diff options
Diffstat (limited to 'tools/include/uapi')
28 files changed, 1771 insertions, 529 deletions
diff --git a/tools/include/uapi/asm-generic/fcntl.h b/tools/include/uapi/asm-generic/fcntl.h index ac190958c981..b02c8e0f4057 100644 --- a/tools/include/uapi/asm-generic/fcntl.h +++ b/tools/include/uapi/asm-generic/fcntl.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_GENERIC_FCNTL_H #define _ASM_GENERIC_FCNTL_H @@ -90,7 +91,7 @@ /* a horrid kludge trying to make sure that this will fail on old kernels */ #define O_TMPFILE (__O_TMPFILE | O_DIRECTORY) -#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT) +#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT) #ifndef O_NDELAY #define O_NDELAY O_NONBLOCK @@ -115,13 +116,13 @@ #define F_GETSIG 11 /* for sockets. */ #endif -#ifndef CONFIG_64BIT +#if __BITS_PER_LONG == 32 || defined(__KERNEL__) #ifndef F_GETLK64 #define F_GETLK64 12 /* using 'struct flock64' */ #define F_SETLK64 13 #define F_SETLKW64 14 #endif -#endif +#endif /* __BITS_PER_LONG == 32 || defined(__KERNEL__) */ #ifndef F_SETOWN_EX #define F_SETOWN_EX 15 @@ -142,7 +143,7 @@ * record locks, but are "owned" by the open file description, not the * process. This means that they are inherited across fork() like BSD (flock) * locks, and they are only released automatically when the last reference to - * the the open file against which they were acquired is put. + * the open file against which they were acquired is put. */ #define F_OFD_GETLK 36 #define F_OFD_SETLK 37 @@ -180,6 +181,10 @@ struct f_owner_ex { blocking */ #define LOCK_UN 8 /* remove lock */ +/* + * LOCK_MAND support has been removed from the kernel. We leave the symbols + * here to not break legacy builds, but these should not be used in new code. + */ #define LOCK_MAND 32 /* This is a mandatory flock ... */ #define LOCK_READ 64 /* which allows concurrent read operations */ #define LOCK_WRITE 128 /* which allows concurrent write operations */ @@ -188,24 +193,19 @@ struct f_owner_ex { #define F_LINUX_SPECIFIC_BASE 1024 #ifndef HAVE_ARCH_STRUCT_FLOCK -#ifndef __ARCH_FLOCK_PAD -#define __ARCH_FLOCK_PAD -#endif - struct flock { short l_type; short l_whence; __kernel_off_t l_start; __kernel_off_t l_len; __kernel_pid_t l_pid; - __ARCH_FLOCK_PAD -}; +#ifdef __ARCH_FLOCK_EXTRA_SYSID + __ARCH_FLOCK_EXTRA_SYSID #endif - -#ifndef HAVE_ARCH_STRUCT_FLOCK64 -#ifndef __ARCH_FLOCK64_PAD -#define __ARCH_FLOCK64_PAD +#ifdef __ARCH_FLOCK_PAD + __ARCH_FLOCK_PAD #endif +}; struct flock64 { short l_type; @@ -213,8 +213,10 @@ struct flock64 { __kernel_loff_t l_start; __kernel_loff_t l_len; __kernel_pid_t l_pid; +#ifdef __ARCH_FLOCK64_PAD __ARCH_FLOCK64_PAD -}; #endif +}; +#endif /* HAVE_ARCH_STRUCT_FLOCK */ #endif /* _ASM_GENERIC_FCNTL_H */ diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h index 1567a3294c3d..6ce1f1ceb432 100644 --- a/tools/include/uapi/asm-generic/mman-common.h +++ b/tools/include/uapi/asm-generic/mman-common.h @@ -75,6 +75,10 @@ #define MADV_POPULATE_READ 22 /* populate (prefault) page tables readable */ #define MADV_POPULATE_WRITE 23 /* populate (prefault) page tables writable */ +#define MADV_DONTNEED_LOCKED 24 /* like DONTNEED, but drop locked pages too */ + +#define MADV_COLLAPSE 25 /* Synchronous hugepage collapse */ + /* compatibility flags */ #define MAP_FILE 0 diff --git a/tools/include/uapi/asm-generic/socket.h b/tools/include/uapi/asm-generic/socket.h index 77f7c1638eb1..8756df13be50 100644 --- a/tools/include/uapi/asm-generic/socket.h +++ b/tools/include/uapi/asm-generic/socket.h @@ -119,6 +119,8 @@ #define SO_DETACH_REUSEPORT_BPF 68 +#define SO_RCVMARK 75 + #if !defined(__KERNEL__) #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h index 4557a8b6086f..45fa180cc56a 100644 --- a/tools/include/uapi/asm-generic/unistd.h +++ b/tools/include/uapi/asm-generic/unistd.h @@ -383,7 +383,7 @@ __SYSCALL(__NR_syslog, sys_syslog) /* kernel/ptrace.c */ #define __NR_ptrace 117 -__SYSCALL(__NR_ptrace, sys_ptrace) +__SC_COMP(__NR_ptrace, sys_ptrace, compat_sys_ptrace) /* kernel/sched/core.c */ #define __NR_sched_setparam 118 @@ -779,7 +779,7 @@ __SYSCALL(__NR_rseq, sys_rseq) #define __NR_kexec_file_load 294 __SYSCALL(__NR_kexec_file_load, sys_kexec_file_load) /* 295 through 402 are unassigned to sync up with generic numbers, don't use */ -#if __BITS_PER_LONG == 32 +#if defined(__SYSCALL_COMPAT) || __BITS_PER_LONG == 32 #define __NR_clock_gettime64 403 __SYSCALL(__NR_clock_gettime64, sys_clock_gettime) #define __NR_clock_settime64 404 @@ -883,8 +883,11 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease) #define __NR_futex_waitv 449 __SYSCALL(__NR_futex_waitv, sys_futex_waitv) +#define __NR_set_mempolicy_home_node 450 +__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) + #undef __NR_syscalls -#define __NR_syscalls 450 +#define __NR_syscalls 451 /* * 32 bit systems traditionally used different diff --git a/tools/include/uapi/asm/bitsperlong.h b/tools/include/uapi/asm/bitsperlong.h index edba4d93e9e6..da5206517158 100644 --- a/tools/include/uapi/asm/bitsperlong.h +++ b/tools/include/uapi/asm/bitsperlong.h @@ -17,6 +17,8 @@ #include "../../../arch/riscv/include/uapi/asm/bitsperlong.h" #elif defined(__alpha__) #include "../../../arch/alpha/include/uapi/asm/bitsperlong.h" +#elif defined(__loongarch__) +#include "../../../arch/loongarch/include/uapi/asm/bitsperlong.h" #else #include <asm-generic/bitsperlong.h> #endif diff --git a/tools/include/uapi/asm/bpf_perf_event.h b/tools/include/uapi/asm/bpf_perf_event.h index 39acc149d843..d7dfeab0d71a 100644 --- a/tools/include/uapi/asm/bpf_perf_event.h +++ b/tools/include/uapi/asm/bpf_perf_event.h @@ -1,5 +1,7 @@ #if defined(__aarch64__) #include "../../arch/arm64/include/uapi/asm/bpf_perf_event.h" +#elif defined(__arc__) +#include "../../arch/arc/include/uapi/asm/bpf_perf_event.h" #elif defined(__s390__) #include "../../arch/s390/include/uapi/asm/bpf_perf_event.h" #elif defined(__riscv) diff --git a/tools/include/uapi/asm/errno.h b/tools/include/uapi/asm/errno.h index d30439b4b8ab..869379f91fe4 100644 --- a/tools/include/uapi/asm/errno.h +++ b/tools/include/uapi/asm/errno.h @@ -9,8 +9,8 @@ #include "../../../arch/alpha/include/uapi/asm/errno.h" #elif defined(__mips__) #include "../../../arch/mips/include/uapi/asm/errno.h" -#elif defined(__xtensa__) -#include "../../../arch/xtensa/include/uapi/asm/errno.h" +#elif defined(__hppa__) +#include "../../../arch/parisc/include/uapi/asm/errno.h" #else #include <asm-generic/errno.h> #endif diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h index 3b810b53ba8b..642808520d92 100644 --- a/tools/include/uapi/drm/drm.h +++ b/tools/include/uapi/drm/drm.h @@ -1096,6 +1096,24 @@ extern "C" { #define DRM_IOCTL_SYNCOBJ_TRANSFER DRM_IOWR(0xCC, struct drm_syncobj_transfer) #define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL DRM_IOWR(0xCD, struct drm_syncobj_timeline_array) +/** + * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata. + * + * This queries metadata about a framebuffer. User-space fills + * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the + * struct as the output. + * + * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles + * will be filled with GEM buffer handles. Planes are valid until one has a + * zero handle -- this can be used to compute the number of planes. + * + * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid + * until one has a zero &drm_mode_fb_cmd2.pitches. + * + * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set + * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the + * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier. + */ #define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2) /* diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h index 914ebd9290e5..520ad2691a99 100644 --- a/tools/include/uapi/drm/i915_drm.h +++ b/tools/include/uapi/drm/i915_drm.h @@ -154,25 +154,77 @@ enum i915_mocs_table_index { I915_MOCS_CACHED, }; -/* +/** + * enum drm_i915_gem_engine_class - uapi engine type enumeration + * * Different engines serve different roles, and there may be more than one - * engine serving each role. enum drm_i915_gem_engine_class provides a - * classification of the role of the engine, which may be used when requesting - * operations to be performed on a certain subset of engines, or for providing - * information about that group. + * engine serving each role. This enum provides a classification of the role + * of the engine, which may be used when requesting operations to be performed + * on a certain subset of engines, or for providing information about that + * group. */ enum drm_i915_gem_engine_class { + /** + * @I915_ENGINE_CLASS_RENDER: + * + * Render engines support instructions used for 3D, Compute (GPGPU), + * and programmable media workloads. These instructions fetch data and + * dispatch individual work items to threads that operate in parallel. + * The threads run small programs (called "kernels" or "shaders") on + * the GPU's execution units (EUs). + */ I915_ENGINE_CLASS_RENDER = 0, + + /** + * @I915_ENGINE_CLASS_COPY: + * + * Copy engines (also referred to as "blitters") support instructions + * that move blocks of data from one location in memory to another, + * or that fill a specified location of memory with fixed data. + * Copy engines can perform pre-defined logical or bitwise operations + * on the source, destination, or pattern data. + */ I915_ENGINE_CLASS_COPY = 1, + + /** + * @I915_ENGINE_CLASS_VIDEO: + * + * Video engines (also referred to as "bit stream decode" (BSD) or + * "vdbox") support instructions that perform fixed-function media + * decode and encode. + */ I915_ENGINE_CLASS_VIDEO = 2, + + /** + * @I915_ENGINE_CLASS_VIDEO_ENHANCE: + * + * Video enhancement engines (also referred to as "vebox") support + * instructions related to image enhancement. + */ I915_ENGINE_CLASS_VIDEO_ENHANCE = 3, - /* should be kept compact */ + /** + * @I915_ENGINE_CLASS_COMPUTE: + * + * Compute engines support a subset of the instructions available + * on render engines: compute engines support Compute (GPGPU) and + * programmable media workloads, but do not support the 3D pipeline. + */ + I915_ENGINE_CLASS_COMPUTE = 4, + /* Values in this enum should be kept compact. */ + + /** + * @I915_ENGINE_CLASS_INVALID: + * + * Placeholder value to represent an invalid engine class assignment. + */ I915_ENGINE_CLASS_INVALID = -1 }; -/* +/** + * struct i915_engine_class_instance - Engine class/instance identifier + * * There may be more than one engine fulfilling any role within the system. * Each engine of a class is given a unique instance number and therefore * any engine can be specified by its class:instance tuplet. APIs that allow @@ -180,10 +232,21 @@ enum drm_i915_gem_engine_class { * for this identification. */ struct i915_engine_class_instance { - __u16 engine_class; /* see enum drm_i915_gem_engine_class */ - __u16 engine_instance; + /** + * @engine_class: + * + * Engine class from enum drm_i915_gem_engine_class + */ + __u16 engine_class; #define I915_ENGINE_CLASS_INVALID_NONE -1 #define I915_ENGINE_CLASS_INVALID_VIRTUAL -2 + + /** + * @engine_instance: + * + * Engine instance. + */ + __u16 engine_instance; }; /** @@ -688,14 +751,27 @@ typedef struct drm_i915_irq_wait { /* Must be kept compact -- no holes and well documented */ -typedef struct drm_i915_getparam { +/** + * struct drm_i915_getparam - Driver parameter query structure. + */ +struct drm_i915_getparam { + /** @param: Driver parameter to query. */ __s32 param; - /* + + /** + * @value: Address of memory where queried value should be put. + * * WARNING: Using pointers instead of fixed-size u64 means we need to write * compat32 code. Don't repeat this mistake. */ int __user *value; -} drm_i915_getparam_t; +}; + +/** + * typedef drm_i915_getparam_t - Driver parameter query structure. + * See struct drm_i915_getparam. + */ +typedef struct drm_i915_getparam drm_i915_getparam_t; /* Ioctl to set kernel params: */ @@ -1118,10 +1194,16 @@ struct drm_i915_gem_exec_object2 { /** * When the EXEC_OBJECT_PINNED flag is specified this is populated by * the user with the GTT offset at which this object will be pinned. + * * When the I915_EXEC_NO_RELOC flag is specified this must contain the * presumed_offset of the object. + * * During execbuffer2 the kernel populates it with the value of the * current GTT offset of the object, for future presumed_offset writes. + * + * See struct drm_i915_gem_create_ext for the rules when dealing with + * alignment restrictions with I915_MEMORY_CLASS_DEVICE, on devices with + * minimum page sizes, like DG2. */ __u64 offset; @@ -1170,76 +1252,119 @@ struct drm_i915_gem_exec_object2 { __u64 rsvd2; }; +/** + * struct drm_i915_gem_exec_fence - An input or output fence for the execbuf + * ioctl. + * + * The request will wait for input fence to signal before submission. + * + * The returned output fence will be signaled after the completion of the + * request. + */ struct drm_i915_gem_exec_fence { - /** - * User's handle for a drm_syncobj to wait on or signal. - */ + /** @handle: User's handle for a drm_syncobj to wait on or signal. */ __u32 handle; + /** + * @flags: Supported flags are: + * + * I915_EXEC_FENCE_WAIT: + * Wait for the input fence before request submission. + * + * I915_EXEC_FENCE_SIGNAL: + * Return request completion fence as output + */ + __u32 flags; #define I915_EXEC_FENCE_WAIT (1<<0) #define I915_EXEC_FENCE_SIGNAL (1<<1) #define __I915_EXEC_FENCE_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SIGNAL << 1)) - __u32 flags; }; -/* - * See drm_i915_gem_execbuffer_ext_timeline_fences. - */ -#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0 - -/* +/** + * struct drm_i915_gem_execbuffer_ext_timeline_fences - Timeline fences + * for execbuf ioctl. + * * This structure describes an array of drm_syncobj and associated points for * timeline variants of drm_syncobj. It is invalid to append this structure to * the execbuf if I915_EXEC_FENCE_ARRAY is set. */ struct drm_i915_gem_execbuffer_ext_timeline_fences { +#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0 + /** @base: Extension link. See struct i915_user_extension. */ struct i915_user_extension base; /** - * Number of element in the handles_ptr & value_ptr arrays. + * @fence_count: Number of elements in the @handles_ptr & @value_ptr + * arrays. */ __u64 fence_count; /** - * Pointer to an array of struct drm_i915_gem_exec_fence of length - * fence_count. + * @handles_ptr: Pointer to an array of struct drm_i915_gem_exec_fence + * of length @fence_count. */ __u64 handles_ptr; /** - * Pointer to an array of u64 values of length fence_count. Values - * must be 0 for a binary drm_syncobj. A Value of 0 for a timeline - * drm_syncobj is invalid as it turns a drm_syncobj into a binary one. + * @values_ptr: Pointer to an array of u64 values of length + * @fence_count. + * Values must be 0 for a binary drm_syncobj. A Value of 0 for a + * timeline drm_syncobj is invalid as it turns a drm_syncobj into a + * binary one. */ __u64 values_ptr; }; +/** + * struct drm_i915_gem_execbuffer2 - Structure for DRM_I915_GEM_EXECBUFFER2 + * ioctl. + */ struct drm_i915_gem_execbuffer2 { - /** - * List of gem_exec_object2 structs - */ + /** @buffers_ptr: Pointer to a list of gem_exec_object2 structs */ __u64 buffers_ptr; + + /** @buffer_count: Number of elements in @buffers_ptr array */ __u32 buffer_count; - /** Offset in the batchbuffer to start execution from. */ + /** + * @batch_start_offset: Offset in the batchbuffer to start execution + * from. + */ __u32 batch_start_offset; - /** Bytes used in batchbuffer from batch_start_offset */ + + /** + * @batch_len: Length in bytes of the batch buffer, starting from the + * @batch_start_offset. If 0, length is assumed to be the batch buffer + * object size. + */ __u32 batch_len; + + /** @DR1: deprecated */ __u32 DR1; + + /** @DR4: deprecated */ __u32 DR4; + + /** @num_cliprects: See @cliprects_ptr */ __u32 num_cliprects; + /** - * This is a struct drm_clip_rect *cliprects if I915_EXEC_FENCE_ARRAY - * & I915_EXEC_USE_EXTENSIONS are not set. + * @cliprects_ptr: Kernel clipping was a DRI1 misfeature. + * + * It is invalid to use this field if I915_EXEC_FENCE_ARRAY or + * I915_EXEC_USE_EXTENSIONS flags are not set. * * If I915_EXEC_FENCE_ARRAY is set, then this is a pointer to an array - * of struct drm_i915_gem_exec_fence and num_cliprects is the length - * of the array. + * of &drm_i915_gem_exec_fence and @num_cliprects is the length of the + * array. * * If I915_EXEC_USE_EXTENSIONS is set, then this is a pointer to a - * single struct i915_user_extension and num_cliprects is 0. + * single &i915_user_extension and num_cliprects is 0. */ __u64 cliprects_ptr; + + /** @flags: Execbuf flags */ + __u64 flags; #define I915_EXEC_RING_MASK (0x3f) #define I915_EXEC_DEFAULT (0<<0) #define I915_EXEC_RENDER (1<<0) @@ -1257,10 +1382,6 @@ struct drm_i915_gem_execbuffer2 { #define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */ #define I915_EXEC_CONSTANTS_ABSOLUTE (1<<6) #define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */ - __u64 flags; - __u64 rsvd1; /* now used for context info */ - __u64 rsvd2; -}; /** Resets the SO write offset registers for transform feedback on gen7. */ #define I915_EXEC_GEN7_SOL_RESET (1<<8) @@ -1363,9 +1484,23 @@ struct drm_i915_gem_execbuffer2 { * drm_i915_gem_execbuffer_ext enum. */ #define I915_EXEC_USE_EXTENSIONS (1 << 21) - #define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_USE_EXTENSIONS << 1)) + /** @rsvd1: Context id */ + __u64 rsvd1; + + /** + * @rsvd2: in and out sync_file file descriptors. + * + * When I915_EXEC_FENCE_IN or I915_EXEC_FENCE_SUBMIT flag is set, the + * lower 32 bits of this field will have the in sync_file fd (input). + * + * When I915_EXEC_FENCE_OUT flag is set, the upper 32 bits of this + * field will have the out sync_file fd (output). + */ + __u64 rsvd2; +}; + #define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) #define i915_execbuffer2_set_context_id(eb2, context) \ (eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK @@ -1745,19 +1880,58 @@ struct drm_i915_gem_context_create { __u32 pad; }; +/** + * struct drm_i915_gem_context_create_ext - Structure for creating contexts. + */ struct drm_i915_gem_context_create_ext { - __u32 ctx_id; /* output: id of new context*/ + /** @ctx_id: Id of the created context (output) */ + __u32 ctx_id; + + /** + * @flags: Supported flags are: + * + * I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS: + * + * Extensions may be appended to this structure and driver must check + * for those. See @extensions. + * + * I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE + * + * Created context will have single timeline. + */ __u32 flags; #define I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS (1u << 0) #define I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE (1u << 1) #define I915_CONTEXT_CREATE_FLAGS_UNKNOWN \ (-(I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE << 1)) + + /** + * @extensions: Zero-terminated chain of extensions. + * + * I915_CONTEXT_CREATE_EXT_SETPARAM: + * Context parameter to set or query during context creation. + * See struct drm_i915_gem_context_create_ext_setparam. + * + * I915_CONTEXT_CREATE_EXT_CLONE: + * This extension has been removed. On the off chance someone somewhere + * has attempted to use it, never re-use this extension number. + */ __u64 extensions; +#define I915_CONTEXT_CREATE_EXT_SETPARAM 0 +#define I915_CONTEXT_CREATE_EXT_CLONE 1 }; +/** + * struct drm_i915_gem_context_param - Context parameter to set or query. + */ struct drm_i915_gem_context_param { + /** @ctx_id: Context id */ __u32 ctx_id; + + /** @size: Size of the parameter @value */ __u32 size; + + /** @param: Parameter to set or query */ __u64 param; #define I915_CONTEXT_PARAM_BAN_PERIOD 0x1 /* I915_CONTEXT_PARAM_NO_ZEROMAP has been removed. On the off chance @@ -1904,6 +2078,7 @@ struct drm_i915_gem_context_param { #define I915_CONTEXT_PARAM_PROTECTED_CONTENT 0xd /* Must be kept compact -- no holes and well documented */ + /** @value: Context parameter value to be set or queried */ __u64 value; }; @@ -2054,7 +2229,7 @@ struct i915_context_engines_load_balance { __u64 mbz64; /* reserved for future use; must be zero */ - struct i915_engine_class_instance engines[0]; + struct i915_engine_class_instance engines[]; } __attribute__((packed)); #define I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(name__, N__) struct { \ @@ -2092,7 +2267,7 @@ struct i915_context_engines_bond { __u64 flags; /* all undefined flags must be zero */ __u64 mbz64[4]; /* reserved for future use; must be zero */ - struct i915_engine_class_instance engines[0]; + struct i915_engine_class_instance engines[]; } __attribute__((packed)); #define I915_DEFINE_CONTEXT_ENGINES_BOND(name__, N__) struct { \ @@ -2219,7 +2394,7 @@ struct i915_context_engines_parallel_submit { * length = width (i) * num_siblings (j) * index = j + i * num_siblings */ - struct i915_engine_class_instance engines[0]; + struct i915_engine_class_instance engines[]; } __packed; @@ -2302,23 +2477,29 @@ struct i915_context_param_engines { struct i915_engine_class_instance engines[N__]; \ } __attribute__((packed)) name__ +/** + * struct drm_i915_gem_context_create_ext_setparam - Context parameter + * to set or query during context creation. + */ struct drm_i915_gem_context_create_ext_setparam { -#define I915_CONTEXT_CREATE_EXT_SETPARAM 0 + /** @base: Extension link. See struct i915_user_extension. */ struct i915_user_extension base; + + /** + * @param: Context parameter to set or query. + * See struct drm_i915_gem_context_param. + */ struct drm_i915_gem_context_param param; }; -/* This API has been removed. On the off chance someone somewhere has - * attempted to use it, never re-use this extension number. - */ -#define I915_CONTEXT_CREATE_EXT_CLONE 1 - struct drm_i915_gem_context_destroy { __u32 ctx_id; __u32 pad; }; -/* +/** + * struct drm_i915_gem_vm_control - Structure to create or destroy VM. + * * DRM_I915_GEM_VM_CREATE - * * Create a new virtual memory address space (ppGTT) for use within a context @@ -2328,20 +2509,23 @@ struct drm_i915_gem_context_destroy { * The id of new VM (bound to the fd) for use with I915_CONTEXT_PARAM_VM is * returned in the outparam @id. * - * No flags are defined, with all bits reserved and must be zero. - * * An extension chain maybe provided, starting with @extensions, and terminated * by the @next_extension being 0. Currently, no extensions are defined. * * DRM_I915_GEM_VM_DESTROY - * - * Destroys a previously created VM id, specified in @id. + * Destroys a previously created VM id, specified in @vm_id. * * No extensions or flags are allowed currently, and so must be zero. */ struct drm_i915_gem_vm_control { + /** @extensions: Zero-terminated chain of extensions. */ __u64 extensions; + + /** @flags: reserved for future usage, currently MBZ */ __u32 flags; + + /** @vm_id: Id of the VM created or to be destroyed */ __u32 vm_id; }; @@ -2651,24 +2835,65 @@ enum drm_i915_perf_record_type { DRM_I915_PERF_RECORD_MAX /* non-ABI */ }; -/* +/** + * struct drm_i915_perf_oa_config + * * Structure to upload perf dynamic configuration into the kernel. */ struct drm_i915_perf_oa_config { - /** String formatted like "%08x-%04x-%04x-%04x-%012x" */ + /** + * @uuid: + * + * String formatted like "%\08x-%\04x-%\04x-%\04x-%\012x" + */ char uuid[36]; + /** + * @n_mux_regs: + * + * Number of mux regs in &mux_regs_ptr. + */ __u32 n_mux_regs; + + /** + * @n_boolean_regs: + * + * Number of boolean regs in &boolean_regs_ptr. + */ __u32 n_boolean_regs; + + /** + * @n_flex_regs: + * + * Number of flex regs in &flex_regs_ptr. + */ __u32 n_flex_regs; - /* - * These fields are pointers to tuples of u32 values (register address, - * value). For example the expected length of the buffer pointed by - * mux_regs_ptr is (2 * sizeof(u32) * n_mux_regs). + /** + * @mux_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_mux_regs). */ __u64 mux_regs_ptr; + + /** + * @boolean_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_boolean_regs). + */ __u64 boolean_regs_ptr; + + /** + * @flex_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_flex_regs). + */ __u64 flex_regs_ptr; }; @@ -2679,12 +2904,24 @@ struct drm_i915_perf_oa_config { * @data_ptr is also depends on the specific @query_id. */ struct drm_i915_query_item { - /** @query_id: The id for this query */ + /** + * @query_id: + * + * The id for this query. Currently accepted query IDs are: + * - %DRM_I915_QUERY_TOPOLOGY_INFO (see struct drm_i915_query_topology_info) + * - %DRM_I915_QUERY_ENGINE_INFO (see struct drm_i915_engine_info) + * - %DRM_I915_QUERY_PERF_CONFIG (see struct drm_i915_query_perf_config) + * - %DRM_I915_QUERY_MEMORY_REGIONS (see struct drm_i915_query_memory_regions) + * - %DRM_I915_QUERY_HWCONFIG_BLOB (see `GuC HWCONFIG blob uAPI`) + * - %DRM_I915_QUERY_GEOMETRY_SUBSLICES (see struct drm_i915_query_topology_info) + */ __u64 query_id; -#define DRM_I915_QUERY_TOPOLOGY_INFO 1 -#define DRM_I915_QUERY_ENGINE_INFO 2 -#define DRM_I915_QUERY_PERF_CONFIG 3 -#define DRM_I915_QUERY_MEMORY_REGIONS 4 +#define DRM_I915_QUERY_TOPOLOGY_INFO 1 +#define DRM_I915_QUERY_ENGINE_INFO 2 +#define DRM_I915_QUERY_PERF_CONFIG 3 +#define DRM_I915_QUERY_MEMORY_REGIONS 4 +#define DRM_I915_QUERY_HWCONFIG_BLOB 5 +#define DRM_I915_QUERY_GEOMETRY_SUBSLICES 6 /* Must be kept compact -- no holes and well documented */ /** @@ -2700,14 +2937,17 @@ struct drm_i915_query_item { /** * @flags: * - * When query_id == DRM_I915_QUERY_TOPOLOGY_INFO, must be 0. + * When &query_id == %DRM_I915_QUERY_TOPOLOGY_INFO, must be 0. * - * When query_id == DRM_I915_QUERY_PERF_CONFIG, must be one of the + * When &query_id == %DRM_I915_QUERY_PERF_CONFIG, must be one of the * following: * - * - DRM_I915_QUERY_PERF_CONFIG_LIST - * - DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID - * - DRM_I915_QUERY_PERF_CONFIG_FOR_UUID + * - %DRM_I915_QUERY_PERF_CONFIG_LIST + * - %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID + * - %DRM_I915_QUERY_PERF_CONFIG_FOR_UUID + * + * When &query_id == %DRM_I915_QUERY_GEOMETRY_SUBSLICES must contain + * a struct i915_engine_class_instance that references a render engine. */ __u32 flags; #define DRM_I915_QUERY_PERF_CONFIG_LIST 1 @@ -2765,66 +3005,112 @@ struct drm_i915_query { __u64 items_ptr; }; -/* - * Data written by the kernel with query DRM_I915_QUERY_TOPOLOGY_INFO : - * - * data: contains the 3 pieces of information : - * - * - the slice mask with one bit per slice telling whether a slice is - * available. The availability of slice X can be queried with the following - * formula : - * - * (data[X / 8] >> (X % 8)) & 1 - * - * - the subslice mask for each slice with one bit per subslice telling - * whether a subslice is available. Gen12 has dual-subslices, which are - * similar to two gen11 subslices. For gen12, this array represents dual- - * subslices. The availability of subslice Y in slice X can be queried - * with the following formula : - * - * (data[subslice_offset + - * X * subslice_stride + - * Y / 8] >> (Y % 8)) & 1 - * - * - the EU mask for each subslice in each slice with one bit per EU telling - * whether an EU is available. The availability of EU Z in subslice Y in - * slice X can be queried with the following formula : +/** + * struct drm_i915_query_topology_info * - * (data[eu_offset + - * (X * max_subslices + Y) * eu_stride + - * Z / 8] >> (Z % 8)) & 1 + * Describes slice/subslice/EU information queried by + * %DRM_I915_QUERY_TOPOLOGY_INFO */ struct drm_i915_query_topology_info { - /* + /** + * @flags: + * * Unused for now. Must be cleared to zero. */ __u16 flags; + /** + * @max_slices: + * + * The number of bits used to express the slice mask. + */ __u16 max_slices; + + /** + * @max_subslices: + * + * The number of bits used to express the subslice mask. + */ __u16 max_subslices; + + /** + * @max_eus_per_subslice: + * + * The number of bits in the EU mask that correspond to a single + * subslice's EUs. + */ __u16 max_eus_per_subslice; - /* + /** + * @subslice_offset: + * * Offset in data[] at which the subslice masks are stored. */ __u16 subslice_offset; - /* + /** + * @subslice_stride: + * * Stride at which each of the subslice masks for each slice are * stored. */ __u16 subslice_stride; - /* + /** + * @eu_offset: + * * Offset in data[] at which the EU masks are stored. */ __u16 eu_offset; - /* + /** + * @eu_stride: + * * Stride at which each of the EU masks for each subslice are stored. */ __u16 eu_stride; + /** + * @data: + * + * Contains 3 pieces of information : + * + * - The slice mask with one bit per slice telling whether a slice is + * available. The availability of slice X can be queried with the + * following formula : + * + * .. code:: c + * + * (data[X / 8] >> (X % 8)) & 1 + * + * Starting with Xe_HP platforms, Intel hardware no longer has + * traditional slices so i915 will always report a single slice + * (hardcoded slicemask = 0x1) which contains all of the platform's + * subslices. I.e., the mask here does not reflect any of the newer + * hardware concepts such as "gslices" or "cslices" since userspace + * is capable of inferring those from the subslice mask. + * + * - The subslice mask for each slice with one bit per subslice telling + * whether a subslice is available. Starting with Gen12 we use the + * term "subslice" to refer to what the hardware documentation + * describes as a "dual-subslices." The availability of subslice Y + * in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[subslice_offset + X * subslice_stride + Y / 8] >> (Y % 8)) & 1 + * + * - The EU mask for each subslice in each slice, with one bit per EU + * telling whether an EU is available. The availability of EU Z in + * subslice Y in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[eu_offset + + * (X * max_subslices + Y) * eu_stride + + * Z / 8 + * ] >> (Z % 8)) & 1 + */ __u8 data[]; }; @@ -2945,52 +3231,68 @@ struct drm_i915_query_engine_info { struct drm_i915_engine_info engines[]; }; -/* - * Data written by the kernel with query DRM_I915_QUERY_PERF_CONFIG. +/** + * struct drm_i915_query_perf_config + * + * Data written by the kernel with query %DRM_I915_QUERY_PERF_CONFIG and + * %DRM_I915_QUERY_GEOMETRY_SUBSLICES. */ struct drm_i915_query_perf_config { union { - /* - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets - * this fields to the number of configurations available. + /** + * @n_configs: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets this fields to + * the number of configurations available. */ __u64 n_configs; - /* - * When query_id == DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, - * i915 will use the value in this field as configuration - * identifier to decide what data to write into config_ptr. + /** + * @config: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. */ __u64 config; - /* - * When query_id == DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, - * i915 will use the value in this field as configuration - * identifier to decide what data to write into config_ptr. + /** + * @uuid: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. * * String formatted like "%08x-%04x-%04x-%04x-%012x" */ char uuid[36]; }; - /* + /** + * @flags: + * * Unused for now. Must be cleared to zero. */ __u32 flags; - /* - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_LIST, i915 will - * write an array of __u64 of configuration identifiers. + /** + * @data: + * + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_LIST, + * i915 will write an array of __u64 of configuration identifiers. * - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_DATA, i915 will - * write a struct drm_i915_perf_oa_config. If the following fields of - * drm_i915_perf_oa_config are set not set to 0, i915 will write into - * the associated pointers the values of submitted when the + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_DATA, + * i915 will write a struct drm_i915_perf_oa_config. If the following + * fields of struct drm_i915_perf_oa_config are not set to 0, i915 will + * write into the associated pointers the values of submitted when the * configuration was created : * - * - n_mux_regs - * - n_boolean_regs - * - n_flex_regs + * - &drm_i915_perf_oa_config.n_mux_regs + * - &drm_i915_perf_oa_config.n_boolean_regs + * - &drm_i915_perf_oa_config.n_flex_regs */ __u8 data[]; }; @@ -3020,36 +3322,6 @@ struct drm_i915_gem_memory_class_instance { * struct drm_i915_memory_region_info - Describes one region as known to the * driver. * - * Note that we reserve some stuff here for potential future work. As an example - * we might want expose the capabilities for a given region, which could include - * things like if the region is CPU mappable/accessible, what are the supported - * mapping types etc. - * - * Note that to extend struct drm_i915_memory_region_info and struct - * drm_i915_query_memory_regions in the future the plan is to do the following: - * - * .. code-block:: C - * - * struct drm_i915_memory_region_info { - * struct drm_i915_gem_memory_class_instance region; - * union { - * __u32 rsvd0; - * __u32 new_thing1; - * }; - * ... - * union { - * __u64 rsvd1[8]; - * struct { - * __u64 new_thing2; - * __u64 new_thing3; - * ... - * }; - * }; - * }; - * - * With this things should remain source compatible between versions for - * userspace, even as we add new fields. - * * Note this is using both struct drm_i915_query_item and struct drm_i915_query. * For this new query we are adding the new query id DRM_I915_QUERY_MEMORY_REGIONS * at &drm_i915_query_item.query_id. @@ -3061,14 +3333,81 @@ struct drm_i915_memory_region_info { /** @rsvd0: MBZ */ __u32 rsvd0; - /** @probed_size: Memory probed by the driver (-1 = unknown) */ + /** + * @probed_size: Memory probed by the driver + * + * Note that it should not be possible to ever encounter a zero value + * here, also note that no current region type will ever return -1 here. + * Although for future region types, this might be a possibility. The + * same applies to the other size fields. + */ __u64 probed_size; - /** @unallocated_size: Estimate of memory remaining (-1 = unknown) */ + /** + * @unallocated_size: Estimate of memory remaining + * + * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable accounting. + * Without this (or if this is an older kernel) the value here will + * always equal the @probed_size. Note this is only currently tracked + * for I915_MEMORY_CLASS_DEVICE regions (for other types the value here + * will always equal the @probed_size). + */ __u64 unallocated_size; - /** @rsvd1: MBZ */ - __u64 rsvd1[8]; + union { + /** @rsvd1: MBZ */ + __u64 rsvd1[8]; + struct { + /** + * @probed_cpu_visible_size: Memory probed by the driver + * that is CPU accessible. + * + * This will be always be <= @probed_size, and the + * remainder (if there is any) will not be CPU + * accessible. + * + * On systems without small BAR, the @probed_size will + * always equal the @probed_cpu_visible_size, since all + * of it will be CPU accessible. + * + * Note this is only tracked for + * I915_MEMORY_CLASS_DEVICE regions (for other types the + * value here will always equal the @probed_size). + * + * Note that if the value returned here is zero, then + * this must be an old kernel which lacks the relevant + * small-bar uAPI support (including + * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS), but on + * such systems we should never actually end up with a + * small BAR configuration, assuming we are able to load + * the kernel module. Hence it should be safe to treat + * this the same as when @probed_cpu_visible_size == + * @probed_size. + */ + __u64 probed_cpu_visible_size; + + /** + * @unallocated_cpu_visible_size: Estimate of CPU + * visible memory remaining. + * + * Note this is only tracked for + * I915_MEMORY_CLASS_DEVICE regions (for other types the + * value here will always equal the + * @probed_cpu_visible_size). + * + * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable + * accounting. Without this the value here will always + * equal the @probed_cpu_visible_size. Note this is only + * currently tracked for I915_MEMORY_CLASS_DEVICE + * regions (for other types the value here will also + * always equal the @probed_cpu_visible_size). + * + * If this is an older kernel the value here will be + * zero, see also @probed_cpu_visible_size. + */ + __u64 unallocated_cpu_visible_size; + }; + }; }; /** @@ -3129,14 +3468,24 @@ struct drm_i915_query_memory_regions { }; /** + * DOC: GuC HWCONFIG blob uAPI + * + * The GuC produces a blob with information about the current device. + * i915 reads this blob from GuC and makes it available via this uAPI. + * + * The format and meaning of the blob content are documented in the + * Programmer's Reference Manual. + */ + +/** * struct drm_i915_gem_create_ext - Existing gem_create behaviour, with added * extension support using struct i915_user_extension. * - * Note that in the future we want to have our buffer flags here, at least for - * the stuff that is immutable. Previously we would have two ioctls, one to - * create the object with gem_create, and another to apply various parameters, - * however this creates some ambiguity for the params which are considered - * immutable. Also in general we're phasing out the various SET/GET ioctls. + * Note that new buffer flags should be added here, at least for the stuff that + * is immutable. Previously we would have two ioctls, one to create the object + * with gem_create, and another to apply various parameters, however this + * creates some ambiguity for the params which are considered immutable. Also in + * general we're phasing out the various SET/GET ioctls. */ struct drm_i915_gem_create_ext { /** @@ -3144,21 +3493,95 @@ struct drm_i915_gem_create_ext { * * The (page-aligned) allocated size for the object will be returned. * - * Note that for some devices we have might have further minimum - * page-size restrictions(larger than 4K), like for device local-memory. - * However in general the final size here should always reflect any - * rounding up, if for example using the I915_GEM_CREATE_EXT_MEMORY_REGIONS - * extension to place the object in device local-memory. + * DG2 64K min page size implications: + * + * On discrete platforms, starting from DG2, we have to contend with GTT + * page size restrictions when dealing with I915_MEMORY_CLASS_DEVICE + * objects. Specifically the hardware only supports 64K or larger GTT + * page sizes for such memory. The kernel will already ensure that all + * I915_MEMORY_CLASS_DEVICE memory is allocated using 64K or larger page + * sizes underneath. + * + * Note that the returned size here will always reflect any required + * rounding up done by the kernel, i.e 4K will now become 64K on devices + * such as DG2. The kernel will always select the largest minimum + * page-size for the set of possible placements as the value to use when + * rounding up the @size. + * + * Special DG2 GTT address alignment requirement: + * + * The GTT alignment will also need to be at least 2M for such objects. + * + * Note that due to how the hardware implements 64K GTT page support, we + * have some further complications: + * + * 1) The entire PDE (which covers a 2MB virtual address range), must + * contain only 64K PTEs, i.e mixing 4K and 64K PTEs in the same + * PDE is forbidden by the hardware. + * + * 2) We still need to support 4K PTEs for I915_MEMORY_CLASS_SYSTEM + * objects. + * + * To keep things simple for userland, we mandate that any GTT mappings + * must be aligned to and rounded up to 2MB. The kernel will internally + * pad them out to the next 2MB boundary. As this only wastes virtual + * address space and avoids userland having to copy any needlessly + * complicated PDE sharing scheme (coloring) and only affects DG2, this + * is deemed to be a good compromise. */ __u64 size; + /** * @handle: Returned handle for the object. * * Object handles are nonzero. */ __u32 handle; - /** @flags: MBZ */ + + /** + * @flags: Optional flags. + * + * Supported values: + * + * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the kernel that + * the object will need to be accessed via the CPU. + * + * Only valid when placing objects in I915_MEMORY_CLASS_DEVICE, and only + * strictly required on configurations where some subset of the device + * memory is directly visible/mappable through the CPU (which we also + * call small BAR), like on some DG2+ systems. Note that this is quite + * undesirable, but due to various factors like the client CPU, BIOS etc + * it's something we can expect to see in the wild. See + * &drm_i915_memory_region_info.probed_cpu_visible_size for how to + * determine if this system applies. + * + * Note that one of the placements MUST be I915_MEMORY_CLASS_SYSTEM, to + * ensure the kernel can always spill the allocation to system memory, + * if the object can't be allocated in the mappable part of + * I915_MEMORY_CLASS_DEVICE. + * + * Also note that since the kernel only supports flat-CCS on objects + * that can *only* be placed in I915_MEMORY_CLASS_DEVICE, we therefore + * don't support I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS together with + * flat-CCS. + * + * Without this hint, the kernel will assume that non-mappable + * I915_MEMORY_CLASS_DEVICE is preferred for this object. Note that the + * kernel can still migrate the object to the mappable part, as a last + * resort, if userspace ever CPU faults this object, but this might be + * expensive, and so ideally should be avoided. + * + * On older kernels which lack the relevant small-bar uAPI support (see + * also &drm_i915_memory_region_info.probed_cpu_visible_size), + * usage of the flag will result in an error, but it should NEVER be + * possible to end up with a small BAR configuration, assuming we can + * also successfully load the i915 kernel module. In such cases the + * entire I915_MEMORY_CLASS_DEVICE region will be CPU accessible, and as + * such there are zero restrictions on where the object can be placed. + */ +#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0) __u32 flags; + /** * @extensions: The chain of extensions to apply to this object. * @@ -3217,6 +3640,22 @@ struct drm_i915_gem_create_ext { * At which point we get the object handle in &drm_i915_gem_create_ext.handle, * along with the final object size in &drm_i915_gem_create_ext.size, which * should account for any rounding up, if required. + * + * Note that userspace has no means of knowing the current backing region + * for objects where @num_regions is larger than one. The kernel will only + * ensure that the priority order of the @regions array is honoured, either + * when initially placing the object, or when moving memory around due to + * memory pressure + * + * On Flat-CCS capable HW, compression is supported for the objects residing + * in I915_MEMORY_CLASS_DEVICE. When such objects (compressed) have other + * memory class in @regions and migrated (by i915, due to memory + * constraints) to the non I915_MEMORY_CLASS_DEVICE region, then i915 needs to + * decompress the content. But i915 doesn't have the required information to + * decompress the userspace compressed objects. + * + * So i915 supports Flat-CCS, on the objects which can reside only on + * I915_MEMORY_CLASS_DEVICE regions. */ struct drm_i915_gem_create_ext_memory_regions { /** @base: Extension link. See struct i915_user_extension. */ diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index ba5af15e25f5..51b9aa640ad2 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -87,10 +87,35 @@ struct bpf_cgroup_storage_key { __u32 attach_type; /* program attach type (enum bpf_attach_type) */ }; +enum bpf_cgroup_iter_order { + BPF_CGROUP_ITER_ORDER_UNSPEC = 0, + BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */ + BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */ + BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */ + BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */ +}; + union bpf_iter_link_info { struct { __u32 map_fd; } map; + struct { + enum bpf_cgroup_iter_order order; + + /* At most one of cgroup_fd and cgroup_id can be non-zero. If + * both are zero, the walk starts from the default cgroup v2 + * root. For walking v1 hierarchy, one should always explicitly + * specify cgroup_fd. + */ + __u32 cgroup_fd; + __u64 cgroup_id; + } cgroup; + /* Parameters of task iterators. */ + struct { + __u32 tid; + __u32 pid; + __u32 pid_fd; + } task; }; /* BPF syscall commands, see bpf(2) man-page for more details. */ @@ -330,6 +355,8 @@ union bpf_iter_link_info { * *ctx_out*, *data_in* and *data_out* must be NULL. * *repeat* must be zero. * + * BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN. + * * Return * Returns zero on success. On error, -1 is returned and *errno* * is set appropriately. @@ -907,6 +934,7 @@ enum bpf_map_type { BPF_MAP_TYPE_INODE_STORAGE, BPF_MAP_TYPE_TASK_STORAGE, BPF_MAP_TYPE_BLOOM_FILTER, + BPF_MAP_TYPE_USER_RINGBUF, }; /* Note that tracing related programs such as @@ -995,6 +1023,8 @@ enum bpf_attach_type { BPF_SK_REUSEPORT_SELECT, BPF_SK_REUSEPORT_SELECT_OR_MIGRATE, BPF_PERF_EVENT, + BPF_TRACE_KPROBE_MULTI, + BPF_LSM_CGROUP, __MAX_BPF_ATTACH_TYPE }; @@ -1009,6 +1039,8 @@ enum bpf_link_type { BPF_LINK_TYPE_NETNS = 5, BPF_LINK_TYPE_XDP = 6, BPF_LINK_TYPE_PERF_EVENT = 7, + BPF_LINK_TYPE_KPROBE_MULTI = 8, + BPF_LINK_TYPE_STRUCT_OPS = 9, MAX_BPF_LINK_TYPE, }; @@ -1111,6 +1143,16 @@ enum bpf_link_type { */ #define BPF_F_SLEEPABLE (1U << 4) +/* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program + * fully support xdp frags. + */ +#define BPF_F_XDP_HAS_FRAGS (1U << 5) + +/* link_create.kprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_KPROBE_MULTI attach type to create return probe. + */ +#define BPF_F_KPROBE_MULTI_RETURN (1U << 0) + /* When BPF ldimm64's insn[0].src_reg != 0 then this can have * the following extensions: * @@ -1217,7 +1259,7 @@ enum { /* Query effective (directly attached + inherited from ancestor cgroups) * programs that will be executed for events within a cgroup. - * attach_flags with this flag are returned only for directly attached programs. + * attach_flags with this flag are always returned 0. */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) @@ -1225,6 +1267,8 @@ enum { /* If set, run the test on the cpu specified by bpf_attr.test.cpu */ #define BPF_F_TEST_RUN_ON_CPU (1U << 0) +/* If set, XDP frames will be transmitted after processing */ +#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { @@ -1342,8 +1386,10 @@ union bpf_attr { /* or valid module BTF object fd or 0 to attach to vmlinux */ __u32 attach_btf_obj_fd; }; - __u32 :32; /* pad */ + __u32 core_relo_cnt; /* number of bpf_core_relo */ __aligned_u64 fd_array; /* array of FDs */ + __aligned_u64 core_relos; + __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ }; struct { /* anonymous struct used by BPF_OBJ_* commands */ @@ -1384,6 +1430,7 @@ union bpf_attr { __aligned_u64 ctx_out; __u32 flags; __u32 cpu; + __u32 batch_size; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ @@ -1411,6 +1458,10 @@ union bpf_attr { __u32 attach_flags; __aligned_u64 prog_ids; __u32 prog_cnt; + /* output: per-program attach_flags. + * not allowed to be set during effective query. + */ + __aligned_u64 prog_attach_flags; } query; struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ @@ -1463,6 +1514,22 @@ union bpf_attr { */ __u64 bpf_cookie; } perf_event; + struct { + __u32 flags; + __u32 cnt; + __aligned_u64 syms; + __aligned_u64 addrs; + __aligned_u64 cookies; + } kprobe_multi; + struct { + /* this is overlaid with the target_btf_id above. */ + __u32 target_btf_id; + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 cookie; + } tracing; }; } link_create; @@ -1744,7 +1811,7 @@ union bpf_attr { * if the maximum number of tail calls has been reached for this * chain of programs. This limit is defined in the kernel by the * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), - * which is currently set to 32. + * which is currently set to 33. * Return * 0 on success, or a negative error in case of failure. * @@ -1773,6 +1840,8 @@ union bpf_attr { * 0 on success, or a negative error in case of failure. * * u64 bpf_get_current_pid_tgid(void) + * Description + * Get the current pid and tgid. * Return * A 64-bit integer containing the current tgid and pid, and * created as such: @@ -1780,6 +1849,8 @@ union bpf_attr { * *current_task*\ **->pid**. * * u64 bpf_get_current_uid_gid(void) + * Description + * Get the current uid and gid. * Return * A 64-bit integer containing the current GID and UID, and * created as such: *current_gid* **<< 32 \|** *current_uid*. @@ -2254,6 +2325,8 @@ union bpf_attr { * The 32-bit hash. * * u64 bpf_get_current_task(void) + * Description + * Get the current task. * Return * A pointer to the current task struct. * @@ -2284,8 +2357,8 @@ union bpf_attr { * Return * The return value depends on the result of the test, and can be: * - * * 0, if current task belongs to the cgroup2. - * * 1, if current task does not belong to the cgroup2. + * * 1, if current task belongs to the cgroup2. + * * 0, if current task does not belong to the cgroup2. * * A negative error code, if an error occurred. * * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) @@ -2317,7 +2390,8 @@ union bpf_attr { * Pull in non-linear data in case the *skb* is non-linear and not * all of *len* are part of the linear section. Make *len* bytes * from *skb* readable and writable. If a zero value is passed for - * *len*, then the whole length of the *skb* is pulled. + * *len*, then all bytes in the linear part of *skb* will be made + * readable and writable. * * This helper is only needed for reading and writing with direct * packet access. @@ -2367,6 +2441,8 @@ union bpf_attr { * indicate that the hash is outdated and to trigger a * recalculation the next time the kernel tries to access this * hash or when the **bpf_get_hash_recalc**\ () helper is called. + * Return + * void. * * long bpf_get_numa_node_id(void) * Description @@ -2464,6 +2540,8 @@ union bpf_attr { * A 8-byte long unique number or 0 if *sk* is NULL. * * u32 bpf_get_socket_uid(struct sk_buff *skb) + * Description + * Get the owner UID of the socked associated to *skb*. * Return * The owner UID of the socket associated to *skb*. If the socket * is **NULL**, or if it is not a full socket (i.e. if it is a @@ -2524,10 +2602,12 @@ union bpf_attr { * There are two supported modes at this time: * * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer - * (room space is added or removed below the layer 2 header). + * (room space is added or removed between the layer 2 and + * layer 3 headers). * * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer - * (room space is added or removed below the layer 3 header). + * (room space is added or removed between the layer 3 and + * layer 4 headers). * * The following flags are supported at this time: * @@ -2959,8 +3039,18 @@ union bpf_attr { * **BPF_F_USER_STACK** * Collect a user space stack instead of a kernel stack. * **BPF_F_USER_BUILD_ID** - * Collect buildid+offset instead of ips for user stack, - * only valid if **BPF_F_USER_STACK** is also specified. + * Collect (build_id, file_offset) instead of ips for user + * stack, only valid if **BPF_F_USER_STACK** is also + * specified. + * + * *file_offset* is an offset relative to the beginning + * of the executable or shared object file backing the vma + * which the *ip* falls in. It is *not* an offset relative + * to that object's base address. Accordingly, it must be + * adjusted by adding (sh_addr - sh_offset), where + * sh_{addr,offset} correspond to the executable section + * containing *file_offset* in the object, for comparisons + * to symbols' st_value to be valid. * * **bpf_get_stack**\ () can collect up to * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject @@ -2973,8 +3063,8 @@ union bpf_attr { * * # sysctl kernel.perf_event_max_stack=<new value> * Return - * A non-negative value equal to or less than *size* on success, - * or a negative error in case of failure. + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. * * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) * Description @@ -3238,6 +3328,9 @@ union bpf_attr { * The id is returned or 0 in case the id could not be retrieved. * * u64 bpf_get_current_cgroup_id(void) + * Description + * Get the current cgroup id based on the cgroup within which + * the current task is running. * Return * A 64-bit integer containing the current cgroup id based * on the cgroup within which the current task is running. @@ -3548,10 +3641,11 @@ union bpf_attr { * * *iph* points to the start of the IPv4 or IPv6 header, while * *iph_len* contains **sizeof**\ (**struct iphdr**) or - * **sizeof**\ (**struct ip6hdr**). + * **sizeof**\ (**struct ipv6hdr**). * * *th* points to the start of the TCP header, while *th_len* - * contains **sizeof**\ (**struct tcphdr**). + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). * Return * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative * error otherwise. @@ -3734,10 +3828,11 @@ union bpf_attr { * * *iph* points to the start of the IPv4 or IPv6 header, while * *iph_len* contains **sizeof**\ (**struct iphdr**) or - * **sizeof**\ (**struct ip6hdr**). + * **sizeof**\ (**struct ipv6hdr**). * * *th* points to the start of the TCP header, while *th_len* - * contains the length of the TCP header. + * contains the length of the TCP header with options (at least + * **sizeof**\ (**struct tcphdr**)). * Return * On success, lower 32 bits hold the generated SYN cookie in * followed by 16 bits which hold the MSS value for that cookie, @@ -4277,8 +4372,8 @@ union bpf_attr { * * # sysctl kernel.perf_event_max_stack=<new value> * Return - * A non-negative value equal to or less than *size* on success, - * or a negative error in case of failure. + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. * * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) * Description @@ -4371,7 +4466,7 @@ union bpf_attr { * * **-EEXIST** if the option already exists. * - * **-EFAULT** on failrue to parse the existing header options. + * **-EFAULT** on failure to parse the existing header options. * * **-EPERM** if the helper cannot be used under the current * *skops*\ **->op**. @@ -4580,7 +4675,7 @@ union bpf_attr { * a *map* with *task* as the **key**. From this * perspective, the usage is not much different from * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this - * helper enforces the key must be an task_struct and the map must also + * helper enforces the key must be a task_struct and the map must also * be a **BPF_MAP_TYPE_TASK_STORAGE**. * * Underneath, the value is stored locally at *task* instead of @@ -4638,7 +4733,7 @@ union bpf_attr { * * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) * Description - * Returns the stored IMA hash of the *inode* (if it's avaialable). + * Returns the stored IMA hash of the *inode* (if it's available). * If the hash is larger than *size*, then only *size* * bytes will be copied to *dst* * Return @@ -4662,12 +4757,12 @@ union bpf_attr { * * The argument *len_diff* can be used for querying with a planned * size change. This allows to check MTU prior to changing packet - * ctx. Providing an *len_diff* adjustment that is larger than the + * ctx. Providing a *len_diff* adjustment that is larger than the * actual packet size (resulting in negative packet size) will in - * principle not exceed the MTU, why it is not considered a - * failure. Other BPF-helpers are needed for performing the - * planned size change, why the responsability for catch a negative - * packet size belong in those helpers. + * principle not exceed the MTU, which is why it is not considered + * a failure. Other BPF helpers are needed for performing the + * planned size change; therefore the responsibility for catching + * a negative packet size belongs in those helpers. * * Specifying *ifindex* zero means the MTU check is performed * against the current net device. This is practical if this isn't @@ -4865,6 +4960,7 @@ union bpf_attr { * Get address of the traced function (for tracing and kprobe programs). * Return * Address of the traced function. + * 0 for kprobes placed within the function (not at the entry). * * u64 bpf_get_attach_cookie(void *ctx) * Description @@ -4938,6 +5034,407 @@ union bpf_attr { * **-ENOENT** if symbol is not found. * * **-EPERM** if caller does not have permission to obtain kernel address. + * + * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * Find vma of *task* that contains *addr*, call *callback_fn* + * function with *task*, *vma*, and *callback_ctx*. + * The *callback_fn* should be a static function and + * the *callback_ctx* should be a pointer to the stack. + * The *flags* is used to control certain aspects of the helper. + * Currently, the *flags* must be 0. + * + * The expected callback signature is + * + * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); + * + * Return + * 0 on success. + * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. + * **-EBUSY** if failed to try lock mmap_lock. + * **-EINVAL** for invalid **flags**. + * + * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For **nr_loops**, call **callback_fn** function + * with **callback_ctx** as the context parameter. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. Currently, nr_loops is + * limited to 1 << 23 (~8 million) loops. + * + * long (\*callback_fn)(u32 index, void \*ctx); + * + * where **index** is the current index in the loop. The index + * is zero-indexed. + * + * If **callback_fn** returns 0, the helper will continue to the next + * loop. If return value is 1, the helper will skip the rest of + * the loops and return. Other return values are not used now, + * and will be rejected by the verifier. + * + * Return + * The number of loops performed, **-EINVAL** for invalid **flags**, + * **-E2BIG** if **nr_loops** exceeds the maximum number of loops. + * + * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) + * Description + * Do strncmp() between **s1** and **s2**. **s1** doesn't need + * to be null-terminated and **s1_sz** is the maximum storage + * size of **s1**. **s2** must be a read-only string. + * Return + * An integer less than, equal to, or greater than zero + * if the first **s1_sz** bytes of **s1** is found to be + * less than, to match, or be greater than **s2**. + * + * long bpf_get_func_arg(void *ctx, u32 n, u64 *value) + * Description + * Get **n**-th argument register (zero based) of the traced function (for tracing programs) + * returned in **value**. + * + * Return + * 0 on success. + * **-EINVAL** if n >= argument register count of traced function. + * + * long bpf_get_func_ret(void *ctx, u64 *value) + * Description + * Get return value of the traced function (for tracing programs) + * in **value**. + * + * Return + * 0 on success. + * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. + * + * long bpf_get_func_arg_cnt(void *ctx) + * Description + * Get number of registers of the traced function (for tracing programs) where + * function arguments are stored in these registers. + * + * Return + * The number of argument registers of the traced function. + * + * int bpf_get_retval(void) + * Description + * Get the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * Return + * The BPF program's return value. + * + * int bpf_set_retval(int retval) + * Description + * Set the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * + * Note that there is the following corner case where the program exports an error + * via bpf_set_retval but signals success via 'return 1': + * + * bpf_set_retval(-EPERM); + * return 1; + * + * In this case, the BPF program's return value will use helper's -EPERM. This + * still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case. + * + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md) + * Description + * Get the total size of a given xdp buff (linear and paged area) + * Return + * The total size of a given xdp buffer. + * + * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * This helper is provided as an easy way to load data from a + * xdp buffer. It can be used to load *len* bytes from *offset* from + * the frame associated to *xdp_md*, into the buffer pointed by + * *buf*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * Store *len* bytes from buffer *buf* into the frame + * associated to *xdp_md*, at *offset*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags) + * Description + * Read *size* bytes from user space address *user_ptr* in *tsk*'s + * address space, and stores the data in *dst*. *flags* is not + * used yet and is provided for future extensibility. This helper + * can only be used by sleepable programs. + * Return + * 0 on success, or a negative error in case of failure. On error + * *dst* buffer is zeroed out. + * + * long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type) + * Description + * Change the __sk_buff->tstamp_type to *tstamp_type* + * and set *tstamp* to the __sk_buff->tstamp together. + * + * If there is no need to change the __sk_buff->tstamp_type, + * the tstamp value can be directly written to __sk_buff->tstamp + * instead. + * + * BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that + * will be kept during bpf_redirect_*(). A non zero + * *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO + * *tstamp_type*. + * + * A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used + * with a zero *tstamp*. + * + * Only IPv4 and IPv6 skb->protocol are supported. + * + * This function is most useful when it needs to set a + * mono delivery time to __sk_buff->tstamp and then + * bpf_redirect_*() to the egress of an iface. For example, + * changing the (rcv) timestamp in __sk_buff->tstamp at + * ingress to a mono delivery time and then bpf_redirect_*() + * to sch_fq@phy-dev. + * Return + * 0 on success. + * **-EINVAL** for invalid input + * **-EOPNOTSUPP** for unsupported protocol + * + * long bpf_ima_file_hash(struct file *file, void *dst, u32 size) + * Description + * Returns a calculated IMA hash of the *file*. + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if + * invalid arguments are passed. + * + * void *bpf_kptr_xchg(void *map_value, void *ptr) + * Description + * Exchange kptr at pointer *map_value* with *ptr*, and return the + * old value. *ptr* can be NULL, otherwise it must be a referenced + * pointer which will be released when this helper is called. + * Return + * The old value of kptr (which can be NULL). The returned pointer + * if not NULL, is a reference which must be released using its + * corresponding release function, or moved into a BPF map before + * program exit. + * + * void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) + * Description + * Perform a lookup in *percpu map* for an entry associated to + * *key* on *cpu*. + * Return + * Map value associated to *key* on *cpu*, or **NULL** if no entry + * was found or *cpu* is invalid. + * + * struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Get a dynptr to local memory *data*. + * + * *data* must be a ptr to a map value. + * The maximum *size* supported is DYNPTR_MAX_SIZE. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE, + * -EINVAL if flags is not 0. + * + * long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf* + * through the dynptr interface. *flags* must be 0. + * + * Please note that a corresponding bpf_ringbuf_submit_dynptr or + * bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the + * reservation fails. This is enforced by the verifier. + * Return + * 0 on success, or a negative error in case of failure. + * + * void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*, + * through the dynptr interface. This is a no-op if the dynptr is + * invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_submit'. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Discard reserved ring buffer sample through the dynptr + * interface. This is a no-op if the dynptr is invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_discard'. + * Return + * Nothing. Always succeeds. + * + * long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset, u64 flags) + * Description + * Read *len* bytes from *src* into *dst*, starting from *offset* + * into *src*. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *src*'s data, -EINVAL if *src* is an invalid dynptr or if + * *flags* is not 0. + * + * long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len, u64 flags) + * Description + * Write *len* bytes from *src* into *dst*, starting from *offset* + * into *dst*. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* + * is a read-only dynptr or if *flags* is not 0. + * + * void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len) + * Description + * Get a pointer to the underlying dynptr data. + * + * *len* must be a statically known value. The returned data slice + * is invalidated whenever the dynptr is invalidated. + * Return + * Pointer to the underlying dynptr data, NULL if the dynptr is + * read-only, if the dynptr is invalid, or if the offset and length + * is out of bounds. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv4/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv6/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * u64 bpf_ktime_get_tai_ns(void) + * Description + * A nonsettable system-wide clock derived from wall-clock time but + * ignoring leap seconds. This clock does not experience + * discontinuities and backwards jumps caused by NTP inserting leap + * seconds as CLOCK_REALTIME does. + * + * See: **clock_gettime**\ (**CLOCK_TAI**) + * Return + * Current *ktime*. + * + * long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags) + * Description + * Drain samples from the specified user ring buffer, and invoke + * the provided callback for each such sample: + * + * long (\*callback_fn)(struct bpf_dynptr \*dynptr, void \*ctx); + * + * If **callback_fn** returns 0, the helper will continue to try + * and drain the next sample, up to a maximum of + * BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1, + * the helper will skip the rest of the samples and return. Other + * return values are not used now, and will be rejected by the + * verifier. + * Return + * The number of drained samples if no error was encountered while + * draining samples, or 0 if no samples were present in the ring + * buffer. If a user-space producer was epoll-waiting on this map, + * and at least one sample was drained, they will receive an event + * notification notifying them of available space in the ring + * buffer. If the BPF_RB_NO_WAKEUP flag is passed to this + * function, no wakeup notification will be sent. If the + * BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will + * be sent even if no sample was drained. + * + * On failure, the returned value is one of the following: + * + * **-EBUSY** if the ring buffer is contended, and another calling + * context was concurrently draining the ring buffer. + * + * **-EINVAL** if user-space is not properly tracking the ring + * buffer due to the producer position not being aligned to 8 + * bytes, a sample not being aligned to 8 bytes, or the producer + * position not matching the advertised length of a sample. + * + * **-E2BIG** if user-space has tried to publish a sample which is + * larger than the size of the ring buffer, or which cannot fit + * within a struct bpf_dynptr. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5120,6 +5617,36 @@ union bpf_attr { FN(trace_vprintk), \ FN(skc_to_unix_sock), \ FN(kallsyms_lookup_name), \ + FN(find_vma), \ + FN(loop), \ + FN(strncmp), \ + FN(get_func_arg), \ + FN(get_func_ret), \ + FN(get_func_arg_cnt), \ + FN(get_retval), \ + FN(set_retval), \ + FN(xdp_get_buff_len), \ + FN(xdp_load_bytes), \ + FN(xdp_store_bytes), \ + FN(copy_from_user_task), \ + FN(skb_set_tstamp), \ + FN(ima_file_hash), \ + FN(kptr_xchg), \ + FN(map_lookup_percpu_elem), \ + FN(skc_to_mptcp_sock), \ + FN(dynptr_from_mem), \ + FN(ringbuf_reserve_dynptr), \ + FN(ringbuf_submit_dynptr), \ + FN(ringbuf_discard_dynptr), \ + FN(dynptr_read), \ + FN(dynptr_write), \ + FN(dynptr_data), \ + FN(tcp_raw_gen_syncookie_ipv4), \ + FN(tcp_raw_gen_syncookie_ipv6), \ + FN(tcp_raw_check_syncookie_ipv4), \ + FN(tcp_raw_check_syncookie_ipv6), \ + FN(ktime_get_tai_ns), \ + FN(user_ringbuf_drain), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -5182,6 +5709,11 @@ enum { BPF_F_SEQ_NUMBER = (1ULL << 3), }; +/* BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_FLAGS = (1ULL << 4), +}; + /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and * BPF_FUNC_perf_event_read_value flags. */ @@ -5309,6 +5841,15 @@ union { \ __u64 :64; \ } __attribute__((aligned(8))) +enum { + BPF_SKB_TSTAMP_UNSPEC, + BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */ + /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle, + * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC + * and try to deduce it by ingress, egress or skb->sk->sk_clockid. + */ +}; + /* user accessible mirror of in-kernel sk_buff. * new fields can only be added to the end of this structure */ @@ -5349,7 +5890,8 @@ struct __sk_buff { __u32 gso_segs; __bpf_md_ptr(struct bpf_sock *, sk); __u32 gso_size; - __u32 :32; /* Padding, future use. */ + __u8 tstamp_type; + __u32 :24; /* Padding, future use. */ __u64 hwtstamp; }; @@ -5361,8 +5903,15 @@ struct bpf_tunnel_key { }; __u8 tunnel_tos; __u8 tunnel_ttl; - __u16 tunnel_ext; /* Padding, future use. */ + union { + __u16 tunnel_ext; /* compat */ + __be16 tunnel_flags; + }; __u32 tunnel_label; + union { + __u32 local_ipv4; + __u32 local_ipv6[4]; + }; }; /* user accessible mirror of in-kernel xfrm_state. @@ -5401,6 +5950,11 @@ enum bpf_ret_code { * represented by BPF_REDIRECT above). */ BPF_LWT_REROUTE = 128, + /* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR + * to indicate that no custom dissection was performed, and + * fallback to standard dissector is requested. + */ + BPF_FLOW_DISSECTOR_CONTINUE = 129, }; struct bpf_sock { @@ -5414,7 +5968,8 @@ struct bpf_sock { __u32 src_ip4; __u32 src_ip6[4]; __u32 src_port; /* host byte order */ - __u32 dst_port; /* network byte order */ + __be16 dst_port; /* network byte order */ + __u16 :16; /* zero padding */ __u32 dst_ip4; __u32 dst_ip6[4]; __u32 state; @@ -5645,6 +6200,8 @@ struct bpf_prog_info { __u64 run_cnt; __u64 recursion_misses; __u32 verified_insns; + __u32 attach_btf_obj_id; + __u32 attach_btf_id; } __attribute__((aligned(8))); struct bpf_map_info { @@ -5696,11 +6253,26 @@ struct bpf_link_info { struct { __aligned_u64 target_name; /* in/out: target_name buffer ptr */ __u32 target_name_len; /* in/out: target_name buffer len */ + + /* If the iter specific field is 32 bits, it can be put + * in the first or second union. Otherwise it should be + * put in the second union. + */ union { struct { __u32 map_id; } map; }; + union { + struct { + __u64 cgroup_id; + __u32 order; + } cgroup; + struct { + __u32 tid; + __u32 pid; + } task; + }; } iter; struct { __u32 netns_ino; @@ -6256,6 +6828,11 @@ struct bpf_timer { __u64 :64; } __attribute__((aligned(8))); +struct bpf_dynptr { + __u64 :64; + __u64 :64; +} __attribute__((aligned(8))); + struct bpf_sysctl { __u32 write; /* Sysctl is being read (= 0) or written (= 1). * Allows 1,2,4-byte read, but no write. @@ -6292,10 +6869,12 @@ struct bpf_sk_lookup { __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ __u32 remote_ip4; /* Network byte order */ __u32 remote_ip6[4]; /* Network byte order */ - __u32 remote_port; /* Network byte order */ + __be16 remote_port; /* Network byte order */ + __u16 :16; /* Zero padding */ __u32 local_ip4; /* Network byte order */ __u32 local_ip6[4]; /* Network byte order */ __u32 local_port; /* Host byte order */ + __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ }; /* @@ -6328,4 +6907,79 @@ enum { BTF_F_ZERO = (1ULL << 3), }; +/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value + * has to be adjusted by relocations. It is emitted by llvm and passed to + * libbpf and later to the kernel. + */ +enum bpf_core_relo_kind { + BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ + BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ + BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ + BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ + BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ + BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ + BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ + BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ + BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ + BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ + BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ + BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ + BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */ +}; + +/* + * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf + * and from libbpf to the kernel. + * + * CO-RE relocation captures the following data: + * - insn_off - instruction offset (in bytes) within a BPF program that needs + * its insn->imm field to be relocated with actual field info; + * - type_id - BTF type ID of the "root" (containing) entity of a relocatable + * type or field; + * - access_str_off - offset into corresponding .BTF string section. String + * interpretation depends on specific relocation kind: + * - for field-based relocations, string encodes an accessed field using + * a sequence of field and array indices, separated by colon (:). It's + * conceptually very close to LLVM's getelementptr ([0]) instruction's + * arguments for identifying offset to a field. + * - for type-based relocations, strings is expected to be just "0"; + * - for enum value-based relocations, string contains an index of enum + * value within its enum type; + * - kind - one of enum bpf_core_relo_kind; + * + * Example: + * struct sample { + * int a; + * struct { + * int b[10]; + * }; + * }; + * + * struct sample *s = ...; + * int *x = &s->a; // encoded as "0:0" (a is field #0) + * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, + * // b is field #0 inside anon struct, accessing elem #5) + * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) + * + * type_id for all relocs in this example will capture BTF type id of + * `struct sample`. + * + * Such relocation is emitted when using __builtin_preserve_access_index() + * Clang built-in, passing expression that captures field address, e.g.: + * + * bpf_probe_read(&dst, sizeof(dst), + * __builtin_preserve_access_index(&src->a.b.c)); + * + * In this case Clang will emit field relocation recording necessary data to + * be able to find offset of embedded `a.b.c` field within `src` struct. + * + * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction + */ +struct bpf_core_relo { + __u32 insn_off; + __u32 type_id; + __u32 access_str_off; + enum bpf_core_relo_kind kind; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h index deb12f755f0f..ec1798b6d3ff 100644 --- a/tools/include/uapi/linux/btf.h +++ b/tools/include/uapi/linux/btf.h @@ -33,17 +33,17 @@ struct btf_type { /* "info" bits arrangement * bits 0-15: vlen (e.g. # of struct's members) * bits 16-23: unused - * bits 24-27: kind (e.g. int, ptr, array...etc) - * bits 28-30: unused + * bits 24-28: kind (e.g. int, ptr, array...etc) + * bits 29-30: unused * bit 31: kind_flag, currently used by - * struct, union and fwd + * struct, union, enum, fwd and enum64 */ __u32 info; - /* "size" is used by INT, ENUM, STRUCT, UNION and DATASEC. + /* "size" is used by INT, ENUM, STRUCT, UNION, DATASEC and ENUM64. * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC, FUNC_PROTO, VAR and DECL_TAG. + * FUNC, FUNC_PROTO, VAR, DECL_TAG and TYPE_TAG. * "type" is a type_id referring to another type. */ union { @@ -63,7 +63,7 @@ enum { BTF_KIND_ARRAY = 3, /* Array */ BTF_KIND_STRUCT = 4, /* Struct */ BTF_KIND_UNION = 5, /* Union */ - BTF_KIND_ENUM = 6, /* Enumeration */ + BTF_KIND_ENUM = 6, /* Enumeration up to 32-bit values */ BTF_KIND_FWD = 7, /* Forward */ BTF_KIND_TYPEDEF = 8, /* Typedef */ BTF_KIND_VOLATILE = 9, /* Volatile */ @@ -75,6 +75,8 @@ enum { BTF_KIND_DATASEC = 15, /* Section */ BTF_KIND_FLOAT = 16, /* Floating point */ BTF_KIND_DECL_TAG = 17, /* Decl Tag */ + BTF_KIND_TYPE_TAG = 18, /* Type Tag */ + BTF_KIND_ENUM64 = 19, /* Enumeration up to 64-bit values */ NR_BTF_KINDS, BTF_KIND_MAX = NR_BTF_KINDS - 1, @@ -185,4 +187,14 @@ struct btf_decl_tag { __s32 component_idx; }; +/* BTF_KIND_ENUM64 is followed by multiple "struct btf_enum64". + * The exact number of btf_enum64 is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_enum64 { + __u32 name_off; + __u32 val_lo32; + __u32 val_hi32; +}; + #endif /* _UAPI__LINUX_BTF_H__ */ diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h index bdf7b404b3e7..b7b56871029c 100644 --- a/tools/include/uapi/linux/fs.h +++ b/tools/include/uapi/linux/fs.h @@ -90,7 +90,7 @@ struct file_dedupe_range { __u16 dest_count; /* in - total elements in info array */ __u16 reserved1; /* must be zero */ __u32 reserved2; /* must be zero */ - struct file_dedupe_range_info info[0]; + struct file_dedupe_range_info info[]; }; /* And dynamically-tunable limits and defaults: */ diff --git a/tools/include/uapi/linux/fscrypt.h b/tools/include/uapi/linux/fscrypt.h index 9f4428be3e36..a756b29afcc2 100644 --- a/tools/include/uapi/linux/fscrypt.h +++ b/tools/include/uapi/linux/fscrypt.h @@ -27,7 +27,8 @@ #define FSCRYPT_MODE_AES_128_CBC 5 #define FSCRYPT_MODE_AES_128_CTS 6 #define FSCRYPT_MODE_ADIANTUM 9 -/* If adding a mode number > 9, update FSCRYPT_MODE_MAX in fscrypt_private.h */ +#define FSCRYPT_MODE_AES_256_HCTR2 10 +/* If adding a mode number > 10, update FSCRYPT_MODE_MAX in fscrypt_private.h */ /* * Legacy policy version; ad-hoc KDF and no key verification. diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h index eebd3894fe89..0242f31e339c 100644 --- a/tools/include/uapi/linux/if_link.h +++ b/tools/include/uapi/linux/if_link.h @@ -347,6 +347,9 @@ enum { */ IFLA_PARENT_DEV_NAME, IFLA_PARENT_DEV_BUS_NAME, + IFLA_GRO_MAX_SIZE, + IFLA_TSO_MAX_SIZE, + IFLA_TSO_MAX_SEGS, __IFLA_MAX }; @@ -858,6 +861,8 @@ enum { IFLA_BOND_TLB_DYNAMIC_LB, IFLA_BOND_PEER_NOTIF_DELAY, IFLA_BOND_AD_LACP_ACTIVE, + IFLA_BOND_MISSED_MAX, + IFLA_BOND_NS_IP6_TARGET, __IFLA_BOND_MAX, }; @@ -885,6 +890,7 @@ enum { IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, + IFLA_BOND_SLAVE_PRIO, __IFLA_BOND_SLAVE_MAX, }; diff --git a/tools/include/uapi/linux/if_tun.h b/tools/include/uapi/linux/if_tun.h index 454ae31b93c7..2ec07de1d73b 100644 --- a/tools/include/uapi/linux/if_tun.h +++ b/tools/include/uapi/linux/if_tun.h @@ -108,7 +108,7 @@ struct tun_pi { struct tun_filter { __u16 flags; /* TUN_FLT_ flags see above */ __u16 count; /* Number of addresses */ - __u8 addr[0][ETH_ALEN]; + __u8 addr[][ETH_ALEN]; }; #endif /* _UAPI__IF_TUN_H */ diff --git a/tools/include/uapi/linux/in.h b/tools/include/uapi/linux/in.h index 14168225cecd..07a4cb149305 100644 --- a/tools/include/uapi/linux/in.h +++ b/tools/include/uapi/linux/in.h @@ -20,6 +20,7 @@ #define _UAPI_LINUX_IN_H #include <linux/types.h> +#include <linux/stddef.h> #include <linux/libc-compat.h> #include <linux/socket.h> @@ -68,6 +69,8 @@ enum { #define IPPROTO_PIM IPPROTO_PIM IPPROTO_COMP = 108, /* Compression Header Protocol */ #define IPPROTO_COMP IPPROTO_COMP + IPPROTO_L2TP = 115, /* Layer 2 Tunnelling Protocol */ +#define IPPROTO_L2TP IPPROTO_L2TP IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ #define IPPROTO_SCTP IPPROTO_SCTP IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ @@ -188,21 +191,13 @@ struct ip_mreq_source { }; struct ip_msfilter { + __be32 imsf_multiaddr; + __be32 imsf_interface; + __u32 imsf_fmode; + __u32 imsf_numsrc; union { - struct { - __be32 imsf_multiaddr_aux; - __be32 imsf_interface_aux; - __u32 imsf_fmode_aux; - __u32 imsf_numsrc_aux; - __be32 imsf_slist[1]; - }; - struct { - __be32 imsf_multiaddr; - __be32 imsf_interface; - __u32 imsf_fmode; - __u32 imsf_numsrc; - __be32 imsf_slist_flex[]; - }; + __be32 imsf_slist[1]; + __DECLARE_FLEX_ARRAY(__be32, imsf_slist_flex); }; }; diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 1daa45268de2..0d5d4419139a 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -270,6 +270,8 @@ struct kvm_xen_exit { #define KVM_EXIT_X86_BUS_LOCK 33 #define KVM_EXIT_XEN 34 #define KVM_EXIT_RISCV_SBI 35 +#define KVM_EXIT_RISCV_CSR 36 +#define KVM_EXIT_NOTIFY 37 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -444,8 +446,17 @@ struct kvm_run { #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4 +#define KVM_SYSTEM_EVENT_SUSPEND 5 +#define KVM_SYSTEM_EVENT_SEV_TERM 6 __u32 type; - __u64 flags; + __u32 ndata; + union { +#ifndef __KERNEL__ + __u64 flags; +#endif + __u64 data[16]; + }; } system_event; /* KVM_EXIT_S390_STSI */ struct { @@ -487,6 +498,18 @@ struct kvm_run { unsigned long args[6]; unsigned long ret[2]; } riscv_sbi; + /* KVM_EXIT_RISCV_CSR */ + struct { + unsigned long csr_num; + unsigned long new_value; + unsigned long write_mask; + unsigned long ret_value; + } riscv_csr; + /* KVM_EXIT_NOTIFY */ + struct { +#define KVM_NOTIFY_CONTEXT_INVALID (1 << 0) + __u32 flags; + } notify; /* Fix the size of the union. */ char padding[256]; }; @@ -533,7 +556,7 @@ struct kvm_coalesced_mmio { struct kvm_coalesced_mmio_ring { __u32 first, last; - struct kvm_coalesced_mmio coalesced_mmio[0]; + struct kvm_coalesced_mmio coalesced_mmio[]; }; #define KVM_COALESCED_MMIO_MAX \ @@ -562,9 +585,12 @@ struct kvm_s390_mem_op { __u32 op; /* type of operation */ __u64 buf; /* buffer in userspace */ union { - __u8 ar; /* the access register number */ + struct { + __u8 ar; /* the access register number */ + __u8 key; /* access key, ignored if flag unset */ + }; __u32 sida_offset; /* offset into the sida */ - __u8 reserved[32]; /* should be set to 0 */ + __u8 reserved[32]; /* ignored */ }; }; /* types for kvm_s390_mem_op->op */ @@ -572,9 +598,12 @@ struct kvm_s390_mem_op { #define KVM_S390_MEMOP_LOGICAL_WRITE 1 #define KVM_S390_MEMOP_SIDA_READ 2 #define KVM_S390_MEMOP_SIDA_WRITE 3 +#define KVM_S390_MEMOP_ABSOLUTE_READ 4 +#define KVM_S390_MEMOP_ABSOLUTE_WRITE 5 /* flags for kvm_s390_mem_op->flags */ #define KVM_S390_MEMOP_F_CHECK_ONLY (1ULL << 0) #define KVM_S390_MEMOP_F_INJECT_EXCEPTION (1ULL << 1) +#define KVM_S390_MEMOP_F_SKEY_PROTECTION (1ULL << 2) /* for KVM_INTERRUPT */ struct kvm_interrupt { @@ -606,7 +635,7 @@ struct kvm_clear_dirty_log { /* for KVM_SET_SIGNAL_MASK */ struct kvm_signal_mask { __u32 len; - __u8 sigset[0]; + __u8 sigset[]; }; /* for KVM_TPR_ACCESS_REPORTING */ @@ -634,6 +663,7 @@ struct kvm_vapic_addr { #define KVM_MP_STATE_OPERATING 7 #define KVM_MP_STATE_LOAD 8 #define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10 struct kvm_mp_state { __u32 mp_state; @@ -1131,6 +1161,23 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204 #define KVM_CAP_ARM_MTE 205 #define KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 206 +#define KVM_CAP_VM_GPA_BITS 207 +#define KVM_CAP_XSAVE2 208 +#define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_PPC_AIL_MODE_3 210 +#define KVM_CAP_S390_MEM_OP_EXTENSION 211 +#define KVM_CAP_PMU_CAPABILITY 212 +#define KVM_CAP_DISABLE_QUIRKS2 213 +#define KVM_CAP_VM_TSC_CONTROL 214 +#define KVM_CAP_SYSTEM_EVENT_DATA 215 +#define KVM_CAP_ARM_SYSTEM_SUSPEND 216 +#define KVM_CAP_S390_PROTECTED_DUMP 217 +#define KVM_CAP_X86_TRIPLE_FAULT_EVENT 218 +#define KVM_CAP_X86_NOTIFY_VMEXIT 219 +#define KVM_CAP_VM_DISABLE_NX_HUGE_PAGES 220 +#define KVM_CAP_S390_ZPCI_OP 221 +#define KVM_CAP_S390_CPU_TOPOLOGY 222 +#define KVM_CAP_DIRTY_LOG_RING_ACQ_REL 223 #ifdef KVM_CAP_IRQ_ROUTING @@ -1162,11 +1209,20 @@ struct kvm_irq_routing_hv_sint { __u32 sint; }; +struct kvm_irq_routing_xen_evtchn { + __u32 port; + __u32 vcpu; + __u32 priority; +}; + +#define KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL ((__u32)(-1)) + /* gsi routing entry types */ #define KVM_IRQ_ROUTING_IRQCHIP 1 #define KVM_IRQ_ROUTING_MSI 2 #define KVM_IRQ_ROUTING_S390_ADAPTER 3 #define KVM_IRQ_ROUTING_HV_SINT 4 +#define KVM_IRQ_ROUTING_XEN_EVTCHN 5 struct kvm_irq_routing_entry { __u32 gsi; @@ -1178,6 +1234,7 @@ struct kvm_irq_routing_entry { struct kvm_irq_routing_msi msi; struct kvm_irq_routing_s390_adapter adapter; struct kvm_irq_routing_hv_sint hv_sint; + struct kvm_irq_routing_xen_evtchn xen_evtchn; __u32 pad[8]; } u; }; @@ -1185,7 +1242,7 @@ struct kvm_irq_routing_entry { struct kvm_irq_routing { __u32 nr; __u32 flags; - struct kvm_irq_routing_entry entries[0]; + struct kvm_irq_routing_entry entries[]; }; #endif @@ -1208,6 +1265,8 @@ struct kvm_x86_mce { #define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1) #define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) +#define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) +#define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5) struct kvm_xen_hvm_config { __u32 flags; @@ -1303,7 +1362,7 @@ struct kvm_dirty_tlb { struct kvm_reg_list { __u64 n; /* number of regs */ - __u64 reg[0]; + __u64 reg[]; }; struct kvm_one_reg { @@ -1446,7 +1505,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) /* Available with KVM_CAP_PPC_GET_PVINFO */ #define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) -/* Available with KVM_CAP_TSC_CONTROL */ +/* Available with KVM_CAP_TSC_CONTROL for a vCPU, or with +* KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */ #define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) #define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) /* Available with KVM_CAP_PCI_2_3 */ @@ -1621,6 +1681,55 @@ struct kvm_s390_pv_unp { __u64 tweak; }; +enum pv_cmd_dmp_id { + KVM_PV_DUMP_INIT, + KVM_PV_DUMP_CONFIG_STOR_STATE, + KVM_PV_DUMP_COMPLETE, + KVM_PV_DUMP_CPU, +}; + +struct kvm_s390_pv_dmp { + __u64 subcmd; + __u64 buff_addr; + __u64 buff_len; + __u64 gaddr; /* For dump storage state */ + __u64 reserved[4]; +}; + +enum pv_cmd_info_id { + KVM_PV_INFO_VM, + KVM_PV_INFO_DUMP, +}; + +struct kvm_s390_pv_info_dump { + __u64 dump_cpu_buffer_len; + __u64 dump_config_mem_buffer_per_1m; + __u64 dump_config_finalize_len; +}; + +struct kvm_s390_pv_info_vm { + __u64 inst_calls_list[4]; + __u64 max_cpus; + __u64 max_guests; + __u64 max_guest_addr; + __u64 feature_indication; +}; + +struct kvm_s390_pv_info_header { + __u32 id; + __u32 len_max; + __u32 len_written; + __u32 reserved; +}; + +struct kvm_s390_pv_info { + struct kvm_s390_pv_info_header header; + union { + struct kvm_s390_pv_info_dump dump; + struct kvm_s390_pv_info_vm vm; + }; +}; + enum pv_cmd_id { KVM_PV_ENABLE, KVM_PV_DISABLE, @@ -1629,6 +1738,8 @@ enum pv_cmd_id { KVM_PV_VERIFY, KVM_PV_PREP_RESET, KVM_PV_UNSHARE_ALL, + KVM_PV_INFO, + KVM_PV_DUMP, }; struct kvm_pv_cmd { @@ -1662,6 +1773,32 @@ struct kvm_xen_hvm_attr { struct { __u64 gfn; } shared_info; + struct { + __u32 send_port; + __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */ + __u32 flags; +#define KVM_XEN_EVTCHN_DEASSIGN (1 << 0) +#define KVM_XEN_EVTCHN_UPDATE (1 << 1) +#define KVM_XEN_EVTCHN_RESET (1 << 2) + /* + * Events sent by the guest are either looped back to + * the guest itself (potentially on a different port#) + * or signalled via an eventfd. + */ + union { + struct { + __u32 port; + __u32 vcpu; + __u32 priority; + } port; + struct { + __u32 port; /* Zero for eventfd */ + __s32 fd; + } eventfd; + __u32 padding[4]; + } deliver; + } evtchn; + __u32 xen_version; __u64 pad[8]; } u; }; @@ -1670,11 +1807,17 @@ struct kvm_xen_hvm_attr { #define KVM_XEN_ATTR_TYPE_LONG_MODE 0x0 #define KVM_XEN_ATTR_TYPE_SHARED_INFO 0x1 #define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 0x2 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_ATTR_TYPE_EVTCHN 0x3 +#define KVM_XEN_ATTR_TYPE_XEN_VERSION 0x4 /* Per-vCPU Xen attributes */ #define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr) #define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr) +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_HVM_EVTCHN_SEND _IOW(KVMIO, 0xd0, struct kvm_irq_routing_xen_evtchn) + #define KVM_GET_SREGS2 _IOR(KVMIO, 0xcc, struct kvm_sregs2) #define KVM_SET_SREGS2 _IOW(KVMIO, 0xcd, struct kvm_sregs2) @@ -1692,6 +1835,13 @@ struct kvm_xen_vcpu_attr { __u64 time_blocked; __u64 time_offline; } runstate; + __u32 vcpu_id; + struct { + __u32 port; + __u32 priority; + __u64 expires_ns; + } timer; + __u8 vector; } u; }; @@ -1702,6 +1852,10 @@ struct kvm_xen_vcpu_attr { #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT 0x3 #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA 0x4 #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 0x5 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 0x6 +#define KVM_XEN_VCPU_ATTR_TYPE_TIMER 0x7 +#define KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR 0x8 /* Secure Encrypted Virtualization command */ enum sev_cmd_id { @@ -1956,6 +2110,8 @@ struct kvm_dirty_gfn { #define KVM_BUS_LOCK_DETECTION_OFF (1 << 0) #define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1) +#define KVM_PMU_CAP_DISABLE (1 << 0) + /** * struct kvm_stats_header - Header of per vm/vcpu binary statistics data. * @flags: Some extra information for header, always 0 for now. @@ -1999,7 +2155,8 @@ struct kvm_stats_header { #define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT) #define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT) #define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT) -#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_CYCLES +#define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN #define KVM_STATS_BASE_SHIFT 8 #define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT) @@ -2031,4 +2188,44 @@ struct kvm_stats_desc { #define KVM_GET_STATS_FD _IO(KVMIO, 0xce) +/* Available with KVM_CAP_XSAVE2 */ +#define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) + +/* Available with KVM_CAP_S390_PROTECTED_DUMP */ +#define KVM_S390_PV_CPU_COMMAND _IOWR(KVMIO, 0xd0, struct kvm_pv_cmd) + +/* Available with KVM_CAP_X86_NOTIFY_VMEXIT */ +#define KVM_X86_NOTIFY_VMEXIT_ENABLED (1ULL << 0) +#define KVM_X86_NOTIFY_VMEXIT_USER (1ULL << 1) + +/* Available with KVM_CAP_S390_ZPCI_OP */ +#define KVM_S390_ZPCI_OP _IOW(KVMIO, 0xd1, struct kvm_s390_zpci_op) + +struct kvm_s390_zpci_op { + /* in */ + __u32 fh; /* target device */ + __u8 op; /* operation to perform */ + __u8 pad[3]; + union { + /* for KVM_S390_ZPCIOP_REG_AEN */ + struct { + __u64 ibv; /* Guest addr of interrupt bit vector */ + __u64 sb; /* Guest addr of summary bit */ + __u32 flags; + __u32 noi; /* Number of interrupts */ + __u8 isc; /* Guest interrupt subclass */ + __u8 sbo; /* Offset of guest summary bit vector */ + __u16 pad; + } reg_aen; + __u64 reserved[8]; + } u; +}; + +/* types for kvm_s390_zpci_op->op */ +#define KVM_S390_ZPCIOP_REG_AEN 0 +#define KVM_S390_ZPCIOP_DEREG_AEN 1 + +/* flags for kvm_s390_zpci_op->u.reg_aen.flags */ +#define KVM_S390_ZPCIOP_REGAEN_HOST (1 << 0) + #endif /* __LINUX_KVM_H */ diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h deleted file mode 100644 index 45fcbf99d72e..000000000000 --- a/tools/include/uapi/linux/lirc.h +++ /dev/null @@ -1,229 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * lirc.h - linux infrared remote control header file - * last modified 2010/07/13 by Jarod Wilson - */ - -#ifndef _LINUX_LIRC_H -#define _LINUX_LIRC_H - -#include <linux/types.h> -#include <linux/ioctl.h> - -#define PULSE_BIT 0x01000000 -#define PULSE_MASK 0x00FFFFFF - -#define LIRC_MODE2_SPACE 0x00000000 -#define LIRC_MODE2_PULSE 0x01000000 -#define LIRC_MODE2_FREQUENCY 0x02000000 -#define LIRC_MODE2_TIMEOUT 0x03000000 - -#define LIRC_VALUE_MASK 0x00FFFFFF -#define LIRC_MODE2_MASK 0xFF000000 - -#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) -#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) -#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) -#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) - -#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) -#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) - -#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) -#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) -#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) -#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) - -/* used heavily by lirc userspace */ -#define lirc_t int - -/*** lirc compatible hardware features ***/ - -#define LIRC_MODE2SEND(x) (x) -#define LIRC_SEND2MODE(x) (x) -#define LIRC_MODE2REC(x) ((x) << 16) -#define LIRC_REC2MODE(x) ((x) >> 16) - -#define LIRC_MODE_RAW 0x00000001 -#define LIRC_MODE_PULSE 0x00000002 -#define LIRC_MODE_MODE2 0x00000004 -#define LIRC_MODE_SCANCODE 0x00000008 -#define LIRC_MODE_LIRCCODE 0x00000010 - - -#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) -#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) -#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) -#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) - -#define LIRC_CAN_SEND_MASK 0x0000003f - -#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 -#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 -#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 - -#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) -#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) -#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) -#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE) -#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) - -#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) - -#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) -#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) - -#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 -#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 -#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 -#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 -#define LIRC_CAN_SET_REC_FILTER 0x08000000 - -#define LIRC_CAN_MEASURE_CARRIER 0x02000000 -#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 - -#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) -#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) - -#define LIRC_CAN_NOTIFY_DECODE 0x01000000 - -/*** IOCTL commands for lirc driver ***/ - -#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) - -#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) -#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) -#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) - -#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) -#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) - -/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ -#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) - -#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) -#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) -/* Note: these can reset the according pulse_width */ -#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) -#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) -#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) -#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) - -/* - * when a timeout != 0 is set the driver will send a - * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is - * never sent, timeout is disabled by default - */ -#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) - -/* 1 enables, 0 disables timeout reports in MODE2 */ -#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) - -/* - * if enabled from the next key press on the driver will send - * LIRC_MODE2_FREQUENCY packets - */ -#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) - -/* - * to set a range use LIRC_SET_REC_CARRIER_RANGE with the - * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound - */ -#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) - -#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) - -/* - * Return the recording timeout, which is either set by - * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols. - */ -#define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32) - -/* - * struct lirc_scancode - decoded scancode with protocol for use with - * LIRC_MODE_SCANCODE - * - * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR - * was decoded. - * @flags: should be 0 for transmit. When receiving scancodes, - * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set - * depending on the protocol - * @rc_proto: see enum rc_proto - * @keycode: the translated keycode. Set to 0 for transmit. - * @scancode: the scancode received or to be sent - */ -struct lirc_scancode { - __u64 timestamp; - __u16 flags; - __u16 rc_proto; - __u32 keycode; - __u64 scancode; -}; - -/* Set if the toggle bit of rc-5 or rc-6 is enabled */ -#define LIRC_SCANCODE_FLAG_TOGGLE 1 -/* Set if this is a nec or sanyo repeat */ -#define LIRC_SCANCODE_FLAG_REPEAT 2 - -/** - * enum rc_proto - the Remote Controller protocol - * - * @RC_PROTO_UNKNOWN: Protocol not known - * @RC_PROTO_OTHER: Protocol known but proprietary - * @RC_PROTO_RC5: Philips RC5 protocol - * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol - * @RC_PROTO_RC5_SZ: StreamZap variant of RC5 - * @RC_PROTO_JVC: JVC protocol - * @RC_PROTO_SONY12: Sony 12 bit protocol - * @RC_PROTO_SONY15: Sony 15 bit protocol - * @RC_PROTO_SONY20: Sony 20 bit protocol - * @RC_PROTO_NEC: NEC protocol - * @RC_PROTO_NECX: Extended NEC protocol - * @RC_PROTO_NEC32: NEC 32 bit protocol - * @RC_PROTO_SANYO: Sanyo protocol - * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard - * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse - * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol - * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol - * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol - * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol - * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol - * @RC_PROTO_SHARP: Sharp protocol - * @RC_PROTO_XMP: XMP protocol - * @RC_PROTO_CEC: CEC protocol - * @RC_PROTO_IMON: iMon Pad protocol - * @RC_PROTO_RCMM12: RC-MM protocol 12 bits - * @RC_PROTO_RCMM24: RC-MM protocol 24 bits - * @RC_PROTO_RCMM32: RC-MM protocol 32 bits - */ -enum rc_proto { - RC_PROTO_UNKNOWN = 0, - RC_PROTO_OTHER = 1, - RC_PROTO_RC5 = 2, - RC_PROTO_RC5X_20 = 3, - RC_PROTO_RC5_SZ = 4, - RC_PROTO_JVC = 5, - RC_PROTO_SONY12 = 6, - RC_PROTO_SONY15 = 7, - RC_PROTO_SONY20 = 8, - RC_PROTO_NEC = 9, - RC_PROTO_NECX = 10, - RC_PROTO_NEC32 = 11, - RC_PROTO_SANYO = 12, - RC_PROTO_MCIR2_KBD = 13, - RC_PROTO_MCIR2_MSE = 14, - RC_PROTO_RC6_0 = 15, - RC_PROTO_RC6_6A_20 = 16, - RC_PROTO_RC6_6A_24 = 17, - RC_PROTO_RC6_6A_32 = 18, - RC_PROTO_RC6_MCE = 19, - RC_PROTO_SHARP = 20, - RC_PROTO_XMP = 21, - RC_PROTO_CEC = 22, - RC_PROTO_IMON = 23, - RC_PROTO_RCMM12 = 24, - RC_PROTO_RCMM24 = 25, - RC_PROTO_RCMM32 = 26, -}; - -#endif diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h index bd8860eeb291..ccb7f5dad59b 100644 --- a/tools/include/uapi/linux/perf_event.h +++ b/tools/include/uapi/linux/perf_event.h @@ -164,8 +164,6 @@ enum perf_event_sample_format { PERF_SAMPLE_WEIGHT_STRUCT = 1U << 24, PERF_SAMPLE_MAX = 1U << 25, /* non-ABI */ - - __PERF_SAMPLE_CALLCHAIN_EARLY = 1ULL << 63, /* non-ABI; internal use */ }; #define PERF_SAMPLE_WEIGHT_TYPE (PERF_SAMPLE_WEIGHT | PERF_SAMPLE_WEIGHT_STRUCT) @@ -204,6 +202,8 @@ enum perf_branch_sample_type_shift { PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT = 17, /* save low level index of raw branch records */ + PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT = 18, /* save privilege mode */ + PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ }; @@ -233,6 +233,8 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_HW_INDEX = 1U << PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT, + PERF_SAMPLE_BRANCH_PRIV_SAVE = 1U << PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT, + PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, }; @@ -251,9 +253,50 @@ enum { PERF_BR_SYSRET = 8, /* syscall return */ PERF_BR_COND_CALL = 9, /* conditional function call */ PERF_BR_COND_RET = 10, /* conditional function return */ + PERF_BR_ERET = 11, /* exception return */ + PERF_BR_IRQ = 12, /* irq */ + PERF_BR_SERROR = 13, /* system error */ + PERF_BR_NO_TX = 14, /* not in transaction */ + PERF_BR_EXTEND_ABI = 15, /* extend ABI */ PERF_BR_MAX, }; +/* + * Common branch speculation outcome classification + */ +enum { + PERF_BR_SPEC_NA = 0, /* Not available */ + PERF_BR_SPEC_WRONG_PATH = 1, /* Speculative but on wrong path */ + PERF_BR_NON_SPEC_CORRECT_PATH = 2, /* Non-speculative but on correct path */ + PERF_BR_SPEC_CORRECT_PATH = 3, /* Speculative and on correct path */ + PERF_BR_SPEC_MAX, +}; + +enum { + PERF_BR_NEW_FAULT_ALGN = 0, /* Alignment fault */ + PERF_BR_NEW_FAULT_DATA = 1, /* Data fault */ + PERF_BR_NEW_FAULT_INST = 2, /* Inst fault */ + PERF_BR_NEW_ARCH_1 = 3, /* Architecture specific */ + PERF_BR_NEW_ARCH_2 = 4, /* Architecture specific */ + PERF_BR_NEW_ARCH_3 = 5, /* Architecture specific */ + PERF_BR_NEW_ARCH_4 = 6, /* Architecture specific */ + PERF_BR_NEW_ARCH_5 = 7, /* Architecture specific */ + PERF_BR_NEW_MAX, +}; + +enum { + PERF_BR_PRIV_UNKNOWN = 0, + PERF_BR_PRIV_USER = 1, + PERF_BR_PRIV_KERNEL = 2, + PERF_BR_PRIV_HV = 3, +}; + +#define PERF_BR_ARM64_FIQ PERF_BR_NEW_ARCH_1 +#define PERF_BR_ARM64_DEBUG_HALT PERF_BR_NEW_ARCH_2 +#define PERF_BR_ARM64_DEBUG_EXIT PERF_BR_NEW_ARCH_3 +#define PERF_BR_ARM64_DEBUG_INST PERF_BR_NEW_ARCH_4 +#define PERF_BR_ARM64_DEBUG_DATA PERF_BR_NEW_ARCH_5 + #define PERF_SAMPLE_BRANCH_PLM_ALL \ (PERF_SAMPLE_BRANCH_USER|\ PERF_SAMPLE_BRANCH_KERNEL|\ @@ -299,6 +342,7 @@ enum { * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST * } && !PERF_FORMAT_GROUP * * { u64 nr; @@ -306,6 +350,7 @@ enum { * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING * { u64 value; * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST * } cntr[nr]; * } && PERF_FORMAT_GROUP * }; @@ -315,8 +360,9 @@ enum perf_event_read_format { PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, PERF_FORMAT_ID = 1U << 2, PERF_FORMAT_GROUP = 1U << 3, + PERF_FORMAT_LOST = 1U << 4, - PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ + PERF_FORMAT_MAX = 1U << 5, /* non-ABI */ }; #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ @@ -465,6 +511,8 @@ struct perf_event_attr { /* * User provided data if sigtrap=1, passed back to user via * siginfo_t::si_perf_data, e.g. to permit user to identify the event. + * Note, siginfo_t::si_perf_data is long-sized, and sig_data will be + * truncated accordingly on 32 bit architectures. */ __u64 sig_data; }; @@ -487,7 +535,7 @@ struct perf_event_query_bpf { /* * User provided buffer to store program ids */ - __u32 ids[0]; + __u32 ids[]; }; /* @@ -1288,7 +1336,9 @@ union perf_mem_data_src { #define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ #define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ #define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ -/* 5-0xa available */ +/* 5-0x8 available */ +#define PERF_MEM_LVLNUM_CXL 0x09 /* CXL */ +#define PERF_MEM_LVLNUM_IO 0x0a /* I/O */ #define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ #define PERF_MEM_LVLNUM_LFB 0x0c /* LFB */ #define PERF_MEM_LVLNUM_RAM 0x0d /* RAM */ @@ -1306,7 +1356,7 @@ union perf_mem_data_src { #define PERF_MEM_SNOOP_SHIFT 19 #define PERF_MEM_SNOOPX_FWD 0x01 /* forward */ -/* 1 free */ +#define PERF_MEM_SNOOPX_PEER 0x02 /* xfer from peer */ #define PERF_MEM_SNOOPX_SHIFT 38 /* locked instruction */ @@ -1332,7 +1382,10 @@ union perf_mem_data_src { /* hop level */ #define PERF_MEM_HOPS_0 0x01 /* remote core, same node */ -/* 2-7 available */ +#define PERF_MEM_HOPS_1 0x02 /* remote node, same socket */ +#define PERF_MEM_HOPS_2 0x03 /* remote socket, same board */ +#define PERF_MEM_HOPS_3 0x04 /* remote board */ +/* 5-7 available */ #define PERF_MEM_HOPS_SHIFT 43 #define PERF_MEM_S(a, s) \ @@ -1353,6 +1406,7 @@ union perf_mem_data_src { * abort: aborting a hardware transaction * cycles: cycles from last branch (or 0 if not supported) * type: branch type + * spec: branch speculation info (or 0 if not supported) */ struct perf_branch_entry { __u64 from; @@ -1363,7 +1417,10 @@ struct perf_branch_entry { abort:1, /* transaction abort */ cycles:16, /* cycle count to last branch */ type:4, /* branch type */ - reserved:40; + spec:2, /* branch speculation info */ + new_type:4, /* additional branch type */ + priv:3, /* privilege level */ + reserved:31; }; union perf_sample_weight { diff --git a/tools/include/uapi/linux/pkt_cls.h b/tools/include/uapi/linux/pkt_cls.h index 12153771396a..3faee0199a9b 100644 --- a/tools/include/uapi/linux/pkt_cls.h +++ b/tools/include/uapi/linux/pkt_cls.h @@ -180,7 +180,7 @@ struct tc_u32_sel { short hoff; __be32 hmask; - struct tc_u32_key keys[0]; + struct tc_u32_key keys[]; }; struct tc_u32_mark { @@ -192,7 +192,7 @@ struct tc_u32_mark { struct tc_u32_pcnt { __u64 rcnt; __u64 rhit; - __u64 kcnts[0]; + __u64 kcnts[]; }; /* Flags */ diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h index bb73e9a0b24f..a5e06dcbba13 100644 --- a/tools/include/uapi/linux/prctl.h +++ b/tools/include/uapi/linux/prctl.h @@ -272,4 +272,16 @@ struct prctl_mm_map { # define PR_SCHED_CORE_SCOPE_THREAD_GROUP 1 # define PR_SCHED_CORE_SCOPE_PROCESS_GROUP 2 +/* arm64 Scalable Matrix Extension controls */ +/* Flag values must be in sync with SVE versions */ +#define PR_SME_SET_VL 63 /* set task vector length */ +# define PR_SME_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */ +#define PR_SME_GET_VL 64 /* get task vector length */ +/* Bits common to PR_SME_SET_VL and PR_SME_GET_VL */ +# define PR_SME_VL_LEN_MASK 0xffff +# define PR_SME_VL_INHERIT (1 << 17) /* inherit across exec */ + +#define PR_SET_VMA 0x53564d41 +# define PR_SET_VMA_ANON_NAME 0 + #endif /* _LINUX_PRCTL_H */ diff --git a/tools/include/uapi/linux/seg6.h b/tools/include/uapi/linux/seg6.h index 286e8d6a8e98..f94baf154c47 100644 --- a/tools/include/uapi/linux/seg6.h +++ b/tools/include/uapi/linux/seg6.h @@ -30,7 +30,7 @@ struct ipv6_sr_hdr { __u8 flags; __u16 tag; - struct in6_addr segments[0]; + struct in6_addr segments[]; }; #define SR6_FLAG1_PROTECTED (1 << 6) @@ -49,7 +49,7 @@ struct ipv6_sr_hdr { struct sr6_tlv { __u8 type; __u8 len; - __u8 data[0]; + __u8 data[]; }; #endif diff --git a/tools/include/uapi/linux/stat.h b/tools/include/uapi/linux/stat.h index 1500a0f58041..7cab2c65d3d7 100644 --- a/tools/include/uapi/linux/stat.h +++ b/tools/include/uapi/linux/stat.h @@ -124,7 +124,8 @@ struct statx { __u32 stx_dev_minor; /* 0x90 */ __u64 stx_mnt_id; - __u64 __spare2; + __u32 stx_dio_mem_align; /* Memory buffer alignment for direct I/O */ + __u32 stx_dio_offset_align; /* File offset alignment for direct I/O */ /* 0xa0 */ __u64 __spare3[12]; /* Spare space for future expansion */ /* 0x100 */ @@ -152,6 +153,7 @@ struct statx { #define STATX_BASIC_STATS 0x000007ffU /* The stuff in the normal stat struct */ #define STATX_BTIME 0x00000800U /* Want/got stx_btime */ #define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */ +#define STATX_DIOALIGN 0x00002000U /* Want/got direct I/O alignment info */ #define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */ diff --git a/tools/include/uapi/linux/stddef.h b/tools/include/uapi/linux/stddef.h new file mode 100644 index 000000000000..bb6ea517efb5 --- /dev/null +++ b/tools/include/uapi/linux/stddef.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_STDDEF_H +#define _LINUX_STDDEF_H + + + +#ifndef __always_inline +#define __always_inline __inline__ +#endif + +/** + * __struct_group() - Create a mirrored named and anonyomous struct + * + * @TAG: The tag name for the named sub-struct (usually empty) + * @NAME: The identifier name of the mirrored sub-struct + * @ATTRS: Any struct attributes (usually empty) + * @MEMBERS: The member declarations for the mirrored structs + * + * Used to create an anonymous union of two structs with identical layout + * and size: one anonymous and one named. The former's members can be used + * normally without sub-struct naming, and the latter can be used to + * reason about the start, end, and size of the group of struct members. + * The named struct can also be explicitly tagged for layer reuse, as well + * as both having struct attributes appended. + */ +#define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \ + union { \ + struct { MEMBERS } ATTRS; \ + struct TAG { MEMBERS } ATTRS NAME; \ + } + +/** + * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union + * + * @TYPE: The type of each flexible array element + * @NAME: The name of the flexible array member + * + * In order to have a flexible array member in a union or alone in a + * struct, it needs to be wrapped in an anonymous struct with at least 1 + * named member, but that member can be empty. + */ +#define __DECLARE_FLEX_ARRAY(TYPE, NAME) \ + struct { \ + struct { } __empty_ ## NAME; \ + TYPE NAME[]; \ + } +#endif diff --git a/tools/include/uapi/linux/tc_act/tc_bpf.h b/tools/include/uapi/linux/tc_act/tc_bpf.h index 653c4f94f76e..fe6c8f8f3e8c 100644 --- a/tools/include/uapi/linux/tc_act/tc_bpf.h +++ b/tools/include/uapi/linux/tc_act/tc_bpf.h @@ -1,11 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2015 Jiri Pirko <jiri@resnulli.us> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __LINUX_TC_BPF_H diff --git a/tools/include/uapi/linux/usbdevice_fs.h b/tools/include/uapi/linux/usbdevice_fs.h index cf525cddeb94..74a84e02422a 100644 --- a/tools/include/uapi/linux/usbdevice_fs.h +++ b/tools/include/uapi/linux/usbdevice_fs.h @@ -131,7 +131,7 @@ struct usbdevfs_urb { unsigned int signr; /* signal to be sent on completion, or 0 if none should be sent. */ void __user *usercontext; - struct usbdevfs_iso_packet_desc iso_frame_desc[0]; + struct usbdevfs_iso_packet_desc iso_frame_desc[]; }; /* ioctls for talking directly to drivers */ @@ -176,7 +176,7 @@ struct usbdevfs_disconnect_claim { struct usbdevfs_streams { unsigned int num_streams; /* Not used by USBDEVFS_FREE_STREAMS */ unsigned int num_eps; - unsigned char eps[0]; + unsigned char eps[]; }; /* diff --git a/tools/include/uapi/linux/vhost.h b/tools/include/uapi/linux/vhost.h index c998860d7bbc..f9f115a7c75b 100644 --- a/tools/include/uapi/linux/vhost.h +++ b/tools/include/uapi/linux/vhost.h @@ -89,11 +89,6 @@ /* Set or get vhost backend capability */ -/* Use message type V2 */ -#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 -/* IOTLB can accept batching hints */ -#define VHOST_BACKEND_F_IOTLB_BATCH 0x2 - #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64) #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64) @@ -150,4 +145,39 @@ /* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) +/* Get the config size */ +#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) + +/* Get the count of all virtqueues */ +#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) + +/* Get the number of virtqueue groups. */ +#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) + +/* Get the number of address spaces. */ +#define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int) + +/* Get the group for a virtqueue: read index, write group in num, + * The virtqueue index is stored in the index field of + * vhost_vring_state. The group for this specific virtqueue is + * returned via num field of vhost_vring_state. + */ +#define VHOST_VDPA_GET_VRING_GROUP _IOWR(VHOST_VIRTIO, 0x7B, \ + struct vhost_vring_state) +/* Set the ASID for a virtqueue group. The group index is stored in + * the index field of vhost_vring_state, the ASID associated with this + * group is stored at num field of vhost_vring_state. + */ +#define VHOST_VDPA_SET_GROUP_ASID _IOW(VHOST_VIRTIO, 0x7C, \ + struct vhost_vring_state) + +/* Suspend a device so it does not process virtqueue requests anymore + * + * After the return of ioctl the device must preserve all the necessary state + * (the virtqueue vring base plus the possible device specific states) that is + * required for restoring in the future. The device must not change its + * configuration after that point. + */ +#define VHOST_VDPA_SUSPEND _IO(VHOST_VIRTIO, 0x7D) + #endif diff --git a/tools/include/uapi/sound/asound.h b/tools/include/uapi/sound/asound.h index 5fbb79e30819..de6810e94abe 100644 --- a/tools/include/uapi/sound/asound.h +++ b/tools/include/uapi/sound/asound.h @@ -3,22 +3,6 @@ * Advanced Linux Sound Architecture - ALSA - Driver * Copyright (c) 1994-2003 by Jaroslav Kysela <perex@perex.cz>, * Abramo Bagnara <abramo@alsa-project.org> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef _UAPI__SOUND_ASOUND_H @@ -56,8 +40,10 @@ * * ****************************************************************************/ +#define AES_IEC958_STATUS_SIZE 24 + struct snd_aes_iec958 { - unsigned char status[24]; /* AES/IEC958 channel status bits */ + unsigned char status[AES_IEC958_STATUS_SIZE]; /* AES/IEC958 channel status bits */ unsigned char subcode[147]; /* AES/IEC958 subcode bits */ unsigned char pad; /* nothing */ unsigned char dig_subframe[4]; /* AES/IEC958 subframe bits */ @@ -202,6 +188,11 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_S24_BE ((__force snd_pcm_format_t) 7) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_LE ((__force snd_pcm_format_t) 8) /* low three bytes */ #define SNDRV_PCM_FORMAT_U24_BE ((__force snd_pcm_format_t) 9) /* low three bytes */ +/* + * For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the + * available bit count in most significant bit. It's for the case of so-called 'left-justified' or + * `right-padding` sample which has less width than 32 bit. + */ #define SNDRV_PCM_FORMAT_S32_LE ((__force snd_pcm_format_t) 10) #define SNDRV_PCM_FORMAT_S32_BE ((__force snd_pcm_format_t) 11) #define SNDRV_PCM_FORMAT_U32_LE ((__force snd_pcm_format_t) 12) @@ -300,7 +291,7 @@ typedef int __bitwise snd_pcm_subformat_t; #define SNDRV_PCM_INFO_HAS_LINK_ESTIMATED_ATIME 0x04000000 /* report estimated link audio time */ #define SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME 0x08000000 /* report synchronized audio/system time */ #define SNDRV_PCM_INFO_EXPLICIT_SYNC 0x10000000 /* needs explicit sync of pointers and data */ - +#define SNDRV_PCM_INFO_NO_REWINDS 0x20000000 /* hardware can only support monotonic changes of appl_ptr */ #define SNDRV_PCM_INFO_DRAIN_TRIGGER 0x40000000 /* internal kernel flag - trigger in drain */ #define SNDRV_PCM_INFO_FIFO_IN_FRAMES 0x80000000 /* internal kernel flag - FIFO size is in frames */ @@ -1099,7 +1090,7 @@ struct snd_ctl_elem_value { struct snd_ctl_tlv { unsigned int numid; /* control element numeric identification */ unsigned int length; /* in bytes aligned to 4 */ - unsigned int tlv[0]; /* first TLV */ + unsigned int tlv[]; /* first TLV */ }; #define SNDRV_CTL_IOCTL_PVERSION _IOR('U', 0x00, int) |