diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/power/qcom-aoss-qmp.h | 14 | ||||
| -rw-r--r-- | include/dt-bindings/power/qcom-rpmpd.h | 34 | ||||
| -rw-r--r-- | include/dt-bindings/reset/bitmain,bm1880-reset.h | 51 | ||||
| -rw-r--r-- | include/linux/platform_data/ti-sysc.h | 12 | ||||
| -rw-r--r-- | include/linux/scmi_protocol.h | 1 | ||||
| -rw-r--r-- | include/linux/soc/ti/ti_sci_protocol.h | 246 | ||||
| -rw-r--r-- | include/memory/jedec_ddr.h | 172 | ||||
| -rw-r--r-- | include/soc/fsl/bman.h | 8 | ||||
| -rw-r--r-- | include/soc/fsl/qman.h | 9 |
9 files changed, 375 insertions, 172 deletions
diff --git a/include/dt-bindings/power/qcom-aoss-qmp.h b/include/dt-bindings/power/qcom-aoss-qmp.h new file mode 100644 index 000000000000..ec336d31dee4 --- /dev/null +++ b/include/dt-bindings/power/qcom-aoss-qmp.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, Linaro Ltd. */ + +#ifndef __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H +#define __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H + +#define AOSS_QMP_LS_CDSP 0 +#define AOSS_QMP_LS_LPASS 1 +#define AOSS_QMP_LS_MODEM 2 +#define AOSS_QMP_LS_SLPI 3 +#define AOSS_QMP_LS_SPSS 4 +#define AOSS_QMP_LS_VENUS 5 + +#endif diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h index 87d9c6611682..93e36d011527 100644 --- a/include/dt-bindings/power/qcom-rpmpd.h +++ b/include/dt-bindings/power/qcom-rpmpd.h @@ -36,4 +36,38 @@ #define MSM8996_VDDSSCX 5 #define MSM8996_VDDSSCX_VFC 6 +/* MSM8998 Power Domain Indexes */ +#define MSM8998_VDDCX 0 +#define MSM8998_VDDCX_AO 1 +#define MSM8998_VDDCX_VFL 2 +#define MSM8998_VDDMX 3 +#define MSM8998_VDDMX_AO 4 +#define MSM8998_VDDMX_VFL 5 +#define MSM8998_SSCCX 6 +#define MSM8998_SSCCX_VFL 7 +#define MSM8998_SSCMX 8 +#define MSM8998_SSCMX_VFL 9 + +/* QCS404 Power Domains */ +#define QCS404_VDDMX 0 +#define QCS404_VDDMX_AO 1 +#define QCS404_VDDMX_VFL 2 +#define QCS404_LPICX 3 +#define QCS404_LPICX_VFL 4 +#define QCS404_LPIMX 5 +#define QCS404_LPIMX_VFL 6 + +/* RPM SMD Power Domain performance levels */ +#define RPM_SMD_LEVEL_RETENTION 16 +#define RPM_SMD_LEVEL_RETENTION_PLUS 32 +#define RPM_SMD_LEVEL_MIN_SVS 48 +#define RPM_SMD_LEVEL_LOW_SVS 64 +#define RPM_SMD_LEVEL_SVS 128 +#define RPM_SMD_LEVEL_SVS_PLUS 192 +#define RPM_SMD_LEVEL_NOM 256 +#define RPM_SMD_LEVEL_NOM_PLUS 320 +#define RPM_SMD_LEVEL_TURBO 384 +#define RPM_SMD_LEVEL_TURBO_NO_CPR 416 +#define RPM_SMD_LEVEL_BINNING 512 + #endif diff --git a/include/dt-bindings/reset/bitmain,bm1880-reset.h b/include/dt-bindings/reset/bitmain,bm1880-reset.h new file mode 100644 index 000000000000..4c0de5223773 --- /dev/null +++ b/include/dt-bindings/reset/bitmain,bm1880-reset.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2018 Bitmain Ltd. + * Copyright (c) 2019 Linaro Ltd. + */ + +#ifndef _DT_BINDINGS_BM1880_RESET_H +#define _DT_BINDINGS_BM1880_RESET_H + +#define BM1880_RST_MAIN_AP 0 +#define BM1880_RST_SECOND_AP 1 +#define BM1880_RST_DDR 2 +#define BM1880_RST_VIDEO 3 +#define BM1880_RST_JPEG 4 +#define BM1880_RST_VPP 5 +#define BM1880_RST_GDMA 6 +#define BM1880_RST_AXI_SRAM 7 +#define BM1880_RST_TPU 8 +#define BM1880_RST_USB 9 +#define BM1880_RST_ETH0 10 +#define BM1880_RST_ETH1 11 +#define BM1880_RST_NAND 12 +#define BM1880_RST_EMMC 13 +#define BM1880_RST_SD 14 +#define BM1880_RST_SDMA 15 +#define BM1880_RST_I2S0 16 +#define BM1880_RST_I2S1 17 +#define BM1880_RST_UART0_1_CLK 18 +#define BM1880_RST_UART0_1_ACLK 19 +#define BM1880_RST_UART2_3_CLK 20 +#define BM1880_RST_UART2_3_ACLK 21 +#define BM1880_RST_MINER 22 +#define BM1880_RST_I2C0 23 +#define BM1880_RST_I2C1 24 +#define BM1880_RST_I2C2 25 +#define BM1880_RST_I2C3 26 +#define BM1880_RST_I2C4 27 +#define BM1880_RST_PWM0 28 +#define BM1880_RST_PWM1 29 +#define BM1880_RST_PWM2 30 +#define BM1880_RST_PWM3 31 +#define BM1880_RST_SPI 32 +#define BM1880_RST_GPIO0 33 +#define BM1880_RST_GPIO1 34 +#define BM1880_RST_GPIO2 35 +#define BM1880_RST_EFUSE 36 +#define BM1880_RST_WDT 37 +#define BM1880_RST_AHB_ROM 38 +#define BM1880_RST_SPIC 39 + +#endif /* _DT_BINDINGS_BM1880_RESET_H */ diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 9256c0305968..0c587d4fc718 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -19,6 +19,7 @@ enum ti_sysc_module_type { struct ti_sysc_cookie { void *data; + void *clkdm; }; /** @@ -46,6 +47,10 @@ struct sysc_regbits { s8 emufree_shift; }; +#define SYSC_MODULE_QUIRK_HDQ1W BIT(17) +#define SYSC_MODULE_QUIRK_I2C BIT(16) +#define SYSC_MODULE_QUIRK_WDT BIT(15) +#define SYSS_QUIRK_RESETDONE_INVERTED BIT(14) #define SYSC_QUIRK_SWSUP_MSTANDBY BIT(13) #define SYSC_QUIRK_SWSUP_SIDLE_ACT BIT(12) #define SYSC_QUIRK_SWSUP_SIDLE BIT(11) @@ -125,9 +130,16 @@ struct ti_sysc_module_data { }; struct device; +struct clk; struct ti_sysc_platform_data { struct of_dev_auxdata *auxdata; + int (*init_clockdomain)(struct device *dev, struct clk *fck, + struct clk *ick, struct ti_sysc_cookie *cookie); + void (*clkdm_deny_idle)(struct device *dev, + const struct ti_sysc_cookie *cookie); + void (*clkdm_allow_idle)(struct device *dev, + const struct ti_sysc_cookie *cookie); int (*init_module)(struct device *dev, const struct ti_sysc_module_data *data, struct ti_sysc_cookie *cookie); diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index 3105055c00a7..9ff2e9357e9a 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -144,6 +144,7 @@ struct scmi_power_ops { struct scmi_sensor_info { u32 id; u8 type; + s8 scale; char name[SCMI_MAX_STR_SIZE]; }; diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h index 406e6717d252..6c610e188a44 100644 --- a/include/linux/soc/ti/ti_sci_protocol.h +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -241,12 +241,254 @@ struct ti_sci_rm_irq_ops { u16 global_event, u8 vint_status_bit); }; +/* RA config.addr_lo parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID BIT(0) +/* RA config.addr_hi parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID BIT(1) + /* RA config.count parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID BIT(2) +/* RA config.mode parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_MODE_VALID BIT(3) +/* RA config.size parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID BIT(4) +/* RA config.order_id parameter is valid for RM ring configure TISCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5) + +#define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \ + (TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID) + +/** + * struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations + * @config: configure the SoC Navigator Subsystem Ring Accelerator ring + * @get_config: get the SoC Navigator Subsystem Ring Accelerator ring + * configuration + */ +struct ti_sci_rm_ringacc_ops { + int (*config)(const struct ti_sci_handle *handle, + u32 valid_params, u16 nav_id, u16 index, + u32 addr_lo, u32 addr_hi, u32 count, u8 mode, + u8 size, u8 order_id + ); + int (*get_config)(const struct ti_sci_handle *handle, + u32 nav_id, u32 index, u8 *mode, + u32 *addr_lo, u32 *addr_hi, u32 *count, + u8 *size, u8 *order_id); +}; + +/** + * struct ti_sci_rm_psil_ops - PSI-L thread operations + * @pair: pair PSI-L source thread to a destination thread. + * If the src_thread is mapped to UDMA tchan, the corresponding channel's + * TCHAN_THRD_ID register is updated. + * If the dst_thread is mapped to UDMA rchan, the corresponding channel's + * RCHAN_THRD_ID register is updated. + * @unpair: unpair PSI-L source thread from a destination thread. + * If the src_thread is mapped to UDMA tchan, the corresponding channel's + * TCHAN_THRD_ID register is cleared. + * If the dst_thread is mapped to UDMA rchan, the corresponding channel's + * RCHAN_THRD_ID register is cleared. + */ +struct ti_sci_rm_psil_ops { + int (*pair)(const struct ti_sci_handle *handle, u32 nav_id, + u32 src_thread, u32 dst_thread); + int (*unpair)(const struct ti_sci_handle *handle, u32 nav_id, + u32 src_thread, u32 dst_thread); +}; + +/* UDMAP channel types */ +#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR 2 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR_SB 3 /* RX only */ +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBRR 10 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBVR 11 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR 12 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBVR 13 + +#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST 0 +#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_MONO 2 + +#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES 1 +#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES 2 +#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES 3 + +/* UDMAP TX/RX channel valid_params common declarations */ +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID BIT(0) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID BIT(1) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID BIT(2) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID BIT(3) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID BIT(4) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PRIORITY_VALID BIT(5) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_QOS_VALID BIT(6) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ORDER_ID_VALID BIT(7) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_SCHED_PRIORITY_VALID BIT(8) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID BIT(14) + +/** + * Configures a Navigator Subsystem UDMAP transmit channel + * + * Configures a Navigator Subsystem UDMAP transmit channel registers. + * See @ti_sci_msg_rm_udmap_tx_ch_cfg_req + */ +struct ti_sci_msg_rm_udmap_tx_ch_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_EINFO_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_PSWORDS_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID BIT(12) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID BIT(13) + u16 nav_id; + u16 index; + u8 tx_pause_on_err; + u8 tx_filt_einfo; + u8 tx_filt_pswords; + u8 tx_atype; + u8 tx_chan_type; + u8 tx_supr_tdpkt; + u16 tx_fetch_size; + u8 tx_credit_count; + u16 txcq_qnum; + u8 tx_priority; + u8 tx_qos; + u8 tx_orderid; + u16 fdepth; + u8 tx_sched_priority; + u8 tx_burst_size; +}; + +/** + * Configures a Navigator Subsystem UDMAP receive channel + * + * Configures a Navigator Subsystem UDMAP receive channel registers. + * See @ti_sci_msg_rm_udmap_rx_ch_cfg_req + */ +struct ti_sci_msg_rm_udmap_rx_ch_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID BIT(12) + u16 nav_id; + u16 index; + u16 rx_fetch_size; + u16 rxcq_qnum; + u8 rx_priority; + u8 rx_qos; + u8 rx_orderid; + u8 rx_sched_priority; + u16 flowid_start; + u16 flowid_cnt; + u8 rx_pause_on_err; + u8 rx_atype; + u8 rx_chan_type; + u8 rx_ignore_short; + u8 rx_ignore_long; + u8 rx_burst_size; +}; + +/** + * Configures a Navigator Subsystem UDMAP receive flow + * + * Configures a Navigator Subsystem UDMAP receive flow's registers. + * See @tis_ci_msg_rm_udmap_flow_cfg_req + */ +struct ti_sci_msg_rm_udmap_flow_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_EINFO_PRESENT_VALID BIT(0) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PSINFO_PRESENT_VALID BIT(1) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_ERROR_HANDLING_VALID BIT(2) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DESC_TYPE_VALID BIT(3) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SOP_OFFSET_VALID BIT(4) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_QNUM_VALID BIT(5) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_VALID BIT(6) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_VALID BIT(7) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_VALID BIT(8) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_SEL_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_SEL_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_SEL_VALID BIT(12) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_SEL_VALID BIT(13) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ0_SZ0_QNUM_VALID BIT(14) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ1_QNUM_VALID BIT(15) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ2_QNUM_VALID BIT(16) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ3_QNUM_VALID BIT(17) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PS_LOCATION_VALID BIT(18) + u16 nav_id; + u16 flow_index; + u8 rx_einfo_present; + u8 rx_psinfo_present; + u8 rx_error_handling; + u8 rx_desc_type; + u16 rx_sop_offset; + u16 rx_dest_qnum; + u8 rx_src_tag_hi; + u8 rx_src_tag_lo; + u8 rx_dest_tag_hi; + u8 rx_dest_tag_lo; + u8 rx_src_tag_hi_sel; + u8 rx_src_tag_lo_sel; + u8 rx_dest_tag_hi_sel; + u8 rx_dest_tag_lo_sel; + u16 rx_fdq0_sz0_qnum; + u16 rx_fdq1_qnum; + u16 rx_fdq2_qnum; + u16 rx_fdq3_qnum; + u8 rx_ps_location; +}; + +/** + * struct ti_sci_rm_udmap_ops - UDMA Management operations + * @tx_ch_cfg: configure SoC Navigator Subsystem UDMA transmit channel. + * @rx_ch_cfg: configure SoC Navigator Subsystem UDMA receive channel. + * @rx_flow_cfg1: configure SoC Navigator Subsystem UDMA receive flow. + */ +struct ti_sci_rm_udmap_ops { + int (*tx_ch_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params); + int (*rx_ch_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params); + int (*rx_flow_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_flow_cfg *params); +}; + +/** + * struct ti_sci_proc_ops - Processor Control operations + * @request: Request to control a physical processor. The requesting host + * should be in the processor access list + * @release: Relinquish a physical processor control + * @handover: Handover a physical processor control to another host + * in the permitted list + * @set_config: Set base configuration of a processor + * @set_control: Setup limited control flags in specific cases + * @get_status: Get the state of physical processor + * + * NOTE: The following paramteres are generic in nature for all these ops, + * -handle: Pointer to TI SCI handle as retrieved by *ti_sci_get_handle + * -pid: Processor ID + * -hid: Host ID + */ +struct ti_sci_proc_ops { + int (*request)(const struct ti_sci_handle *handle, u8 pid); + int (*release)(const struct ti_sci_handle *handle, u8 pid); + int (*handover)(const struct ti_sci_handle *handle, u8 pid, u8 hid); + int (*set_config)(const struct ti_sci_handle *handle, u8 pid, + u64 boot_vector, u32 cfg_set, u32 cfg_clr); + int (*set_control)(const struct ti_sci_handle *handle, u8 pid, + u32 ctrl_set, u32 ctrl_clr); + int (*get_status)(const struct ti_sci_handle *handle, u8 pid, + u64 *boot_vector, u32 *cfg_flags, u32 *ctrl_flags, + u32 *status_flags); +}; + /** * struct ti_sci_ops - Function support for TI SCI * @dev_ops: Device specific operations * @clk_ops: Clock specific operations * @rm_core_ops: Resource management core operations. * @rm_irq_ops: IRQ management specific operations + * @proc_ops: Processor Control specific operations */ struct ti_sci_ops { struct ti_sci_core_ops core_ops; @@ -254,6 +496,10 @@ struct ti_sci_ops { struct ti_sci_clk_ops clk_ops; struct ti_sci_rm_core_ops rm_core_ops; struct ti_sci_rm_irq_ops rm_irq_ops; + struct ti_sci_rm_ringacc_ops rm_ring_ops; + struct ti_sci_rm_psil_ops rm_psil_ops; + struct ti_sci_rm_udmap_ops rm_udmap_ops; + struct ti_sci_proc_ops proc_ops; }; /** diff --git a/include/memory/jedec_ddr.h b/include/memory/jedec_ddr.h deleted file mode 100644 index 90a9dabbe606..000000000000 --- a/include/memory/jedec_ddr.h +++ /dev/null @@ -1,172 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Definitions for DDR memories based on JEDEC specs - * - * Copyright (C) 2012 Texas Instruments, Inc. - * - * Aneesh V <aneesh@ti.com> - */ -#ifndef __LINUX_JEDEC_DDR_H -#define __LINUX_JEDEC_DDR_H - -#include <linux/types.h> - -/* DDR Densities */ -#define DDR_DENSITY_64Mb 1 -#define DDR_DENSITY_128Mb 2 -#define DDR_DENSITY_256Mb 3 -#define DDR_DENSITY_512Mb 4 -#define DDR_DENSITY_1Gb 5 -#define DDR_DENSITY_2Gb 6 -#define DDR_DENSITY_4Gb 7 -#define DDR_DENSITY_8Gb 8 -#define DDR_DENSITY_16Gb 9 -#define DDR_DENSITY_32Gb 10 - -/* DDR type */ -#define DDR_TYPE_DDR2 1 -#define DDR_TYPE_DDR3 2 -#define DDR_TYPE_LPDDR2_S4 3 -#define DDR_TYPE_LPDDR2_S2 4 -#define DDR_TYPE_LPDDR2_NVM 5 - -/* DDR IO width */ -#define DDR_IO_WIDTH_4 1 -#define DDR_IO_WIDTH_8 2 -#define DDR_IO_WIDTH_16 3 -#define DDR_IO_WIDTH_32 4 - -/* Number of Row bits */ -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 -#define R16 16 - -/* Number of Column bits */ -#define C7 7 -#define C8 8 -#define C9 9 -#define C10 10 -#define C11 11 -#define C12 12 - -/* Number of Banks */ -#define B1 0 -#define B2 1 -#define B4 2 -#define B8 3 - -/* Refresh rate in nano-seconds */ -#define T_REFI_15_6 15600 -#define T_REFI_7_8 7800 -#define T_REFI_3_9 3900 - -/* tRFC values */ -#define T_RFC_90 90000 -#define T_RFC_110 110000 -#define T_RFC_130 130000 -#define T_RFC_160 160000 -#define T_RFC_210 210000 -#define T_RFC_300 300000 -#define T_RFC_350 350000 - -/* Mode register numbers */ -#define DDR_MR0 0 -#define DDR_MR1 1 -#define DDR_MR2 2 -#define DDR_MR3 3 -#define DDR_MR4 4 -#define DDR_MR5 5 -#define DDR_MR6 6 -#define DDR_MR7 7 -#define DDR_MR8 8 -#define DDR_MR9 9 -#define DDR_MR10 10 -#define DDR_MR11 11 -#define DDR_MR16 16 -#define DDR_MR17 17 -#define DDR_MR18 18 - -/* - * LPDDR2 related defines - */ - -/* MR4 register fields */ -#define MR4_SDRAM_REF_RATE_SHIFT 0 -#define MR4_SDRAM_REF_RATE_MASK 7 -#define MR4_TUF_SHIFT 7 -#define MR4_TUF_MASK (1 << 7) - -/* MR4 SDRAM Refresh Rate field values */ -#define SDRAM_TEMP_NOMINAL 0x3 -#define SDRAM_TEMP_RESERVED_4 0x4 -#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5 -#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6 -#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7 - -#define NUM_DDR_ADDR_TABLE_ENTRIES 11 -#define NUM_DDR_TIMING_TABLE_ENTRIES 4 - -/* Structure for DDR addressing info from the JEDEC spec */ -struct lpddr2_addressing { - u32 num_banks; - u32 tREFI_ns; - u32 tRFCab_ps; -}; - -/* - * Structure for timings from the LPDDR2 datasheet - * All parameters are in pico seconds(ps) unless explicitly indicated - * with a suffix like tRAS_max_ns below - */ -struct lpddr2_timings { - u32 max_freq; - u32 min_freq; - u32 tRPab; - u32 tRCD; - u32 tWR; - u32 tRAS_min; - u32 tRRD; - u32 tWTR; - u32 tXP; - u32 tRTP; - u32 tCKESR; - u32 tDQSCK_max; - u32 tDQSCK_max_derated; - u32 tFAW; - u32 tZQCS; - u32 tZQCL; - u32 tZQinit; - u32 tRAS_max_ns; -}; - -/* - * Min value for some parameters in terms of number of tCK cycles(nCK) - * Please set to zero parameters that are not valid for a given memory - * type - */ -struct lpddr2_min_tck { - u32 tRPab; - u32 tRCD; - u32 tWR; - u32 tRASmin; - u32 tRRD; - u32 tWTR; - u32 tXP; - u32 tRTP; - u32 tCKE; - u32 tCKESR; - u32 tFAW; -}; - -extern const struct lpddr2_addressing - lpddr2_jedec_addressing_table[NUM_DDR_ADDR_TABLE_ENTRIES]; -extern const struct lpddr2_timings - lpddr2_jedec_timings[NUM_DDR_TIMING_TABLE_ENTRIES]; -extern const struct lpddr2_min_tck lpddr2_jedec_min_tck; - -#endif /* __LINUX_JEDEC_DDR_H */ diff --git a/include/soc/fsl/bman.h b/include/soc/fsl/bman.h index 5b99cb2ea5ef..173e4049d963 100644 --- a/include/soc/fsl/bman.h +++ b/include/soc/fsl/bman.h @@ -133,5 +133,13 @@ int bman_acquire(struct bman_pool *pool, struct bm_buffer *bufs, u8 num); * failed to probe or 0 if the bman driver did not probed yet. */ int bman_is_probed(void); +/** + * bman_portals_probed - Check if all cpu bound bman portals are probed + * + * Returns 1 if all the required cpu bound bman portals successfully probed, + * -1 if probe errors appeared or 0 if the bman portals did not yet finished + * probing. + */ +int bman_portals_probed(void); #endif /* __FSL_BMAN_H */ diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h index 5cc7af06c1ba..aa31c05a103a 100644 --- a/include/soc/fsl/qman.h +++ b/include/soc/fsl/qman.h @@ -1195,6 +1195,15 @@ int qman_release_cgrid(u32 id); int qman_is_probed(void); /** + * qman_portals_probed - Check if all cpu bound qman portals are probed + * + * Returns 1 if all the required cpu bound qman portals successfully probed, + * -1 if probe errors appeared or 0 if the qman portals did not yet finished + * probing. + */ +int qman_portals_probed(void); + +/** * qman_dqrr_get_ithresh - Get coalesce interrupt threshold * @portal: portal to get the value for * @ithresh: threshold pointer |