating that the connected AP's TSF can be reported in + * measurement results + * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability + * indicating that MAC address randomization is supported. + * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, + * this contains a nesting indexed by measurement type, and + * type-specific capabilities inside, which are from the enums + * named nl80211_peer_measurement_<type>_capa. + * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is + * meaningless, just a list of peers to measure with, with the + * sub-attributes taken from + * &enum nl80211_peer_measurement_peer_attrs. + * + * @NUM_NL80211_PMSR_ATTR: internal + * @NL80211_PMSR_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_attrs { + __NL80211_PMSR_ATTR_INVALID, + + NL80211_PMSR_ATTR_MAX_PEERS, + NL80211_PMSR_ATTR_REPORT_AP_TSF, + NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, + NL80211_PMSR_ATTR_TYPE_CAPA, + NL80211_PMSR_ATTR_PEERS, + + /* keep last */ + NUM_NL80211_PMSR_ATTR, + NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_capa - FTM capabilities + * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode + * is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP + * mode is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI + * data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic + * location data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits + * from &enum nl80211_preamble. + * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from + * &enum nl80211_chan_width indicating the supported channel + * bandwidths for FTM. Note that a higher channel bandwidth may be + * configured to allow for other measurements types with different + * bandwidth requirement in the same measurement. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating + * the maximum bursts exponent that can be used (if not present anything + * is valid) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating + * the maximum FTMs per burst (if not present anything is valid) + * + * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_capa { + __NL80211_PMSR_FTM_CAPA_ATTR_INVALID, + + NL80211_PMSR_FTM_CAPA_ATTR_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, + NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, + NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, + + /* keep last */ + NUM_NL80211_PMSR_FTM_CAPA_ATTR, + NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_req - FTM request attributes + * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see + * &enum nl80211_preamble), optional for DMG (u32) + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in + * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" + * (u8, 0-15, optional with default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units + * of 100ms (u16, optional with default 0) + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 + * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with + * default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames + * requested per burst + * (u8, 0-31, optional with default 0 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries + * (u8, default 3) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data + * (flag) + * + * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal + * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_req { + __NL80211_PMSR_FTM_REQ_ATTR_INVALID, + + NL80211_PMSR_FTM_REQ_ATTR_ASAP, + NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, + NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, + NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_ATTR, + NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons + * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used + * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder + * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement + * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is + * on a different channel, so can't measure (if we didn't know, we'd + * try and get no response) + * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM + * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps + * received + * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry + * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) + * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed + * by the peer and are no longer supported + */ +enum nl80211_peer_measurement_ftm_failure_reasons { + NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, + NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, + NL80211_PMSR_FTM_FAILURE_REJECTED, + NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, + NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, + NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, + NL80211_PMSR_FTM_FAILURE_PEER_BUSY, + NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, +}; + +/** + * enum nl80211_peer_measurement_ftm_resp - FTM response attributes + * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported + * as separate results then it will be the burst index 0...(N-1) and + * the top level will indicate partial results (u32) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames + * transmitted (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames + * that were acknowleged (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the + * busy peer (u32, seconds) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent + * used by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by + * the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used + * by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the + * FTM action frame (optional, nested, using &enum nl80211_rate_info + * attributes) + * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM + * action frame (optional, nested, using &enum nl80211_rate_info attrs) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that + * standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, + * optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note + * that standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 8. + * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer + * (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 11. + * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only + * + * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal + * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_resp { + __NL80211_PMSR_FTM_RESP_ATTR_INVALID, + + NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, + NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, + NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, + NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, + NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_LCI, + NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, + NL80211_PMSR_FTM_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_RESP_ATTR, + NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 401d0c1e612d..95d0db2a8350 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -485,6 +485,11 @@ enum { TCA_FLOWER_IN_HW_COUNT, + TCA_FLOWER_KEY_PORT_SRC_MIN, /* be16 */ + TCA_FLOWER_KEY_PORT_SRC_MAX, /* be16 */ + TCA_FLOWER_KEY_PORT_DST_MIN, /* be16 */ + TCA_FLOWER_KEY_PORT_DST_MAX, /* be16 */ + __TCA_FLOWER_MAX, }; @@ -518,6 +523,8 @@ enum { TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), }; +#define TCA_FLOWER_MASK_FLAGS_RANGE (1 << 0) /* Range-based match */ + /* Match-all classifier */ enum { diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 89ee47c2f17d..0d18b1d1fbbc 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -291,11 +291,38 @@ enum { TCA_GRED_DPS, TCA_GRED_MAX_P, TCA_GRED_LIMIT, + TCA_GRED_VQ_LIST, /* nested TCA_GRED_VQ_ENTRY */ __TCA_GRED_MAX, }; #define TCA_GRED_MAX (__TCA_GRED_MAX - 1) +enum { + TCA_GRED_VQ_ENTRY_UNSPEC, + TCA_GRED_VQ_ENTRY, /* nested TCA_GRED_VQ_* */ + __TCA_GRED_VQ_ENTRY_MAX, +}; +#define TCA_GRED_VQ_ENTRY_MAX (__TCA_GRED_VQ_ENTRY_MAX - 1) + +enum { + TCA_GRED_VQ_UNSPEC, + TCA_GRED_VQ_PAD, + TCA_GRED_VQ_DP, /* u32 */ + TCA_GRED_VQ_STAT_BYTES, /* u64 */ + TCA_GRED_VQ_STAT_PACKETS, /* u32 */ + TCA_GRED_VQ_STAT_BACKLOG, /* u32 */ + TCA_GRED_VQ_STAT_PROB_DROP, /* u32 */ + TCA_GRED_VQ_STAT_PROB_MARK, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_DROP, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_MARK, /* u32 */ + TCA_GRED_VQ_STAT_PDROP, /* u32 */ + TCA_GRED_VQ_STAT_OTHER, /* u32 */ + TCA_GRED_VQ_FLAGS, /* u32 */ + __TCA_GRED_VQ_MAX +}; + +#define TCA_GRED_VQ_MAX (__TCA_GRED_VQ_MAX - 1) + struct tc_gred_qopt { __u32 limit; /* HARD maximal queue length (bytes) */ __u32 qth_min; /* Min average length threshold (bytes) */ @@ -864,6 +891,8 @@ enum { TCA_FQ_LOW_RATE_THRESHOLD, /* per packet delay under this rate */ + TCA_FQ_CE_THRESHOLD, /* DCTCP-like CE-marking threshold */ + __TCA_FQ_MAX }; @@ -882,6 +911,7 @@ struct tc_fq_qd_stats { __u32 inactive_flows; __u32 throttled_flows; __u32 unthrottle_latency_ns; + __u64 ce_mark; /* packets above ce_threshold */ }; /* Heavy-Hitter Filter */ diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index 3039bf6a742e..d73d83950265 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -84,6 +84,16 @@ struct ptp_sys_offset { struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1]; }; +struct ptp_sys_offset_extended { + unsigned int n_samples; /* Desired number of measurements. */ + unsigned int rsv[3]; /* Reserved for future use. */ + /* + * Array of [system, phc, system] time stamps. The kernel will provide + * 3*n_samples time stamps. + */ + struct ptp_clock_time ts[PTP_MAX_SAMPLES][3]; +}; + struct ptp_sys_offset_precise { struct ptp_clock_time device; struct ptp_clock_time sys_realtime; @@ -136,6 +146,8 @@ struct ptp_pin_desc { #define PTP_PIN_SETFUNC _IOW(PTP_CLK_MAGIC, 7, struct ptp_pin_desc) #define PTP_SYS_OFFSET_PRECISE \ _IOWR(PTP_CLK_MAGIC, 8, struct ptp_sys_offset_precise) +#define PTP_SYS_OFFSET_EXTENDED \ + _IOW(PTP_CLK_MAGIC, 9, struct ptp_sys_offset_extended) struct ptp_extts_event { struct ptp_clock_time t; /* Time event occured. */ diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h index c81feb373d3e..d584073532b8 100644 --- a/include/uapi/linux/sctp.h +++ b/include/uapi/linux/sctp.h @@ -129,6 +129,7 @@ typedef __s32 sctp_assoc_t; #define SCTP_STREAM_SCHEDULER_VALUE 124 #define SCTP_INTERLEAVING_SUPPORTED 125 #define SCTP_SENDMSG_CONNECT 126 +#define SCTP_EVENT 127 /* PR-SCTP policies */ #define SCTP_PR_SCTP_NONE 0x0000 @@ -632,7 +633,9 @@ union sctp_notification { */ enum sctp_sn_type { - SCTP_SN_TYPE_BASE = (1<<15), + SCTP_SN_TYPE_BASE = (1<<15), + SCTP_DATA_IO_EVENT = SCTP_SN_TYPE_BASE, +#define SCTP_DATA_IO_EVENT SCTP_DATA_IO_EVENT SCTP_ASSOC_CHANGE, #define SCTP_ASSOC_CHANGE SCTP_ASSOC_CHANGE SCTP_PEER_ADDR_CHANGE, @@ -657,6 +660,8 @@ enum sctp_sn_type { #define SCTP_ASSOC_RESET_EVENT SCTP_ASSOC_RESET_EVENT SCTP_STREAM_CHANGE_EVENT, #define SCTP_STREAM_CHANGE_EVENT SCTP_STREAM_CHANGE_EVENT + SCTP_SN_TYPE_MAX = SCTP_STREAM_CHANGE_EVENT, +#define SCTP_SN_TYPE_MAX SCTP_SN_TYPE_MAX }; /* Notification error codes used to fill up the error fields in some @@ -1150,6 +1155,12 @@ struct sctp_add_streams { uint16_t sas_outstrms; }; +struct sctp_event { + sctp_assoc_t se_assoc_id; + uint16_t se_type; + uint8_t se_on; +}; + /* SCTP Stream schedulers */ enum sctp_sched_type { SCTP_SS_FCFS, diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index f80135e5feaa..86dc24a96c90 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -243,6 +243,7 @@ enum LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ + LINUX_MIB_TCPBACKLOGCOALESCE, /* TCPBacklogCoalesce */ LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */ LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index e02d31986ff9..8bb6cc5f3235 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -266,6 +266,7 @@ enum { TCP_NLA_BYTES_RETRANS, /* Data bytes retransmitted */ TCP_NLA_DSACK_DUPS, /* DSACK blocks received */ TCP_NLA_REORD_SEEN, /* reordering events seen */ + TCP_NLA_SRTT, /* smoothed RTT in usecs */ }; /* for TCP_MD5SIG socket option */ diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h index 09502de447f5..30baccb6c9c4 100644 --- a/include/uapi/linux/udp.h +++ b/include/uapi/linux/udp.h @@ -33,6 +33,7 @@ struct udphdr { #define UDP_NO_CHECK6_TX 101 /* Disable sending checksum for UDP6X */ #define UDP_NO_CHECK6_RX 102 /* Disable accpeting checksum for UDP6 */ #define UDP_SEGMENT 103 /* Set GSO segmentation size */ +#define UDP_GRO 104 /* This socket can receive UDP GRO packets */ /* UDP encapsulation types */ #define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h index 449132c76b1c..1196e1c1d4f6 100644 --- a/include/uapi/linux/virtio_config.h +++ b/include/uapi/linux/virtio_config.h @@ -75,6 +75,9 @@ */ #define VIRTIO_F_IOMMU_PLATFORM 33 +/* This feature indicates support for the packed virtqueue layout. */ +#define VIRTIO_F_RING_PACKED 34 + /* * Does the device support Single Root I/O Virtualization? */ diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h index 6d5d5faa989b..2414f8af26b3 100644 --- a/include/uapi/linux/virtio_ring.h +++ b/include/uapi/linux/virtio_ring.h @@ -44,6 +44,13 @@ /* This means the buffer contains a list of buffer descriptors. */ #define VRING_DESC_F_INDIRECT 4 +/* + * Mark a descriptor as available or used in packed ring. + * Notice: they are defined as shifts instead of shifted values. + */ +#define VRING_PACKED_DESC_F_AVAIL 7 +#define VRING_PACKED_DESC_F_USED 15 + /* The Host uses this in used->flags to advise the Guest: don't kick me when * you add a buffer. It's unreliable, so it's simply an optimization. Guest * will still kick if it's out of buffers. */ @@ -53,6 +60,23 @@ * optimization. */ #define VRING_AVAIL_F_NO_INTERRUPT 1 +/* Enable events in packed ring. */ +#define VRING_PACKED_EVENT_FLAG_ENABLE 0x0 +/* Disable events in packed ring. */ +#define VRING_PACKED_EVENT_FLAG_DISABLE 0x1 +/* + * Enable events for a specific descriptor in packed ring. + * (as specified by Descriptor Ring Change Event Offset/Wrap Counter). + * Only valid if VIRTIO_RING_F_EVENT_IDX has been negotiated. + */ +#define VRING_PACKED_EVENT_FLAG_DESC 0x2 + +/* + * Wrap counter bit shift in event suppression structure + * of packed ring. + */ +#define VRING_PACKED_EVENT_F_WRAP_CTR 15 + /* We support indirect buffer descriptors */ #define VIRTIO_RING_F_INDIRECT_DESC 28 @@ -171,4 +195,32 @@ static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old) return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old); } +struct vring_packed_desc_event { + /* Descriptor Ring Change Event Offset/Wrap Counter. */ + __le16 off_wrap; + /* Descriptor Ring Change Event Flags. */ + __le16 flags; +}; + +struct vring_packed_desc { + /* Buffer Address. */ + __le64 addr; + /* Buffer Length. */ + __le32 len; + /* Buffer ID. */ + __le16 id; + /* The flags depending on descriptor type. */ + __le16 flags; +}; + +struct vring_packed { + unsigned int num; + + struct vring_packed_desc *desc; + + struct vring_packed_desc_event *driver; + + struct vring_packed_desc_event *device; +}; + #endif /* _UAPI_LINUX_VIRTIO_RING_H */ |