diff options
Diffstat (limited to 'sound/soc/intel/Kconfig')
-rw-r--r-- | sound/soc/intel/Kconfig | 108 |
1 files changed, 46 insertions, 62 deletions
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index c8de0bb5bed9..d2ca710ac3fa 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -15,66 +15,26 @@ config SND_SOC_INTEL_SST_TOPLEVEL if SND_SOC_INTEL_SST_TOPLEVEL -config SND_SST_IPC - tristate - # This option controls the IPC core for HiFi2 platforms - -config SND_SST_IPC_PCI - tristate - select SND_SST_IPC - # This option controls the PCI-based IPC for HiFi2 platforms - # (Medfield, Merrifield). - -config SND_SST_IPC_ACPI - tristate - select SND_SST_IPC - # This option controls the ACPI-based IPC for HiFi2 platforms - # (Baytrail, Cherrytrail) - -config SND_SOC_INTEL_SST_ACPI - tristate - # This option controls ACPI-based probing on - # Haswell/Broadwell/Baytrail legacy and will be set - # when these platforms are enabled - config SND_SOC_INTEL_SST tristate -config SND_SOC_INTEL_SST_FIRMWARE - tristate +config SND_SOC_INTEL_CATPT + tristate "Haswell and Broadwell" + depends on ACPI || COMPILE_TEST + depends on DMADEVICES && SND_DMA_SGBUF select DW_DMAC_CORE - # This option controls firmware download on - # Haswell/Broadwell/Baytrail legacy and will be set - # when these platforms are enabled - -config SND_SOC_INTEL_HASWELL - tristate "Haswell/Broadwell Platforms" - depends on SND_DMA_SGBUF - depends on DMADEVICES && ACPI - select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_ACPI - select SND_SOC_INTEL_SST_FIRMWARE - select SND_SOC_ACPI_INTEL_MATCH + select SND_SOC_ACPI if ACPI + select WANT_DEV_COREDUMP + select SND_INTEL_DSP_CONFIG help - If you have a Intel Haswell or Broadwell platform connected to - an I2S codec, then enable this option by saying Y or m. This is - typically used for Chromebooks. This is a recommended option. - This option is mutually exclusive with the SOF support on - Broadwell. If you want to enable SOF on Broadwell, you need to - deselect this option first. + Enable support for Intel(R) Haswell and Broadwell platforms + with I2S codec present. This is a recommended option. + Say Y or m if you have such device. + If unsure, say N. -config SND_SOC_INTEL_BAYTRAIL - tristate "Baytrail (legacy) Platforms" - depends on DMADEVICES && ACPI && SND_SST_ATOM_HIFI2_PLATFORM=n && SND_SOC_SOF_BAYTRAIL=n - select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_ACPI - select SND_SOC_INTEL_SST_FIRMWARE - select SND_SOC_ACPI_INTEL_MATCH - help - If you have a Intel Baytrail platform connected to an I2S codec, - then enable this option by saying Y or m. This was typically used - for Baytrail Chromebooks but this option is now deprecated and is - not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead. +config SND_SOC_INTEL_HASWELL + tristate + select SND_SOC_INTEL_CATPT config SND_SST_ATOM_HIFI2_PLATFORM tristate @@ -83,7 +43,6 @@ config SND_SST_ATOM_HIFI2_PLATFORM config SND_SST_ATOM_HIFI2_PLATFORM_PCI tristate "PCI HiFi2 (Merrifield) Platforms" depends on X86 && PCI - select SND_SST_IPC_PCI select SND_SST_ATOM_HIFI2_PLATFORM help If you have a Intel Merrifield/Edison platform, then @@ -96,9 +55,9 @@ config SND_SST_ATOM_HIFI2_PLATFORM_ACPI tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms" default ACPI depends on X86 && ACPI && PCI - select SND_SST_IPC_ACPI select SND_SST_ATOM_HIFI2_PLATFORM select SND_SOC_ACPI_INTEL_MATCH + select SND_INTEL_DSP_CONFIG select IOSF_MBI help If you have a Intel Baytrail or Cherrytrail platform with an I2S @@ -209,12 +168,8 @@ config SND_SOC_INTEL_SKYLAKE_SSP_CLK config SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC bool "HDAudio codec support" help - This option broke audio on Linus' Skylake laptop in December 2018 - and the race conditions during the probe were not fixed since. - This option is DEPRECATED, all HDaudio codec support needs - to be handled by the SOF driver. - Distributions should not enable this option and there are no known - users of this capability. + If you have Intel Skylake or Kabylake with HDAudio codec + and DMIC present then enable this option by saying Y. config SND_SOC_INTEL_SKYLAKE_COMMON tristate @@ -244,6 +199,35 @@ config SND_SOC_ACPI_INTEL_MATCH endif ## SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL +config SND_SOC_INTEL_KEEMBAY + tristate "Keembay Platforms" + depends on ARCH_KEEMBAY || COMPILE_TEST + depends on COMMON_CLK + select SND_DMAENGINE_PCM + select SND_SOC_GENERIC_DMAENGINE_PCM + help + If you have a Intel Keembay platform then enable this option + by saying Y or m. + +config SND_SOC_INTEL_AVS + tristate "Intel AVS driver" + depends on X86 || COMPILE_TEST + depends on PCI + depends on COMMON_CLK + select SND_SOC_ACPI if ACPI + select SND_SOC_TOPOLOGY + select SND_SOC_HDA + select SND_HDA_EXT_CORE + select SND_HDA_DSP_LOADER + select SND_INTEL_DSP_CONFIG + select WANT_DEV_COREDUMP + help + Enable support for Intel(R) cAVS 1.5 platforms with DSP + capabilities. This includes Skylake, Kabylake, Amberlake and + Apollolake. + +# Machine board drivers +source "sound/soc/intel/avs/boards/Kconfig" # ASoC codec drivers source "sound/soc/intel/boards/Kconfig" |