diff options
Diffstat (limited to 'tools/testing/selftests/netfilter/conntrack_vrf.sh')
| -rwxr-xr-x | tools/testing/selftests/netfilter/conntrack_vrf.sh | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/tools/testing/selftests/netfilter/conntrack_vrf.sh b/tools/testing/selftests/netfilter/conntrack_vrf.sh new file mode 100755 index 000000000000..8b5ea9234588 --- /dev/null +++ b/tools/testing/selftests/netfilter/conntrack_vrf.sh @@ -0,0 +1,241 @@ +#!/bin/sh + +# This script demonstrates interaction of conntrack and vrf. +# The vrf driver calls the netfilter hooks again, with oif/iif +# pointing at the VRF device. +# +# For ingress, this means first iteration has iifname of lower/real +# device. In this script, thats veth0. +# Second iteration is iifname set to vrf device, tvrf in this script. +# +# For egress, this is reversed: first iteration has the vrf device, +# second iteration is done with the lower/real/veth0 device. +# +# test_ct_zone_in demonstrates unexpected change of nftables +# behavior # caused by commit 09e856d54bda5f28 "vrf: Reset skb conntrack +# connection on VRF rcv" +# +# It was possible to assign conntrack zone to a packet (or mark it for +# `notracking`) in the prerouting chain before conntrack, based on real iif. +# +# After the change, the zone assignment is lost and the zone is assigned based +# on the VRF master interface (in case such a rule exists). +# assignment is lost. Instead, assignment based on the `iif` matching +# Thus it is impossible to distinguish packets based on the original +# interface. +# +# test_masquerade_vrf and test_masquerade_veth0 demonstrate the problem +# that was supposed to be fixed by the commit mentioned above to make sure +# that any fix to test case 1 won't break masquerade again. + +ksft_skip=4 + +IP0=172.30.30.1 +IP1=172.30.30.2 +PFXL=30 +ret=0 + +sfx=$(mktemp -u "XXXXXXXX") +ns0="ns0-$sfx" +ns1="ns1-$sfx" + +cleanup() +{ + ip netns pids $ns0 | xargs kill 2>/dev/null + ip netns pids $ns1 | xargs kill 2>/dev/null + + ip netns del $ns0 $ns1 +} + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add "$ns0" +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $ns0" + exit $ksft_skip +fi +ip netns add "$ns1" + +trap cleanup EXIT + +ip netns exec $ns0 sysctl -q -w net.ipv4.conf.default.rp_filter=0 +ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0 +ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0 + +ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not add veth device" + exit $ksft_skip +fi + +ip -net $ns0 li add tvrf type vrf table 9876 +if [ $? -ne 0 ];then + echo "SKIP: Could not add vrf device" + exit $ksft_skip +fi + +ip -net $ns0 li set lo up + +ip -net $ns0 li set veth0 master tvrf +ip -net $ns0 li set tvrf up +ip -net $ns0 li set veth0 up +ip -net $ns1 li set veth0 up + +ip -net $ns0 addr add $IP0/$PFXL dev veth0 +ip -net $ns1 addr add $IP1/$PFXL dev veth0 + +ip netns exec $ns1 iperf3 -s > /dev/null 2>&1& +if [ $? -ne 0 ];then + echo "SKIP: Could not start iperf3" + exit $ksft_skip +fi + +# test vrf ingress handling. +# The incoming connection should be placed in conntrack zone 1, +# as decided by the first iteration of the ruleset. +test_ct_zone_in() +{ +ip netns exec $ns0 nft -f - <<EOF +table testct { + chain rawpre { + type filter hook prerouting priority raw; + + iif { veth0, tvrf } counter meta nftrace set 1 + iif veth0 counter ct zone set 1 counter return + iif tvrf counter ct zone set 2 counter return + ip protocol icmp counter + notrack counter + } + + chain rawout { + type filter hook output priority raw; + + oif veth0 counter ct zone set 1 counter return + oif tvrf counter ct zone set 2 counter return + notrack counter + } +} +EOF + ip netns exec $ns1 ping -W 1 -c 1 -I veth0 $IP0 > /dev/null + + # should be in zone 1, not zone 2 + count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l) + if [ $count -eq 1 ]; then + echo "PASS: entry found in conntrack zone 1" + else + echo "FAIL: entry not found in conntrack zone 1" + count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l) + if [ $count -eq 1 ]; then + echo "FAIL: entry found in zone 2 instead" + else + echo "FAIL: entry not in zone 1 or 2, dumping table" + ip netns exec $ns0 conntrack -L + ip netns exec $ns0 nft list ruleset + fi + fi +} + +# add masq rule that gets evaluated w. outif set to vrf device. +# This tests the first iteration of the packet through conntrack, +# oifname is the vrf device. +test_masquerade_vrf() +{ + local qdisc=$1 + + if [ "$qdisc" != "default" ]; then + tc -net $ns0 qdisc add dev tvrf root $qdisc + fi + + ip netns exec $ns0 conntrack -F 2>/dev/null + +ip netns exec $ns0 nft -f - <<EOF +flush ruleset +table ip nat { + chain rawout { + type filter hook output priority raw; + + oif tvrf ct state untracked counter + } + chain postrouting2 { + type filter hook postrouting priority mangle; + + oif tvrf ct state untracked counter + } + chain postrouting { + type nat hook postrouting priority 0; + # NB: masquerade should always be combined with 'oif(name) bla', + # lack of this is intentional here, we want to exercise double-snat. + ip saddr 172.30.30.0/30 counter masquerade random + } +} +EOF + ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 >/dev/null + if [ $? -ne 0 ]; then + echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on vrf device" + ret=1 + return + fi + + # must also check that nat table was evaluated on second (lower device) iteration. + ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' && + ip netns exec $ns0 nft list table ip nat |grep -q 'untracked counter packets [1-9]' + if [ $? -eq 0 ]; then + echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device ($qdisc qdisc)" + else + echo "FAIL: vrf rules have unexpected counter value" + ret=1 + fi + + if [ "$qdisc" != "default" ]; then + tc -net $ns0 qdisc del dev tvrf root + fi +} + +# add masq rule that gets evaluated w. outif set to veth device. +# This tests the 2nd iteration of the packet through conntrack, +# oifname is the lower device (veth0 in this case). +test_masquerade_veth() +{ + ip netns exec $ns0 conntrack -F 2>/dev/null +ip netns exec $ns0 nft -f - <<EOF +flush ruleset +table ip nat { + chain postrouting { + type nat hook postrouting priority 0; + meta oif veth0 ip saddr 172.30.30.0/30 counter masquerade random + } +} +EOF + ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 > /dev/null + if [ $? -ne 0 ]; then + echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on veth device" + ret=1 + return + fi + + # must also check that nat table was evaluated on second (lower device) iteration. + ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' + if [ $? -eq 0 ]; then + echo "PASS: iperf3 connect with masquerade + sport rewrite on veth device" + else + echo "FAIL: vrf masq rule has unexpected counter value" + ret=1 + fi +} + +test_ct_zone_in +test_masquerade_vrf "default" +test_masquerade_vrf "pfifo" +test_masquerade_veth + +exit $ret |