diff options
Diffstat (limited to 'kernel/rcu/update.c')
| -rw-r--r-- | kernel/rcu/update.c | 472 |
1 files changed, 86 insertions, 386 deletions
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c index 6c4b862f57d6..738842c4886b 100644 --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -41,6 +41,8 @@ #include <linux/sched/isolation.h> #include <linux/kprobes.h> #include <linux/slab.h> +#include <linux/irq_work.h> +#include <linux/rcupdate_trace.h> #define CREATE_TRACE_POINTS @@ -52,10 +54,12 @@ #define MODULE_PARAM_PREFIX "rcupdate." #ifndef CONFIG_TINY_RCU -module_param(rcu_expedited, int, 0); -module_param(rcu_normal, int, 0); -static int rcu_normal_after_boot; -module_param(rcu_normal_after_boot, int, 0); +module_param(rcu_expedited, int, 0444); +module_param(rcu_normal, int, 0444); +static int rcu_normal_after_boot = IS_ENABLED(CONFIG_PREEMPT_RT); +#if !defined(CONFIG_PREEMPT_RT) || defined(CONFIG_NO_HZ_FULL) +module_param(rcu_normal_after_boot, int, 0444); +#endif #endif /* #ifndef CONFIG_TINY_RCU */ #ifdef CONFIG_DEBUG_LOCK_ALLOC @@ -63,12 +67,12 @@ module_param(rcu_normal_after_boot, int, 0); * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section? * @ret: Best guess answer if lockdep cannot be relied on * - * Returns true if lockdep must be ignored, in which case *ret contains + * Returns true if lockdep must be ignored, in which case ``*ret`` contains * the best guess described below. Otherwise returns false, in which - * case *ret tells the caller nothing and the caller should instead + * case ``*ret`` tells the caller nothing and the caller should instead * consult lockdep. * - * If CONFIG_DEBUG_LOCK_ALLOC is selected, set *ret to nonzero iff in an + * If CONFIG_DEBUG_LOCK_ALLOC is selected, set ``*ret`` to nonzero iff in an * RCU-sched read-side critical section. In absence of * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side * critical section unless it can prove otherwise. Note that disabling @@ -81,8 +85,8 @@ module_param(rcu_normal_after_boot, int, 0); * and while lockdep is disabled. * * Note that if the CPU is in the idle loop from an RCU point of view (ie: - * that we are in the section between rcu_idle_enter() and rcu_idle_exit()) - * then rcu_read_lock_held() sets *ret to false even if the CPU did an + * that we are in the section between ct_idle_enter() and ct_idle_exit()) + * then rcu_read_lock_held() sets ``*ret`` to false even if the CPU did an * rcu_read_lock(). The reason for this is that RCU ignores CPUs that are * in such a section, considering these as in extended quiescent state, * so such a CPU is effectively never in an RCU read-side critical section @@ -98,15 +102,15 @@ module_param(rcu_normal_after_boot, int, 0); static bool rcu_read_lock_held_common(bool *ret) { if (!debug_lockdep_rcu_enabled()) { - *ret = 1; + *ret = true; return true; } if (!rcu_is_watching()) { - *ret = 0; + *ret = false; return true; } if (!rcu_lockdep_current_cpu_online()) { - *ret = 0; + *ret = false; return true; } return false; @@ -183,6 +187,8 @@ void rcu_unexpedite_gp(void) } EXPORT_SYMBOL_GPL(rcu_unexpedite_gp); +static bool rcu_boot_ended __read_mostly; + /* * Inform RCU of the end of the in-kernel boot sequence. */ @@ -191,8 +197,18 @@ void rcu_end_inkernel_boot(void) rcu_unexpedite_gp(); if (rcu_normal_after_boot) WRITE_ONCE(rcu_normal, 1); + rcu_boot_ended = true; } +/* + * Let rcutorture know when it is OK to turn it up to eleven. + */ +bool rcu_inkernel_boot_has_ended(void) +{ + return rcu_boot_ended; +} +EXPORT_SYMBOL_GPL(rcu_inkernel_boot_has_ended); + #endif /* #ifndef CONFIG_TINY_RCU */ /* @@ -227,32 +243,44 @@ core_initcall(rcu_set_runtime_mode); #ifdef CONFIG_DEBUG_LOCK_ALLOC static struct lock_class_key rcu_lock_key; -struct lockdep_map rcu_lock_map = - STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key); +struct lockdep_map rcu_lock_map = { + .name = "rcu_read_lock", + .key = &rcu_lock_key, + .wait_type_outer = LD_WAIT_FREE, + .wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT implies PREEMPT_RCU */ +}; EXPORT_SYMBOL_GPL(rcu_lock_map); static struct lock_class_key rcu_bh_lock_key; -struct lockdep_map rcu_bh_lock_map = - STATIC_LOCKDEP_MAP_INIT("rcu_read_lock_bh", &rcu_bh_lock_key); +struct lockdep_map rcu_bh_lock_map = { + .name = "rcu_read_lock_bh", + .key = &rcu_bh_lock_key, + .wait_type_outer = LD_WAIT_FREE, + .wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT makes BH preemptible. */ +}; EXPORT_SYMBOL_GPL(rcu_bh_lock_map); static struct lock_class_key rcu_sched_lock_key; -struct lockdep_map rcu_sched_lock_map = - STATIC_LOCKDEP_MAP_INIT("rcu_read_lock_sched", &rcu_sched_lock_key); +struct lockdep_map rcu_sched_lock_map = { + .name = "rcu_read_lock_sched", + .key = &rcu_sched_lock_key, + .wait_type_outer = LD_WAIT_FREE, + .wait_type_inner = LD_WAIT_SPIN, +}; EXPORT_SYMBOL_GPL(rcu_sched_lock_map); +// Tell lockdep when RCU callbacks are being invoked. static struct lock_class_key rcu_callback_key; struct lockdep_map rcu_callback_map = STATIC_LOCKDEP_MAP_INIT("rcu_callback", &rcu_callback_key); EXPORT_SYMBOL_GPL(rcu_callback_map); -int notrace debug_lockdep_rcu_enabled(void) +noinstr int notrace debug_lockdep_rcu_enabled(void) { - return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && debug_locks && + return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && READ_ONCE(debug_locks) && current->lockdep_recursion == 0; } EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled); -NOKPROBE_SYMBOL(debug_lockdep_rcu_enabled); /** * rcu_read_lock_held() - might we be in RCU read-side critical section? @@ -353,13 +381,14 @@ void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array, might_sleep(); continue; } - init_rcu_head_on_stack(&rs_array[i].head); - init_completion(&rs_array[i].completion); for (j = 0; j < i; j++) if (crcu_array[j] == crcu_array[i]) break; - if (j == i) + if (j == i) { + init_rcu_head_on_stack(&rs_array[i].head); + init_completion(&rs_array[i].completion); (crcu_array[i])(&rs_array[i].head, wakeme_after_rcu); + } } /* Wait for all callbacks to be invoked. */ @@ -370,13 +399,21 @@ void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array, for (j = 0; j < i; j++) if (crcu_array[j] == crcu_array[i]) break; - if (j == i) + if (j == i) { wait_for_completion(&rs_array[i].completion); - destroy_rcu_head_on_stack(&rs_array[i].head); + destroy_rcu_head_on_stack(&rs_array[i].head); + } } } EXPORT_SYMBOL_GPL(__wait_rcu_gp); +void finish_rcuwait(struct rcuwait *w) +{ + rcu_assign_pointer(w->task, NULL); + __set_current_state(TASK_RUNNING); +} +EXPORT_SYMBOL_GPL(finish_rcuwait); + #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD void init_rcu_head(struct rcu_head *head) { @@ -428,7 +465,7 @@ void destroy_rcu_head_on_stack(struct rcu_head *head) } EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack); -struct debug_obj_descr rcuhead_debug_descr = { +const struct debug_obj_descr rcuhead_debug_descr = { .name = "rcu_head", .is_static_object = rcuhead_is_static_object, }; @@ -464,376 +501,33 @@ EXPORT_SYMBOL_GPL(rcutorture_sched_setaffinity); #ifdef CONFIG_RCU_STALL_COMMON int rcu_cpu_stall_ftrace_dump __read_mostly; module_param(rcu_cpu_stall_ftrace_dump, int, 0644); -int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */ +int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings. EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress); module_param(rcu_cpu_stall_suppress, int, 0644); int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT; module_param(rcu_cpu_stall_timeout, int, 0644); +int rcu_exp_cpu_stall_timeout __read_mostly = CONFIG_RCU_EXP_CPU_STALL_TIMEOUT; +module_param(rcu_exp_cpu_stall_timeout, int, 0644); #endif /* #ifdef CONFIG_RCU_STALL_COMMON */ -#ifdef CONFIG_TASKS_RCU - -/* - * Simple variant of RCU whose quiescent states are voluntary context - * switch, cond_resched_rcu_qs(), user-space execution, and idle. - * As such, grace periods can take one good long time. There are no - * read-side primitives similar to rcu_read_lock() and rcu_read_unlock() - * because this implementation is intended to get the system into a safe - * state for some of the manipulations involved in tracing and the like. - * Finally, this implementation does not support high call_rcu_tasks() - * rates from multiple CPUs. If this is required, per-CPU callback lists - * will be needed. - */ - -/* Global list of callbacks and associated lock. */ -static struct rcu_head *rcu_tasks_cbs_head; -static struct rcu_head **rcu_tasks_cbs_tail = &rcu_tasks_cbs_head; -static DECLARE_WAIT_QUEUE_HEAD(rcu_tasks_cbs_wq); -static DEFINE_RAW_SPINLOCK(rcu_tasks_cbs_lock); - -/* Track exiting tasks in order to allow them to be waited for. */ -DEFINE_STATIC_SRCU(tasks_rcu_exit_srcu); - -/* Control stall timeouts. Disable with <= 0, otherwise jiffies till stall. */ -#define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10) -static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT; -module_param(rcu_task_stall_timeout, int, 0644); - -static struct task_struct *rcu_tasks_kthread_ptr; - -/** - * call_rcu_tasks() - Queue an RCU for invocation task-based grace period - * @rhp: structure to be used for queueing the RCU updates. - * @func: actual callback function to be invoked after the grace period - * - * The callback function will be invoked some time after a full grace - * period elapses, in other words after all currently executing RCU - * read-side critical sections have completed. call_rcu_tasks() assumes - * that the read-side critical sections end at a voluntary context - * switch (not a preemption!), cond_resched_rcu_qs(), entry into idle, - * or transition to usermode execution. As such, there are no read-side - * primitives analogous to rcu_read_lock() and rcu_read_unlock() because - * this primitive is intended to determine that all tasks have passed - * through a safe state, not so much for data-strcuture synchronization. - * - * See the description of call_rcu() for more detailed information on - * memory ordering guarantees. - */ -void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func) -{ - unsigned long flags; - bool needwake; - - rhp->next = NULL; - rhp->func = func; - raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags); - needwake = !rcu_tasks_cbs_head; - *rcu_tasks_cbs_tail = rhp; - rcu_tasks_cbs_tail = &rhp->next; - raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags); - /* We can't create the thread unless interrupts are enabled. */ - if (needwake && READ_ONCE(rcu_tasks_kthread_ptr)) - wake_up(&rcu_tasks_cbs_wq); -} -EXPORT_SYMBOL_GPL(call_rcu_tasks); - -/** - * synchronize_rcu_tasks - wait until an rcu-tasks grace period has elapsed. - * - * Control will return to the caller some time after a full rcu-tasks - * grace period has elapsed, in other words after all currently - * executing rcu-tasks read-side critical sections have elapsed. These - * read-side critical sections are delimited by calls to schedule(), - * cond_resched_tasks_rcu_qs(), idle execution, userspace execution, calls - * to synchronize_rcu_tasks(), and (in theory, anyway) cond_resched(). - * - * This is a very specialized primitive, intended only for a few uses in - * tracing and other situations requiring manipulation of function - * preambles and profiling hooks. The synchronize_rcu_tasks() function - * is not (yet) intended for heavy use from multiple CPUs. - * - * Note that this guarantee implies further memory-ordering guarantees. - * On systems with more than one CPU, when synchronize_rcu_tasks() returns, - * each CPU is guaranteed to have executed a full memory barrier since the - * end of its last RCU-tasks read-side critical section whose beginning - * preceded the call to synchronize_rcu_tasks(). In addition, each CPU - * having an RCU-tasks read-side critical section that extends beyond - * the return from synchronize_rcu_tasks() is guaranteed to have executed - * a full memory barrier after the beginning of synchronize_rcu_tasks() - * and before the beginning of that RCU-tasks read-side critical section. - * Note that these guarantees include CPUs that are offline, idle, or - * executing in user mode, as well as CPUs that are executing in the kernel. - * - * Furthermore, if CPU A invoked synchronize_rcu_tasks(), which returned - * to its caller on CPU B, then both CPU A and CPU B are guaranteed - * to have executed a full memory barrier during the execution of - * synchronize_rcu_tasks() -- even if CPU A and CPU B are the same CPU - * (but again only if the system has more than one CPU). - */ -void synchronize_rcu_tasks(void) -{ - /* Complain if the scheduler has not started. */ - RCU_LOCKDEP_WARN(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE, - "synchronize_rcu_tasks called too soon"); - - /* Wait for the grace period. */ - wait_rcu_gp(call_rcu_tasks); -} -EXPORT_SYMBOL_GPL(synchronize_rcu_tasks); +// Suppress boot-time RCU CPU stall warnings and rcutorture writer stall +// warnings. Also used by rcutorture even if stall warnings are excluded. +int rcu_cpu_stall_suppress_at_boot __read_mostly; // !0 = suppress boot stalls. +EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_at_boot); +module_param(rcu_cpu_stall_suppress_at_boot, int, 0444); /** - * rcu_barrier_tasks - Wait for in-flight call_rcu_tasks() callbacks. + * get_completed_synchronize_rcu - Return a pre-completed polled state cookie * - * Although the current implementation is guaranteed to wait, it is not - * obligated to, for example, if there are no pending callbacks. - */ -void rcu_barrier_tasks(void) -{ - /* There is only one callback queue, so this is easy. ;-) */ - synchronize_rcu_tasks(); -} -EXPORT_SYMBOL_GPL(rcu_barrier_tasks); - -/* See if tasks are still holding out, complain if so. */ -static void check_holdout_task(struct task_struct *t, - bool needreport, bool *firstreport) -{ - int cpu; - - if (!READ_ONCE(t->rcu_tasks_holdout) || - t->rcu_tasks_nvcsw != READ_ONCE(t->nvcsw) || - !READ_ONCE(t->on_rq) || - (IS_ENABLED(CONFIG_NO_HZ_FULL) && - !is_idle_task(t) && t->rcu_tasks_idle_cpu >= 0)) { - WRITE_ONCE(t->rcu_tasks_holdout, false); - list_del_init(&t->rcu_tasks_holdout_list); - put_task_struct(t); - return; - } - rcu_request_urgent_qs_task(t); - if (!needreport) - return; - if (*firstreport) { - pr_err("INFO: rcu_tasks detected stalls on tasks:\n"); - *firstreport = false; - } - cpu = task_cpu(t); - pr_alert("%p: %c%c nvcsw: %lu/%lu holdout: %d idle_cpu: %d/%d\n", - t, ".I"[is_idle_task(t)], - "N."[cpu < 0 || !tick_nohz_full_cpu(cpu)], - t->rcu_tasks_nvcsw, t->nvcsw, t->rcu_tasks_holdout, - t->rcu_tasks_idle_cpu, cpu); - sched_show_task(t); -} - -/* RCU-tasks kthread that detects grace periods and invokes callbacks. */ -static int __noreturn rcu_tasks_kthread(void *arg) -{ - unsigned long flags; - struct task_struct *g, *t; - unsigned long lastreport; - struct rcu_head *list; - struct rcu_head *next; - LIST_HEAD(rcu_tasks_holdouts); - int fract; - - /* Run on housekeeping CPUs by default. Sysadm can move if desired. */ - housekeeping_affine(current, HK_FLAG_RCU); - - /* - * Each pass through the following loop makes one check for - * newly arrived callbacks, and, if there are some, waits for - * one RCU-tasks grace period and then invokes the callbacks. - * This loop is terminated by the system going down. ;-) - */ - for (;;) { - - /* Pick up any new callbacks. */ - raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags); - list = rcu_tasks_cbs_head; - rcu_tasks_cbs_head = NULL; - rcu_tasks_cbs_tail = &rcu_tasks_cbs_head; - raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags); - - /* If there were none, wait a bit and start over. */ - if (!list) { - wait_event_interruptible(rcu_tasks_cbs_wq, - rcu_tasks_cbs_head); - if (!rcu_tasks_cbs_head) { - WARN_ON(signal_pending(current)); - schedule_timeout_interruptible(HZ/10); - } - continue; - } - - /* - * Wait for all pre-existing t->on_rq and t->nvcsw - * transitions to complete. Invoking synchronize_rcu() - * suffices because all these transitions occur with - * interrupts disabled. Without this synchronize_rcu(), - * a read-side critical section that started before the - * grace period might be incorrectly seen as having started - * after the grace period. - * - * This synchronize_rcu() also dispenses with the - * need for a memory barrier on the first store to - * ->rcu_tasks_holdout, as it forces the store to happen - * after the beginning of the grace period. - */ - synchronize_rcu(); - - /* - * There were callbacks, so we need to wait for an - * RCU-tasks grace period. Start off by scanning - * the task list for tasks that are not already - * voluntarily blocked. Mark these tasks and make - * a list of them in rcu_tasks_holdouts. - */ - rcu_read_lock(); - for_each_process_thread(g, t) { - if (t != current && READ_ONCE(t->on_rq) && - !is_idle_task(t)) { - get_task_struct(t); - t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw); - WRITE_ONCE(t->rcu_tasks_holdout, true); - list_add(&t->rcu_tasks_holdout_list, - &rcu_tasks_holdouts); - } - } - rcu_read_unlock(); - - /* - * Wait for tasks that are in the process of exiting. - * This does only part of the job, ensuring that all - * tasks that were previously exiting reach the point - * where they have disabled preemption, allowing the - * later synchronize_rcu() to finish the job. - */ - synchronize_srcu(&tasks_rcu_exit_srcu); - - /* - * Each pass through the following loop scans the list - * of holdout tasks, removing any that are no longer - * holdouts. When the list is empty, we are done. - */ - lastreport = jiffies; - - /* Start off with HZ/10 wait and slowly back off to 1 HZ wait*/ - fract = 10; - - for (;;) { - bool firstreport; - bool needreport; - int rtst; - struct task_struct *t1; - - if (list_empty(&rcu_tasks_holdouts)) - break; - - /* Slowly back off waiting for holdouts */ - schedule_timeout_interruptible(HZ/fract); - - if (fract > 1) - fract--; - - rtst = READ_ONCE(rcu_task_stall_timeout); - needreport = rtst > 0 && - time_after(jiffies, lastreport + rtst); - if (needreport) - lastreport = jiffies; - firstreport = true; - WARN_ON(signal_pending(current)); - list_for_each_entry_safe(t, t1, &rcu_tasks_holdouts, - rcu_tasks_holdout_list) { - check_holdout_task(t, needreport, &firstreport); - cond_resched(); - } - } - - /* - * Because ->on_rq and ->nvcsw are not guaranteed - * to have a full memory barriers prior to them in the - * schedule() path, memory reordering on other CPUs could - * cause their RCU-tasks read-side critical sections to - * extend past the end of the grace period. However, - * because these ->nvcsw updates are carried out with - * interrupts disabled, we can use synchronize_rcu() - * to force the needed ordering on all such CPUs. - * - * This synchronize_rcu() also confines all - * ->rcu_tasks_holdout accesses to be within the grace - * period, avoiding the need for memory barriers for - * ->rcu_tasks_holdout accesses. - * - * In addition, this synchronize_rcu() waits for exiting - * tasks to complete their final preempt_disable() region - * of execution, cleaning up after the synchronize_srcu() - * above. - */ - synchronize_rcu(); - - /* Invoke the callbacks. */ - while (list) { - next = list->next; - local_bh_disable(); - list->func(list); - local_bh_enable(); - list = next; - cond_resched(); - } - /* Paranoid sleep to keep this from entering a tight loop */ - schedule_timeout_uninterruptible(HZ/10); - } -} - -/* Spawn rcu_tasks_kthread() at core_initcall() time. */ -static int __init rcu_spawn_tasks_kthread(void) -{ - struct task_struct *t; - - t = kthread_run(rcu_tasks_kthread, NULL, "rcu_tasks_kthread"); - if (WARN_ONCE(IS_ERR(t), "%s: Could not start Tasks-RCU grace-period kthread, OOM is now expected behavior\n", __func__)) - return 0; - smp_mb(); /* Ensure others see full kthread. */ - WRITE_ONCE(rcu_tasks_kthread_ptr, t); - return 0; -} -core_initcall(rcu_spawn_tasks_kthread); - -/* Do the srcu_read_lock() for the above synchronize_srcu(). */ -void exit_tasks_rcu_start(void) -{ - preempt_disable(); - current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu); - preempt_enable(); -} - -/* Do the srcu_read_unlock() for the above synchronize_srcu(). */ -void exit_tasks_rcu_finish(void) -{ - preempt_disable(); - __srcu_read_unlock(&tasks_rcu_exit_srcu, current->rcu_tasks_idx); - preempt_enable(); -} - -#endif /* #ifdef CONFIG_TASKS_RCU */ - -#ifndef CONFIG_TINY_RCU - -/* - * Print any non-default Tasks RCU settings. + * Returns a value that will always be treated by functions like + * poll_state_synchronize_rcu() as a cookie whose grace period has already + * completed. */ -static void __init rcu_tasks_bootup_oddness(void) +unsigned long get_completed_synchronize_rcu(void) { -#ifdef CONFIG_TASKS_RCU - if (rcu_task_stall_timeout != RCU_TASK_STALL_TIMEOUT) - pr_info("\tTasks-RCU CPU stall warnings timeout set to %d (rcu_task_stall_timeout).\n", rcu_task_stall_timeout); - else - pr_info("\tTasks RCU enabled.\n"); -#endif /* #ifdef CONFIG_TASKS_RCU */ + return RCU_GET_STATE_COMPLETED; } - -#endif /* #ifndef CONFIG_TINY_RCU */ +EXPORT_SYMBOL_GPL(get_completed_synchronize_rcu); #ifdef CONFIG_PROVE_RCU @@ -852,6 +546,7 @@ static void test_callback(struct rcu_head *r) } DEFINE_STATIC_SRCU(early_srcu); +static unsigned long early_srcu_cookie; struct early_boot_kfree_rcu { struct rcu_head rh; @@ -864,8 +559,10 @@ static void early_boot_test_call_rcu(void) struct early_boot_kfree_rcu *rhp; call_rcu(&head, test_callback); - if (IS_ENABLED(CONFIG_SRCU)) + if (IS_ENABLED(CONFIG_SRCU)) { + early_srcu_cookie = start_poll_synchronize_srcu(&early_srcu); call_srcu(&early_srcu, &shead, test_callback); + } rhp = kmalloc(sizeof(*rhp), GFP_KERNEL); if (!WARN_ON_ONCE(!rhp)) kfree_rcu(rhp, rh); @@ -891,6 +588,7 @@ static int rcu_verify_early_boot_tests(void) if (IS_ENABLED(CONFIG_SRCU)) { early_boot_test_counter++; srcu_barrier(&early_srcu); + WARN_ON_ONCE(!poll_state_synchronize_srcu(&early_srcu, early_srcu_cookie)); } } if (rcu_self_test_counter != early_boot_test_counter) { @@ -905,6 +603,8 @@ late_initcall(rcu_verify_early_boot_tests); void rcu_early_boot_tests(void) {} #endif /* CONFIG_PROVE_RCU */ +#include "tasks.h" + #ifndef CONFIG_TINY_RCU /* |