diff options
Diffstat (limited to 'sound/soc/atmel/atmel_ssc_dai.c')
| -rw-r--r-- | sound/soc/atmel/atmel_ssc_dai.c | 790 |
1 files changed, 790 insertions, 0 deletions
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 000000000000..c5d67900d666 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,790 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino@endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir_mask = SSC_DIR_MASK_PLAYBACK; + else + dir_mask = SSC_DIR_MASK_CAPTURE; + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + if (ssc_p->initialized) { + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + + +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +static int __init atmel_ssc_modinit(void) +{ + return snd_soc_register_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai)); +} +module_init(atmel_ssc_modinit); + +static void __exit atmel_ssc_modexit(void) +{ + snd_soc_unregister_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai)); +} +module_exit(atmel_ssc_modexit); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); |