diff options
Diffstat (limited to 'tools/include')
| -rw-r--r-- | tools/include/linux/filter.h | 10 | ||||
| -rw-r--r-- | tools/include/uapi/linux/bpf.h | 134 | ||||
| -rw-r--r-- | tools/include/uapi/linux/lirc.h | 217 | ||||
| -rw-r--r-- | tools/include/uapi/linux/seg6.h | 55 | ||||
| -rw-r--r-- | tools/include/uapi/linux/seg6_local.h | 80 |
5 files changed, 470 insertions, 26 deletions
diff --git a/tools/include/linux/filter.h b/tools/include/linux/filter.h index c5e512da8d8a..af55acf73e75 100644 --- a/tools/include/linux/filter.h +++ b/tools/include/linux/filter.h @@ -263,6 +263,16 @@ #define BPF_LD_MAP_FD(DST, MAP_FD) \ BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD) +/* Relative call */ + +#define BPF_CALL_REL(TGT) \ + ((struct bpf_insn) { \ + .code = BPF_JMP | BPF_CALL, \ + .dst_reg = 0, \ + .src_reg = BPF_PSEUDO_CALL, \ + .off = 0, \ + .imm = TGT }) + /* Program exit */ #define BPF_EXIT_INSN() \ diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 671486133988..e0b06784f227 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -143,6 +143,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_CGROUP_SOCK_ADDR, BPF_PROG_TYPE_LWT_SEG6LOCAL, + BPF_PROG_TYPE_LIRC_MODE2, }; enum bpf_attach_type { @@ -160,6 +161,9 @@ enum bpf_attach_type { BPF_CGROUP_INET6_CONNECT, BPF_CGROUP_INET4_POST_BIND, BPF_CGROUP_INET6_POST_BIND, + BPF_CGROUP_UDP4_SENDMSG, + BPF_CGROUP_UDP6_SENDMSG, + BPF_LIRC_MODE2, __MAX_BPF_ATTACH_TYPE }; @@ -1008,7 +1012,6 @@ union bpf_attr { * :: * * # sysctl kernel.perf_event_max_stack=<new value> - * * Return * The positive or null stack id on success, or a negative error * in case of failure. @@ -1819,10 +1822,9 @@ union bpf_attr { * :: * * # sysctl kernel.perf_event_max_stack=<new value> - * * Return - * a non-negative value equal to or less than size on success, or - * a negative error in case of failure. + * A non-negative value equal to or less than *size* on success, + * or a negative error in case of failure. * * int skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header) * Description @@ -1843,7 +1845,6 @@ union bpf_attr { * in socket filters where *skb*\ **->data** does not always point * to the start of the mac header and where "direct packet access" * is not available. - * * Return * 0 on success, or a negative error in case of failure. * @@ -1853,22 +1854,24 @@ union bpf_attr { * If lookup is successful and result shows packet is to be * forwarded, the neighbor tables are searched for the nexthop. * If successful (ie., FIB lookup shows forwarding and nexthop - * is resolved), the nexthop address is returned in ipv4_dst, - * ipv6_dst or mpls_out based on family, smac is set to mac - * address of egress device, dmac is set to nexthop mac address, - * rt_metric is set to metric from route. + * is resolved), the nexthop address is returned in ipv4_dst + * or ipv6_dst based on family, smac is set to mac address of + * egress device, dmac is set to nexthop mac address, rt_metric + * is set to metric from route (IPv4/IPv6 only). * * *plen* argument is the size of the passed in struct. - * *flags* argument can be one or more BPF_FIB_LOOKUP_ flags: + * *flags* argument can be a combination of one or more of the + * following values: * - * **BPF_FIB_LOOKUP_DIRECT** means do a direct table lookup vs - * full lookup using FIB rules - * **BPF_FIB_LOOKUP_OUTPUT** means do lookup from an egress - * perspective (default is ingress) + * **BPF_FIB_LOOKUP_DIRECT** + * Do a direct table lookup vs full lookup using FIB + * rules. + * **BPF_FIB_LOOKUP_OUTPUT** + * Perform lookup from an egress perspective (default is + * ingress). * * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. - * * Return * Egress device index on success, 0 if packet needs to continue * up the stack for further processing or a negative error in case @@ -2004,6 +2007,74 @@ union bpf_attr { * direct packet access. * Return * 0 on success, or a negative error in case of failure. + * + * int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded key press with *scancode*, + * *toggle* value in the given *protocol*. The scancode will be + * translated to a keycode using the rc keymap, and reported as + * an input key down event. After a period a key up event is + * generated. This period can be extended by calling either + * **bpf_rc_keydown** () again with the same values, or calling + * **bpf_rc_repeat** (). + * + * Some protocols include a toggle bit, in case the button was + * released and pressed again between consecutive scancodes. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * The *protocol* is the decoded protocol number (see + * **enum rc_proto** for some predefined values). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * + * Return + * 0 + * + * int bpf_rc_repeat(void *ctx) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded repeat key message. This delays + * the generation of a key up event for previously generated + * key down event. + * + * Some IR protocols like NEC have a special IR message for + * repeating last button, for when a button is held down. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * + * Return + * 0 + * + * uint64_t bpf_skb_cgroup_id(struct sk_buff *skb) + * Description + * Return the cgroup v2 id of the socket associated with the *skb*. + * This is roughly similar to the **bpf_get_cgroup_classid**\ () + * helper for cgroup v1 by providing a tag resp. identifier that + * can be matched on or used for map lookups e.g. to implement + * policy. The cgroup v2 id of a given path in the hierarchy is + * exposed in user space through the f_handle API in order to get + * to the same 64-bit id. + * + * This helper can be used on TC egress path, but not on ingress, + * and is available only if the kernel was compiled with the + * **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_get_current_cgroup_id(void) + * Return + * A 64-bit integer containing the current cgroup id based + * on the cgroup within which the current task is running. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2082,7 +2153,11 @@ union bpf_attr { FN(lwt_push_encap), \ FN(lwt_seg6_store_bytes), \ FN(lwt_seg6_adjust_srh), \ - FN(lwt_seg6_action), + FN(lwt_seg6_action), \ + FN(rc_repeat), \ + FN(rc_keydown), \ + FN(skb_cgroup_id), \ + FN(get_current_cgroup_id), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2199,7 +2274,7 @@ struct bpf_tunnel_key { }; __u8 tunnel_tos; __u8 tunnel_ttl; - __u16 tunnel_ext; + __u16 tunnel_ext; /* Padding, future use. */ __u32 tunnel_label; }; @@ -2210,6 +2285,7 @@ struct bpf_xfrm_state { __u32 reqid; __u32 spi; /* Stored in network byte order */ __u16 family; + __u16 ext; /* Padding, future use. */ union { __u32 remote_ipv4; /* Stored in network byte order */ __u32 remote_ipv6[4]; /* Stored in network byte order */ @@ -2364,6 +2440,12 @@ struct bpf_sock_addr { __u32 family; /* Allows 4-byte read, but no write */ __u32 type; /* Allows 4-byte read, but no write */ __u32 protocol; /* Allows 4-byte read, but no write */ + __u32 msg_src_ip4; /* Allows 1,2,4-byte read an 4-byte write. + * Stored in network byte order. + */ + __u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. + * Stored in network byte order. + */ }; /* User bpf_sock_ops struct to access socket values and specify request ops @@ -2531,8 +2613,10 @@ struct bpf_raw_tracepoint_args { #define BPF_FIB_LOOKUP_OUTPUT BIT(1) struct bpf_fib_lookup { - /* input */ - __u8 family; /* network family, AF_INET, AF_INET6, AF_MPLS */ + /* input: network family for lookup (AF_INET, AF_INET6) + * output: network family of egress nexthop + */ + __u8 family; /* set if lookup is to consider L4 data - e.g., FIB rules */ __u8 l4_protocol; @@ -2548,22 +2632,20 @@ struct bpf_fib_lookup { __u8 tos; /* AF_INET */ __be32 flowlabel; /* AF_INET6 */ - /* output: metric of fib result */ - __u32 rt_metric; + /* output: metric of fib result (IPv4/IPv6 only) */ + __u32 rt_metric; }; union { - __be32 mpls_in; __be32 ipv4_src; __u32 ipv6_src[4]; /* in6_addr; network order */ }; - /* input to bpf_fib_lookup, *dst is destination address. - * output: bpf_fib_lookup sets to gateway address + /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in + * network header. output: bpf_fib_lookup sets to gateway address + * if FIB lookup returns gateway route */ union { - /* return for MPLS lookups */ - __be32 mpls_out[4]; /* support up to 4 labels */ __be32 ipv4_dst; __u32 ipv6_dst[4]; /* in6_addr; network order */ }; diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h new file mode 100644 index 000000000000..f189931042a7 --- /dev/null +++ b/tools/include/uapi/linux/lirc.h @@ -0,0 +1,217 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * lirc.h - linux infrared remote control header file + * last modified 2010/07/13 by Jarod Wilson + */ + +#ifndef _LINUX_LIRC_H +#define _LINUX_LIRC_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define PULSE_BIT 0x01000000 +#define PULSE_MASK 0x00FFFFFF + +#define LIRC_MODE2_SPACE 0x00000000 +#define LIRC_MODE2_PULSE 0x01000000 +#define LIRC_MODE2_FREQUENCY 0x02000000 +#define LIRC_MODE2_TIMEOUT 0x03000000 + +#define LIRC_VALUE_MASK 0x00FFFFFF +#define LIRC_MODE2_MASK 0xFF000000 + +#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) + +#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) +#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) + +#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) +#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) +#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) +#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) + +/* used heavily by lirc userspace */ +#define lirc_t int + +/*** lirc compatible hardware features ***/ + +#define LIRC_MODE2SEND(x) (x) +#define LIRC_SEND2MODE(x) (x) +#define LIRC_MODE2REC(x) ((x) << 16) +#define LIRC_REC2MODE(x) ((x) >> 16) + +#define LIRC_MODE_RAW 0x00000001 +#define LIRC_MODE_PULSE 0x00000002 +#define LIRC_MODE_MODE2 0x00000004 +#define LIRC_MODE_SCANCODE 0x00000008 +#define LIRC_MODE_LIRCCODE 0x00000010 + + +#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) +#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) +#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) +#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_SEND_MASK 0x0000003f + +#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 +#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 +#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 + +#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) +#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) +#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) +#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE) +#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) + +#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) +#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) + +#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 +#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 +#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 +#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 +#define LIRC_CAN_SET_REC_FILTER 0x08000000 + +#define LIRC_CAN_MEASURE_CARRIER 0x02000000 +#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 + +#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) +#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) + +#define LIRC_CAN_NOTIFY_DECODE 0x01000000 + +/*** IOCTL commands for lirc driver ***/ + +#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) + +#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) +#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) +#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) + +#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) +#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) + +/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ +#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) + +#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) +#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) +/* Note: these can reset the according pulse_width */ +#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) +#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) +#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) +#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) + +/* + * when a timeout != 0 is set the driver will send a + * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is + * never sent, timeout is disabled by default + */ +#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) + +/* 1 enables, 0 disables timeout reports in MODE2 */ +#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) + +/* + * if enabled from the next key press on the driver will send + * LIRC_MODE2_FREQUENCY packets + */ +#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) + +/* + * to set a range use LIRC_SET_REC_CARRIER_RANGE with the + * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound + */ +#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) + +#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) + +/* + * struct lirc_scancode - decoded scancode with protocol for use with + * LIRC_MODE_SCANCODE + * + * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR + * was decoded. + * @flags: should be 0 for transmit. When receiving scancodes, + * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set + * depending on the protocol + * @rc_proto: see enum rc_proto + * @keycode: the translated keycode. Set to 0 for transmit. + * @scancode: the scancode received or to be sent + */ +struct lirc_scancode { + __u64 timestamp; + __u16 flags; + __u16 rc_proto; + __u32 keycode; + __u64 scancode; +}; + +/* Set if the toggle bit of rc-5 or rc-6 is enabled */ +#define LIRC_SCANCODE_FLAG_TOGGLE 1 +/* Set if this is a nec or sanyo repeat */ +#define LIRC_SCANCODE_FLAG_REPEAT 2 + +/** + * enum rc_proto - the Remote Controller protocol + * + * @RC_PROTO_UNKNOWN: Protocol not known + * @RC_PROTO_OTHER: Protocol known but proprietary + * @RC_PROTO_RC5: Philips RC5 protocol + * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol + * @RC_PROTO_RC5_SZ: StreamZap variant of RC5 + * @RC_PROTO_JVC: JVC protocol + * @RC_PROTO_SONY12: Sony 12 bit protocol + * @RC_PROTO_SONY15: Sony 15 bit protocol + * @RC_PROTO_SONY20: Sony 20 bit protocol + * @RC_PROTO_NEC: NEC protocol + * @RC_PROTO_NECX: Extended NEC protocol + * @RC_PROTO_NEC32: NEC 32 bit protocol + * @RC_PROTO_SANYO: Sanyo protocol + * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard + * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse + * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol + * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol + * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol + * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol + * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol + * @RC_PROTO_SHARP: Sharp protocol + * @RC_PROTO_XMP: XMP protocol + * @RC_PROTO_CEC: CEC protocol + * @RC_PROTO_IMON: iMon Pad protocol + */ +enum rc_proto { + RC_PROTO_UNKNOWN = 0, + RC_PROTO_OTHER = 1, + RC_PROTO_RC5 = 2, + RC_PROTO_RC5X_20 = 3, + RC_PROTO_RC5_SZ = 4, + RC_PROTO_JVC = 5, + RC_PROTO_SONY12 = 6, + RC_PROTO_SONY15 = 7, + RC_PROTO_SONY20 = 8, + RC_PROTO_NEC = 9, + RC_PROTO_NECX = 10, + RC_PROTO_NEC32 = 11, + RC_PROTO_SANYO = 12, + RC_PROTO_MCIR2_KBD = 13, + RC_PROTO_MCIR2_MSE = 14, + RC_PROTO_RC6_0 = 15, + RC_PROTO_RC6_6A_20 = 16, + RC_PROTO_RC6_6A_24 = 17, + RC_PROTO_RC6_6A_32 = 18, + RC_PROTO_RC6_MCE = 19, + RC_PROTO_SHARP = 20, + RC_PROTO_XMP = 21, + RC_PROTO_CEC = 22, + RC_PROTO_IMON = 23, +}; + +#endif diff --git a/tools/include/uapi/linux/seg6.h b/tools/include/uapi/linux/seg6.h new file mode 100644 index 000000000000..286e8d6a8e98 --- /dev/null +++ b/tools/include/uapi/linux/seg6.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_SEG6_H +#define _UAPI_LINUX_SEG6_H + +#include <linux/types.h> +#include <linux/in6.h> /* For struct in6_addr. */ + +/* + * SRH + */ +struct ipv6_sr_hdr { + __u8 nexthdr; + __u8 hdrlen; + __u8 type; + __u8 segments_left; + __u8 first_segment; /* Represents the last_entry field of SRH */ + __u8 flags; + __u16 tag; + + struct in6_addr segments[0]; +}; + +#define SR6_FLAG1_PROTECTED (1 << 6) +#define SR6_FLAG1_OAM (1 << 5) +#define SR6_FLAG1_ALERT (1 << 4) +#define SR6_FLAG1_HMAC (1 << 3) + +#define SR6_TLV_INGRESS 1 +#define SR6_TLV_EGRESS 2 +#define SR6_TLV_OPAQUE 3 +#define SR6_TLV_PADDING 4 +#define SR6_TLV_HMAC 5 + +#define sr_has_hmac(srh) ((srh)->flags & SR6_FLAG1_HMAC) + +struct sr6_tlv { + __u8 type; + __u8 len; + __u8 data[0]; +}; + +#endif diff --git a/tools/include/uapi/linux/seg6_local.h b/tools/include/uapi/linux/seg6_local.h new file mode 100644 index 000000000000..edc138bdc56d --- /dev/null +++ b/tools/include/uapi/linux/seg6_local.h @@ -0,0 +1,80 @@ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_SEG6_LOCAL_H +#define _UAPI_LINUX_SEG6_LOCAL_H + +#include <linux/seg6.h> + +enum { + SEG6_LOCAL_UNSPEC, + SEG6_LOCAL_ACTION, + SEG6_LOCAL_SRH, + SEG6_LOCAL_TABLE, + SEG6_LOCAL_NH4, + SEG6_LOCAL_NH6, + SEG6_LOCAL_IIF, + SEG6_LOCAL_OIF, + SEG6_LOCAL_BPF, + __SEG6_LOCAL_MAX, +}; +#define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1) + +enum { + SEG6_LOCAL_ACTION_UNSPEC = 0, + /* node segment */ + SEG6_LOCAL_ACTION_END = 1, + /* adjacency segment (IPv6 cross-connect) */ + SEG6_LOCAL_ACTION_END_X = 2, + /* lookup of next seg NH in table */ + SEG6_LOCAL_ACTION_END_T = 3, + /* decap and L2 cross-connect */ + SEG6_LOCAL_ACTION_END_DX2 = 4, + /* decap and IPv6 cross-connect */ + SEG6_LOCAL_ACTION_END_DX6 = 5, + /* decap and IPv4 cross-connect */ + SEG6_LOCAL_ACTION_END_DX4 = 6, + /* decap and lookup of DA in v6 table */ + SEG6_LOCAL_ACTION_END_DT6 = 7, + /* decap and lookup of DA in v4 table */ + SEG6_LOCAL_ACTION_END_DT4 = 8, + /* binding segment with insertion */ + SEG6_LOCAL_ACTION_END_B6 = 9, + /* binding segment with encapsulation */ + SEG6_LOCAL_ACTION_END_B6_ENCAP = 10, + /* binding segment with MPLS encap */ + SEG6_LOCAL_ACTION_END_BM = 11, + /* lookup last seg in table */ + SEG6_LOCAL_ACTION_END_S = 12, + /* forward to SR-unaware VNF with static proxy */ + SEG6_LOCAL_ACTION_END_AS = 13, + /* forward to SR-unaware VNF with masquerading */ + SEG6_LOCAL_ACTION_END_AM = 14, + /* custom BPF action */ + SEG6_LOCAL_ACTION_END_BPF = 15, + + __SEG6_LOCAL_ACTION_MAX, +}; + +#define SEG6_LOCAL_ACTION_MAX (__SEG6_LOCAL_ACTION_MAX - 1) + +enum { + SEG6_LOCAL_BPF_PROG_UNSPEC, + SEG6_LOCAL_BPF_PROG, + SEG6_LOCAL_BPF_PROG_NAME, + __SEG6_LOCAL_BPF_PROG_MAX, +}; + +#define SEG6_LOCAL_BPF_PROG_MAX (__SEG6_LOCAL_BPF_PROG_MAX - 1) + +#endif |