diff options
Diffstat (limited to 'sound/soc/codecs/wm8904.c')
-rw-r--r-- | sound/soc/codecs/wm8904.c | 37 |
1 files changed, 20 insertions, 17 deletions
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 5ffbaddd6e49..ca6a01a230af 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -317,7 +317,7 @@ static int wm8904_configure_clocking(struct snd_soc_component *component) unsigned int clock0, clock2, rate; /* Gate the clock while we're updating to avoid misclocking */ - clock2 = snd_soc_component_read32(component, WM8904_CLOCK_RATES_2); + clock2 = snd_soc_component_read(component, WM8904_CLOCK_RATES_2); snd_soc_component_update_bits(component, WM8904_CLOCK_RATES_2, WM8904_SYSCLK_SRC, 0); @@ -374,7 +374,7 @@ static void wm8904_set_drc(struct snd_soc_component *component) int save, i; /* Save any enables; the configuration should clear them. */ - save = snd_soc_component_read32(component, WM8904_DRC_0); + save = snd_soc_component_read(component, WM8904_DRC_0); for (i = 0; i < WM8904_DRC_REGS; i++) snd_soc_component_update_bits(component, WM8904_DRC_0 + i, 0xffff, @@ -447,7 +447,7 @@ static void wm8904_set_retune_mobile(struct snd_soc_component *component) /* The EQ will be disabled while reconfiguring it, remember the * current configuration. */ - save = snd_soc_component_read32(component, WM8904_EQ1); + save = snd_soc_component_read(component, WM8904_EQ1); for (i = 0; i < WM8904_EQ_REGS; i++) snd_soc_component_update_bits(component, WM8904_EQ1 + i, 0xffff, @@ -776,7 +776,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w, /* Wait for DC servo to complete */ dcs_mask <<= WM8904_DCS_CAL_COMPLETE_SHIFT; do { - val = snd_soc_component_read32(component, WM8904_DC_SERVO_READBACK_0); + val = snd_soc_component_read(component, WM8904_DC_SERVO_READBACK_0); if ((val & dcs_mask) == dcs_mask) break; @@ -814,8 +814,8 @@ static int out_pga_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMD: /* Cache the DC servo configuration; this will be * invalidated if we change the configuration. */ - wm8904->dcs_state[dcs_l] = snd_soc_component_read32(component, dcs_l_reg); - wm8904->dcs_state[dcs_r] = snd_soc_component_read32(component, dcs_r_reg); + wm8904->dcs_state[dcs_l] = snd_soc_component_read(component, dcs_l_reg); + wm8904->dcs_state[dcs_r] = snd_soc_component_read(component, dcs_r_reg); snd_soc_component_update_bits(component, WM8904_DC_SERVO_0, dcs_mask, 0); @@ -1436,7 +1436,7 @@ static int wm8904_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_B: aif1 |= 0x3 | WM8904_AIF_LRCLK_INV; - /* fall through */ + fallthrough; case SND_SOC_DAIFMT_DSP_A: aif1 |= 0x3; break; @@ -1671,7 +1671,7 @@ static int wm8904_set_fll(struct snd_soc_dai *dai, int fll_id, int source, Fout == wm8904->fll_fout) return 0; - clock2 = snd_soc_component_read32(component, WM8904_CLOCK_RATES_2); + clock2 = snd_soc_component_read(component, WM8904_CLOCK_RATES_2); if (Fout == 0) { dev_dbg(component->dev, "FLL disabled\n"); @@ -1716,7 +1716,7 @@ static int wm8904_set_fll(struct snd_soc_dai *dai, int fll_id, int source, /* Save current state then disable the FLL and SYSCLK to avoid * misclocking */ - fll1 = snd_soc_component_read32(component, WM8904_FLL_CONTROL_1); + fll1 = snd_soc_component_read(component, WM8904_FLL_CONTROL_1); snd_soc_component_update_bits(component, WM8904_CLOCK_RATES_2, WM8904_CLK_SYS_ENA, 0); snd_soc_component_update_bits(component, WM8904_FLL_CONTROL_1, @@ -1824,7 +1824,7 @@ static int wm8904_set_sysclk(struct snd_soc_dai *dai, int clk_id, break; } clk_id = WM8904_CLK_MCLK; - /* fallthrough */ + fallthrough; case WM8904_CLK_MCLK: priv->sysclk_src = clk_id; @@ -1846,7 +1846,7 @@ static int wm8904_set_sysclk(struct snd_soc_dai *dai, int clk_id, return 0; } -static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute) +static int wm8904_mute(struct snd_soc_dai *codec_dai, int mute, int direction) { struct snd_soc_component *component = codec_dai->component; int val; @@ -1962,7 +1962,8 @@ static const struct snd_soc_dai_ops wm8904_dai_ops = { .set_tdm_slot = wm8904_set_tdm_slot, .set_pll = wm8904_set_fll, .hw_params = wm8904_hw_params, - .digital_mute = wm8904_digital_mute, + .mute_stream = wm8904_mute, + .no_capture_mute = 1, }; static struct snd_soc_dai_driver wm8904_dai = { @@ -1982,7 +1983,7 @@ static struct snd_soc_dai_driver wm8904_dai = { .formats = WM8904_FORMATS, }, .ops = &wm8904_dai_ops, - .symmetric_rates = 1, + .symmetric_rate = 1, }; static void wm8904_handle_retune_mobile_pdata(struct snd_soc_component *component) @@ -2130,7 +2131,6 @@ static const struct snd_soc_component_driver soc_component_dev_wm8904 = { .set_bias_level = wm8904_set_bias_level, .use_pmdown_time = 1, .endianness = 1, - .non_legacy_dai_naming = 1, }; static const struct regmap_config wm8904_regmap = { @@ -2161,8 +2161,9 @@ static const struct of_device_id wm8904_of_match[] = { MODULE_DEVICE_TABLE(of, wm8904_of_match); #endif -static int wm8904_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +static const struct i2c_device_id wm8904_i2c_id[]; + +static int wm8904_i2c_probe(struct i2c_client *i2c) { struct wm8904_priv *wm8904; unsigned int val; @@ -2196,6 +2197,8 @@ static int wm8904_i2c_probe(struct i2c_client *i2c, return -EINVAL; wm8904->devtype = (enum wm8904_type)match->data; } else { + const struct i2c_device_id *id = + i2c_match_id(wm8904_i2c_id, i2c); wm8904->devtype = id->driver_data; } @@ -2327,7 +2330,7 @@ static struct i2c_driver wm8904_i2c_driver = { .name = "wm8904", .of_match_table = of_match_ptr(wm8904_of_match), }, - .probe = wm8904_i2c_probe, + .probe_new = wm8904_i2c_probe, .id_table = wm8904_i2c_id, }; |