diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/can/bittiming.h | 64 | ||||
| -rw-r--r-- | include/linux/can/dev.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/can/netlink.h | 2 |
3 files changed, 53 insertions, 17 deletions
diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h index 9de6e9053e34..9e20260611cc 100644 --- a/include/linux/can/bittiming.h +++ b/include/linux/can/bittiming.h @@ -19,6 +19,9 @@ /* Megahertz */ #define CAN_MHZ 1000000UL +#define CAN_CTRLMODE_TDC_MASK \ + (CAN_CTRLMODE_TDC_AUTO | CAN_CTRLMODE_TDC_MANUAL) + /* * struct can_tdc - CAN FD Transmission Delay Compensation parameters * @@ -33,29 +36,43 @@ * * This structure contains the parameters to calculate that SSP. * - * @tdcv: Transmitter Delay Compensation Value. Distance, in time - * quanta, from when the bit is sent on the TX pin to when it is - * received on the RX pin of the transmitter. Possible options: + * -+----------- one bit ----------+-- TX pin + * |<--- Sample Point --->| + * + * --+----------- one bit ----------+-- RX pin + * |<-------- TDCV -------->| + * |<------- TDCO ------->| + * |<----------- Secondary Sample Point ---------->| + * + * @tdcv: Transmitter Delay Compensation Value. The time needed for + * the signal to propagate, i.e. the distance, in time quanta, + * from the start of the bit on the TX pin to when it is received + * on the RX pin. @tdcv depends on the controller modes: + * + * CAN_CTRLMODE_TDC_AUTO is set: The transceiver dynamically + * measures @tdcv for each transmitted CAN FD frame and the + * value provided here should be ignored. * - * 0: automatic mode. The controller dynamically measures @tdcv - * for each transmitted CAN FD frame. + * CAN_CTRLMODE_TDC_MANUAL is set: use the fixed provided @tdcv + * value. * - * Other values: manual mode. Use the fixed provided value. + * N.B. CAN_CTRLMODE_TDC_AUTO and CAN_CTRLMODE_TDC_MANUAL are + * mutually exclusive. Only one can be set at a time. If both + * CAN_TDC_CTRLMODE_AUTO and CAN_TDC_CTRLMODE_MANUAL are unset, + * TDC is disabled and all the values of this structure should be + * ignored. * * @tdco: Transmitter Delay Compensation Offset. Offset value, in time * quanta, defining the distance between the start of the bit * reception on the RX pin of the transceiver and the SSP * position such that SSP = @tdcv + @tdco. * - * If @tdco is zero, then TDC is disabled and both @tdcv and - * @tdcf should be ignored. - * * @tdcf: Transmitter Delay Compensation Filter window. Defines the - * minimum value for the SSP position in time quanta. If SSP is - * less than @tdcf, then no delay compensations occur and the - * normal sampling point is used instead. The feature is enabled - * if and only if @tdcv is set to zero (automatic mode) and @tdcf - * is configured to a value greater than @tdco. + * minimum value for the SSP position in time quanta. If the SSP + * position is less than @tdcf, then no delay compensations occur + * and the normal sampling point is used instead. The feature is + * enabled if and only if @tdcv is set to zero (automatic mode) + * and @tdcf is configured to a value greater than @tdco. */ struct can_tdc { u32 tdcv; @@ -67,19 +84,32 @@ struct can_tdc { * struct can_tdc_const - CAN hardware-dependent constant for * Transmission Delay Compensation * - * @tdcv_max: Transmitter Delay Compensation Value maximum value. - * Should be set to zero if the controller does not support - * manual mode for tdcv. + * @tdcv_min: Transmitter Delay Compensation Value minimum value. If + * the controller does not support manual mode for tdcv + * (c.f. flag CAN_CTRLMODE_TDC_MANUAL) then this value is + * ignored. + * @tdcv_max: Transmitter Delay Compensation Value maximum value. If + * the controller does not support manual mode for tdcv + * (c.f. flag CAN_CTRLMODE_TDC_MANUAL) then this value is + * ignored. + * + * @tdco_min: Transmitter Delay Compensation Offset minimum value. * @tdco_max: Transmitter Delay Compensation Offset maximum value. * Should not be zero. If the controller does not support TDC, * then the pointer to this structure should be NULL. + * + * @tdcf_min: Transmitter Delay Compensation Filter window minimum + * value. If @tdcf_max is zero, this value is ignored. * @tdcf_max: Transmitter Delay Compensation Filter window maximum * value. Should be set to zero if the controller does not * support this feature. */ struct can_tdc_const { + u32 tdcv_min; u32 tdcv_max; + u32 tdco_min; u32 tdco_max; + u32 tdcf_min; u32 tdcf_max; }; diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 2413253e54c7..6dacbbb41e68 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -96,6 +96,10 @@ struct can_priv { #endif }; +static inline bool can_tdc_is_enabled(const struct can_priv *priv) +{ + return !!(priv->ctrlmode & CAN_CTRLMODE_TDC_MASK); +} /* helper to define static CAN controller features at device creation time */ static inline void can_set_static_ctrlmode(struct net_device *dev, diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h index f730d443b918..004cd09a7d49 100644 --- a/include/uapi/linux/can/netlink.h +++ b/include/uapi/linux/can/netlink.h @@ -101,6 +101,8 @@ struct can_ctrlmode { #define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */ #define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */ #define CAN_CTRLMODE_CC_LEN8_DLC 0x100 /* Classic CAN DLC option */ +#define CAN_CTRLMODE_TDC_AUTO 0x200 /* CAN transiver automatically calculates TDCV */ +#define CAN_CTRLMODE_TDC_MANUAL 0x400 /* TDCV is manually set up by user */ /* * CAN device statistics |