diff options
Diffstat (limited to 'include/uapi')
| -rw-r--r-- | include/uapi/linux/virtio_balloon.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/virtio_blk.h | 17 | ||||
| -rw-r--r-- | include/uapi/linux/virtio_config.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/virtio_net.h | 42 | ||||
| -rw-r--r-- | include/uapi/linux/virtio_pci.h | 93 |
5 files changed, 141 insertions, 16 deletions
diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h index be40f7059e93..4b0488f20b2e 100644 --- a/include/uapi/linux/virtio_balloon.h +++ b/include/uapi/linux/virtio_balloon.h @@ -36,8 +36,7 @@ /* Size of a PFN in the balloon interface. */ #define VIRTIO_BALLOON_PFN_SHIFT 12 -struct virtio_balloon_config -{ +struct virtio_balloon_config { /* Number of pages host wants Guest to give up. */ __le32 num_pages; /* Number of pages we've actually got in balloon. */ diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h index 247c8ba8544a..3c53eec4ae22 100644 --- a/include/uapi/linux/virtio_blk.h +++ b/include/uapi/linux/virtio_blk.h @@ -31,22 +31,25 @@ #include <linux/virtio_types.h> /* Feature bits */ -#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ #define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ #define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ #define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ -#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ -#define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */ #define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ -#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ +/* Legacy feature bits */ +#ifndef VIRTIO_BLK_NO_LEGACY +#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ +#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ +#define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */ +#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ #ifndef __KERNEL__ /* Old (deprecated) name for VIRTIO_BLK_F_WCE. */ #define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE #endif +#endif /* !VIRTIO_BLK_NO_LEGACY */ #define VIRTIO_BLK_ID_BYTES 20 /* ID string length */ @@ -100,8 +103,10 @@ struct virtio_blk_config { #define VIRTIO_BLK_T_IN 0 #define VIRTIO_BLK_T_OUT 1 +#ifndef VIRTIO_BLK_NO_LEGACY /* This bit says it's a scsi command, not an actual read or write. */ #define VIRTIO_BLK_T_SCSI_CMD 2 +#endif /* VIRTIO_BLK_NO_LEGACY */ /* Cache flush command */ #define VIRTIO_BLK_T_FLUSH 4 @@ -109,8 +114,10 @@ struct virtio_blk_config { /* Get device ID command */ #define VIRTIO_BLK_T_GET_ID 8 +#ifndef VIRTIO_BLK_NO_LEGACY /* Barrier before this op. */ #define VIRTIO_BLK_T_BARRIER 0x80000000 +#endif /* !VIRTIO_BLK_NO_LEGACY */ /* This is the first element of the read scatter-gather list. */ struct virtio_blk_outhdr { @@ -122,12 +129,14 @@ struct virtio_blk_outhdr { __virtio64 sector; }; +#ifndef VIRTIO_BLK_NO_LEGACY struct virtio_scsi_inhdr { __virtio32 errors; __virtio32 data_len; __virtio32 sense_len; __virtio32 residual; }; +#endif /* !VIRTIO_BLK_NO_LEGACY */ /* And this is the final byte of the write scatter-gather list. */ #define VIRTIO_BLK_S_OK 0 diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h index a6d0cdeaacd4..c18264df9504 100644 --- a/include/uapi/linux/virtio_config.h +++ b/include/uapi/linux/virtio_config.h @@ -49,12 +49,14 @@ #define VIRTIO_TRANSPORT_F_START 28 #define VIRTIO_TRANSPORT_F_END 33 +#ifndef VIRTIO_CONFIG_NO_LEGACY /* Do we get callbacks when the ring is completely used, even if we've * suppressed them? */ #define VIRTIO_F_NOTIFY_ON_EMPTY 24 /* Can the device handle any descriptor layout? */ #define VIRTIO_F_ANY_LAYOUT 27 +#endif /* VIRTIO_CONFIG_NO_LEGACY */ /* v1.0 compliant. */ #define VIRTIO_F_VERSION_1 32 diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index b5f1677b291c..7bbee79ca293 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -35,7 +35,6 @@ #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ -#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ @@ -56,6 +55,10 @@ * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ +#ifndef VIRTIO_NET_NO_LEGACY +#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ +#endif /* VIRTIO_NET_NO_LEGACY */ + #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ @@ -71,19 +74,39 @@ struct virtio_net_config { __u16 max_virtqueue_pairs; } __attribute__((packed)); +/* + * This header comes first in the scatter-gather list. If you don't + * specify GSO or CSUM features, you can simply ignore the header. + * + * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf, + * only flattened. + */ +struct virtio_net_hdr_v1 { +#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */ +#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */ + __u8 flags; +#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */ +#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ +#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ +#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ +#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ + __u8 gso_type; + __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ + __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ + __virtio16 csum_start; /* Position to start checksumming from */ + __virtio16 csum_offset; /* Offset after that to place checksum */ + __virtio16 num_buffers; /* Number of merged rx buffers */ +}; + +#ifndef VIRTIO_NET_NO_LEGACY /* This header comes first in the scatter-gather list. - * If VIRTIO_F_ANY_LAYOUT is not negotiated, it must + * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must * be the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ struct virtio_net_hdr { -#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset -#define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid + /* See VIRTIO_NET_HDR_F_* */ __u8 flags; -#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame -#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO) -#define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO) -#define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP -#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set + /* See VIRTIO_NET_HDR_GSO_* */ __u8 gso_type; __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ @@ -97,6 +120,7 @@ struct virtio_net_hdr_mrg_rxbuf { struct virtio_net_hdr hdr; __virtio16 num_buffers; /* Number of merged rx buffers */ }; +#endif /* ...VIRTIO_NET_NO_LEGACY */ /* * Control virtqueue data structures diff --git a/include/uapi/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h index 35b552c7f330..75301468359f 100644 --- a/include/uapi/linux/virtio_pci.h +++ b/include/uapi/linux/virtio_pci.h @@ -39,7 +39,7 @@ #ifndef _LINUX_VIRTIO_PCI_H #define _LINUX_VIRTIO_PCI_H -#include <linux/virtio_config.h> +#include <linux/types.h> #ifndef VIRTIO_PCI_NO_LEGACY @@ -99,4 +99,95 @@ /* Vector value used to disable MSI for queue */ #define VIRTIO_MSI_NO_VECTOR 0xffff +#ifndef VIRTIO_PCI_NO_MODERN + +/* IDs for different capabilities. Must all exist. */ + +/* Common configuration */ +#define VIRTIO_PCI_CAP_COMMON_CFG 1 +/* Notifications */ +#define VIRTIO_PCI_CAP_NOTIFY_CFG 2 +/* ISR access */ +#define VIRTIO_PCI_CAP_ISR_CFG 3 +/* Device specific configuration */ +#define VIRTIO_PCI_CAP_DEVICE_CFG 4 +/* PCI configuration access */ +#define VIRTIO_PCI_CAP_PCI_CFG 5 + +/* This is the PCI capability header: */ +struct virtio_pci_cap { + __u8 cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */ + __u8 cap_next; /* Generic PCI field: next ptr. */ + __u8 cap_len; /* Generic PCI field: capability length */ + __u8 cfg_type; /* Identifies the structure. */ + __u8 bar; /* Where to find it. */ + __u8 padding[3]; /* Pad to full dword. */ + __le32 offset; /* Offset within bar. */ + __le32 length; /* Length of the structure, in bytes. */ +}; + +struct virtio_pci_notify_cap { + struct virtio_pci_cap cap; + __le32 notify_off_multiplier; /* Multiplier for queue_notify_off. */ +}; + +/* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */ +struct virtio_pci_common_cfg { + /* About the whole device. */ + __le32 device_feature_select; /* read-write */ + __le32 device_feature; /* read-only */ + __le32 guest_feature_select; /* read-write */ + __le32 guest_feature; /* read-write */ + __le16 msix_config; /* read-write */ + __le16 num_queues; /* read-only */ + __u8 device_status; /* read-write */ + __u8 config_generation; /* read-only */ + + /* About a specific virtqueue. */ + __le16 queue_select; /* read-write */ + __le16 queue_size; /* read-write, power of 2. */ + __le16 queue_msix_vector; /* read-write */ + __le16 queue_enable; /* read-write */ + __le16 queue_notify_off; /* read-only */ + __le32 queue_desc_lo; /* read-write */ + __le32 queue_desc_hi; /* read-write */ + __le32 queue_avail_lo; /* read-write */ + __le32 queue_avail_hi; /* read-write */ + __le32 queue_used_lo; /* read-write */ + __le32 queue_used_hi; /* read-write */ +}; + +/* Macro versions of offsets for the Old Timers! */ +#define VIRTIO_PCI_CAP_VNDR 0 +#define VIRTIO_PCI_CAP_NEXT 1 +#define VIRTIO_PCI_CAP_LEN 2 +#define VIRTIO_PCI_CAP_CFG_TYPE 3 +#define VIRTIO_PCI_CAP_BAR 4 +#define VIRTIO_PCI_CAP_OFFSET 8 +#define VIRTIO_PCI_CAP_LENGTH 12 + +#define VIRTIO_PCI_NOTIFY_CAP_MULT 16 + +#define VIRTIO_PCI_COMMON_DFSELECT 0 +#define VIRTIO_PCI_COMMON_DF 4 +#define VIRTIO_PCI_COMMON_GFSELECT 8 +#define VIRTIO_PCI_COMMON_GF 12 +#define VIRTIO_PCI_COMMON_MSIX 16 +#define VIRTIO_PCI_COMMON_NUMQ 18 +#define VIRTIO_PCI_COMMON_STATUS 20 +#define VIRTIO_PCI_COMMON_CFGGENERATION 21 +#define VIRTIO_PCI_COMMON_Q_SELECT 22 +#define VIRTIO_PCI_COMMON_Q_SIZE 24 +#define VIRTIO_PCI_COMMON_Q_MSIX 26 +#define VIRTIO_PCI_COMMON_Q_ENABLE 28 +#define VIRTIO_PCI_COMMON_Q_NOFF 30 +#define VIRTIO_PCI_COMMON_Q_DESCLO 32 +#define VIRTIO_PCI_COMMON_Q_DESCHI 36 +#define VIRTIO_PCI_COMMON_Q_AVAILLO 40 +#define VIRTIO_PCI_COMMON_Q_AVAILHI 44 +#define VIRTIO_PCI_COMMON_Q_USEDLO 48 +#define VIRTIO_PCI_COMMON_Q_USEDHI 52 + +#endif /* VIRTIO_PCI_NO_MODERN */ + #endif |