diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/testing/selftests/powerpc/Makefile | 5 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/basic_asm.h | 70 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/.gitignore | 6 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/Makefile | 19 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/fpu_asm.S | 198 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/fpu_preempt.c | 113 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/fpu_signal.c | 135 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/fpu_syscall.c | 90 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/vmx_asm.S | 235 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/vmx_preempt.c | 112 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/vmx_signal.c | 156 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/math/vmx_syscall.c | 91 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/tm/tm-signal-msr-resv.c | 2 |
13 files changed, 1229 insertions, 3 deletions
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 0c2706bda330..b08f77cbe31b 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -8,7 +8,7 @@ ifeq ($(ARCH),powerpc) GIT_VERSION = $(shell git describe --always --long --dirty || echo "unknown") -CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR) $(CFLAGS) +CFLAGS := -Wall -O2 -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR) $(CFLAGS) export CFLAGS @@ -22,7 +22,8 @@ SUB_DIRS = benchmarks \ switch_endian \ syscalls \ tm \ - vphn + vphn \ + math endif diff --git a/tools/testing/selftests/powerpc/basic_asm.h b/tools/testing/selftests/powerpc/basic_asm.h new file mode 100644 index 000000000000..3349a0704d1a --- /dev/null +++ b/tools/testing/selftests/powerpc/basic_asm.h @@ -0,0 +1,70 @@ +#ifndef _SELFTESTS_POWERPC_BASIC_ASM_H +#define _SELFTESTS_POWERPC_BASIC_ASM_H + +#include <ppc-asm.h> +#include <asm/unistd.h> + +#define LOAD_REG_IMMEDIATE(reg,expr) \ + lis reg,(expr)@highest; \ + ori reg,reg,(expr)@higher; \ + rldicr reg,reg,32,31; \ + oris reg,reg,(expr)@high; \ + ori reg,reg,(expr)@l; + +/* + * Note: These macros assume that variables being stored on the stack are + * doublewords, while this is usually the case it may not always be the + * case for each use case. + */ +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define STACK_FRAME_MIN_SIZE 32 +#define STACK_FRAME_TOC_POS 24 +#define __STACK_FRAME_PARAM(_param) (32 + ((_param)*8)) +#define __STACK_FRAME_LOCAL(_num_params,_var_num) ((STACK_FRAME_PARAM(_num_params)) + ((_var_num)*8)) +#else +#define STACK_FRAME_MIN_SIZE 112 +#define STACK_FRAME_TOC_POS 40 +#define __STACK_FRAME_PARAM(i) (48 + ((i)*8)) + +/* + * Caveat: if a function passed more than 8 doublewords, the caller will have + * made more space... which would render the 112 incorrect. + */ +#define __STACK_FRAME_LOCAL(_num_params,_var_num) (112 + ((_var_num)*8)) +#endif + +/* Parameter x saved to the stack */ +#define STACK_FRAME_PARAM(var) __STACK_FRAME_PARAM(var) + +/* Local variable x saved to the stack after x parameters */ +#define STACK_FRAME_LOCAL(num_params,var) __STACK_FRAME_LOCAL(num_params,var) +#define STACK_FRAME_LR_POS 16 +#define STACK_FRAME_CR_POS 8 + +/* + * It is very important to note here that _extra is the extra amount of + * stack space needed. This space can be accessed using STACK_FRAME_PARAM() + * or STACK_FRAME_LOCAL() macros. + * + * r1 and r2 are not defined in ppc-asm.h (instead they are defined as sp + * and toc). Kernel programmers tend to prefer rX even for r1 and r2, hence + * %1 and %r2. r0 is defined in ppc-asm.h and therefore %r0 gets + * preprocessed incorrectly, hence r0. + */ +#define PUSH_BASIC_STACK(_extra) \ + mflr r0; \ + std r0,STACK_FRAME_LR_POS(%r1); \ + stdu %r1,-(_extra + STACK_FRAME_MIN_SIZE)(%r1); \ + mfcr r0; \ + stw r0,STACK_FRAME_CR_POS(%r1); \ + std %r2,STACK_FRAME_TOC_POS(%r1); + +#define POP_BASIC_STACK(_extra) \ + ld %r2,STACK_FRAME_TOC_POS(%r1); \ + lwz r0,STACK_FRAME_CR_POS(%r1); \ + mtcr r0; \ + addi %r1,%r1,(_extra + STACK_FRAME_MIN_SIZE); \ + ld r0,STACK_FRAME_LR_POS(%r1); \ + mtlr r0; + +#endif /* _SELFTESTS_POWERPC_BASIC_ASM_H */ diff --git a/tools/testing/selftests/powerpc/math/.gitignore b/tools/testing/selftests/powerpc/math/.gitignore new file mode 100644 index 000000000000..4fe13a439fd7 --- /dev/null +++ b/tools/testing/selftests/powerpc/math/.gitignore @@ -0,0 +1,6 @@ +fpu_syscall +vmx_syscall +fpu_preempt +vmx_preempt +fpu_signal +vmx_signal diff --git a/tools/testing/selftests/powerpc/math/Makefile b/tools/testing/selftests/powerpc/math/Makefile new file mode 100644 index 000000000000..5b88875d5955 --- /dev/null +++ b/tools/testing/selftests/powerpc/math/Makefile @@ -0,0 +1,19 @@ +TEST_PROGS := fpu_syscall fpu_preempt fpu_signal vmx_syscall vmx_preempt vmx_signal + +all: $(TEST_PROGS) + +$(TEST_PROGS): ../harness.c +$(TEST_PROGS): CFLAGS += -O2 -g -pthread -m64 -maltivec + +fpu_syscall: fpu_asm.S +fpu_preempt: fpu_asm.S +fpu_signal: fpu_asm.S + +vmx_syscall: vmx_asm.S +vmx_preempt: vmx_asm.S +vmx_signal: vmx_asm.S + +include ../../lib.mk + +clean: + rm -f $(TEST_PROGS) *.o diff --git a/tools/testing/selftests/powerpc/math/fpu_asm.S b/tools/testing/selftests/powerpc/math/fpu_asm.S new file mode 100644 index 000000000000..f3711d80e709 --- /dev/null +++ b/tools/testing/selftests/powerpc/math/fpu_asm.S @@ -0,0 +1,198 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include "../basic_asm.h" + +#define PUSH_FPU(pos) \ + stfd f14,pos(sp); \ + stfd f15,pos+8(sp); \ + stfd f16,pos+16(sp); \ + stfd f17,pos+24(sp); \ + stfd f18,pos+32(sp); \ + stfd f19,pos+40(sp); \ + stfd f20,pos+48(sp); \ + stfd f21,pos+56(sp); \ + stfd f22,pos+64(sp); \ + stfd f23,pos+72(sp); \ + stfd f24,pos+80(sp); \ + stfd f25,pos+88(sp); \ + stfd f26,pos+96(sp); \ + stfd f27,pos+104(sp); \ + stfd f28,pos+112(sp); \ + stfd f29,pos+120(sp); \ + stfd f30,pos+128(sp); \ + stfd f31,pos+136(sp); + +#define POP_FPU(pos) \ + lfd f14,pos(sp); \ + lfd f15,pos+8(sp); \ + lfd f16,pos+16(sp); \ + lfd f17,pos+24(sp); \ + lfd f18,pos+32(sp); \ + lfd f19,pos+40(sp); \ + lfd f20,pos+48(sp); \ + lfd f21,pos+56(sp); \ + lfd f22,pos+64(sp); \ + lfd f23,pos+72(sp); \ + lfd f24,pos+80(sp); \ + lfd f25,pos+88(sp); \ + lfd f26,pos+96(sp); \ + lfd f27,pos+104(sp); \ + lfd f28,pos+112(sp); \ + lfd f29,pos+120(sp); \ + lfd f30,pos+128(sp); \ + lfd f31,pos+136(sp); + +# Careful calling this, it will 'clobber' fpu (by design) +# Don't call this from C +FUNC_START(load_fpu) + lfd f14,0(r3) + lfd f15,8(r3) + lfd f16,16(r3) + lfd f17,24(r3) + lfd f18,32(r3) + lfd f19,40(r3) + lfd f20,48(r3) + lfd f21,56(r3) + lfd f22,64(r3) + lfd f23,72(r3) + lfd f24,80(r3) + lfd f25,88(r3) + lfd f26,96(r3) + lfd f27,104(r3) + lfd f28,112(r3) + lfd f29,120(r3) + lfd f30,128(r3) + lfd f31,136(r3) + blr +FUNC_END(load_fpu) + +FUNC_START(check_fpu) + mr r4,r3 + li r3,1 # assume a bad result + lfd f0,0(r4) + fcmpu cr1,f0,f14 + bne cr1,1f + lfd f0,8(r4) + fcmpu cr1,f0,f15 + bne cr1,1f + lfd f0,16(r4) + fcmpu cr1,f0,f16 + bne cr1,1f + lfd f0,24(r4) + fcmpu cr1,f0,f17 + bne cr1,1f + lfd f0,32(r4) + fcmpu cr1,f0,f18 + bne cr1,1f + lfd f0,40(r4) + fcmpu cr1,f0,f19 + bne cr1,1f + lfd f0,48(r4) + fcmpu cr1,f0,f20 + bne cr1,1f + lfd f0,56(r4) + fcmpu cr1,f0,f21 + bne cr1,1f + lfd f0,64(r4) + fcmpu cr1,f0,f22 + bne cr1,1f + lfd f0,72(r4) + fcmpu cr1,f0,f23 + bne cr1,1f + lfd f0,80(r4) + fcmpu cr1,f0,f24 + bne cr1,1f + lfd f0,88(r4) + fcmpu cr1,f0,f25 + bne cr1,1f + lfd f0,96(r4) + fcmpu cr1,f0,f26 + bne cr1,1f + lfd f0,104(r4) + fcmpu cr1,f0,f27 + bne cr1,1f + lfd f0,112(r4) + fcmpu cr1,f0,f28 + bne cr1,1f + lfd f0,120(r4) + fcmpu cr1,f0,f29 + bne cr1,1f + lfd f0,128(r4) + fcmpu cr1,f0,f30 + bne cr1,1f + lfd f0,136(r4) + fcmpu cr1,f0,f31 + bne cr1,1f + li r3,0 # Success!!! +1: blr + +FUNC_START(test_fpu) + # r3 holds pointer to where to put the result of fork + # r4 holds pointer to the pid + # f14-f31 are non volatiles + PUSH_BASIC_STACK(256) + std r3,STACK_FRAME_PARAM(0)(sp) # Address of darray + std r4,STACK_FRAME_PARAM(1)(sp) # Address of pid + PUSH_FPU(STACK_FRAME_LOCAL(2,0)) + + bl load_fpu + nop + li r0,__NR_fork + sc + + # pass the result of the fork to the caller + ld r9,STACK_FRAME_PARAM(1)(sp) + std r3,0(r9) + + ld r3,STACK_FRAME_PARAM(0)(sp) + bl check_fpu + nop + + POP_FPU(STACK_FRAME_LOCAL(2,0)) + POP_BASIC_STACK(256) + blr +FUNC_END(test_fpu) + +# int preempt_fpu(double *darray, int *threads_running, int *running) +# On starting will (atomically) decrement not_ready as a signal that the FPU +# has been loaded with darray. Will proceed to check the validity of the FPU +# registers while running is not zero. +FUNC_START(preempt_fpu) + PUSH_BASIC_STACK(256) + std r3,STACK_FRAME_PARAM(0)(sp) # double *darray + std r4,STACK_FRAME_PARAM(1)(sp) # int *threads_starting + std r5,STACK_FRAME_PARAM(2)(sp) # int *running + PUSH_FPU(STACK_FRAME_LOCAL(3,0)) + + bl load_fpu + nop + + sync + # Atomic DEC + ld r3,STACK_FRAME_PARAM(1)(sp) +1: lwarx r4,0,r3 + addi r4,r4,-1 + stwcx. r4,0,r3 + bne- 1b + +2: ld r3,STACK_FRAME_PARAM(0)(sp) + bl check_fpu + nop + cmpdi r3,0 + bne 3f + ld r4,STACK_FRAME_PARAM(2)(sp) + ld r5,0(r4) + cmpwi r5,0 + bne 2b + +3: POP_FPU(STACK_FRAME_LOCAL(3,0)) + POP_BASIC_STACK(256) + blr +FUNC_END(preempt_fpu) diff --git a/tools/testing/selftests/powerpc/math/fpu_preempt.c b/tools/testing/selftests/powerpc/math/fpu_preempt.c new file mode 100644 index 000000000000..0f85b79d883d --- /dev/null +++ b/tools/testing/selftests/powerpc/math/fpu_preempt.c @@ -0,0 +1,113 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This test attempts to see if the FPU registers change across preemption. + * Two things should be noted here a) The check_fpu function in asm only checks + * the non volatile registers as it is reused from the syscall test b) There is + * no way to be sure preemption happened so this test just uses many threads + * and a long wait. As such, a successful test doesn't mean much but a failure + * is bad. + */ + +#include <stdio.h> +#include <unistd.h> +#include <sys/syscall.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <stdlib.h> +#include <pthread.h> + +#include "utils.h" + +/* Time to wait for workers to get preempted (seconds) */ +#define PREEMPT_TIME 20 +/* + * Factor by which to multiply number of online CPUs for total number of + * worker threads + */ +#define THREAD_FACTOR 8 + + +__thread double darray[] = {0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, + 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0, + 2.1}; + +int threads_starting; +int running; + +extern void preempt_fpu(double *darray, int *threads_starting, int *running); + +void *preempt_fpu_c(void *p) +{ + int i; + srand(pthread_self()); + for (i = 0; i < 21; i++) + darray[i] = rand(); + + /* Test failed if it ever returns */ + preempt_fpu(darray, &threads_starting, &running); + + return p; +} + +int test_preempt_fpu(void) +{ + int i, rc, threads; + pthread_t *tids; + + threads = sysconf(_SC_NPROCESSORS_ONLN) * THREAD_FACTOR; + tids = malloc((threads) * sizeof(pthread_t)); + FAIL_IF(!tids); + + running = true; + threads_starting = threads; + for (i = 0; i < threads; i++) { + rc = pthread_create(&tids[i], NULL, preempt_fpu_c, NULL); + FAIL_IF(rc); + } + + setbuf(stdout, NULL); + /* Not really necessary but nice to wait for every thread to start */ + printf("\tWaiting for all workers to start..."); + while(threads_starting) + asm volatile("": : :"memory"); + printf("done\n"); + + printf("\tWaiting for %d seconds to let some workers get preempted...", PREEMPT_TIME); + sleep(PREEMPT_TIME); + printf("done\n"); + + printf("\tStopping workers..."); + /* + * Working are checking this value every loop. In preempt_fpu 'cmpwi r5,0; bne 2b'. + * r5 will have loaded the value of running. + */ + running = 0; + for (i = 0; i < threads; i++) { + void *rc_p; + pthread_join(tids[i], &rc_p); + + /* + * Harness will say the fail was here, look at why preempt_fpu + * returned + */ + if ((long) rc_p) + printf("oops\n"); + FAIL_IF((long) rc_p); + } + printf("done\n"); + + free(tids); + return 0; +} + +int main(int argc, char *argv[]) +{ + return test_harness(test_preempt_fpu, "fpu_preempt"); +} diff --git a/tools/testing/selftests/powerpc/math/fpu_signal.c b/tools/testing/selftests/powerpc/math/fpu_signal.c new file mode 100644 index 000000000000..888aa51b4204 --- /dev/null +++ b/tools/testing/selftests/powerpc/math/fpu_signal.c @@ -0,0 +1,135 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This test attempts to see if the FPU registers are correctly reported in a + * signal context. Each worker just spins checking its FPU registers, at some + * point a signal will interrupt it and C code will check the signal context + * ensuring it is also the same. + */ + +#include <stdio.h> +#include <unistd.h> +#include <sys/syscall.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <stdlib.h> +#include <pthread.h> + +#include "utils.h" + +/* Number of times each thread should receive the signal */ +#define ITERATIONS 10 +/* + * Factor by which to multiply number of online CPUs for total number of + * worker threads + */ +#define THREAD_FACTOR 8 + +__thread double darray[] = {0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, + 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0, + 2.1}; + +bool bad_context; +int threads_starting; +int running; + +extern long preempt_fpu(double *darray, int *threads_starting, int *running); + +void signal_fpu_sig(int sig, siginfo_t *info, void *context) +{ + int i; + ucontext_t *uc = context; + mcontext_t *mc = &uc->uc_mcontext; + + /* Only the non volatiles were loaded up */ + for (i = 14; i < 32; i++) { + if (mc->fp_regs[i] != darray[i - 14]) { + bad_context = true; + break; + } + } +} + +void *signal_fpu_c(void *p) +{ + int i; + long rc; + struct sigaction act; + act.sa_sigaction = signal_fpu_sig; + act.sa_flags = SA_SIGINFO; + rc = sigaction(SIGUSR1, &act, NULL); + if (rc) + return p; + + srand(pthread_self()); + for (i = 0; i < 21; i++) + darray[i] = rand(); + + rc = preempt_fpu(darray, &threads_starting, &running); + + return (void *) rc; +} + +int test_signal_fpu(void) +{ + int i, j, rc, threads; + void *rc_p; + pthread_t *tids; + + threads = sysconf(_SC_NPROCESSORS_ONLN) * THREAD_FACTOR; + tids = malloc(threads * sizeof(pthread_t)); + FAIL_IF(!tids); + + running = true; + threads_starting = threads; + for (i = 0; i < threads; i++) { + rc = pthread_create(&tids[i], NULL, signal_fpu_c, NULL); + FAIL_IF(rc); + } + + setbuf(stdout, NULL); + printf("\tWaiting for all workers to start..."); + while (threads_starting) + asm volatile("": : :"memory"); + printf("done\n"); + + printf("\tSending signals to all threads %d times...", ITERATIONS); + for (i = 0; i < ITERATIONS; i++) { + for (j = 0; j < threads; j++) { + pthread_kill(tids[j], SIGUSR1); + } + sleep(1); + } + printf("done\n"); + + printf("\tStopping workers..."); + running = 0; + for (i = 0; i < threads; i++) { + pthread_join(tids[i], &rc_p); + + /* + * Harness will say the fail was here, look at why signal_fpu + * returned + */ + if ((long) rc_p || bad_context) + printf("oops\n"); + if (bad_context) + fprintf(stderr, "\t!! bad_context is true\n"); + FAIL_IF((long) rc_p || bad_context); + } + printf("done\n"); + + free(tids); + return 0; +} + +int main(int argc, char *argv[]) +{ + return test_harness(test_signal_fpu, "fpu_signal"); +} diff --git a/tools/testing/selftests/powerpc/math/fpu_syscall.c b/tools/testing/selftests/powerpc/math/fpu_syscall.c new file mode 100644 index 000000000000..949e6721256d --- /dev/null +++ b/tools/testing/selftests/powerpc/math/fpu_syscall.c @@ -0,0 +1,90 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This test attempts to see if the FPU registers change across a syscall (fork). + */ + +#include <stdio.h> +#include <unistd.h> +#include <sys/syscall.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <stdlib.h> + +#include "utils.h" + +extern int test_fpu(double *darray, pid_t *pid); + +double darray[] = {0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, + 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0, + 2.1}; + +int syscall_fpu(void) +{ + pid_t fork_pid; + int i; + int ret; + int child_ret; + for (i = 0; i < 1000; i++) { + /* test_fpu will fork() */ + ret = test_fpu(darray, &fork_pid); + if (fork_pid == -1) + return -1; + if (fork_pid == 0) + exit(ret); + waitpid(fork_pid, &child_ret, 0); + if (ret || child_ret) + return 1; + } + + return 0; +} + +int test_syscall_fpu(void) +{ + /* + * Setup an environment with much context switching + */ + pid_t pid2; + pid_t pid = fork(); + int ret; + int child_ret; + FAIL_IF(pid == -1); + + pid2 = fork(); + /* Can't FAIL_IF(pid2 == -1); because already forked once */ + if (pid2 == -1) { + /* + * Couldn't fork, ensure test is a fail + */ + child_ret = ret = 1; + } else { + ret = syscall_fpu(); + if (pid2) + waitpid(pid2, &child_ret, 0); + else + exit(ret); + } + + ret |= child_ret; + + if (pid) + waitpid(pid, &child_ret, 0); + else + exit(ret); + + FAIL_IF(ret || child_ret); + return 0; +} + +int main(int argc, char *argv[]) +{ + return test_harness(test_syscall_fpu, "syscall_fpu"); + +} diff --git a/tools/testing/selftests/powerpc/math/vmx_asm.S b/tools/testing/selftests/powerpc/math/vmx_asm.S new file mode 100644 index 000000000000..1b8c248b3ac1 --- /dev/null +++ b/tools/testing/selftests/powerpc/math/vmx_asm.S @@ -0,0 +1,235 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include "../basic_asm.h" + +# POS MUST BE 16 ALIGNED! +#define PUSH_VMX(pos,reg) \ + li reg,pos; \ + stvx v20,reg,sp; \ + addi reg,reg,16; \ + stvx v21,reg,sp; \ + addi reg,reg,16; \ + stvx v22,reg,sp; \ + addi reg,reg,16; \ + stvx v23,reg,sp; \ + addi reg,reg,16; \ + stvx v24,reg,sp; \ + addi reg,reg,16; \ + stvx v25,reg,sp; \ + addi reg,reg,16; \ + stvx v26,reg,sp; \ + addi reg,reg,16; \ + stvx v27,reg,sp; \ + addi reg,reg,16; \ + stvx v28,reg,sp; \ + addi reg,reg,16; \ + stvx v29,reg,sp; \ + addi reg,reg,16; \ + stvx v30,reg,sp; \ + addi reg,reg,16; \ + stvx v31,reg,sp; + +# POS MUST BE 16 ALIGNED! +#define POP_VMX(pos,reg) \ + li reg,pos; \ + lvx v20,reg,sp; \ + addi reg,reg,16; \ + lvx v21,reg,sp; \ + addi reg,reg,16; \ + lvx v22,reg,sp; \ + addi reg,reg,16; \ + lvx v23,reg,sp; \ + addi reg,reg,16; \ + lvx v24,reg,sp; \ + addi reg,reg,16; \ + lvx v25,reg,sp; \ + addi reg,reg,16; \ + lvx v26,reg,sp; \ + addi reg,reg,16; \ + lvx v27,reg,sp; \ + addi reg,reg,16; \ + lvx v28,reg,sp; \ + addi reg,reg,16; \ + lvx v29,reg,sp; \ + addi reg,reg,16; \ + lvx v30,reg,sp; \ + addi reg,reg,16; \ + lvx v31,reg,sp; + +# Carefull this will 'clobber' vmx (by design) +# Don't call this from C +FUNC_START(load_vmx) + li r5,0 + lvx v20,r5,r3 + addi r5,r5,16 + lvx v21,r5,r3 + addi r5,r5,16 + lvx v22,r5,r3 + addi r5,r5,16 + lvx v23,r5,r3 + addi r5,r5,16 + lvx v24,r5,r3 + addi r5,r5,16 + lvx v25,r5,r3 + addi r5,r5,16 + lvx v26,r5,r3 + addi r5,r5,16 + lvx v27,r5,r3 + addi r5,r5,16 + lvx v28,r5,r3 + addi r5,r5,16 + lvx v29,r5,r3 + addi r5,r5,16 + lvx v30,r5,r3 + addi r5,r5,16 + lvx v31,r5,r3 + blr +FUNC_END(load_vmx) + +# Should be safe from C, only touches r4, r5 and v0,v1,v2 +FUNC_START(check_vmx) + PUSH_BASIC_STACK(32) + mr r4,r3 + li r3,1 # assume a bad result + li r5,0 + lvx v0,r5,r4 + vcmpequd. v1,v0,v20 + vmr v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v21 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v22 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v23 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v24 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v25 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v26 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v27 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v28 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v29 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v30 + vand v2,v2,v1 + + addi r5,r5,16 + lvx v0,r5,r4 + vcmpequd. v1,v0,v31 + vand v2,v2,v1 + + li r5,STACK_FRAME_LOCAL(0,0) + stvx v2,r5,sp + ldx r0,r5,sp + cmpdi r0,0xffffffffffffffff + bne 1f + li r3,0 +1: POP_BASIC_STACK(32) + blr +FUNC_END(check_vmx) + +# Safe from C +FUNC_START(test_vmx) + # r3 holds pointer to where to put the result of fork + # r4 holds pointer to the pid + # v20-v31 are non-volatile + PUSH_BASIC_STACK(512) + std r3,STACK_FRAME_PARAM(0)(sp) # Address of varray + std r4,STACK_FRAME_PARAM(1)(sp) # address of pid + PUSH_VMX(STACK_FRAME_LOCAL(2,0),r4) + + bl load_vmx + nop + + li r0,__NR_fork + sc + # Pass the result of fork back to the caller + ld r9,STACK_FRAME_PARAM(1)(sp) + std r3,0(r9) + + ld r3,STACK_FRAME_PARAM(0)(sp) + bl check_vmx + nop + + POP_VMX(STACK_FRAME_LOCAL(2,0),r4) + POP_BASIC_STACK(512) + blr +FUNC_END(test_vmx) + +# int preempt_vmx(vector int *varray, int *threads_starting, int *running) +# On starting will (atomically) decrement threads_starting as a signal that +# the VMX have been loaded with varray. Will proceed to check the validity of +# the VMX registers while running is not zero. +FUNC_START(preempt_vmx) + PUSH_BASIC_STACK(512) + std r3,STACK_FRAME_PARAM(0)(sp) # vector int *varray + std r4,STACK_FRAME_PARAM(1)(sp) # int *threads_starting + std r5,STACK_FRAME_PARAM(2)(sp) # int *running + # VMX need to write to 16 byte aligned addresses, skip STACK_FRAME_LOCAL(3,0) + PUSH_VMX(STACK_FRAME_LOCAL(4,0),r4) + + bl load_vmx + nop + + sync + # Atomic DEC + ld r3,STACK_FRAME_PARAM(1)(sp) +1: lwarx r4,0,r3 + addi r4,r4,-1 + stwcx. r4,0,r3 + bne- 1b + +2: ld r3,STACK_FRAME_PARAM(0)(sp) + bl check_vmx + nop + cmpdi r3,0 + bne 3f + ld r4,STACK_FRAME_PARAM(2)(sp) + ld r5,0(r4) + cmpwi r5,0 + bne 2b + +3: POP_VMX(STACK_FRAME_LOCAL(4,0),r4) + POP_BASIC_STACK(512) + blr +FUNC_END(preempt_vmx) diff --git a/tools/testing/selftests/powerpc/math/vmx_preempt.c b/tools/testing/selftests/powerpc/math/vmx_preempt.c new file mode 100644 index 000000000000..9ef376c55b13 --- /dev/null +++ b/tools/testing/selftests/powerpc/math/vmx_preempt.c @@ -0,0 +1,112 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This test attempts to see if the VMX registers change across preemption. + * Two things should be noted here a) The check_vmx function in asm only checks + * the non volatile registers as it is reused from the syscall test b) There is + * no way to be sure preemption happened so this test just uses many threads + * and a long wait. As such, a successful test doesn't mean much but a failure + * is bad. + */ + +#include <stdio.h> +#include <unistd.h> +#include <sys/syscall.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <stdlib.h> +#include <pthread.h> + +#include "utils.h" + +/* Time to wait for workers to get preempted (seconds) */ +#define PREEMPT_TIME 20 +/* + * Factor by which to multiply number of online CPUs for total number of + * worker threads + */ +#define THREAD_FACTOR 8 + +__thread vector int varray[] = {{1, 2, 3, 4}, {5, 6, 7, 8}, {9, 10,11,12}, + {13,14,15,16},{17,18,19,20},{21,22,23,24}, + {25,26,27,28},{29,30,31,32},{33,34,35,36}, + {37,38,39,40},{41,42,43,44},{45,46,47,48}}; + +int threads_starting; +int running; + +extern void preempt_vmx(vector int *varray, int *threads_starting, int *running); + +void *preempt_vmx_c(void *p) +{ + int i, j; + srand(pthread_self()); + for (i = 0; i < 12; i++) + for (j = 0; j < 4; j++) + varray[i][j] = rand(); + + /* Test fails if it ever returns */ + preempt_vmx(varray, &threads_starting, &running); + return p; +} + +int test_preempt_vmx(void) +{ + int i, rc, threads; + pthread_t *tids; + + threads = sysconf(_SC_NPROCESSORS_ONLN) * THREAD_FACTOR; + tids = malloc(threads * sizeof(pthread_t)); + FAIL_IF(!tids); + + running = true; + threads_starting = threads; + for (i = 0; i < threads; i++) { + rc = pthread_create(&tids[i], NULL, preempt_vmx_c, NULL); + FAIL_IF(rc); + } + + setbuf(stdout, NULL); + /* Not really nessesary but nice to wait for every thread to start */ + printf("\tWaiting for all workers to start..."); + while(threads_starting) + asm volatile("": : :"memory"); + printf("done\n"); + + printf("\tWaiting for %d seconds to let some workers get preempted...", PREEMPT_TIME); + sleep(PREEMPT_TIME); + printf("done\n"); + + printf("\tStopping workers..."); + /* + * Working are checking this value every loop. In preempt_vmx 'cmpwi r5,0; bne 2b'. + * r5 will have loaded the value of running. + */ + running = 0; + for (i = 0; i < threads; i++) { + void *rc_p; + pthread_join(tids[i], &rc_p); + + /* + * Harness will say the fail was here, look at why preempt_vmx + * returned + */ + if ((long) rc_p) + printf("oops\n"); + FAIL_IF((long) rc_p); + } + printf("done\n"); + + return 0; +} + +int main(int argc, char *argv[]) +{ + return test_harness(test_preempt_vmx, "vmx_preempt"); +} diff --git a/tools/testing/selftests/powerpc/math/vmx_signal.c b/tools/testing/selftests/powerpc/math/vmx_signal.c new file mode 100644 index 000000000000..671d7533a557 --- /dev/null +++ b/tools/testing/selftests/powerpc/math/vmx_signal.c @@ -0,0 +1,156 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This test attempts to see if the VMX registers are correctly reported in a + * signal context. Each worker just spins checking its VMX registers, at some + * point a signal will interrupt it and C code will check the signal context + * ensuring it is also the same. + */ + +#include <stdio.h> +#include <unistd.h> +#include <sys/syscall.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <stdlib.h> +#include <string.h> +#include <pthread.h> +#include <altivec.h> + +#include "utils.h" + +/* Number of times each thread should receive the signal */ +#define ITERATIONS 10 +/* + * Factor by which to multiply number of online CPUs for total number of + * worker threads + */ +#define THREAD_FACTOR 8 + +__thread vector int varray[] = {{1, 2, 3, 4}, {5, 6, 7, 8}, {9, 10,11,12}, + {13,14,15,16},{17,18,19,20},{21,22,23,24}, + {25,26,27,28},{29,30,31,32},{33,34,35,36}, + {37,38,39,40},{41,42,43,44},{45,46,47,48}}; + +bool bad_context; +int running; +int threads_starting; + +extern int preempt_vmx(vector int *varray, int *threads_starting, int *sentinal); + +void signal_vmx_sig(int sig, siginfo_t *info, void *context) +{ + int i; + ucontext_t *uc = context; + mcontext_t *mc = &uc->uc_mcontext; + + /* Only the non volatiles were loaded up */ + for (i = 20; i < 32; i++) { + if (memcmp(mc->v_regs->vrregs[i], &varray[i - 20], 16)) { + int j; + /* + * Shouldn't printf() in a signal handler, however, this is a + * test and we've detected failure. Understanding what failed + * is paramount. All that happens after this is tests exit with + * failure. + */ + printf("VMX mismatch at reg %d!\n", i); + printf("Reg | Actual | Expected\n"); + for (j = 20; j < 32; j++) { + printf("%d | 0x%04x%04x%04x%04x | 0x%04x%04x%04x%04x\n", j, mc->v_regs->vrregs[j][0], + mc->v_regs->vrregs[j][1], mc->v_regs->vrregs[j][2], mc->v_regs->vrregs[j][3], + varray[j - 20][0], varray[j - 20][1], varray[j - 20][2], varray[j - 20][3]); + } + bad_context = true; + break; + } + } +} + +void *signal_vmx_c(void *p) +{ + int i, j; + long rc; + struct sigaction act; + act.sa_sigaction = signal_vmx_sig; + act.sa_flags = SA_SIGINFO; + rc = sigaction(SIGUSR1, &act, NULL); + if (rc) + return p; + + srand(pthread_self()); + for (i = 0; i < 12; i++) + for (j = 0; j < 4; j++) + varray[i][j] = rand(); + + rc = preempt_vmx(varray, &threads_starting, &running); + + return (void *) rc; +} + +int test_signal_vmx(void) +{ + int i, j, rc, threads; + void *rc_p; + pthread_t *tids; + + threads = sysconf(_SC_NPROCESSORS_ONLN) * THREAD_FACTOR; + tids = malloc(threads * sizeof(pthread_t)); + FAIL_IF(!tids); + + running = true; + threads_starting = threads; + for (i = 0; i < threads; i++) { + rc = pthread_create(&tids[i], NULL, signal_vmx_c, NULL); + FAIL_IF(rc); + } + + setbuf(stdout, NULL); + printf("\tWaiting for %d workers to start... %d", threads, threads_starting); + while (threads_starting) { + asm volatile("": : :"memory"); + usleep(1000); + printf(", %d", threads_starting); + } + printf(" ...done\n"); + + printf("\tSending signals to all threads %d times...", ITERATIONS); + for (i = 0; i < ITERATIONS; i++) { + for (j = 0; j < threads; j++) { + pthread_kill(tids[j], SIGUSR1); + } + sleep(1); + } + printf("done\n"); + + printf("\tKilling workers..."); + running = 0; + for (i = 0; i < threads; i++) { + pthread_join(tids[i], &rc_p); + + /* + * Harness will say the fail was here, look at why signal_vmx + * returned + */ + if ((long) rc_p || bad_context) + printf("oops\n"); + if (bad_context) + fprintf(stderr, "\t!! bad_context is true\n"); + FAIL_IF((long) rc_p || bad_context); + } + printf("done\n"); + + free(tids); + return 0; +} + +int main(int argc, char *argv[]) +{ + return test_harness(test_signal_vmx, "vmx_signal"); +} diff --git a/tools/testing/selftests/powerpc/math/vmx_syscall.c b/tools/testing/selftests/powerpc/math/vmx_syscall.c new file mode 100644 index 000000000000..a017918ee1ca --- /dev/null +++ b/tools/testing/selftests/powerpc/math/vmx_syscall.c @@ -0,0 +1,91 @@ +/* + * Copyright 2015, Cyril Bur, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This test attempts to see if the VMX registers change across a syscall (fork). + */ + +#include <altivec.h> +#include <stdio.h> +#include <unistd.h> +#include <sys/syscall.h> +#include <sys/time.h> +#include <stdlib.h> +#include <sys/types.h> +#include <sys/wait.h> +#include "utils.h" + +vector int varray[] = {{1, 2, 3, 4}, {5, 6, 7, 8}, {9, 10,11,12}, + {13,14,15,16},{17,18,19,20},{21,22,23,24}, + {25,26,27,28},{29,30,31,32},{33,34,35,36}, + {37,38,39,40},{41,42,43,44},{45,46,47,48}}; + +extern int test_vmx(vector int *varray, pid_t *pid); + +int vmx_syscall(void) +{ + pid_t fork_pid; + int i; + int ret; + int child_ret; + for (i = 0; i < 1000; i++) { + /* test_vmx will fork() */ + ret = test_vmx(varray, &fork_pid); + if (fork_pid == -1) + return -1; + if (fork_pid == 0) + exit(ret); + waitpid(fork_pid, &child_ret, 0); + if (ret || child_ret) + return 1; + } + + return 0; +} + +int test_vmx_syscall(void) +{ + /* + * Setup an environment with much context switching + */ + pid_t pid2; + pid_t pid = fork(); + int ret; + int child_ret; + FAIL_IF(pid == -1); + + pid2 = fork(); + ret = vmx_syscall(); + /* Can't FAIL_IF(pid2 == -1); because we've already forked */ + if (pid2 == -1) { + /* + * Couldn't fork, ensure child_ret is set and is a fail + */ + ret = child_ret = 1; + } else { + if (pid2) + waitpid(pid2, &child_ret, 0); + else + exit(ret); + } + + ret |= child_ret; + + if (pid) + waitpid(pid, &child_ret, 0); + else + exit(ret); + + FAIL_IF(ret || child_ret); + return 0; +} + +int main(int argc, char *argv[]) +{ + return test_harness(test_vmx_syscall, "vmx_syscall"); + +} diff --git a/tools/testing/selftests/powerpc/tm/tm-signal-msr-resv.c b/tools/testing/selftests/powerpc/tm/tm-signal-msr-resv.c index d86653f282b1..8c54d18b3e9a 100644 --- a/tools/testing/selftests/powerpc/tm/tm-signal-msr-resv.c +++ b/tools/testing/selftests/powerpc/tm/tm-signal-msr-resv.c @@ -40,7 +40,7 @@ void signal_usr1(int signum, siginfo_t *info, void *uc) #ifdef __powerpc64__ ucp->uc_mcontext.gp_regs[PT_MSR] |= (7ULL << 32); #else - ucp->uc_mcontext.regs->gpr[PT_MSR] |= (7ULL); + ucp->uc_mcontext.uc_regs->gregs[PT_MSR] |= (7ULL); #endif /* Should segv on return becuase of invalid context */ segv_expected = 1; |