diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/mptcp_join.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/mptcp_join.sh | 3228 |
1 files changed, 2170 insertions, 1058 deletions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 27d0eb9afdca..f3dd5f2a0272 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -1,6 +1,11 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# Double quotes to prevent globbing and word splitting is recommended in new +# code but we accept it, especially because there were too many before having +# address all other issues detected by shellcheck. +#shellcheck disable=SC2086 + ret=0 sin="" sinfail="" @@ -9,15 +14,28 @@ cin="" cinfail="" cinsent="" cout="" +capout="" +ns1="" +ns2="" ksft_skip=4 timeout_poll=30 timeout_test=$((timeout_poll * 2 + 1)) -mptcp_connect="" capture=0 checksum=0 -do_all_tests=1 - +ip_mptcp=0 +check_invert=0 +validate_checksum=0 +init=0 + +declare -A all_tests +declare -a only_tests_ids +declare -a only_tests_names +declare -A failed_tests TEST_COUNT=0 +TEST_NAME="" +nr_blank=40 + +export FAILING_LINKS="" # generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) || # (ip6 && (ip6[74] & 0xf0) == 0x30)'" @@ -37,19 +55,22 @@ CBPF_MPTCP_SUBOPTION_ADD_ADDR="14, 6 0 0 65535, 6 0 0 0" -init() +init_partial() { capout=$(mktemp) - rndh=$(printf %x $sec)-$(mktemp -u XXXXXX) + local rndh + rndh=$(mktemp -u XXXXXX) ns1="ns1-$rndh" ns2="ns2-$rndh" - for netns in "$ns1" "$ns2";do + local netns + for netns in "$ns1" "$ns2"; do ip netns add $netns || exit $ksft_skip ip -net $netns link set lo up ip netns exec $netns sysctl -q net.mptcp.enabled=1 + ip netns exec $netns sysctl -q net.mptcp.pm_type=0 ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0 ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0 if [ $checksum -eq 1 ]; then @@ -57,13 +78,18 @@ init() fi done - # ns1 ns2 + check_invert=0 + validate_checksum=$checksum + FAILING_LINKS="" + + # ns1 ns2 # ns1eth1 ns2eth1 # ns1eth2 ns2eth2 # ns1eth3 ns2eth3 # ns1eth4 ns2eth4 - for i in `seq 1 4`; do + local i + for i in $(seq 1 4); do ip link add ns1eth$i netns "$ns1" type veth peer name ns2eth$i netns "$ns2" ip -net "$ns1" addr add 10.0.$i.1/24 dev ns1eth$i ip -net "$ns1" addr add dead:beef:$i::1/64 dev ns1eth$i nodad @@ -75,12 +101,14 @@ init() # let $ns2 reach any $ns1 address from any interface ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i + ip -net "$ns2" route add default via dead:beef:$i::1 dev ns2eth$i metric 10$i done } init_shapers() { - for i in `seq 1 4`; do + local i + for i in $(seq 1 4); do tc -n $ns1 qdisc add dev ns1eth$i root netem rate 20mbit delay 1 tc -n $ns2 qdisc add dev ns2eth$i root netem rate 20mbit delay 1 done @@ -90,12 +118,48 @@ cleanup_partial() { rm -f "$capout" + local netns for netns in "$ns1" "$ns2"; do ip netns del $netns rm -f /tmp/$netns.{nstat,out} done } +check_tools() +{ + if ! ip -Version &> /dev/null; then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip + fi + + if ! iptables -V &> /dev/null; then + echo "SKIP: Could not run all tests without iptables tool" + exit $ksft_skip + fi + + if ! ip6tables -V &> /dev/null; then + echo "SKIP: Could not run all tests without ip6tables tool" + exit $ksft_skip + fi +} + +init() { + init=1 + + check_tools + + sin=$(mktemp) + sout=$(mktemp) + cin=$(mktemp) + cinsent=$(mktemp) + cout=$(mktemp) + + trap cleanup EXIT + + make_file "$cin" "client" 1 + make_file "$sin" "server" 1 +} + cleanup() { rm -f "$cin" "$cout" "$sinfail" @@ -103,33 +167,73 @@ cleanup() cleanup_partial } +skip_test() +{ + if [ "${#only_tests_ids[@]}" -eq 0 ] && [ "${#only_tests_names[@]}" -eq 0 ]; then + return 1 + fi + + local i + for i in "${only_tests_ids[@]}"; do + if [ "${TEST_COUNT}" -eq "${i}" ]; then + return 1 + fi + done + for i in "${only_tests_names[@]}"; do + if [ "${TEST_NAME}" = "${i}" ]; then + return 1 + fi + done + + return 0 +} + +# $1: test name reset() { - cleanup_partial - init + TEST_NAME="${1}" + + TEST_COUNT=$((TEST_COUNT+1)) + + if skip_test; then + return 1 + fi + + if [ "${init}" != "1" ]; then + init + else + cleanup_partial + fi + + init_partial + + return 0 } +# $1: test name reset_with_cookies() { - reset + reset "${1}" || return 1 - for netns in "$ns1" "$ns2";do + local netns + for netns in "$ns1" "$ns2"; do ip netns exec $netns sysctl -q net.ipv4.tcp_syncookies=2 done } +# $1: test name reset_with_add_addr_timeout() { - local ip="${1:-4}" + local ip="${2:-4}" local tables + reset "${1}" || return 1 + tables="iptables" if [ $ip -eq 6 ]; then tables="ip6tables" fi - reset - ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 ip netns exec $ns2 $tables -A OUTPUT -p tcp \ -m tcp --tcp-option 30 \ @@ -138,45 +242,97 @@ reset_with_add_addr_timeout() -j DROP } +# $1: test name reset_with_checksum() { local ns1_enable=$1 local ns2_enable=$2 - reset + reset "checksum test ${1} ${2}" || return 1 ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=$ns1_enable ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=$ns2_enable + + validate_checksum=1 } reset_with_allow_join_id0() { - local ns1_enable=$1 - local ns2_enable=$2 + local ns1_enable=$2 + local ns2_enable=$3 - reset + reset "${1}" || return 1 ip netns exec $ns1 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns1_enable ip netns exec $ns2 sysctl -q net.mptcp.allow_join_initial_addr_port=$ns2_enable } -ip -Version > /dev/null 2>&1 -if [ $? -ne 0 ];then - echo "SKIP: Could not run test without ip tool" - exit $ksft_skip -fi +# Modify TCP payload without corrupting the TCP packet +# +# This rule inverts a 8-bit word at byte offset 148 for the 2nd TCP ACK packets +# carrying enough data. +# Once it is done, the TCP Checksum field is updated so the packet is still +# considered as valid at the TCP level. +# Because the MPTCP checksum, covering the TCP options and data, has not been +# updated, the modification will be detected and an MP_FAIL will be emitted: +# what we want to validate here without corrupting "random" MPTCP options. +# +# To avoid having tc producing this pr_info() message for each TCP ACK packets +# not carrying enough data: +# +# tc action pedit offset 162 out of bounds +# +# Netfilter is used to mark packets with enough data. +reset_with_fail() +{ + reset "${1}" || return 1 -iptables -V > /dev/null 2>&1 -if [ $? -ne 0 ];then - echo "SKIP: Could not run all tests without iptables tool" - exit $ksft_skip -fi + ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1 + ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1 -ip6tables -V > /dev/null 2>&1 -if [ $? -ne 0 ];then - echo "SKIP: Could not run all tests without ip6tables tool" - exit $ksft_skip -fi + check_invert=1 + validate_checksum=1 + local i="$2" + local ip="${3:-4}" + local tables + + tables="iptables" + if [ $ip -eq 6 ]; then + tables="ip6tables" + fi + + ip netns exec $ns2 $tables \ + -t mangle \ + -A OUTPUT \ + -o ns2eth$i \ + -p tcp \ + -m length --length 150:9999 \ + -m statistic --mode nth --packet 1 --every 99999 \ + -j MARK --set-mark 42 || exit 1 + + tc -n $ns2 qdisc add dev ns2eth$i clsact || exit 1 + tc -n $ns2 filter add dev ns2eth$i egress \ + protocol ip prio 1000 \ + handle 42 fw \ + action pedit munge offset 148 u8 invert \ + pipe csum tcp \ + index 100 || exit 1 +} + +fail_test() +{ + ret=1 + failed_tests[${TEST_COUNT}]="${TEST_NAME}" +} + +get_failed_tests_ids() +{ + # sorted + local i + for i in "${!failed_tests[@]}"; do + echo "${i}" + done | sort -n +} print_file_err() { @@ -187,47 +343,64 @@ print_file_err() check_transfer() { - in=$1 - out=$2 - what=$3 - - cmp "$in" "$out" > /dev/null 2>&1 - if [ $? -ne 0 ] ;then - echo "[ FAIL ] $what does not match (in, out):" - print_file_err "$in" - print_file_err "$out" - ret=1 - - return 1 + local in=$1 + local out=$2 + local what=$3 + local bytes=$4 + local i a b + + local line + if [ -n "$bytes" ]; then + # when truncating we must check the size explicitly + local out_size=$(wc -c $out | awk '{print $1}') + if [ $out_size -ne $bytes ]; then + echo "[ FAIL ] $what output file has wrong size ($out_size, $bytes)" + fail_test + return 1 + fi + bytes="--bytes=${bytes}" fi + cmp -l "$in" "$out" ${bytes} | while read -r i a b; do + local sum=$((0${a} + 0${b})) + if [ $check_invert -eq 0 ] || [ $sum -ne $((0xff)) ]; then + echo "[ FAIL ] $what does not match (in, out):" + print_file_err "$in" + print_file_err "$out" + fail_test + + return 1 + else + echo "$what has inverted byte at ${i}" + fi + done return 0 } do_ping() { - listener_ns="$1" - connector_ns="$2" - connect_addr="$3" + local listener_ns="$1" + local connector_ns="$2" + local connect_addr="$3" - ip netns exec ${connector_ns} ping -q -c 1 $connect_addr >/dev/null - if [ $? -ne 0 ] ; then + if ! ip netns exec ${connector_ns} ping -q -c 1 $connect_addr >/dev/null; then echo "$listener_ns -> $connect_addr connectivity [ FAIL ]" 1>&2 - ret=1 + fail_test fi } link_failure() { - ns="$1" + local ns="$1" if [ -z "$FAILING_LINKS" ]; then l=$((RANDOM%4)) FAILING_LINKS=$((l+1)) fi + local l for l in $FAILING_LINKS; do - veth="ns1eth$l" + local veth="ns1eth$l" ip -net "$ns" link set "$veth" down done } @@ -244,9 +417,10 @@ wait_local_port_listen() local listener_ns="${1}" local port="${2}" - local port_hex i - + local port_hex port_hex="$(printf "%04X" "${port}")" + + local i for i in $(seq 10); do ip netns exec "${listener_ns}" cat /proc/net/tcp* | \ awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" && @@ -257,7 +431,7 @@ wait_local_port_listen() rm_addr_count() { - ns=${1} + local ns=${1} ip netns exec ${ns} nstat -as | grep MPTcpExtRmAddr | awk '{print $2}' } @@ -268,8 +442,8 @@ wait_rm_addr() local ns="${1}" local old_cnt="${2}" local cnt - local i + local i for i in $(seq 10); do cnt=$(rm_addr_count ${ns}) [ "$cnt" = "${old_cnt}" ] || break @@ -277,27 +451,238 @@ wait_rm_addr() done } +wait_mpj() +{ + local ns="${1}" + local cnt old_cnt + + old_cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}') + + local i + for i in $(seq 10); do + cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}') + [ "$cnt" = "${old_cnt}" ] || break + sleep 0.1 + done +} + +kill_wait() +{ + kill $1 > /dev/null 2>&1 + wait $1 2>/dev/null +} + +pm_nl_set_limits() +{ + local ns=$1 + local addrs=$2 + local subflows=$3 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp limits set add_addr_accepted $addrs subflows $subflows + else + ip netns exec $ns ./pm_nl_ctl limits $addrs $subflows + fi +} + +pm_nl_add_endpoint() +{ + local ns=$1 + local addr=$2 + local flags _flags + local port _port + local dev _dev + local id _id + local nr=2 + + local p + for p in "${@}" + do + if [ $p = "flags" ]; then + eval _flags=\$"$nr" + [ -n "$_flags" ]; flags="flags $_flags" + fi + if [ $p = "dev" ]; then + eval _dev=\$"$nr" + [ -n "$_dev" ]; dev="dev $_dev" + fi + if [ $p = "id" ]; then + eval _id=\$"$nr" + [ -n "$_id" ]; id="id $_id" + fi + if [ $p = "port" ]; then + eval _port=\$"$nr" + [ -n "$_port" ]; port="port $_port" + fi + + nr=$((nr + 1)) + done + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint add $addr ${_flags//","/" "} $dev $id $port + else + ip netns exec $ns ./pm_nl_ctl add $addr $flags $dev $id $port + fi +} + +pm_nl_del_endpoint() +{ + local ns=$1 + local id=$2 + local addr=$3 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint delete id $id $addr + else + ip netns exec $ns ./pm_nl_ctl del $id $addr + fi +} + +pm_nl_flush_endpoint() +{ + local ns=$1 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint flush + else + ip netns exec $ns ./pm_nl_ctl flush + fi +} + +pm_nl_show_endpoints() +{ + local ns=$1 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint show + else + ip netns exec $ns ./pm_nl_ctl dump + fi +} + +pm_nl_change_endpoint() +{ + local ns=$1 + local id=$2 + local flags=$3 + + if [ $ip_mptcp -eq 1 ]; then + ip -n $ns mptcp endpoint change id $id ${flags//","/" "} + else + ip netns exec $ns ./pm_nl_ctl set id $id flags $flags + fi +} + +pm_nl_check_endpoint() +{ + local line expected_line + local need_title=$1 + local msg="$2" + local ns=$3 + local addr=$4 + local _flags="" + local flags + local _port + local port + local dev + local _id + local id + + if [ "${need_title}" = 1 ]; then + printf "%03u %-36s %s" "${TEST_COUNT}" "${TEST_NAME}" "${msg}" + else + printf "%-${nr_blank}s %s" " " "${msg}" + fi + + shift 4 + while [ -n "$1" ]; do + if [ $1 = "flags" ]; then + _flags=$2 + [ -n "$_flags" ]; flags="flags $_flags" + shift + elif [ $1 = "dev" ]; then + [ -n "$2" ]; dev="dev $1" + shift + elif [ $1 = "id" ]; then + _id=$2 + [ -n "$_id" ]; id="id $_id" + shift + elif [ $1 = "port" ]; then + _port=$2 + [ -n "$_port" ]; port=" port $_port" + shift + fi + + shift + done + + if [ -z "$id" ]; then + echo "[skip] bad test - missing endpoint id" + return + fi + + if [ $ip_mptcp -eq 1 ]; then + line=$(ip -n $ns mptcp endpoint show $id) + # the dump order is: address id flags port dev + expected_line="$addr" + [ -n "$addr" ] && expected_line="$expected_line $addr" + expected_line="$expected_line $id" + [ -n "$_flags" ] && expected_line="$expected_line ${_flags//","/" "}" + [ -n "$dev" ] && expected_line="$expected_line $dev" + [ -n "$port" ] && expected_line="$expected_line $port" + else + line=$(ip netns exec $ns ./pm_nl_ctl get $_id) + # the dump order is: id flags dev address port + expected_line="$id" + [ -n "$flags" ] && expected_line="$expected_line $flags" + [ -n "$dev" ] && expected_line="$expected_line $dev" + [ -n "$addr" ] && expected_line="$expected_line $addr" + [ -n "$_port" ] && expected_line="$expected_line $_port" + fi + if [ "$line" = "$expected_line" ]; then + echo "[ ok ]" + else + echo "[fail] expected '$expected_line' found '$line'" + fail_test + fi +} + +filter_tcp_from() +{ + local ns="${1}" + local src="${2}" + local target="${3}" + + ip netns exec "${ns}" iptables -A INPUT -s "${src}" -p tcp -j "${target}" +} + do_transfer() { - listener_ns="$1" - connector_ns="$2" - cl_proto="$3" - srv_proto="$4" - connect_addr="$5" - test_link_fail="$6" - addr_nr_ns1="$7" - addr_nr_ns2="$8" - speed="$9" - bkup="${10}" - - port=$((10000+$TEST_COUNT)) - TEST_COUNT=$((TEST_COUNT+1)) + local listener_ns="$1" + local connector_ns="$2" + local cl_proto="$3" + local srv_proto="$4" + local connect_addr="$5" + local test_link_fail="$6" + local addr_nr_ns1="$7" + local addr_nr_ns2="$8" + local speed="$9" + local sflags="${10}" + + local port=$((10000 + TEST_COUNT - 1)) + local cappid + local userspace_pm=0 + local evts_ns1 + local evts_ns1_pid + local evts_ns2 + local evts_ns2_pid :> "$cout" :> "$sout" :> "$capout" if [ $capture -eq 1 ]; then + local capuser if [ -z $SUDO_USER ] ; then capuser="" else @@ -318,12 +703,64 @@ do_transfer() NSTAT_HISTORY=/tmp/${connector_ns}.nstat ip netns exec ${connector_ns} \ nstat -n + local extra_args if [ $speed = "fast" ]; then - mptcp_connect="./mptcp_connect -j" + extra_args="-j" elif [ $speed = "slow" ]; then - mptcp_connect="./mptcp_connect -r 50" - elif [ $speed = "least" ]; then - mptcp_connect="./mptcp_connect -r 10" + extra_args="-r 50" + elif [[ $speed = "speed_"* ]]; then + extra_args="-r ${speed:6}" + fi + + if [[ "${addr_nr_ns1}" = "userspace_"* ]]; then + userspace_pm=1 + addr_nr_ns1=${addr_nr_ns1:10} + fi + + local flags="subflow" + local extra_cl_args="" + local extra_srv_args="" + local trunc_size="" + if [[ "${addr_nr_ns2}" = "fastclose_"* ]]; then + if [ ${test_link_fail} -le 1 ]; then + echo "fastclose tests need test_link_fail argument" + fail_test + return 1 + fi + + # disconnect + trunc_size=${test_link_fail} + local side=${addr_nr_ns2:10} + + if [ ${side} = "client" ]; then + extra_cl_args="-f ${test_link_fail}" + extra_srv_args="-f -1" + elif [ ${side} = "server" ]; then + extra_srv_args="-f ${test_link_fail}" + extra_cl_args="-f -1" + else + echo "wrong/unknown fastclose spec ${side}" + fail_test + return 1 + fi + addr_nr_ns2=0 + elif [[ "${addr_nr_ns2}" = "userspace_"* ]]; then + userspace_pm=1 + addr_nr_ns2=${addr_nr_ns2:10} + elif [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then + flags="${flags},fullmesh" + addr_nr_ns2=${addr_nr_ns2:9} + fi + + if [ $userspace_pm -eq 1 ]; then + evts_ns1=$(mktemp) + evts_ns2=$(mktemp) + :> "$evts_ns1" + :> "$evts_ns2" + ip netns exec ${listener_ns} ./pm_nl_ctl events >> "$evts_ns1" 2>&1 & + evts_ns1_pid=$! + ip netns exec ${connector_ns} ./pm_nl_ctl events >> "$evts_ns2" 2>&1 & + evts_ns2_pid=$! fi local local_addr @@ -333,43 +770,55 @@ do_transfer() local_addr="0.0.0.0" fi - if [ "$test_link_fail" -eq 2 ];then + extra_srv_args="$extra_args $extra_srv_args" + if [ "$test_link_fail" -gt 1 ];then timeout ${timeout_test} \ ip netns exec ${listener_ns} \ - $mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \ - ${local_addr} < "$sinfail" > "$sout" & + ./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \ + $extra_srv_args ${local_addr} < "$sinfail" > "$sout" & else timeout ${timeout_test} \ ip netns exec ${listener_ns} \ - $mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \ - ${local_addr} < "$sin" > "$sout" & + ./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \ + $extra_srv_args ${local_addr} < "$sin" > "$sout" & fi - spid=$! + local spid=$! wait_local_port_listen "${listener_ns}" "${port}" + extra_cl_args="$extra_args $extra_cl_args" if [ "$test_link_fail" -eq 0 ];then timeout ${timeout_test} \ ip netns exec ${connector_ns} \ - $mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ - $connect_addr < "$cin" > "$cout" & - else + ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ + $extra_cl_args $connect_addr < "$cin" > "$cout" & + elif [ "$test_link_fail" -eq 1 ] || [ "$test_link_fail" -eq 2 ];then ( cat "$cinfail" ; sleep 2; link_failure $listener_ns ; cat "$cinfail" ) | \ tee "$cinsent" | \ timeout ${timeout_test} \ ip netns exec ${connector_ns} \ - $mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ - $connect_addr > "$cout" & + ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ + $extra_cl_args $connect_addr > "$cout" & + else + tee "$cinsent" < "$cinfail" | \ + timeout ${timeout_test} \ + ip netns exec ${connector_ns} \ + ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ + $extra_cl_args $connect_addr > "$cout" & fi - cpid=$! + local cpid=$! # let the mptcp subflow be established in background before # do endpoint manipulation - [ $addr_nr_ns1 = "0" -a $addr_nr_ns2 = "0" ] || sleep 1 + if [ $addr_nr_ns1 != "0" ] || [ $addr_nr_ns2 != "0" ]; then + sleep 1 + fi if [ $addr_nr_ns1 -gt 0 ]; then - let add_nr_ns1=addr_nr_ns1 - counter=2 + local counter=2 + local add_nr_ns1=${addr_nr_ns1} + local id=10 + local tk while [ $add_nr_ns1 -gt 0 ]; do local addr if is_v6 "${connect_addr}"; then @@ -377,47 +826,60 @@ do_transfer() else addr="10.0.$counter.1" fi - ip netns exec $ns1 ./pm_nl_ctl add $addr flags signal - let counter+=1 - let add_nr_ns1-=1 + if [ $userspace_pm -eq 0 ]; then + pm_nl_add_endpoint $ns1 $addr flags signal + else + tk=$(sed -n 's/.*\(token:\)\([[:digit:]]*\).*$/\2/p;q' "$evts_ns1") + ip netns exec ${listener_ns} ./pm_nl_ctl ann $addr token $tk id $id + sleep 1 + ip netns exec ${listener_ns} ./pm_nl_ctl rem token $tk id $id + fi + + counter=$((counter + 1)) + add_nr_ns1=$((add_nr_ns1 - 1)) + id=$((id + 1)) done elif [ $addr_nr_ns1 -lt 0 ]; then - let rm_nr_ns1=-addr_nr_ns1 + local rm_nr_ns1=$((-addr_nr_ns1)) if [ $rm_nr_ns1 -lt 8 ]; then - counter=1 - pos=1 - dump=(`ip netns exec ${listener_ns} ./pm_nl_ctl dump`) - if [ ${#dump[@]} -gt 0 ]; then - while [ $counter -le $rm_nr_ns1 ] - do - id=${dump[$pos]} - rm_addr=$(rm_addr_count ${connector_ns}) - ip netns exec ${listener_ns} ./pm_nl_ctl del $id - wait_rm_addr ${connector_ns} ${rm_addr} - let counter+=1 - let pos+=5 + local counter=0 + local line + pm_nl_show_endpoints ${listener_ns} | while read -r line; do + # shellcheck disable=SC2206 # we do want to split per word + local arr=($line) + local nr=0 + + local i + for i in "${arr[@]}"; do + if [ $i = "id" ]; then + if [ $counter -eq $rm_nr_ns1 ]; then + break + fi + id=${arr[$nr+1]} + rm_addr=$(rm_addr_count ${connector_ns}) + pm_nl_del_endpoint ${listener_ns} $id + wait_rm_addr ${connector_ns} ${rm_addr} + counter=$((counter + 1)) + fi + nr=$((nr + 1)) done - fi + done elif [ $rm_nr_ns1 -eq 8 ]; then - ip netns exec ${listener_ns} ./pm_nl_ctl flush + pm_nl_flush_endpoint ${listener_ns} elif [ $rm_nr_ns1 -eq 9 ]; then - ip netns exec ${listener_ns} ./pm_nl_ctl del 0 ${connect_addr} + pm_nl_del_endpoint ${listener_ns} 0 ${connect_addr} fi fi - flags="subflow" - if [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then - flags="${flags},fullmesh" - addr_nr_ns2=${addr_nr_ns2:9} - fi - # if newly added endpoints must be deleted, give the background msk # some time to created them - [ $addr_nr_ns1 -gt 0 -a $addr_nr_ns2 -lt 0 ] && sleep 1 + [ $addr_nr_ns1 -gt 0 ] && [ $addr_nr_ns2 -lt 0 ] && sleep 1 if [ $addr_nr_ns2 -gt 0 ]; then - let add_nr_ns2=addr_nr_ns2 - counter=3 + local add_nr_ns2=${addr_nr_ns2} + local counter=3 + local id=20 + local tk da dp sp while [ $add_nr_ns2 -gt 0 ]; do local addr if is_v6 "${connect_addr}"; then @@ -425,30 +887,54 @@ do_transfer() else addr="10.0.$counter.2" fi - ip netns exec $ns2 ./pm_nl_ctl add $addr flags $flags - let counter+=1 - let add_nr_ns2-=1 + if [ $userspace_pm -eq 0 ]; then + pm_nl_add_endpoint $ns2 $addr flags $flags + else + tk=$(sed -n 's/.*\(token:\)\([[:digit:]]*\).*$/\2/p;q' "$evts_ns2") + da=$(sed -n 's/.*\(daddr4:\)\([0-9.]*\).*$/\2/p;q' "$evts_ns2") + dp=$(sed -n 's/.*\(dport:\)\([[:digit:]]*\).*$/\2/p;q' "$evts_ns2") + ip netns exec ${connector_ns} ./pm_nl_ctl csf lip $addr lid $id \ + rip $da rport $dp token $tk + sleep 1 + sp=$(grep "type:10" "$evts_ns2" | + sed -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q') + ip netns exec ${connector_ns} ./pm_nl_ctl dsf lip $addr lport $sp \ + rip $da rport $dp token $tk + fi + counter=$((counter + 1)) + add_nr_ns2=$((add_nr_ns2 - 1)) + id=$((id + 1)) done elif [ $addr_nr_ns2 -lt 0 ]; then - let rm_nr_ns2=-addr_nr_ns2 + local rm_nr_ns2=$((-addr_nr_ns2)) if [ $rm_nr_ns2 -lt 8 ]; then - counter=1 - pos=1 - dump=(`ip netns exec ${connector_ns} ./pm_nl_ctl dump`) - if [ ${#dump[@]} -gt 0 ]; then - while [ $counter -le $rm_nr_ns2 ] - do - # rm_addr are serialized, allow the previous one to complete - id=${dump[$pos]} - rm_addr=$(rm_addr_count ${listener_ns}) - ip netns exec ${connector_ns} ./pm_nl_ctl del $id - wait_rm_addr ${listener_ns} ${rm_addr} - let counter+=1 - let pos+=5 + local counter=0 + local line + pm_nl_show_endpoints ${connector_ns} | while read -r line; do + # shellcheck disable=SC2206 # we do want to split per word + local arr=($line) + local nr=0 + + local i + for i in "${arr[@]}"; do + if [ $i = "id" ]; then + if [ $counter -eq $rm_nr_ns2 ]; then + break + fi + local id rm_addr + # rm_addr are serialized, allow the previous one to + # complete + id=${arr[$nr+1]} + rm_addr=$(rm_addr_count ${listener_ns}) + pm_nl_del_endpoint ${connector_ns} $id + wait_rm_addr ${listener_ns} ${rm_addr} + counter=$((counter + 1)) + fi + nr=$((nr + 1)) done - fi + done elif [ $rm_nr_ns2 -eq 8 ]; then - ip netns exec ${connector_ns} ./pm_nl_ctl flush + pm_nl_flush_endpoint ${connector_ns} elif [ $rm_nr_ns2 -eq 9 ]; then local addr if is_v6 "${connect_addr}"; then @@ -456,32 +942,50 @@ do_transfer() else addr="10.0.1.2" fi - ip netns exec ${connector_ns} ./pm_nl_ctl del 0 $addr + pm_nl_del_endpoint ${connector_ns} 0 $addr fi fi - if [ ! -z $bkup ]; then + if [ -n "${sflags}" ]; then sleep 1 + + local netns for netns in "$ns1" "$ns2"; do - dump=(`ip netns exec $netns ./pm_nl_ctl dump`) - if [ ${#dump[@]} -gt 0 ]; then - addr=${dump[${#dump[@]} - 1]} - backup="ip netns exec $netns ./pm_nl_ctl set $addr flags $bkup" - $backup - fi + local line + pm_nl_show_endpoints $netns | while read -r line; do + # shellcheck disable=SC2206 # we do want to split per word + local arr=($line) + local nr=0 + local id + + local i + for i in "${arr[@]}"; do + if [ $i = "id" ]; then + id=${arr[$nr+1]} + fi + nr=$((nr + 1)) + done + pm_nl_change_endpoint $netns $id $sflags + done done fi wait $cpid - retc=$? + local retc=$? wait $spid - rets=$? + local rets=$? if [ $capture -eq 1 ]; then sleep 1 kill $cappid fi + if [ $userspace_pm -eq 1 ]; then + kill_wait $evts_ns1_pid + kill_wait $evts_ns2_pid + rm -rf $evts_ns1 $evts_ns2 + fi + NSTAT_HISTORY=/tmp/${listener_ns}.nstat ip netns exec ${listener_ns} \ nstat | grep Tcp > /tmp/${listener_ns}.out NSTAT_HISTORY=/tmp/${connector_ns}.nstat ip netns exec ${connector_ns} \ @@ -497,20 +1001,20 @@ do_transfer() cat /tmp/${connector_ns}.out cat "$capout" - ret=1 + fail_test return 1 fi - if [ "$test_link_fail" -eq 2 ];then - check_transfer $sinfail $cout "file received by client" + if [ "$test_link_fail" -gt 1 ];then + check_transfer $sinfail $cout "file received by client" $trunc_size else - check_transfer $sin $cout "file received by client" + check_transfer $sin $cout "file received by client" $trunc_size fi retc=$? if [ "$test_link_fail" -eq 0 ];then - check_transfer $cin $sout "file received by server" + check_transfer $cin $sout "file received by server" $trunc_size else - check_transfer $cinsent $sout "file received by server" + check_transfer $cinsent $sout "file received by server" $trunc_size fi rets=$? @@ -525,9 +1029,9 @@ do_transfer() make_file() { - name=$1 - who=$2 - size=$3 + local name=$1 + local who=$2 + local size=$3 dd if=/dev/urandom of="$name" bs=1024 count=$size 2> /dev/null echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name" @@ -537,33 +1041,49 @@ make_file() run_tests() { - listener_ns="$1" - connector_ns="$2" - connect_addr="$3" - test_linkfail="${4:-0}" - addr_nr_ns1="${5:-0}" - addr_nr_ns2="${6:-0}" - speed="${7:-fast}" - bkup="${8:-""}" - lret=0 - oldin="" - + local listener_ns="$1" + local connector_ns="$2" + local connect_addr="$3" + local test_linkfail="${4:-0}" + local addr_nr_ns1="${5:-0}" + local addr_nr_ns2="${6:-0}" + local speed="${7:-fast}" + local sflags="${8:-""}" + + local size + + # The values above 2 are reused to make test files + # with the given sizes (KB) + if [ "$test_linkfail" -gt 2 ]; then + size=$test_linkfail + + if [ -z "$cinfail" ]; then + cinfail=$(mktemp) + fi + make_file "$cinfail" "client" $size # create the input file for the failure test when # the first failure test run - if [ "$test_linkfail" -ne 0 -a -z "$cinfail" ]; then + elif [ "$test_linkfail" -ne 0 ] && [ -z "$cinfail" ]; then # the client file must be considerably larger # of the maximum expected cwin value, or the # link utilization will be not predicable size=$((RANDOM%2)) size=$((size+1)) size=$((size*8192)) - size=$((size + ( $RANDOM % 8192) )) + size=$((size + ( RANDOM % 8192) )) cinfail=$(mktemp) make_file "$cinfail" "client" $size fi - if [ "$test_linkfail" -eq 2 -a -z "$sinfail" ]; then + if [ "$test_linkfail" -gt 2 ]; then + size=$test_linkfail + + if [ -z "$sinfail" ]; then + sinfail=$(mktemp) + fi + make_file "$sinfail" "server" $size + elif [ "$test_linkfail" -eq 2 ] && [ -z "$sinfail" ]; then size=$((RANDOM%16)) size=$((size+1)) size=$((size*2048)) @@ -573,8 +1093,7 @@ run_tests() fi do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} \ - ${test_linkfail} ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${bkup} - lret=$? + ${test_linkfail} ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${sflags} } dump_stats() @@ -587,62 +1106,233 @@ dump_stats() chk_csum_nr() { - local msg=${1:-""} + local csum_ns1=${1:-0} + local csum_ns2=${2:-0} local count local dump_stats + local extra_msg="" + local allow_multi_errors_ns1=0 + local allow_multi_errors_ns2=0 - if [ ! -z "$msg" ]; then - printf "%02u" "$TEST_COUNT" - else - echo -n " " + if [[ "${csum_ns1}" = "+"* ]]; then + allow_multi_errors_ns1=1 + csum_ns1=${csum_ns1:1} fi - printf " %-36s %s" "$msg" "sum" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}'` + if [[ "${csum_ns2}" = "+"* ]]; then + allow_multi_errors_ns2=1 + csum_ns2=${csum_ns2:1} + fi + + printf "%-${nr_blank}s %s" " " "sum" + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}') [ -z "$count" ] && count=0 - if [ "$count" != 0 ]; then - echo "[fail] got $count data checksum error[s] expected 0" - ret=1 + if [ "$count" != "$csum_ns1" ]; then + extra_msg="$extra_msg ns1=$count" + fi + if { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } || + { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then + echo "[fail] got $count data checksum error[s] expected $csum_ns1" + fail_test dump_stats=1 else echo -n "[ ok ]" fi echo -n " - csum " - count=`ip netns exec $ns2 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}'` + count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}') [ -z "$count" ] && count=0 - if [ "$count" != 0 ]; then - echo "[fail] got $count data checksum error[s] expected 0" - ret=1 + if [ "$count" != "$csum_ns2" ]; then + extra_msg="$extra_msg ns2=$count" + fi + if { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } || + { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then + echo "[fail] got $count data checksum error[s] expected $csum_ns2" + fail_test dump_stats=1 else - echo "[ ok ]" + echo -n "[ ok ]" fi [ "${dump_stats}" = 1 ] && dump_stats + + echo "$extra_msg" } chk_fail_nr() { - local mp_fail_nr_tx=$1 - local mp_fail_nr_rx=$2 + local fail_tx=$1 + local fail_rx=$2 + local ns_invert=${3:-""} local count local dump_stats + local ns_tx=$ns1 + local ns_rx=$ns2 + local extra_msg="" + local allow_tx_lost=0 + local allow_rx_lost=0 + + if [[ $ns_invert = "invert" ]]; then + ns_tx=$ns2 + ns_rx=$ns1 + extra_msg=" invert" + fi - printf "%-39s %s" " " "ftx" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPFailTx | awk '{print $2}'` + if [[ "${fail_tx}" = "-"* ]]; then + allow_tx_lost=1 + fail_tx=${fail_tx:1} + fi + if [[ "${fail_rx}" = "-"* ]]; then + allow_rx_lost=1 + fail_rx=${fail_rx:1} + fi + + printf "%-${nr_blank}s %s" " " "ftx" + count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFailTx | awk '{print $2}') [ -z "$count" ] && count=0 - if [ "$count" != "$mp_fail_nr_tx" ]; then - echo "[fail] got $count MP_FAIL[s] TX expected $mp_fail_nr_tx" - ret=1 + if [ "$count" != "$fail_tx" ]; then + extra_msg="$extra_msg,tx=$count" + fi + if { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } || + { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then + echo "[fail] got $count MP_FAIL[s] TX expected $fail_tx" + fail_test dump_stats=1 else echo -n "[ ok ]" fi - echo -n " - frx " - count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPFailRx | awk '{print $2}'` + echo -n " - failrx" + count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFailRx | awk '{print $2}') [ -z "$count" ] && count=0 - if [ "$count" != "$mp_fail_nr_rx" ]; then - echo "[fail] got $count MP_FAIL[s] RX expected $mp_fail_nr_rx" - ret=1 + if [ "$count" != "$fail_rx" ]; then + extra_msg="$extra_msg,rx=$count" + fi + if { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } || + { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then + echo "[fail] got $count MP_FAIL[s] RX expected $fail_rx" + fail_test + dump_stats=1 + else + echo -n "[ ok ]" + fi + + [ "${dump_stats}" = 1 ] && dump_stats + + echo "$extra_msg" +} + +chk_fclose_nr() +{ + local fclose_tx=$1 + local fclose_rx=$2 + local ns_invert=$3 + local count + local dump_stats + local ns_tx=$ns2 + local ns_rx=$ns1 + local extra_msg=" " + + if [[ $ns_invert = "invert" ]]; then + ns_tx=$ns1 + ns_rx=$ns2 + extra_msg=${extra_msg}"invert" + fi + + printf "%-${nr_blank}s %s" " " "ctx" + count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}') + [ -z "$count" ] && count=0 + [ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count" + if [ "$count" != "$fclose_tx" ]; then + echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx" + fail_test + dump_stats=1 + else + echo -n "[ ok ]" + fi + + echo -n " - fclzrx" + count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}') + [ -z "$count" ] && count=0 + [ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count" + if [ "$count" != "$fclose_rx" ]; then + echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx" + fail_test + dump_stats=1 + else + echo -n "[ ok ]" + fi + + [ "${dump_stats}" = 1 ] && dump_stats + + echo "$extra_msg" +} + +chk_rst_nr() +{ + local rst_tx=$1 + local rst_rx=$2 + local ns_invert=${3:-""} + local count + local dump_stats + local ns_tx=$ns1 + local ns_rx=$ns2 + local extra_msg="" + + if [[ $ns_invert = "invert" ]]; then + ns_tx=$ns2 + ns_rx=$ns1 + extra_msg=" invert" + fi + + printf "%-${nr_blank}s %s" " " "rtx" + count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}') + [ -z "$count" ] && count=0 + if [ $count -lt $rst_tx ]; then + echo "[fail] got $count MP_RST[s] TX expected $rst_tx" + fail_test + dump_stats=1 + else + echo -n "[ ok ]" + fi + + echo -n " - rstrx " + count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}') + [ -z "$count" ] && count=0 + if [ "$count" -lt "$rst_rx" ]; then + echo "[fail] got $count MP_RST[s] RX expected $rst_rx" + fail_test + dump_stats=1 + else + echo -n "[ ok ]" + fi + + [ "${dump_stats}" = 1 ] && dump_stats + + echo "$extra_msg" +} + +chk_infi_nr() +{ + local infi_tx=$1 + local infi_rx=$2 + local count + local dump_stats + + printf "%-${nr_blank}s %s" " " "itx" + count=$(ip netns exec $ns2 nstat -as | grep InfiniteMapTx | awk '{print $2}') + [ -z "$count" ] && count=0 + if [ "$count" != "$infi_tx" ]; then + echo "[fail] got $count infinite map[s] TX expected $infi_tx" + fail_test + dump_stats=1 + else + echo -n "[ ok ]" + fi + + echo -n " - infirx" + count=$(ip netns exec $ns1 nstat -as | grep InfiniteMapRx | awk '{print $2}') + [ -z "$count" ] && count=0 + if [ "$count" != "$infi_rx" ]; then + echo "[fail] got $count infinite map[s] RX expected $infi_rx" + fail_test dump_stats=1 else echo "[ ok ]" @@ -653,49 +1343,70 @@ chk_fail_nr() chk_join_nr() { - local msg="$1" - local syn_nr=$2 - local syn_ack_nr=$3 - local ack_nr=$4 + local syn_nr=$1 + local syn_ack_nr=$2 + local ack_nr=$3 + local csum_ns1=${4:-0} + local csum_ns2=${5:-0} + local fail_nr=${6:-0} + local rst_nr=${7:-0} + local infi_nr=${8:-0} + local corrupted_pkts=${9:-0} local count local dump_stats + local with_cookie + local title="${TEST_NAME}" + + if [ "${corrupted_pkts}" -gt 0 ]; then + title+=": ${corrupted_pkts} corrupted pkts" + fi - printf "%02u %-36s %s" "$TEST_COUNT" "$msg" "syn" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}'` + printf "%03u %-36s %s" "${TEST_COUNT}" "${title}" "syn" + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$syn_nr" ]; then echo "[fail] got $count JOIN[s] syn expected $syn_nr" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" fi echo -n " - synack" - count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}'` + with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies) + count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$syn_ack_nr" ]; then - echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr" - ret=1 - dump_stats=1 + # simult connections exceeding the limit with cookie enabled could go up to + # synack validation as the conn limit can be enforced reliably only after + # the subflow creation + if [ "$with_cookie" = 2 ] && [ "$count" -gt "$syn_ack_nr" ] && [ "$count" -le "$syn_nr" ]; then + echo -n "[ ok ]" + else + echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr" + fail_test + dump_stats=1 + fi else echo -n "[ ok ]" fi echo -n " - ack" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}'` + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$ack_nr" ]; then echo "[fail] got $count JOIN[s] ack expected $ack_nr" - ret=1 + fail_test dump_stats=1 else echo "[ ok ]" fi [ "${dump_stats}" = 1 ] && dump_stats - if [ $checksum -eq 1 ]; then - chk_csum_nr - chk_fail_nr 0 0 + if [ $validate_checksum -eq 1 ]; then + chk_csum_nr $csum_ns1 $csum_ns2 + chk_fail_nr $fail_nr $fail_nr + chk_rst_nr $rst_nr $rst_nr + chk_infi_nr $infi_nr $infi_nr fi } @@ -714,19 +1425,19 @@ chk_stale_nr() local stale_nr local recover_nr - printf "%-39s %-18s" " " "stale" - stale_nr=`ip netns exec $ns nstat -as | grep MPTcpExtSubflowStale | awk '{print $2}'` + printf "%-${nr_blank}s %-18s" " " "stale" + stale_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowStale | awk '{print $2}') [ -z "$stale_nr" ] && stale_nr=0 - recover_nr=`ip netns exec $ns nstat -as | grep MPTcpExtSubflowRecover | awk '{print $2}'` + recover_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowRecover | awk '{print $2}') [ -z "$recover_nr" ] && recover_nr=0 if [ $stale_nr -lt $stale_min ] || - [ $stale_max -gt 0 -a $stale_nr -gt $stale_max ] || - [ $((stale_nr - $recover_nr)) -ne $stale_delta ]; then + { [ $stale_max -gt 0 ] && [ $stale_nr -gt $stale_max ]; } || + [ $((stale_nr - recover_nr)) -ne $stale_delta ]; then echo "[fail] got $stale_nr stale[s] $recover_nr recover[s], " \ " expected stale in range [$stale_min..$stale_max]," \ " stale-recover delta $stale_delta " - ret=1 + fail_test dump_stats=1 else echo "[ ok ]" @@ -751,24 +1462,30 @@ chk_add_nr() local mis_ack_nr=${8:-0} local count local dump_stats + local timeout - printf "%-39s %s" " " "add" - count=`ip netns exec $ns2 nstat -as | grep MPTcpExtAddAddr | awk '{print $2}'` + timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout) + + printf "%-${nr_blank}s %s" " " "add" + count=$(ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}') [ -z "$count" ] && count=0 - if [ "$count" != "$add_nr" ]; then + + # if the test configured a short timeout tolerate greater then expected + # add addrs options, due to retransmissions + if [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then echo "[fail] got $count ADD_ADDR[s] expected $add_nr" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" fi echo -n " - echo " - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtEchoAdd | awk '{print $2}'` + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtEchoAdd | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$echo_nr" ]; then echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" @@ -776,76 +1493,76 @@ chk_add_nr() if [ $port_nr -gt 0 ]; then echo -n " - pt " - count=`ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}'` + count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$port_nr" ]; then echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr" - ret=1 + fail_test dump_stats=1 else echo "[ ok ]" fi - printf "%-39s %s" " " "syn" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortSynRx | - awk '{print $2}'` + printf "%-${nr_blank}s %s" " " "syn" + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortSynRx | + awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$syn_nr" ]; then echo "[fail] got $count JOIN[s] syn with a different \ port-number expected $syn_nr" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" fi echo -n " - synack" - count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinPortSynAckRx | - awk '{print $2}'` + count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinPortSynAckRx | + awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$syn_ack_nr" ]; then echo "[fail] got $count JOIN[s] synack with a different \ port-number expected $syn_ack_nr" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" fi echo -n " - ack" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortAckRx | - awk '{print $2}'` + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortAckRx | + awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$ack_nr" ]; then echo "[fail] got $count JOIN[s] ack with a different \ port-number expected $ack_nr" - ret=1 + fail_test dump_stats=1 else echo "[ ok ]" fi - printf "%-39s %s" " " "syn" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortSynRx | - awk '{print $2}'` + printf "%-${nr_blank}s %s" " " "syn" + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortSynRx | + awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$mis_syn_nr" ]; then echo "[fail] got $count JOIN[s] syn with a mismatched \ port-number expected $mis_syn_nr" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" fi echo -n " - ack " - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortAckRx | - awk '{print $2}'` + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortAckRx | + awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$mis_ack_nr" ]; then echo "[fail] got $count JOIN[s] ack with a mismatched \ port-number expected $mis_ack_nr" - ret=1 + fail_test dump_stats=1 else echo "[ ok ]" @@ -861,43 +1578,75 @@ chk_rm_nr() { local rm_addr_nr=$1 local rm_subflow_nr=$2 - local invert=${3:-""} + local invert + local simult local count local dump_stats - local addr_ns - local subflow_ns + local addr_ns=$ns1 + local subflow_ns=$ns2 + local extra_msg="" + + shift 2 + while [ -n "$1" ]; do + [ "$1" = "invert" ] && invert=true + [ "$1" = "simult" ] && simult=true + shift + done if [ -z $invert ]; then addr_ns=$ns1 subflow_ns=$ns2 - elif [ $invert = "invert" ]; then + elif [ $invert = "true" ]; then addr_ns=$ns2 subflow_ns=$ns1 + extra_msg=" invert" fi - printf "%-39s %s" " " "rm " - count=`ip netns exec $addr_ns nstat -as | grep MPTcpExtRmAddr | awk '{print $2}'` + printf "%-${nr_blank}s %s" " " "rm " + count=$(ip netns exec $addr_ns nstat -as | grep MPTcpExtRmAddr | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$rm_addr_nr" ]; then echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" fi - echo -n " - sf " - count=`ip netns exec $subflow_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}'` + echo -n " - rmsf " + count=$(ip netns exec $subflow_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}') [ -z "$count" ] && count=0 + if [ -n "$simult" ]; then + local cnt suffix + + cnt=$(ip netns exec $addr_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}') + + # in case of simult flush, the subflow removal count on each side is + # unreliable + [ -z "$cnt" ] && cnt=0 + count=$((count + cnt)) + [ "$count" != "$rm_subflow_nr" ] && suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]" + if [ $count -ge "$rm_subflow_nr" ] && \ + [ "$count" -le "$((rm_subflow_nr *2 ))" ]; then + echo "[ ok ] $suffix" + else + echo "[fail] got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]" + fail_test + dump_stats=1 + fi + return + fi if [ "$count" != "$rm_subflow_nr" ]; then echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr" - ret=1 + fail_test dump_stats=1 else - echo "[ ok ]" + echo -n "[ ok ]" fi [ "${dump_stats}" = 1 ] && dump_stats + + echo "$extra_msg" } chk_prio_nr() @@ -907,23 +1656,23 @@ chk_prio_nr() local count local dump_stats - printf "%-39s %s" " " "ptx" - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}'` + printf "%-${nr_blank}s %s" " " "ptx" + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$mp_prio_nr_tx" ]; then echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx" - ret=1 + fail_test dump_stats=1 else echo -n "[ ok ]" fi echo -n " - prx " - count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}'` + count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}') [ -z "$count" ] && count=0 if [ "$count" != "$mp_prio_nr_rx" ]; then echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx" - ret=1 + fail_test dump_stats=1 else echo "[ ok ]" @@ -932,35 +1681,66 @@ chk_prio_nr() [ "${dump_stats}" = 1 ] && dump_stats } +chk_subflow_nr() +{ + local need_title="$1" + local msg="$2" + local subflow_nr=$3 + local cnt1 + local cnt2 + + if [ -n "${need_title}" ]; then + printf "%03u %-36s %s" "${TEST_COUNT}" "${TEST_NAME}" "${msg}" + else + printf "%-${nr_blank}s %s" " " "${msg}" + fi + + cnt1=$(ss -N $ns1 -tOni | grep -c token) + cnt2=$(ss -N $ns2 -tOni | grep -c token) + if [ "$cnt1" != "$subflow_nr" -o "$cnt2" != "$subflow_nr" ]; then + echo "[fail] got $cnt1:$cnt2 subflows expected $subflow_nr" + fail_test + dump_stats=1 + else + echo "[ ok ]" + fi + + [ "${dump_stats}" = 1 ] && ( ss -N $ns1 -tOni ; ss -N $ns1 -tOni | grep token; ip -n $ns1 mptcp endpoint ) +} + chk_link_usage() { local ns=$1 local link=$2 local out=$3 local expected_rate=$4 - local tx_link=`ip netns exec $ns cat /sys/class/net/$link/statistics/tx_bytes` - local tx_total=`ls -l $out | awk '{print $5}'` - local tx_rate=$((tx_link * 100 / $tx_total)) + + local tx_link tx_total + tx_link=$(ip netns exec $ns cat /sys/class/net/$link/statistics/tx_bytes) + tx_total=$(stat --format=%s $out) + local tx_rate=$((tx_link * 100 / tx_total)) local tolerance=5 - printf "%-39s %-18s" " " "link usage" - if [ $tx_rate -lt $((expected_rate - $tolerance)) -o \ - $tx_rate -gt $((expected_rate + $tolerance)) ]; then + printf "%-${nr_blank}s %-18s" " " "link usage" + if [ $tx_rate -lt $((expected_rate - tolerance)) ] || \ + [ $tx_rate -gt $((expected_rate + tolerance)) ]; then echo "[fail] got $tx_rate% usage, expected $expected_rate%" - ret=1 + fail_test else echo "[ ok ]" fi } -wait_for_tw() +wait_attempt_fail() { local timeout_ms=$((timeout_poll * 1000)) local time=0 local ns=$1 while [ $time -lt $timeout_ms ]; do - local cnt=$(ip netns exec $ns ss -t state time-wait |wc -l) + local cnt + + cnt=$(ip netns exec $ns nstat -as TcpAttemptFails | grep TcpAttemptFails | awk '{print $2}') [ "$cnt" = 1 ] && return 1 time=$((time + 100)) @@ -969,875 +1749,1007 @@ wait_for_tw() return 1 } +set_userspace_pm() +{ + local ns=$1 + + ip netns exec $ns sysctl -q net.mptcp.pm_type=1 +} + subflows_tests() { - reset - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "no JOIN" "0" "0" "0" + if reset "no JOIN"; then + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # subflow limited by client - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 0 - ip netns exec $ns2 ./pm_nl_ctl limits 0 0 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow, limited by client" 0 0 0 + if reset "single subflow, limited by client"; then + pm_nl_set_limits $ns1 0 0 + pm_nl_set_limits $ns2 0 0 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # subflow limited by server - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 0 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow, limited by server" 1 1 0 + if reset "single subflow, limited by server"; then + pm_nl_set_limits $ns1 0 0 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 0 + fi # subflow - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow" 1 1 1 + if reset "single subflow"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + fi # multiple subflows - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "multiple subflows" 2 2 2 + if reset "multiple subflows"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + fi # multiple subflows limited by server - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "multiple subflows, limited by server" 2 2 1 + if reset "multiple subflows, limited by server"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 1 + fi # single subflow, dev - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow dev ns2eth3 - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow, dev" 1 1 1 + if reset "single subflow, dev"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow dev ns2eth3 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + fi } subflows_error_tests() { # If a single subflow is configured, and matches the MPC src # address, no additional subflow should be created - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.1.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow - chk_join_nr "no MPC reuse with single endpoint" 0 0 0 + if reset "no MPC reuse with single endpoint"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr 0 0 0 + fi # multiple subflows, with subflow creation error - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT - run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow - chk_join_nr "multi subflows, with failing subflow" 1 1 1 + if reset "multi subflows, with failing subflow"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + filter_tcp_from $ns1 10.0.3.2 REJECT + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr 1 1 1 + fi # multiple subflows, with subflow timeout on MPJ - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j DROP - run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow - chk_join_nr "multi subflows, with subflow timeout" 1 1 1 + if reset "multi subflows, with subflow timeout"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + filter_tcp_from $ns1 10.0.3.2 DROP + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr 1 1 1 + fi # multiple subflows, check that the endpoint corresponding to # closed subflow (due to reset) is not reused if additional # subflows are added later - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns1 iptables -A INPUT -s 10.0.3.2 -p tcp -j REJECT - run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow & - - # updates in the child shell do not have any effect here, we - # need to bump the test counter for the above case - TEST_COUNT=$((TEST_COUNT+1)) - - # mpj subflow will be in TW after the reset - wait_for_tw $ns2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - wait - - # additional subflow could be created only if the PM select - # the later endpoint, skipping the already used one - chk_join_nr "multi subflows, fair usage on close" 1 1 1 + if reset "multi subflows, fair usage on close"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + filter_tcp_from $ns1 10.0.3.2 REJECT + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow & + + # mpj subflow will be in TW after the reset + wait_attempt_fail $ns2 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + wait + + # additional subflow could be created only if the PM select + # the later endpoint, skipping the already used one + chk_join_nr 1 1 1 + fi } signal_address_tests() { # add_address, unused - reset - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "unused signal address" 0 0 0 - chk_add_nr 1 1 + if reset "unused signal address"; then + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + chk_add_nr 1 1 + fi # accept and use add_addr - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal address" 1 1 1 - chk_add_nr 1 1 + if reset "signal address"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # accept and use add_addr with an additional subflow # note: signal address in server ns and local addresses in client ns must # belong to different subnets or one of the listed local address could be # used for 'add_addr' subflow - reset - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "subflow and signal" 2 2 2 - chk_add_nr 1 1 + if reset "subflow and signal"; then + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + chk_add_nr 1 1 + fi # accept and use add_addr with additional subflows - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "multiple subflows and signal" 3 3 3 - chk_add_nr 1 1 + if reset "multiple subflows and signal"; then + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 3 3 3 + chk_add_nr 1 1 + fi # signal addresses - reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal addresses" 3 3 3 - chk_add_nr 3 3 + if reset "signal addresses"; then + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_set_limits $ns2 3 3 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 3 3 3 + chk_add_nr 3 3 + fi # signal invalid addresses - reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal invalid addresses" 1 1 1 - chk_add_nr 3 3 + if reset "signal invalid addresses"; then + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_set_limits $ns2 3 3 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 3 3 + fi # signal addresses race test - reset - ip netns exec $ns1 ./pm_nl_ctl limits 4 4 - ip netns exec $ns2 ./pm_nl_ctl limits 4 4 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.1.2 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags signal - run_tests $ns1 $ns2 10.0.1.1 - - # the server will not signal the address terminating - # the MPC subflow - chk_add_nr 3 3 + if reset "signal addresses race test"; then + pm_nl_set_limits $ns1 4 4 + pm_nl_set_limits $ns2 4 4 + pm_nl_add_endpoint $ns1 10.0.1.1 flags signal + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_add_endpoint $ns2 10.0.1.2 flags signal + pm_nl_add_endpoint $ns2 10.0.2.2 flags signal + pm_nl_add_endpoint $ns2 10.0.3.2 flags signal + pm_nl_add_endpoint $ns2 10.0.4.2 flags signal + + # the peer could possibly miss some addr notification, allow retransmission + ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1 + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr 3 3 3 + + # the server will not signal the address terminating + # the MPC subflow + chk_add_nr 3 3 + fi } link_failure_tests() { # accept and use add_addr with additional subflows and link loss - reset - - # without any b/w limit each veth could spool the packets and get - # them acked at xmit time, so that the corresponding subflow will - # have almost always no outstanding pkts, the scheduler will pick - # always the first subflow and we will have hard time testing - # active backup and link switch-over. - # Let's set some arbitrary (low) virtual link limits. - init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 dev ns2eth4 flags subflow - run_tests $ns1 $ns2 10.0.1.1 1 - chk_join_nr "multiple flows, signal, link failure" 3 3 3 - chk_add_nr 1 1 - chk_stale_nr $ns2 1 5 1 + if reset "multiple flows, signal, link failure"; then + # without any b/w limit each veth could spool the packets and get + # them acked at xmit time, so that the corresponding subflow will + # have almost always no outstanding pkts, the scheduler will pick + # always the first subflow and we will have hard time testing + # active backup and link switch-over. + # Let's set some arbitrary (low) virtual link limits. + init_shapers + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow + run_tests $ns1 $ns2 10.0.1.1 1 + chk_join_nr 3 3 3 + chk_add_nr 1 1 + chk_stale_nr $ns2 1 5 1 + fi # accept and use add_addr with additional subflows and link loss # for bidirectional transfer - reset - init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 dev ns2eth4 flags subflow - run_tests $ns1 $ns2 10.0.1.1 2 - chk_join_nr "multi flows, signal, bidi, link fail" 3 3 3 - chk_add_nr 1 1 - chk_stale_nr $ns2 1 -1 1 + if reset "multi flows, signal, bidi, link fail"; then + init_shapers + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 dev ns2eth4 flags subflow + run_tests $ns1 $ns2 10.0.1.1 2 + chk_join_nr 3 3 3 + chk_add_nr 1 1 + chk_stale_nr $ns2 1 -1 1 + fi # 2 subflows plus 1 backup subflow with a lossy link, backup # will never be used - reset - init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - export FAILING_LINKS="1" - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup - run_tests $ns1 $ns2 10.0.1.1 1 - chk_join_nr "backup subflow unused, link failure" 2 2 2 - chk_add_nr 1 1 - chk_link_usage $ns2 ns2eth3 $cinsent 0 + if reset "backup subflow unused, link failure"; then + init_shapers + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 2 + FAILING_LINKS="1" + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup + run_tests $ns1 $ns2 10.0.1.1 1 + chk_join_nr 2 2 2 + chk_add_nr 1 1 + chk_link_usage $ns2 ns2eth3 $cinsent 0 + fi # 2 lossy links after half transfer, backup will get half of # the traffic - reset - init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup - export FAILING_LINKS="1 2" - run_tests $ns1 $ns2 10.0.1.1 1 - chk_join_nr "backup flow used, multi links fail" 2 2 2 - chk_add_nr 1 1 - chk_stale_nr $ns2 2 4 2 - chk_link_usage $ns2 ns2eth3 $cinsent 50 + if reset "backup flow used, multi links fail"; then + init_shapers + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup + FAILING_LINKS="1 2" + run_tests $ns1 $ns2 10.0.1.1 1 + chk_join_nr 2 2 2 + chk_add_nr 1 1 + chk_stale_nr $ns2 2 4 2 + chk_link_usage $ns2 ns2eth3 $cinsent 50 + fi # use a backup subflow with the first subflow on a lossy link # for bidirectional transfer - reset - init_shapers - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 dev ns2eth3 flags subflow,backup - run_tests $ns1 $ns2 10.0.1.1 2 - chk_join_nr "backup flow used, bidi, link failure" 2 2 2 - chk_add_nr 1 1 - chk_stale_nr $ns2 1 -1 2 - chk_link_usage $ns2 ns2eth3 $cinsent 50 + if reset "backup flow used, bidi, link failure"; then + init_shapers + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 dev ns1eth2 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 dev ns2eth3 flags subflow,backup + FAILING_LINKS="1 2" + run_tests $ns1 $ns2 10.0.1.1 2 + chk_join_nr 2 2 2 + chk_add_nr 1 1 + chk_stale_nr $ns2 1 -1 2 + chk_link_usage $ns2 ns2eth3 $cinsent 50 + fi } add_addr_timeout_tests() { # add_addr timeout - reset_with_add_addr_timeout - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow - chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1 - chk_add_nr 4 0 + if reset_with_add_addr_timeout "signal address, ADD_ADDR timeout"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr 1 1 1 + chk_add_nr 4 0 + fi # add_addr timeout IPv6 - reset_with_add_addr_timeout 6 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow - chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1 - chk_add_nr 4 0 + if reset_with_add_addr_timeout "signal address, ADD_ADDR6 timeout" 6; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow + chk_join_nr 1 1 1 + chk_add_nr 4 0 + fi # signal addresses timeout - reset_with_add_addr_timeout - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - run_tests $ns1 $ns2 10.0.1.1 0 0 0 least - chk_join_nr "signal addresses, ADD_ADDR timeout" 2 2 2 - chk_add_nr 8 0 + if reset_with_add_addr_timeout "signal addresses, ADD_ADDR timeout"; then + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_set_limits $ns2 2 2 + run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10 + chk_join_nr 2 2 2 + chk_add_nr 8 0 + fi # signal invalid addresses timeout - reset_with_add_addr_timeout - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - run_tests $ns1 $ns2 10.0.1.1 0 0 0 least - chk_join_nr "invalid address, ADD_ADDR timeout" 1 1 1 - chk_add_nr 8 0 + if reset_with_add_addr_timeout "invalid address, ADD_ADDR timeout"; then + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_set_limits $ns2 2 2 + run_tests $ns1 $ns2 10.0.1.1 0 0 0 speed_10 + chk_join_nr 1 1 1 + chk_add_nr 8 0 + fi } remove_tests() { # single subflow, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow - chk_join_nr "remove single subflow" 1 1 1 - chk_rm_nr 1 1 + if reset "remove single subflow"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow + chk_join_nr 1 1 1 + chk_rm_nr 1 1 + fi # multiple subflows, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow - chk_join_nr "remove multiple subflows" 2 2 2 - chk_rm_nr 2 2 + if reset "remove multiple subflows"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow + chk_join_nr 2 2 2 + chk_rm_nr 2 2 + fi # single address, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow - chk_join_nr "remove single address" 1 1 1 - chk_add_nr 1 1 - chk_rm_nr 1 1 invert + if reset "remove single address"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_rm_nr 1 1 invert + fi # subflow and signal, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow - chk_join_nr "remove subflow and signal" 2 2 2 - chk_add_nr 1 1 - chk_rm_nr 1 1 + if reset "remove subflow and signal"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow + chk_join_nr 2 2 2 + chk_add_nr 1 1 + chk_rm_nr 1 1 + fi # subflows and signal, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow - chk_join_nr "remove subflows and signal" 3 3 3 - chk_add_nr 1 1 - chk_rm_nr 2 2 + if reset "remove subflows and signal"; then + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow + chk_join_nr 3 3 3 + chk_add_nr 1 1 + chk_rm_nr 2 2 + fi # addresses remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal id 250 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow - chk_join_nr "remove addresses" 3 3 3 - chk_add_nr 3 3 - chk_rm_nr 3 3 invert + if reset "remove addresses"; then + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_set_limits $ns2 3 3 + run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow + chk_join_nr 3 3 3 + chk_add_nr 3 3 + chk_rm_nr 3 3 invert + fi # invalid addresses remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow - chk_join_nr "remove invalid addresses" 1 1 1 - chk_add_nr 3 3 - chk_rm_nr 3 1 invert + if reset "remove invalid addresses"; then + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_set_limits $ns2 3 3 + run_tests $ns1 $ns2 10.0.1.1 0 -3 0 slow + chk_join_nr 1 1 1 + chk_add_nr 3 3 + chk_rm_nr 3 1 invert + fi # subflows and signal, flush - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow - chk_join_nr "flush subflows and signal" 3 3 3 - chk_add_nr 1 1 - chk_rm_nr 2 2 + if reset "flush subflows and signal"; then + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow + chk_join_nr 3 3 3 + chk_add_nr 1 1 + chk_rm_nr 1 3 invert simult + fi # subflows flush - reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow id 150 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow - chk_join_nr "flush subflows" 3 3 3 - chk_rm_nr 3 3 + if reset "flush subflows"; then + pm_nl_set_limits $ns1 3 3 + pm_nl_set_limits $ns2 3 3 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow + chk_join_nr 3 3 3 + chk_rm_nr 0 3 simult + fi # addresses flush - reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal id 250 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.4.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow - chk_join_nr "flush addresses" 3 3 3 - chk_add_nr 3 3 - chk_rm_nr 3 3 invert + if reset "flush addresses"; then + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal id 250 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.4.1 flags signal + pm_nl_set_limits $ns2 3 3 + run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow + chk_join_nr 3 3 3 + chk_add_nr 3 3 + chk_rm_nr 3 3 invert simult + fi # invalid addresses flush - reset - ip netns exec $ns1 ./pm_nl_ctl limits 3 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.12.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl add 10.0.14.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 3 3 - run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow - chk_join_nr "flush invalid addresses" 1 1 1 - chk_add_nr 3 3 - chk_rm_nr 3 1 invert + if reset "flush invalid addresses"; then + pm_nl_set_limits $ns1 3 3 + pm_nl_add_endpoint $ns1 10.0.12.1 flags signal + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + pm_nl_set_limits $ns2 3 3 + run_tests $ns1 $ns2 10.0.1.1 0 -8 0 slow + chk_join_nr 1 1 1 + chk_add_nr 3 3 + chk_rm_nr 3 1 invert + fi # remove id 0 subflow - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow - chk_join_nr "remove id 0 subflow" 1 1 1 - chk_rm_nr 1 1 + if reset "remove id 0 subflow"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 -9 slow + chk_join_nr 1 1 1 + chk_rm_nr 1 1 + fi # remove id 0 address - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow - chk_join_nr "remove id 0 address" 1 1 1 - chk_add_nr 1 1 - chk_rm_nr 1 1 invert + if reset "remove id 0 address"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 -9 0 slow + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_rm_nr 1 1 invert + fi } add_tests() { # add single subflow - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow - chk_join_nr "add single subflow" 1 1 1 + if reset "add single subflow"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow + chk_join_nr 1 1 1 + fi # add signal address - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow - chk_join_nr "add signal address" 1 1 1 - chk_add_nr 1 1 + if reset "add signal address"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # add multiple subflows - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow - chk_join_nr "add multiple subflows" 2 2 2 + if reset "add multiple subflows"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow + chk_join_nr 2 2 2 + fi # add multiple subflows IPv6 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow - chk_join_nr "add multiple subflows IPv6" 2 2 2 + if reset "add multiple subflows IPv6"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + run_tests $ns1 $ns2 dead:beef:1::1 0 0 2 slow + chk_join_nr 2 2 2 + fi # add multiple addresses IPv6 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow - chk_join_nr "add multiple addresses IPv6" 2 2 2 - chk_add_nr 2 2 + if reset "add multiple addresses IPv6"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 2 2 + run_tests $ns1 $ns2 dead:beef:1::1 0 2 0 slow + chk_join_nr 2 2 2 + chk_add_nr 2 2 + fi } ipv6_tests() { # subflow IPv6 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow - run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow - chk_join_nr "single subflow IPv6" 1 1 1 + if reset "single subflow IPv6"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow + run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow + chk_join_nr 1 1 1 + fi # add_address, unused IPv6 - reset - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow - chk_join_nr "unused signal address IPv6" 0 0 0 - chk_add_nr 1 1 + if reset "unused signal address IPv6"; then + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow + chk_join_nr 0 0 0 + chk_add_nr 1 1 + fi # signal address IPv6 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow - chk_join_nr "single address IPv6" 1 1 1 - chk_add_nr 1 1 + if reset "single address IPv6"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # single address IPv6, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow - chk_join_nr "remove single address IPv6" 1 1 1 - chk_add_nr 1 1 - chk_rm_nr 1 1 invert + if reset "remove single address IPv6"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_rm_nr 1 1 invert + fi # subflow and signal IPv6, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow - run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow - chk_join_nr "remove subflow and signal IPv6" 2 2 2 - chk_add_nr 1 1 - chk_rm_nr 1 1 + if reset "remove subflow and signal IPv6"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow + run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow + chk_join_nr 2 2 2 + chk_add_nr 1 1 + chk_rm_nr 1 1 + fi } v4mapped_tests() { # subflow IPv4-mapped to IPv4-mapped - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow - run_tests $ns1 $ns2 "::ffff:10.0.1.1" - chk_join_nr "single subflow IPv4-mapped" 1 1 1 + if reset "single subflow IPv4-mapped"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow + run_tests $ns1 $ns2 "::ffff:10.0.1.1" + chk_join_nr 1 1 1 + fi # signal address IPv4-mapped with IPv4-mapped sk - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal - run_tests $ns1 $ns2 "::ffff:10.0.1.1" - chk_join_nr "signal address IPv4-mapped" 1 1 1 - chk_add_nr 1 1 + if reset "signal address IPv4-mapped"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal + run_tests $ns1 $ns2 "::ffff:10.0.1.1" + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # subflow v4-map-v6 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 "::ffff:10.0.1.1" - chk_join_nr "single subflow v4-map-v6" 1 1 1 + if reset "single subflow v4-map-v6"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 "::ffff:10.0.1.1" + chk_join_nr 1 1 1 + fi # signal address v4-map-v6 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 "::ffff:10.0.1.1" - chk_join_nr "signal address v4-map-v6" 1 1 1 - chk_add_nr 1 1 + if reset "signal address v4-map-v6"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 "::ffff:10.0.1.1" + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # subflow v6-map-v4 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add "::ffff:10.0.3.2" flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow v6-map-v4" 1 1 1 + if reset "single subflow v6-map-v4"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 "::ffff:10.0.3.2" flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + fi # signal address v6-map-v4 - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add "::ffff:10.0.2.1" flags signal - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal address v6-map-v4" 1 1 1 - chk_add_nr 1 1 + if reset "signal address v6-map-v4"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 "::ffff:10.0.2.1" flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # no subflow IPv6 to v4 address - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "no JOIN with diff families v4-v6" 0 0 0 + if reset "no JOIN with diff families v4-v6"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # no subflow IPv6 to v4 address even if v6 has a valid v4 at the end - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add dead:beef:2::10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "no JOIN with diff families v4-v6-2" 0 0 0 + if reset "no JOIN with diff families v4-v6-2"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 dead:beef:2::10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # no subflow IPv4 to v6 address, no need to slow down too then - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 dead:beef:1::1 - chk_join_nr "no JOIN with diff families v6-v4" 0 0 0 + if reset "no JOIN with diff families v6-v4"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 dead:beef:1::1 + chk_join_nr 0 0 0 + fi } backup_tests() { # single subflow, backup - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,backup - run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup - chk_join_nr "single subflow, backup" 1 1 1 - chk_prio_nr 0 1 + if reset "single subflow, backup"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup + chk_join_nr 1 1 1 + chk_prio_nr 0 1 + fi # single address, backup - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup - chk_join_nr "single address, backup" 1 1 1 - chk_add_nr 1 1 - chk_prio_nr 1 0 + if reset "single address, backup"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_prio_nr 1 1 + fi + + # single address with port, backup + if reset "single address with port, backup"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_prio_nr 1 1 + fi + + if reset "mpc backup"; then + pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr 0 0 0 + chk_prio_nr 0 1 + fi + + if reset "mpc backup both sides"; then + pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup + pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow + chk_join_nr 0 0 0 + chk_prio_nr 1 1 + fi + + if reset "mpc switch to backup"; then + pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup + chk_join_nr 0 0 0 + chk_prio_nr 0 1 + fi + + if reset "mpc switch to backup both sides"; then + pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow + pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup + chk_join_nr 0 0 0 + chk_prio_nr 1 1 + fi } add_addr_ports_tests() { # signal address with port - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal address with port" 1 1 1 - chk_add_nr 1 1 1 + if reset "signal address with port"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 1 + fi # subflow and signal with port - reset - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "subflow and signal with port" 2 2 2 - chk_add_nr 1 1 1 + if reset "subflow and signal with port"; then + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + chk_add_nr 1 1 1 + fi # single address with port, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow - chk_join_nr "remove single address with port" 1 1 1 - chk_add_nr 1 1 1 - chk_rm_nr 1 1 invert + if reset "remove single address with port"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow + chk_join_nr 1 1 1 + chk_add_nr 1 1 1 + chk_rm_nr 1 1 invert + fi # subflow and signal with port, remove - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow - chk_join_nr "remove subflow and signal with port" 2 2 2 - chk_add_nr 1 1 1 - chk_rm_nr 1 1 + if reset "remove subflow and signal with port"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow + chk_join_nr 2 2 2 + chk_add_nr 1 1 1 + chk_rm_nr 1 1 + fi # subflows and signal with port, flush - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 0 -8 -2 slow - chk_join_nr "flush subflows and signal with port" 3 3 3 - chk_add_nr 1 1 - chk_rm_nr 2 2 + if reset "flush subflows and signal with port"; then + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 -8 -2 slow + chk_join_nr 3 3 3 + chk_add_nr 1 1 + chk_rm_nr 1 3 invert simult + fi # multiple addresses with port - reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10100 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "multiple addresses with port" 2 2 2 - chk_add_nr 2 2 2 + if reset "multiple addresses with port"; then + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10100 + pm_nl_set_limits $ns2 2 2 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + chk_add_nr 2 2 2 + fi # multiple addresses with ports - reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10101 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "multiple addresses with ports" 2 2 2 - chk_add_nr 2 2 2 + if reset "multiple addresses with ports"; then + pm_nl_set_limits $ns1 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal port 10101 + pm_nl_set_limits $ns2 2 2 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + chk_add_nr 2 2 2 + fi } syncookies_tests() { # single subflow, syncookies - reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow with syn cookies" 1 1 1 + if reset_with_cookies "single subflow with syn cookies"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + fi # multiple subflows with syn cookies - reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "multiple subflows with syn cookies" 2 2 2 + if reset_with_cookies "multiple subflows with syn cookies"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + fi # multiple subflows limited by server - reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "subflows limited by server w cookies" 2 1 1 + if reset_with_cookies "subflows limited by server w cookies"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 1 1 + fi # test signal address with cookies - reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal address with syn cookies" 1 1 1 - chk_add_nr 1 1 + if reset_with_cookies "signal address with syn cookies"; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # test cookie with subflow and signal - reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns1 ./pm_nl_ctl limits 0 2 - ip netns exec $ns2 ./pm_nl_ctl limits 1 2 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "subflow and signal w cookies" 2 2 2 - chk_add_nr 1 1 + if reset_with_cookies "subflow and signal w cookies"; then + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + chk_add_nr 1 1 + fi # accept and use add_addr with additional subflows - reset_with_cookies - ip netns exec $ns1 ./pm_nl_ctl limits 0 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "subflows and signal w. cookies" 3 3 3 - chk_add_nr 1 1 + if reset_with_cookies "subflows and signal w. cookies"; then + pm_nl_set_limits $ns1 0 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 3 3 3 + chk_add_nr 1 1 + fi } checksum_tests() { # checksum test 0 0 - reset_with_checksum 0 0 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - run_tests $ns1 $ns2 10.0.1.1 - chk_csum_nr "checksum test 0 0" + if reset_with_checksum 0 0; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # checksum test 1 1 - reset_with_checksum 1 1 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - run_tests $ns1 $ns2 10.0.1.1 - chk_csum_nr "checksum test 1 1" + if reset_with_checksum 1 1; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # checksum test 0 1 - reset_with_checksum 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - run_tests $ns1 $ns2 10.0.1.1 - chk_csum_nr "checksum test 0 1" + if reset_with_checksum 0 1; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # checksum test 1 0 - reset_with_checksum 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 0 1 - ip netns exec $ns2 ./pm_nl_ctl limits 0 1 - run_tests $ns1 $ns2 10.0.1.1 - chk_csum_nr "checksum test 1 0" + if reset_with_checksum 1 0; then + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi } deny_join_id0_tests() { # subflow allow join id0 ns1 - reset_with_allow_join_id0 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow allow join id0 ns1" 1 1 1 + if reset_with_allow_join_id0 "single subflow allow join id0 ns1" 1 0; then + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + fi # subflow allow join id0 ns2 - reset_with_allow_join_id0 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "single subflow allow join id0 ns2" 0 0 0 + if reset_with_allow_join_id0 "single subflow allow join id0 ns2" 0 1; then + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi # signal address allow join id0 ns1 # ADD_ADDRs are not affected by allow_join_id0 value. - reset_with_allow_join_id0 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal address allow join id0 ns1" 1 1 1 - chk_add_nr 1 1 + if reset_with_allow_join_id0 "signal address allow join id0 ns1" 1 0; then + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # signal address allow join id0 ns2 # ADD_ADDRs are not affected by allow_join_id0 value. - reset_with_allow_join_id0 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 1 1 - ip netns exec $ns2 ./pm_nl_ctl limits 1 1 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "signal address allow join id0 ns2" 1 1 1 - chk_add_nr 1 1 + if reset_with_allow_join_id0 "signal address allow join id0 ns2" 0 1; then + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + fi # subflow and address allow join id0 ns1 - reset_with_allow_join_id0 1 0 - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "subflow and address allow join id0 1" 2 2 2 + if reset_with_allow_join_id0 "subflow and address allow join id0 1" 1 0; then + pm_nl_set_limits $ns1 2 2 + pm_nl_set_limits $ns2 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 2 2 2 + fi # subflow and address allow join id0 ns2 - reset_with_allow_join_id0 0 1 - ip netns exec $ns1 ./pm_nl_ctl limits 2 2 - ip netns exec $ns2 ./pm_nl_ctl limits 2 2 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow - run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr "subflow and address allow join id0 2" 1 1 1 + if reset_with_allow_join_id0 "subflow and address allow join id0 2" 0 1; then + pm_nl_set_limits $ns1 2 2 + pm_nl_set_limits $ns2 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + fi } fullmesh_tests() @@ -1845,177 +2757,377 @@ fullmesh_tests() # fullmesh 1 # 2 fullmesh addrs in ns2, added before the connection, # 1 non-fullmesh addr in ns1, added during the connection. - reset - ip netns exec $ns1 ./pm_nl_ctl limits 0 4 - ip netns exec $ns2 ./pm_nl_ctl limits 1 4 - ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow,fullmesh - ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,fullmesh - run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow - chk_join_nr "fullmesh test 2x1" 4 4 4 - chk_add_nr 1 1 + if reset "fullmesh test 2x1"; then + pm_nl_set_limits $ns1 0 4 + pm_nl_set_limits $ns2 1 4 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh + run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow + chk_join_nr 4 4 4 + chk_add_nr 1 1 + fi # fullmesh 2 # 1 non-fullmesh addr in ns1, added before the connection, # 1 fullmesh addr in ns2, added during the connection. - reset - ip netns exec $ns1 ./pm_nl_ctl limits 1 3 - ip netns exec $ns2 ./pm_nl_ctl limits 1 3 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow - chk_join_nr "fullmesh test 1x1" 3 3 3 - chk_add_nr 1 1 + if reset "fullmesh test 1x1"; then + pm_nl_set_limits $ns1 1 3 + pm_nl_set_limits $ns2 1 3 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow + chk_join_nr 3 3 3 + chk_add_nr 1 1 + fi # fullmesh 3 # 1 non-fullmesh addr in ns1, added before the connection, # 2 fullmesh addrs in ns2, added during the connection. - reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 5 - ip netns exec $ns2 ./pm_nl_ctl limits 1 5 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow - chk_join_nr "fullmesh test 1x2" 5 5 5 - chk_add_nr 1 1 + if reset "fullmesh test 1x2"; then + pm_nl_set_limits $ns1 2 5 + pm_nl_set_limits $ns2 1 5 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow + chk_join_nr 5 5 5 + chk_add_nr 1 1 + fi # fullmesh 4 # 1 non-fullmesh addr in ns1, added before the connection, # 2 fullmesh addrs in ns2, added during the connection, # limit max_subflows to 4. - reset - ip netns exec $ns1 ./pm_nl_ctl limits 2 4 - ip netns exec $ns2 ./pm_nl_ctl limits 1 4 - ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal - run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow - chk_join_nr "fullmesh test 1x2, limited" 4 4 4 - chk_add_nr 1 1 -} - -all_tests() -{ - subflows_tests - subflows_error_tests - signal_address_tests - link_failure_tests - add_addr_timeout_tests - remove_tests - add_tests - ipv6_tests - v4mapped_tests - backup_tests - add_addr_ports_tests - syncookies_tests - checksum_tests - deny_join_id0_tests - fullmesh_tests + if reset "fullmesh test 1x2, limited"; then + pm_nl_set_limits $ns1 2 4 + pm_nl_set_limits $ns2 1 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_2 slow + chk_join_nr 4 4 4 + chk_add_nr 1 1 + fi + + # set fullmesh flag + if reset "set fullmesh flag test"; then + pm_nl_set_limits $ns1 4 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow + pm_nl_set_limits $ns2 4 4 + run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow fullmesh + chk_join_nr 2 2 2 + chk_rm_nr 0 1 + fi + + # set nofullmesh flag + if reset "set nofullmesh flag test"; then + pm_nl_set_limits $ns1 4 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh + pm_nl_set_limits $ns2 4 4 + run_tests $ns1 $ns2 10.0.1.1 0 0 fullmesh_1 slow nofullmesh + chk_join_nr 2 2 2 + chk_rm_nr 0 1 + fi + + # set backup,fullmesh flags + if reset "set backup,fullmesh flags test"; then + pm_nl_set_limits $ns1 4 4 + pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow + pm_nl_set_limits $ns2 4 4 + run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow backup,fullmesh + chk_join_nr 2 2 2 + chk_prio_nr 0 1 + chk_rm_nr 0 1 + fi + + # set nobackup,nofullmesh flags + if reset "set nobackup,nofullmesh flags test"; then + pm_nl_set_limits $ns1 4 4 + pm_nl_set_limits $ns2 4 4 + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow nobackup,nofullmesh + chk_join_nr 2 2 2 + chk_prio_nr 0 1 + chk_rm_nr 0 1 + fi +} + +fastclose_tests() +{ + if reset "fastclose test"; then + run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_client + chk_join_nr 0 0 0 + chk_fclose_nr 1 1 + chk_rst_nr 1 1 invert + fi + + if reset "fastclose server test"; then + run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_server + chk_join_nr 0 0 0 + chk_fclose_nr 1 1 invert + chk_rst_nr 1 1 + fi +} + +pedit_action_pkts() +{ + tc -n $ns2 -j -s action show action pedit index 100 | \ + grep "packets" | \ + sed 's/.*"packets":\([0-9]\+\),.*/\1/' +} + +fail_tests() +{ + # single subflow + if reset_with_fail "Infinite map" 1; then + run_tests $ns1 $ns2 10.0.1.1 128 + chk_join_nr 0 0 0 +1 +0 1 0 1 "$(pedit_action_pkts)" + chk_fail_nr 1 -1 invert + fi + + # multiple subflows + if reset_with_fail "MP_FAIL MP_RST" 2; then + tc -n $ns2 qdisc add dev ns2eth1 root netem rate 1mbit delay 5 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 1024 + chk_join_nr 1 1 1 1 0 1 1 0 "$(pedit_action_pkts)" + fi } +userspace_tests() +{ + # userspace pm type prevents add_addr + if reset "userspace pm type prevents add_addr"; then + set_userspace_pm $ns1 + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + chk_add_nr 0 0 + fi + + # userspace pm type does not echo add_addr without daemon + if reset "userspace pm no echo w/o daemon"; then + set_userspace_pm $ns2 + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + chk_add_nr 1 0 + fi + + # userspace pm type rejects join + if reset "userspace pm type rejects join"; then + set_userspace_pm $ns1 + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 0 + fi + + # userspace pm type does not send join + if reset "userspace pm type does not send join"; then + set_userspace_pm $ns2 + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 0 0 0 + fi + + # userspace pm type prevents mp_prio + if reset "userspace pm type prevents mp_prio"; then + set_userspace_pm $ns1 + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup + chk_join_nr 1 1 0 + chk_prio_nr 0 0 + fi + + # userspace pm type prevents rm_addr + if reset "userspace pm type prevents rm_addr"; then + set_userspace_pm $ns1 + set_userspace_pm $ns2 + pm_nl_set_limits $ns1 0 1 + pm_nl_set_limits $ns2 0 1 + pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow + chk_join_nr 0 0 0 + chk_rm_nr 0 0 + fi + + # userspace pm add & remove address + if reset "userspace pm add & remove address"; then + set_userspace_pm $ns1 + pm_nl_set_limits $ns2 1 1 + run_tests $ns1 $ns2 10.0.1.1 0 userspace_1 0 slow + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_rm_nr 1 1 invert + fi + + # userspace pm create destroy subflow + if reset "userspace pm create destroy subflow"; then + set_userspace_pm $ns2 + pm_nl_set_limits $ns1 0 1 + run_tests $ns1 $ns2 10.0.1.1 0 0 userspace_1 slow + chk_join_nr 1 1 1 + chk_rm_nr 0 1 + fi +} + +endpoint_tests() +{ + # userspace pm type prevents add_addr + if reset "implicit EP"; then + pm_nl_set_limits $ns1 2 2 + pm_nl_set_limits $ns2 2 2 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow & + + wait_mpj $ns1 + pm_nl_check_endpoint 1 "creation" \ + $ns2 10.0.2.2 id 1 flags implicit + + pm_nl_add_endpoint $ns2 10.0.2.2 id 33 + pm_nl_check_endpoint 0 "ID change is prevented" \ + $ns2 10.0.2.2 id 1 flags implicit + + pm_nl_add_endpoint $ns2 10.0.2.2 flags signal + pm_nl_check_endpoint 0 "modif is allowed" \ + $ns2 10.0.2.2 id 1 flags signal + wait + fi + + if reset "delete and re-add"; then + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow + run_tests $ns1 $ns2 10.0.1.1 4 0 0 slow & + + wait_mpj $ns2 + pm_nl_del_endpoint $ns2 2 10.0.2.2 + sleep 0.5 + chk_subflow_nr needtitle "after delete" 1 + + pm_nl_add_endpoint $ns2 10.0.2.2 dev ns2eth2 flags subflow + wait_mpj $ns2 + chk_subflow_nr "" "after re-add" 2 + wait + fi +} + +# [$1: error message] usage() { + if [ -n "${1}" ]; then + echo "${1}" + ret=1 + fi + echo "mptcp_join usage:" - echo " -f subflows_tests" - echo " -e subflows_error_tests" - echo " -s signal_address_tests" - echo " -l link_failure_tests" - echo " -t add_addr_timeout_tests" - echo " -r remove_tests" - echo " -a add_tests" - echo " -6 ipv6_tests" - echo " -4 v4mapped_tests" - echo " -b backup_tests" - echo " -p add_addr_ports_tests" - echo " -k syncookies_tests" - echo " -S checksum_tests" - echo " -d deny_join_id0_tests" - echo " -m fullmesh_tests" + + local key + for key in "${!all_tests[@]}"; do + echo " -${key} ${all_tests[${key}]}" + done + echo " -c capture pcap files" echo " -C enable data checksum" + echo " -i use ip mptcp" echo " -h help" -} -sin=$(mktemp) -sout=$(mktemp) -cin=$(mktemp) -cinsent=$(mktemp) -cout=$(mktemp) -init -make_file "$cin" "client" 1 -make_file "$sin" "server" 1 -trap cleanup EXIT + echo "[test ids|names]" -for arg in "$@"; do - # check for "capture/checksum" args before launching tests - if [[ "${arg}" =~ ^"-"[0-9a-zA-Z]*"c"[0-9a-zA-Z]*$ ]]; then - capture=1 - fi - if [[ "${arg}" =~ ^"-"[0-9a-zA-Z]*"C"[0-9a-zA-Z]*$ ]]; then - checksum=1 - fi + exit ${ret} +} - # exception for the capture/checksum options, the rest means: a part of the tests - if [ "${arg}" != "-c" ] && [ "${arg}" != "-C" ]; then - do_all_tests=0 - fi -done -if [ $do_all_tests -eq 1 ]; then - all_tests - exit $ret -fi +# Use a "simple" array to force an specific order we cannot have with an associative one +all_tests_sorted=( + f@subflows_tests + e@subflows_error_tests + s@signal_address_tests + l@link_failure_tests + t@add_addr_timeout_tests + r@remove_tests + a@add_tests + 6@ipv6_tests + 4@v4mapped_tests + b@backup_tests + p@add_addr_ports_tests + k@syncookies_tests + S@checksum_tests + d@deny_join_id0_tests + m@fullmesh_tests + z@fastclose_tests + F@fail_tests + u@userspace_tests + I@endpoint_tests +) + +all_tests_args="" +all_tests_names=() +for subtests in "${all_tests_sorted[@]}"; do + key="${subtests%@*}" + value="${subtests#*@}" + + all_tests_args+="${key}" + all_tests_names+=("${value}") + all_tests[${key}]="${value}" +done -while getopts 'fesltra64bpkdmchCS' opt; do +tests=() +while getopts "${all_tests_args}cCih" opt; do case $opt in - f) - subflows_tests - ;; - e) - subflows_error_tests - ;; - s) - signal_address_tests - ;; - l) - link_failure_tests - ;; - t) - add_addr_timeout_tests - ;; - r) - remove_tests - ;; - a) - add_tests - ;; - 6) - ipv6_tests - ;; - 4) - v4mapped_tests - ;; - b) - backup_tests - ;; - p) - add_addr_ports_tests - ;; - k) - syncookies_tests - ;; - S) - checksum_tests - ;; - d) - deny_join_id0_tests - ;; - m) - fullmesh_tests + ["${all_tests_args}"]) + tests+=("${all_tests[${opt}]}") ;; c) + capture=1 ;; C) + checksum=1 ;; - h | *) + i) + ip_mptcp=1 + ;; + h) usage ;; + *) + usage "Unknown option: -${opt}" + ;; esac done +shift $((OPTIND - 1)) + +for arg in "${@}"; do + if [[ "${arg}" =~ ^[0-9]+$ ]]; then + only_tests_ids+=("${arg}") + else + only_tests_names+=("${arg}") + fi +done + +if [ ${#tests[@]} -eq 0 ]; then + tests=("${all_tests_names[@]}") +fi + +for subtests in "${tests[@]}"; do + "${subtests}" +done + +if [ ${ret} -ne 0 ]; then + echo + echo "${#failed_tests[@]} failure(s) has(ve) been detected:" + for i in $(get_failed_tests_ids); do + echo -e "\t- ${i}: ${failed_tests[${i}]}" + done + echo +fi + exit $ret |