aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/net/pmtu.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/net/pmtu.sh')
-rwxr-xr-xtools/testing/selftests/net/pmtu.sh141
1 files changed, 137 insertions, 4 deletions
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index 694732e4b344..736e358dc549 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -26,6 +26,15 @@
# - pmtu_ipv6
# Same as pmtu_ipv4, except for locked PMTU tests, using IPv6
#
+# - pmtu_ipv4_dscp_icmp_exception
+# Set up the same network topology as pmtu_ipv4, but use non-default
+# routing table in A. A fib-rule is used to jump to this routing table
+# based on DSCP. Send ICMPv4 packets with the expected DSCP value and
+# verify that ECN doesn't interfere with the creation of PMTU exceptions.
+#
+# - pmtu_ipv4_dscp_udp_exception
+# Same as pmtu_ipv4_dscp_icmp_exception, but use UDP instead of ICMP.
+#
# - pmtu_ipv4_vxlan4_exception
# Set up the same network topology as pmtu_ipv4, create a VXLAN tunnel
# over IPv4 between A and B, routed via R1. On the link between R1 and B,
@@ -203,6 +212,8 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
tests="
pmtu_ipv4_exception ipv4: PMTU exceptions 1
pmtu_ipv6_exception ipv6: PMTU exceptions 1
+ pmtu_ipv4_dscp_icmp_exception ICMPv4 with DSCP and ECN: PMTU exceptions 1
+ pmtu_ipv4_dscp_udp_exception UDPv4 with DSCP and ECN: PMTU exceptions 1
pmtu_ipv4_vxlan4_exception IPv4 over vxlan4: PMTU exceptions 1
pmtu_ipv6_vxlan4_exception IPv6 over vxlan4: PMTU exceptions 1
pmtu_ipv4_vxlan6_exception IPv4 over vxlan6: PMTU exceptions 1
@@ -323,6 +334,9 @@ routes_nh="
B 6 default 61
"
+policy_mark=0x04
+rt_table=main
+
veth4_a_addr="192.168.1.1"
veth4_b_addr="192.168.1.2"
veth4_c_addr="192.168.2.10"
@@ -346,6 +360,7 @@ dummy6_mask="64"
err_buf=
tcpdump_pids=
nettest_pids=
+socat_pids=
err() {
err_buf="${err_buf}${1}
@@ -723,7 +738,7 @@ setup_routing_old() {
ns_name="$(nsname ${ns})"
- ip -n ${ns_name} route add ${addr} via ${gw}
+ ip -n "${ns_name}" route add "${addr}" table "${rt_table}" via "${gw}"
ns=""; addr=""; gw=""
done
@@ -753,7 +768,7 @@ setup_routing_new() {
ns_name="$(nsname ${ns})"
- ip -n ${ns_name} -${fam} route add ${addr} nhid ${nhid}
+ ip -n "${ns_name}" -"${fam}" route add "${addr}" table "${rt_table}" nhid "${nhid}"
ns=""; fam=""; addr=""; nhid=""
done
@@ -798,6 +813,24 @@ setup_routing() {
return 0
}
+setup_policy_routing() {
+ setup_routing
+
+ ip -netns "${NS_A}" -4 rule add dsfield "${policy_mark}" \
+ table "${rt_table}"
+
+ # Set the IPv4 Don't Fragment bit with tc, since socat doesn't seem to
+ # have an option do to it.
+ tc -netns "${NS_A}" qdisc replace dev veth_A-R1 root prio
+ tc -netns "${NS_A}" qdisc replace dev veth_A-R2 root prio
+ tc -netns "${NS_A}" filter add dev veth_A-R1 \
+ protocol ipv4 flower ip_proto udp \
+ action pedit ex munge ip df set 0x40 pipe csum ip and udp
+ tc -netns "${NS_A}" filter add dev veth_A-R2 \
+ protocol ipv4 flower ip_proto udp \
+ action pedit ex munge ip df set 0x40 pipe csum ip and udp
+}
+
setup_bridge() {
run_cmd ${ns_a} ip link add br0 type bridge || return $ksft_skip
run_cmd ${ns_a} ip link set br0 up
@@ -903,6 +936,11 @@ cleanup() {
done
nettest_pids=
+ for pid in ${socat_pids}; do
+ kill "${pid}"
+ done
+ socat_pids=
+
for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do
ip netns del ${n} 2> /dev/null
done
@@ -950,15 +988,21 @@ link_get_mtu() {
route_get_dst_exception() {
ns_cmd="${1}"
dst="${2}"
+ dsfield="${3}"
- ${ns_cmd} ip route get "${dst}"
+ if [ -z "${dsfield}" ]; then
+ dsfield=0
+ fi
+
+ ${ns_cmd} ip route get "${dst}" dsfield "${dsfield}"
}
route_get_dst_pmtu_from_exception() {
ns_cmd="${1}"
dst="${2}"
+ dsfield="${3}"
- mtu_parse "$(route_get_dst_exception "${ns_cmd}" ${dst})"
+ mtu_parse "$(route_get_dst_exception "${ns_cmd}" "${dst}" "${dsfield}")"
}
check_pmtu_value() {
@@ -1068,6 +1112,95 @@ test_pmtu_ipv6_exception() {
test_pmtu_ipvX 6
}
+test_pmtu_ipv4_dscp_icmp_exception() {
+ rt_table=100
+
+ setup namespaces policy_routing || return $ksft_skip
+ trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
+ "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \
+ "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \
+ "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2
+
+ # Set up initial MTU values
+ mtu "${ns_a}" veth_A-R1 2000
+ mtu "${ns_r1}" veth_R1-A 2000
+ mtu "${ns_r1}" veth_R1-B 1400
+ mtu "${ns_b}" veth_B-R1 1400
+
+ mtu "${ns_a}" veth_A-R2 2000
+ mtu "${ns_r2}" veth_R2-A 2000
+ mtu "${ns_r2}" veth_R2-B 1500
+ mtu "${ns_b}" veth_B-R2 1500
+
+ len=$((2000 - 20 - 8)) # Fills MTU of veth_A-R1
+
+ dst1="${prefix4}.${b_r1}.1"
+ dst2="${prefix4}.${b_r2}.1"
+
+ # Create route exceptions
+ dsfield=${policy_mark} # No ECN bit set (Not-ECT)
+ run_cmd "${ns_a}" ping -q -M want -Q "${dsfield}" -c 1 -w 1 -s "${len}" "${dst1}"
+
+ dsfield=$(printf "%#x" $((policy_mark + 0x02))) # ECN=2 (ECT(0))
+ run_cmd "${ns_a}" ping -q -M want -Q "${dsfield}" -c 1 -w 1 -s "${len}" "${dst2}"
+
+ # Check that exceptions have been created with the correct PMTU
+ pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" "${policy_mark}")"
+ check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
+
+ pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" "${policy_mark}")"
+ check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
+}
+
+test_pmtu_ipv4_dscp_udp_exception() {
+ rt_table=100
+
+ if ! which socat > /dev/null 2>&1; then
+ echo "'socat' command not found; skipping tests"
+ return $ksft_skip
+ fi
+
+ setup namespaces policy_routing || return $ksft_skip
+ trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \
+ "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \
+ "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \
+ "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2
+
+ # Set up initial MTU values
+ mtu "${ns_a}" veth_A-R1 2000
+ mtu "${ns_r1}" veth_R1-A 2000
+ mtu "${ns_r1}" veth_R1-B 1400
+ mtu "${ns_b}" veth_B-R1 1400
+
+ mtu "${ns_a}" veth_A-R2 2000
+ mtu "${ns_r2}" veth_R2-A 2000
+ mtu "${ns_r2}" veth_R2-B 1500
+ mtu "${ns_b}" veth_B-R2 1500
+
+ len=$((2000 - 20 - 8)) # Fills MTU of veth_A-R1
+
+ dst1="${prefix4}.${b_r1}.1"
+ dst2="${prefix4}.${b_r2}.1"
+
+ # Create route exceptions
+ run_cmd_bg "${ns_b}" socat UDP-LISTEN:50000 OPEN:/dev/null,wronly=1
+ socat_pids="${socat_pids} $!"
+
+ dsfield=${policy_mark} # No ECN bit set (Not-ECT)
+ run_cmd "${ns_a}" socat OPEN:/dev/zero,rdonly=1,readbytes="${len}" \
+ UDP:"${dst1}":50000,tos="${dsfield}"
+
+ dsfield=$(printf "%#x" $((policy_mark + 0x02))) # ECN=2 (ECT(0))
+ run_cmd "${ns_a}" socat OPEN:/dev/zero,rdonly=1,readbytes="${len}" \
+ UDP:"${dst2}":50000,tos="${dsfield}"
+
+ # Check that exceptions have been created with the correct PMTU
+ pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" "${policy_mark}")"
+ check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
+ pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" "${policy_mark}")"
+ check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
+}
+
test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
type=${1}
family=${2}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.