diff options
Diffstat (limited to 'sound/soc/intel/catpt/registers.h')
| -rw-r--r-- | sound/soc/intel/catpt/registers.h | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/sound/soc/intel/catpt/registers.h b/sound/soc/intel/catpt/registers.h new file mode 100644 index 000000000000..47280d82842e --- /dev/null +++ b/sound/soc/intel/catpt/registers.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2020 Intel Corporation. All rights reserved. + * + * Author: Cezary Rojewski <cezary.rojewski@intel.com> + */ + +#ifndef __SND_SOC_INTEL_CATPT_REGS_H +#define __SND_SOC_INTEL_CATPT_REGS_H + +#include <linux/bitops.h> +#include <linux/iopoll.h> +#include <uapi/linux/pci_regs.h> + +#define CATPT_SHIM_REGS_SIZE 4096 +#define CATPT_DMA_REGS_SIZE 1024 +#define CATPT_DMA_COUNT 2 +#define CATPT_SSP_REGS_SIZE 512 + +/* DSP Shim registers */ + +#define CATPT_SHIM_CS1 0x00 +#define CATPT_SHIM_ISC 0x18 +#define CATPT_SHIM_ISD 0x20 +#define CATPT_SHIM_IMC 0x28 +#define CATPT_SHIM_IMD 0x30 +#define CATPT_SHIM_IPCC 0x38 +#define CATPT_SHIM_IPCD 0x40 +#define CATPT_SHIM_CLKCTL 0x78 +#define CATPT_SHIM_CS2 0x80 +#define CATPT_SHIM_LTRC 0xE0 +#define CATPT_SHIM_HMDC 0xE8 + +#define CATPT_CS_LPCS BIT(31) +#define CATPT_CS_SFCR(ssp) BIT(27 + (ssp)) +#define CATPT_CS_S1IOCS BIT(23) +#define CATPT_CS_S0IOCS BIT(21) +#define CATPT_CS_PCE BIT(15) +#define CATPT_CS_SDPM(ssp) BIT(11 + (ssp)) +#define CATPT_CS_STALL BIT(10) +#define CATPT_CS_DCS GENMASK(6, 4) +/* b100 DSP core & audio fabric high clock */ +#define CATPT_CS_DCS_HIGH (0x4 << 4) +#define CATPT_CS_SBCS(ssp) BIT(2 + (ssp)) +#define CATPT_CS_RST BIT(1) + +#define CATPT_ISC_IPCDB BIT(1) +#define CATPT_ISC_IPCCD BIT(0) +#define CATPT_ISD_DCPWM BIT(31) +#define CATPT_ISD_IPCCB BIT(1) +#define CATPT_ISD_IPCDD BIT(0) + +#define CATPT_IMC_IPCDB BIT(1) +#define CATPT_IMC_IPCCD BIT(0) +#define CATPT_IMD_IPCCB BIT(1) +#define CATPT_IMD_IPCDD BIT(0) + +#define CATPT_IPCC_BUSY BIT(31) +#define CATPT_IPCC_DONE BIT(30) +#define CATPT_IPCD_BUSY BIT(31) +#define CATPT_IPCD_DONE BIT(30) + +#define CATPT_CLKCTL_CFCIP BIT(31) +#define CATPT_CLKCTL_SMOS GENMASK(25, 24) + +#define CATPT_HMDC_HDDA(e, ch) BIT(8 * (e) + (ch)) + +/* defaults to reset SHIM registers to after each power cycle */ +#define CATPT_CS_DEFAULT 0x8480040E +#define CATPT_ISC_DEFAULT 0x0 +#define CATPT_ISD_DEFAULT 0x0 +#define CATPT_IMC_DEFAULT 0x7FFF0003 +#define CATPT_IMD_DEFAULT 0x7FFF0003 +#define CATPT_IPCC_DEFAULT 0x0 +#define CATPT_IPCD_DEFAULT 0x0 +#define CATPT_CLKCTL_DEFAULT 0x7FF +#define CATPT_CS2_DEFAULT 0x0 +#define CATPT_LTRC_DEFAULT 0x0 +#define CATPT_HMDC_DEFAULT 0x0 + +/* PCI Configuration registers */ + +#define CATPT_PCI_PMCAPID 0x80 +#define CATPT_PCI_PMCS (CATPT_PCI_PMCAPID + PCI_PM_CTRL) +#define CATPT_PCI_VDRTCTL0 0xA0 +#define CATPT_PCI_VDRTCTL2 0xA8 + +#define CATPT_VDRTCTL2_DTCGE BIT(10) +#define CATPT_VDRTCTL2_DCLCGE BIT(1) +#define CATPT_VDRTCTL2_CGEALL 0xF7F + +/* LPT PCI Configuration bits */ + +#define LPT_VDRTCTL0_DSRAMPGE(b) BIT(16 + (b)) +#define LPT_VDRTCTL0_DSRAMPGE_MASK GENMASK(31, 16) +#define LPT_VDRTCTL0_ISRAMPGE(b) BIT(6 + (b)) +#define LPT_VDRTCTL0_ISRAMPGE_MASK GENMASK(15, 6) +#define LPT_VDRTCTL0_D3SRAMPGD BIT(2) +#define LPT_VDRTCTL0_D3PGD BIT(1) +#define LPT_VDRTCTL0_APLLSE BIT(0) + +/* WPT PCI Configuration bits */ + +#define WPT_VDRTCTL0_DSRAMPGE(b) BIT(12 + (b)) +#define WPT_VDRTCTL0_DSRAMPGE_MASK GENMASK(31, 12) +#define WPT_VDRTCTL0_ISRAMPGE(b) BIT(2 + (b)) +#define WPT_VDRTCTL0_ISRAMPGE_MASK GENMASK(11, 2) +#define WPT_VDRTCTL0_D3SRAMPGD BIT(1) +#define WPT_VDRTCTL0_D3PGD BIT(0) + +#define WPT_VDRTCTL2_APLLSE BIT(31) + +/* defaults to reset SSP registers to after each power cycle */ +#define CATPT_SSC0_DEFAULT 0x0 +#define CATPT_SSC1_DEFAULT 0x0 +#define CATPT_SSS_DEFAULT 0xF004 +#define CATPT_SSIT_DEFAULT 0x0 +#define CATPT_SSD_DEFAULT 0xC43893A3 +#define CATPT_SSTO_DEFAULT 0x0 +#define CATPT_SSPSP_DEFAULT 0x0 +#define CATPT_SSTSA_DEFAULT 0x0 +#define CATPT_SSRSA_DEFAULT 0x0 +#define CATPT_SSTSS_DEFAULT 0x0 +#define CATPT_SSCR2_DEFAULT 0x0 +#define CATPT_SSPSP2_DEFAULT 0x0 + +/* Physically the same block, access address differs between host and dsp */ +#define CATPT_DSP_DRAM_OFFSET 0x400000 +#define catpt_to_host_offset(offset) ((offset) & ~(CATPT_DSP_DRAM_OFFSET)) +#define catpt_to_dsp_offset(offset) ((offset) | CATPT_DSP_DRAM_OFFSET) + +#define CATPT_MEMBLOCK_SIZE 0x8000 +#define catpt_num_dram(cdev) (hweight_long((cdev)->spec->dram_mask)) +#define catpt_num_iram(cdev) (hweight_long((cdev)->spec->iram_mask)) +#define catpt_dram_size(cdev) (catpt_num_dram(cdev) * CATPT_MEMBLOCK_SIZE) +#define catpt_iram_size(cdev) (catpt_num_iram(cdev) * CATPT_MEMBLOCK_SIZE) + +/* registry I/O helpers */ + +#define catpt_shim_addr(cdev) \ + ((cdev)->lpe_ba + (cdev)->spec->host_shim_offset) +#define catpt_dma_addr(cdev, dma) \ + ((cdev)->lpe_ba + (cdev)->spec->host_dma_offset[dma]) +#define catpt_ssp_addr(cdev, ssp) \ + ((cdev)->lpe_ba + (cdev)->spec->host_ssp_offset[ssp]) +#define catpt_inbox_addr(cdev) \ + ((cdev)->lpe_ba + (cdev)->ipc.config.inbox_offset) +#define catpt_outbox_addr(cdev) \ + ((cdev)->lpe_ba + (cdev)->ipc.config.outbox_offset) + +#define catpt_writel_ssp(cdev, ssp, reg, val) \ + writel(val, catpt_ssp_addr(cdev, ssp) + (reg)) + +#define catpt_readl_shim(cdev, reg) \ + readl(catpt_shim_addr(cdev) + CATPT_SHIM_##reg) +#define catpt_writel_shim(cdev, reg, val) \ + writel(val, catpt_shim_addr(cdev) + CATPT_SHIM_##reg) +#define catpt_updatel_shim(cdev, reg, mask, val) \ + catpt_writel_shim(cdev, reg, \ + (catpt_readl_shim(cdev, reg) & ~(mask)) | (val)) + +#define catpt_readl_poll_shim(cdev, reg, val, cond, delay_us, timeout_us) \ + readl_poll_timeout(catpt_shim_addr(cdev) + CATPT_SHIM_##reg, \ + val, cond, delay_us, timeout_us) + +#define catpt_readl_pci(cdev, reg) \ + readl(cdev->pci_ba + CATPT_PCI_##reg) +#define catpt_writel_pci(cdev, reg, val) \ + writel(val, cdev->pci_ba + CATPT_PCI_##reg) +#define catpt_updatel_pci(cdev, reg, mask, val) \ + catpt_writel_pci(cdev, reg, \ + (catpt_readl_pci(cdev, reg) & ~(mask)) | (val)) + +#define catpt_readl_poll_pci(cdev, reg, val, cond, delay_us, timeout_us) \ + readl_poll_timeout((cdev)->pci_ba + CATPT_PCI_##reg, \ + val, cond, delay_us, timeout_us) + +#endif |