| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
tnapi is being initialized and then immediately updated and
hence the initialiation is redundant. Clean up the warning
by moving the declaration and initialization to the inside
of the for-loop.
Cleans up clang scan-build warning:
warning: Value stored to 'tnapi' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the needlessly global function tls_sw_free_resources static to fix
a gcc/sparse warning.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This code causes a static checker warning because Smatch doesn't trust
anything that comes from skb->data. I've reviewed this code and I do
think skb->data can be controlled by the user here.
The sctp_event_subscribe struct has 13 __u8 fields and we want to see
if ours is non-zero. sn_type can be any value in the 0-USHRT_MAX range.
We're subtracting SCTP_SN_TYPE_BASE which is 1 << 15 so we could read
either before the start of the struct or after the end.
This is a very old bug and it's surprising that it would go undetected
for so long but my theory is that it just doesn't have a big impact so
it would be hard to notice.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding myself as a reviewer for the Renesas Ethernet drivers
I somehow forgot about the bindings -- I want to review them as well.
Fixes: 8e6569af3a1b ("MAINTAINERS: add myself as Renesas Ethernet drivers reviewer")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Denys reported wrong rate estimations with HTB classes.
It appears the bug was added in linux-4.10, since my tests
where using intervals of one second only.
HTB using 4 sec default rate estimators, reported rates
were 4x higher.
We need to properly scale the bytes/packets samples before
integrating them in EWMA.
Tested:
echo 1 >/sys/module/sch_htb/parameters/htb_rate_est
Setup HTB with one class with a rate/cail of 5Gbit
Generate traffic on this class
tc -s -d cl sh dev eth0 classid 7002:11
class htb 7002:11 parent 7002:1 prio 5 quantum 200000 rate 5Gbit ceil
5Gbit linklayer ethernet burst 80000b/1 mpu 0b cburst 80000b/1 mpu 0b
level 0 rate_handle 1
Sent 1488215421648 bytes 982969243 pkt (dropped 0, overlimits 0
requeues 0)
rate 5Gbit 412814pps backlog 136260b 2p requeues 0
TCP pkts/rtx 982969327/45 bytes 1488215557414/68130
lended: 22732826 borrowed: 0 giants: 0
tokens: -1684 ctokens: -1684
Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
nfp: wait more carefully for card init
The first patch is a small fix for flower offload, we need a whitelist
of supported matches, otherwise the unsupported ones will be ignored.
The second and the third patch are adding wait/polling to the probe path.
We had reports of driver failing probe because it couldn't find the
control process (NSP) on the card. Turns out the NSP will only announce
its existence after it's fully initialized. Until now we assumed it
will be reachable, just not processing commands (hence we wait for
a NOOP command to execute successfully).
v2:
- fix a bad merge which resulted in a build warning and retest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The control process (NSP) may take some time to complete its
initialization. This is not a problem on most servers, but
on very fast-booting machines it may not be ready for operation
when driver probes the device. There is also a version of the
flash in the wild where NSP tries to train the links as part
of init. To wait for NSP initialization we should make sure
its resource has already been added to the resource table.
NSP adds itself there as last step of init.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Board state informs us which low-level initialization stages the card
has completed. We should wait for the card to be fully initialized
before trying to communicate with it, not only before we configure
passing traffic.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously we did not check the flow dissector against a list of allowed
and supported flow key dissectors. This patch introduces such a list and
correctly rejects unsupported flow keys.
Fixes: 43f84b72c50d ("nfp: add metadata to each flow offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") removed
freeing in call_rcu, which changed already existing hard-to-hit
race condition into 100% hit:
[ 598.599825] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[ 598.607782] IP: tcf_action_destroy+0xc0/0x140
Or:
[ 40.858924] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[ 40.862840] IP: tcf_generic_walker+0x534/0x820
Fix this by storing the ops and use them directly for module_put call.
Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPv6 TSO requests with extension hdrs are a problem to the
Lancer and BEx chips. Workaround is to disable TSO6 feature
for such packets.
Also in Lancer chips, MSS less than 256 was resulting in TX stall.
Fix this by disabling GSO when MSS less than 256.
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A randconfig build caused a compile failure:
drivers/net/ethernet/nuvoton/w90p910_ether.c: In function 'w90p910_ether_close':
drivers/net/ethernet/nuvoton/w90p910_ether.c:580:2: error: implicit declaration of function 'free_irq'; did you mean 'free_uid'? [-Werror=implicit-function-declaration]
Adding the correct include fixes the problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8b426dc54cf4 ("bonding: remove hardcoded value") changed the
default value for tlb_dynamic_lb which lead to either broken ALB mode
(since tlb_dynamic_lb can be changed only in TLB) or setting TLB mode
with tlb_dynamic_lb equal to 0.
The first issue was recently fixed by setting tlb_dynamic_lb to 1 always
when switching to ALB mode, but the default value is still wrong and
we'll enter TLB mode with tlb_dynamic_lb equal to 0 if the mode is
changed via netlink or sysfs. In order to restore the previous behaviour
and default value simply remove the mode check around the default param
initialization for tlb_dynamic_lb which will always set it to 1 as
before.
Fixes: 8b426dc54cf4 ("bonding: remove hardcoded value")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In collect_md mode, if the tun dev is down, it still can call
__ip6_tnl_rcv to receive on packets, and the rx statistics increase
improperly.
When the md tunnel is down, it's not neccessary to increase RX drops
for the tunnel device, packets would be recieved on fallback tunnel,
and the RX drops on fallback device will be increased as expected.
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In collect_md mode, if the tun dev is down, it still can call
ip_tunnel_rcv to receive on packets, and the rx statistics increase
improperly.
When the md tunnel is down, it's not neccessary to increase RX drops
for the tunnel device, packets would be recieved on fallback tunnel,
and the RX drops on fallback device will be increased as expected.
Fixes: 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.")
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When removing the offloading of mirred actions under
matchall classifiers, mlxsw would find the destination port
associated with the offloaded action and utilize it for undoing
the configuration.
Depending on the order by which ports are removed, it's possible that
the destination port would get removed before the source port.
In such a scenario, when actions would be flushed for the source port
mlxsw would perform an illegal dereference as the destination port is
no longer listed.
Since the only item necessary for undoing the configuration on the
destination side is the port-id and that in turn is already maintained
by mlxsw on the source-port, simply stop trying to access the
destination port and use the port-id directly instead.
Fixes: 763b4b70af ("mlxsw: spectrum: Add support in matchall mirror TC offloading")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cong Wang says:
====================
net_sched: fix filter chain reference counting
This patchset fixes tc filter chain reference counting and nasty race
conditions with RCU callbacks. Please see each patch for details.
v3: Rebase on the latest -net
Add code comment in patch 1
Improve comment and changelog for patch 2
Add patch 3
v2: Add patch 1
Get rid of more ugly code in patch 2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As pointed out by Jiri, there is still a race condition between
tcf_block_put() and tcf_chain_destroy() in a RCU callback. There
is no way to make it correct without proper locking or synchronization,
because both operate on a shared list.
Locking is hard, because the only lock we can pick here is a spinlock,
however, in tc_dump_tfilter() we iterate this list with a sleeping
function called (tcf_chain_dump()), which makes using a lock to protect
chain_list almost impossible.
Jiri suggested the idea of holding a refcnt before flushing, this works
because it guarantees us there would be no parallel tcf_chain_destroy()
during the loop, therefore the race condition is gone. But we have to
be very careful with proper synchronization with RCU callbacks.
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the following ugliness of tc filter chain refcnt:
a) tp proto should hold a refcnt to the chain too. This significantly
simplifies the logic.
b) Chain 0 is no longer special, it is created with refcnt=1 like any
other chains. All the ugliness in tcf_chain_put() can be gone!
c) No need to handle the flushing oddly, because block still holds
chain 0, it can not be released, this guarantees block is the last
user.
d) The race condition with RCU callbacks is easier to handle with just
a rcu_barrier(). Much easier to understand, nothing to hide. Thanks
to the previous patch. Please see also the comments in code.
e) Make the code understandable by humans, much less error-prone.
Fixes: 744a4cf63e52 ("net: sched: fix use after free when tcf_chain_destroy is called multiple times")
Fixes: 5bc1701881e3 ("net: sched: introduce multichain support for filters")
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gen estimator has been rewritten in commit 1c0d32fde5bd
("net_sched: gen_estimator: complete rewrite of rate estimators"),
the caller is no longer needed to wait for a grace period.
So this patch gets rid of it.
This also completely closes a race condition between action free
path and filter chain add/remove path for the following patch.
Because otherwise the nested RCU callback can't be caught by
rcu_barrier().
Please see also the comments in code.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Back in linux-4.4, I inadvertently put a call to reqsk_put() in
inet_child_forget(), forgetting it could be called from two different
points.
In the case it is called from inet_csk_reqsk_queue_add(), we want to
keep the reference on the request socket, since it is released later by
the caller (tcp_v{4|6}_rcv())
This bug never showed up because atomic_dec_and_test() was not signaling
the underflow, and SLAB_DESTROY_BY RCU semantic for request sockets
prevented the request to be put in quarantine.
Recent conversion of socket refcount from atomic_t to refcount_t finally
exposed the bug.
So move the reqsk_put() to inet_csk_listen_stop() to fix this.
Thanks to Shankara Pailoor for using syzkaller and providing
a nice set of .config and C repro.
WARNING: CPU: 2 PID: 4277 at lib/refcount.c:186
refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186
Kernel panic - not syncing: panic_on_warn set ...
CPU: 2 PID: 4277 Comm: syz-executor0 Not tainted 4.13.0-rc7 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0xf7/0x1aa lib/dump_stack.c:52
panic+0x1ae/0x3a7 kernel/panic.c:180
__warn+0x1c4/0x1d9 kernel/panic.c:541
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x118/0x340 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:846
RIP: 0010:refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186
RSP: 0018:ffff88006e006b60 EFLAGS: 00010286
RAX: 0000000000000026 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000026 RSI: 1ffff1000dc00d2c RDI: ffffed000dc00d60
RBP: ffff88006e006bf0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000dc00d6d
R13: 00000000ffffffff R14: 0000000000000001 R15: ffff88006ce9d340
refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211
reqsk_put+0x71/0x2b0 include/net/request_sock.h:123
tcp_v4_rcv+0x259e/0x2e20 net/ipv4/tcp_ipv4.c:1729
ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:248 [inline]
ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:477 [inline]
ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:248 [inline]
ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488
__netif_receive_skb_core+0x1fb7/0x31f0 net/core/dev.c:4298
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4336
process_backlog+0x1c5/0x6d0 net/core/dev.c:5102
napi_poll net/core/dev.c:5499 [inline]
net_rx_action+0x6d3/0x14a0 net/core/dev.c:5565
__do_softirq+0x2cb/0xb2d kernel/softirq.c:284
do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:898
</IRQ>
do_softirq.part.16+0x63/0x80 kernel/softirq.c:328
do_softirq kernel/softirq.c:176 [inline]
__local_bh_enable_ip+0x84/0x90 kernel/softirq.c:181
local_bh_enable include/linux/bottom_half.h:31 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:705 [inline]
ip_finish_output2+0x8ad/0x1360 net/ipv4/ip_output.c:231
ip_finish_output+0x74e/0xb80 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:237 [inline]
ip_output+0x1cc/0x850 net/ipv4/ip_output.c:405
dst_output include/net/dst.h:471 [inline]
ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
ip_queue_xmit+0x8c6/0x1810 net/ipv4/ip_output.c:504
tcp_transmit_skb+0x1963/0x3320 net/ipv4/tcp_output.c:1123
tcp_send_ack.part.35+0x38c/0x620 net/ipv4/tcp_output.c:3575
tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3545
tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:5795 [inline]
tcp_rcv_state_process+0x4876/0x4b60 net/ipv4/tcp_input.c:5930
tcp_v4_do_rcv+0x58a/0x820 net/ipv4/tcp_ipv4.c:1483
sk_backlog_rcv include/net/sock.h:907 [inline]
__release_sock+0x124/0x360 net/core/sock.c:2223
release_sock+0xa4/0x2a0 net/core/sock.c:2715
inet_wait_for_connect net/ipv4/af_inet.c:557 [inline]
__inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643
inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682
SYSC_connect+0x204/0x470 net/socket.c:1628
SyS_connect+0x24/0x30 net/socket.c:1609
entry_SYSCALL_64_fastpath+0x18/0xad
RIP: 0033:0x451e59
RSP: 002b:00007f474843fc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 0000000000451e59
RDX: 0000000000000010 RSI: 0000000020002000 RDI: 0000000000000007
RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000000000
R13: 00007ffc040a0f8f R14: 00007f47484409c0 R15: 0000000000000000
Fixes: ebb516af60e1 ("tcp/dccp: fix race at listener dismantle phase")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Shankara Pailoor <sp3485@columbia.edu>
Tested-by: Shankara Pailoor <sp3485@columbia.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All other error handling paths in this function go through the 'error'
label. This one should do the same.
Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configure pause time to 0xffff when tx flow control enabled
Set pause time to 0xffff in the pause frame to indicate the
partner to stop sending the packets. When RX buffer frees up,
the device sends pause frame with pause time zero for partner to
resume transmission.
Fixes: 2f7ca802bdae ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes sparse warning about pointer in gen_handle:
net/sched/cls_rsvp.h:392:40: warning: Using plain integer as NULL pointer
Fixes: 8113c095672f6 ("net_sched: use void pointer for filter handle")
Signed-off-by: Josh Hunt <johunt@akamai.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As seg6_validate_srh() already checks that the Routing Header type is
correct, it is not necessary to do it again in get_srh().
Fixes: 5829d70b ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using bpf_redirect_map is allowed for generic XDP programs, but the
appropriate map lookup was never performed in xdp_do_generic_redirect().
Instead the map-index is directly used as the ifindex. For the
xdp_redirect_map sample in SKB-mode '-S', this resulted in trying
sending on ifindex 0 which isn't valid, resulting in getting SKB
packets dropped. Thus, the reported performance numbers are wrong in
commit 24251c264798 ("samples/bpf: add option for native and skb mode
for redirect apps") for the 'xdp_redirect_map -S' case.
Before commit 109980b894e9 ("bpf: don't select potentially stale
ri->map from buggy xdp progs") it could crash the kernel. Like this
commit also check that the map_owner owner is correct before
dereferencing the map pointer. But make sure that this API misusage
can be caught by a tracepoint. Thus, allowing userspace via
tracepoints to detect misbehaving bpf_progs.
Fixes: 6103aa96ec07 ("net: implement XDP_REDIRECT for xdp generic")
Fixes: 24251c264798 ("samples/bpf: add option for native and skb mode for redirect apps")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
clang does not support variable length array for structure member.
It has the following error during compilation:
kernel/trace/trace_syscalls.c:568:17: error: fields must have a constant size:
'variable length array in structure' extension will never be supported
unsigned long args[sys_data->nb_args];
^
The fix is to use a fixed array length instead.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit cbf5ecb30560 ("net: bonding: Fix transmit load balancing in
balance-alb mode") tried to fix transmit dynamic load balancing in
balance-alb mode, which wasn't working after commit 8b426dc54cf4
("bonding: remove hardcoded value").
It turned out that my previous patch only fixed the case when
balance-alb was specified as bonding module parameter, and not when
balance-alb mode was set using /sys/class/net/*/bonding/mode (the most
common usage). In the latter case, tlb_dynamic_lb was set up according
to the default mode of the bonding interface, which happens to be
balance-rr.
This additional patch addresses this issue by setting up tlb_dynamic_lb
to 1 if "mode" is set to balance-alb through the sysfs interface.
I didn't add code to change tlb_balance_lb back to the default value for
other modes, because "mode" is usually set up only once during
initialization, and it's not worthwhile to change the static variable
bonding_defaults in bond_main.c to a global variable just for this
purpose.
Commit 8b426dc54cf4 also changes the value of tlb_dynamic_lb for
balance-tlb mode if it is set up using the sysfs interface. I didn't
change that behavior, because the value of tlb_balance_lb can be changed
using the sysfs interface for balance-tlb, and I didn't like changing
the default value back and forth for balance-tlb.
As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be
written to. However, I think balance-alb with tlb_dynamic_lb set to 0
is not an intended usage, so there is little use making it writable at
this moment.
Fixes: 8b426dc54cf4 ("bonding: remove hardcoded value")
Reported-by: Reinis Rozitis <r@roze.lv>
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Cc: stable@vger.kernel.org # v4.12+
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only need to wakeup the initiator after all sub-channels
are opened.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a virtual device is added dynamically (via host console), then
the vmbus sends an offer message for the primary channel. The processing
of this message for networking causes the network device to then
initialize the sub channels.
The problem is that setting up the sub channels needs to wait until
the subsequent subchannel offers have been processed. These offers
come in on the same ring buffer and work queue as where the primary
offer is being processed; leading to a deadlock.
This did not happen in older kernels, because the sub channel waiting
logic was broken (it wasn't really waiting).
The solution is to do the sub channel setup in its own work queue
context that is scheduled by the primary channel setup; and then
happens later.
Fixes: 732e49850c5e ("netvsc: fix race on sub channel creation")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code does not handle correctly the access to the upper page
in case of SFP/SFP+ EEPROM. In that case the offset should be local
and the I2C address should be changed.
Fixes: 2ea109039cd3 ("mlxsw: spectrum: Add support for access cable info via ethtool")
Reported-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a typo here so we accidentally free "skb" instead of "skbn".
It leads to a double free and a leak. After discussing with Subash,
it's better to just move the check before the allocation and avoid the
need to free.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull nfsd updates from Bruce Fields:
"More RDMA work and some op-structure constification from Chuck Lever,
and a small cleanup to our xdr encoding"
* tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux:
svcrdma: Estimate Send Queue depth properly
rdma core: Add rdma_rw_mr_payload()
svcrdma: Limit RQ depth
svcrdma: Populate tail iovec when receiving
nfsd: Incoming xdr_bufs may have content in tail buffer
svcrdma: Clean up svc_rdma_build_read_chunk()
sunrpc: Const-ify struct sv_serv_ops
nfsd: Const-ify NFSv4 encoding and decoding ops arrays
sunrpc: Const-ify instances of struct svc_xprt_ops
nfsd4: individual encoders no longer see error cases
nfsd4: skip encoder in trivial error cases
nfsd4: define ->op_release for compound ops
nfsd4: opdesc will be useful outside nfs4proc.c
nfsd4: move some nfsd4 op definitions to xdr4.h
|
|
Pull btrfs updates from David Sterba:
"The changes range through all types: cleanups, core chagnes, sanity
checks, fixes, other user visible changes, detailed list below:
- deprecated: user transaction ioctl
- mount option ssd does not change allocation alignments
- degraded read-write mount is allowed if all the raid profile
constraints are met, now based on more accurate check
- defrag: do not reset compression afterwards; the NOCOMPRESS flag
can be now overriden by defrag
- prep work for better extent reference tracking (related to the
qgroup slowness with balance)
- prep work for compression heuristics
- memory allocation reductions (may help latencies on a loaded
system)
- better accounting for io waiting states
- error handling improvements (removed BUGs)
- added more sanity checks for shared refs
- fix readdir vs pagefault deadlock under some circumstances
- fix for 'no-hole' mode, certain combination of compressed and
inline extents
- send: fix emission of invalid clone operations
- fixup file mode if setting acls fail
- more fixes from fuzzing
- oher cleanups"
* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits)
btrfs: submit superblock io with REQ_META and REQ_PRIO
btrfs: remove unnecessary memory barrier in btrfs_direct_IO
btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent
btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent
btrfs: pass fs_info to btrfs_del_root instead of tree_root
Btrfs: add one more sanity check for shared ref type
Btrfs: remove BUG_ON in __add_tree_block
Btrfs: remove BUG() in add_data_reference
Btrfs: remove BUG() in print_extent_item
Btrfs: remove BUG() in btrfs_extent_inline_ref_size
Btrfs: convert to use btrfs_get_extent_inline_ref_type
Btrfs: add a helper to retrive extent inline ref type
btrfs: scrub: simplify scrub worker initialization
btrfs: scrub: clean up division in scrub_find_csum
btrfs: scrub: clean up division in __scrub_mark_bitmap
btrfs: scrub: use bool for flush_all_writes
btrfs: preserve i_mode if __btrfs_set_acl() fails
btrfs: Remove extraneous chunk_objectid variable
btrfs: Remove chunk_objectid argument from btrfs_make_block_group
btrfs: Remove extra parentheses from condition in copy_items()
...
|
|
Pull followup block layer updates from Jens Axboe:
"I ended up splitting the main pull request for this series into two,
mainly because of clashes between NVMe fixes that went into 4.13 after
the for-4.14 branches were split off. This pull request is mostly
NVMe, but not exclusively. In detail, it contains:
- Two pull request for NVMe changes from Christoph. Nothing new on
the feature front, basically just fixes all over the map for the
core bits, transport, rdma, etc.
- Series from Bart, cleaning up various bits in the BFQ scheduler.
- Series of bcache fixes, which has been lingering for a release or
two. Coly sent this in, but patches from various people in this
area.
- Set of patches for BFQ from Paolo himself, updating both
documentation and fixing some corner cases in performance.
- Series from Omar, attempting to now get the 4k loop support
correct. Our confidence level is higher this time.
- Series from Shaohua for loop as well, improving O_DIRECT
performance and fixing a use-after-free"
* 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits)
bcache: initialize dirty stripes in flash_dev_run()
loop: set physical block size to logical block size
bcache: fix bch_hprint crash and improve output
bcache: Update continue_at() documentation
bcache: silence static checker warning
bcache: fix for gc and write-back race
bcache: increase the number of open buckets
bcache: Correct return value for sysfs attach errors
bcache: correct cache_dirty_target in __update_writeback_rate()
bcache: gc does not work when triggering by manual command
bcache: Don't reinvent the wheel but use existing llist API
bcache: do not subtract sectors_to_gc for bypassed IO
bcache: fix sequential large write IO bypass
bcache: Fix leak of bdev reference
block/loop: remove unused field
block/loop: fix use after free
bfq: Use icq_to_bic() consistently
bfq: Suppress compiler warnings about comparisons
bfq: Check kstrtoul() return value
bfq: Declare local functions static
...
|
|
Pull networking fixes from David Miller:
"The iwlwifi firmware compat fix is in here as well as some other
stuff:
1) Fix request socket leak introduced by BPF deadlock fix, from Eric
Dumazet.
2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.
3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
Gao Feng.
4) Use after free in netlink nlk groups handling, from Xin Long.
5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.
6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
with follow-on fix from Eric Dumazet.
7) Need RCU and preemption disabled during generic XDP data patch,
from John Fastabend"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
Revert "mdio_bus: Remove unneeded gpiod NULL check"
bpf: devmap, use cond_resched instead of cpu_relax
bpf: add support for sockmap detach programs
net: rcu lock and preempt disable missing around generic xdp
bpf: don't select potentially stale ri->map from buggy xdp progs
net: tulip: Constify tulip_tbl
net: ethernet: ti: netcp_core: no need in netif_napi_del
davicom: Display proper debug level up to 6
net: phy: sfp: rename dt properties to match the binding
dt-binding: net: sfp binding documentation
dt-bindings: add SFF vendor prefix
dt-bindings: net: don't confuse with generic PHY property
ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
ip_tunnel: fix setting ttl and tos value in collect_md mode
ipv6: fix typo in fib6_net_exit()
tcp: fix a request socket leak
sctp: fix missing wake ups in some situations
netfilter: xt_hashlimit: fix build error caused by 64bit division
netfilter: xt_hashlimit: alloc hashtable with right size
...
|
|
Merge more updates from Andrew Morton:
- most of the rest of MM
- a small number of misc things
- lib/ updates
- checkpatch
- autofs updates
- ipc/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
ipc: optimize semget/shmget/msgget for lots of keys
ipc/sem: play nicer with large nsops allocations
ipc/sem: drop sem_checkid helper
ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
ipc: convert ipc_namespace.count from atomic_t to refcount_t
kcov: support compat processes
sh: defconfig: cleanup from old Kconfig options
mn10300: defconfig: cleanup from old Kconfig options
m32r: defconfig: cleanup from old Kconfig options
drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
drivers/pps: aesthetic tweaks to PPS-related content
cpumask: make cpumask_next() out-of-line
kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
kmod: split off umh headers into its own file
MAINTAINERS: clarify kmod is just a kernel module loader
kmod: split out umh code into its own file
test_kmod: flip INT checks to be consistent
test_kmod: remove paranoid UINT_MAX check on uint range processing
vfat: deduplicate hex2bin()
...
|
|
I removed all the gperf use, but not the Makefile rules. Sam Ravnborg
says I get bonus points for cleaning this up. I'll hold him to it.
Requested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Differ between illegal XDP action code and just driver
unsupported one to provide better feedback when we throw
a one-time warning here. Reason is that with 814abfabef3c
("xdp: add bpf_redirect helper function") not all drivers
support the new XDP return code yet and thus they will
fall into their 'default' case when checking for return
codes after program return, which then triggers a
bpf_warn_invalid_xdp_action() stating that the return
code is illegal, but from XDP perspective it's not.
I decided not to place something like a XDP_ACT_MAX define
into uapi i) given we don't have this either for all other
program types, ii) future action codes could have further
encoding there, which would render such define unsuitable
and we wouldn't be able to rip it out again, and iii) we
rarely add new action codes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 95b80bf3db03c2bf572a357cf74b9a6aefef0a4a ("mdio_bus:
Remove unneeded gpiod NULL check"), this commit assumed that GPIOLIB
checks for NULL descriptors, so it's safe to drop them, but it is not
when CONFIG_GPIOLIB is disabled in the kernel. If we do call
gpiod_set_value_cansleep() on a GPIO descriptor we will issue warnings
coming from the inline stubs declared in include/linux/gpio/consumer.h.
Fixes: 95b80bf3db03 ("mdio_bus: Remove unneeded gpiod NULL check")
Reported-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
John Fastabend says:
====================
net: Fixes for XDP/BPF
The following fixes, UAPI updates, and small improvement,
i. XDP needs to be called inside RCU with preempt disabled.
ii. Not strictly a bug fix but we have an attach command in the
sockmap UAPI already to avoid having a single kernel released with
only the attach and not the detach I'm pushing this into net branch.
Its early in the RC cycle so I think this is OK (not ideal but better
than supporting a UAPI with a missing detach forever).
iii. Final patch replace cpu_relax with cond_resched in devmap.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Be a bit more friendly about waiting for flush bits to complete.
Replace the cpu_relax() with a cond_resched().
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bpf map sockmap supports adding programs via attach commands. This
patch adds the detach command to keep the API symmetric and allow
users to remove previously added programs. Otherwise the user would
have to delete the map and re-add it to get in this state.
This also adds a series of additional tests to capture detach operation
and also attaching/detaching invalid prog types.
API note: socks will run (or not run) programs depending on the state
of the map at the time the sock is added. We do not for example walk
the map and remove programs from previously attached socks.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
do_xdp_generic must be called inside rcu critical section with preempt
disabled to ensure BPF programs are valid and per-cpu variables used
for redirect operations are consistent. This patch ensures this is true
and fixes the splat below.
The netif_receive_skb_internal() code path is now broken into two rcu
critical sections. I decided it was better to limit the preempt_enable/disable
block to just the xdp static key portion and the fallout is more
rcu_read_lock/unlock calls. Seems like the best option to me.
[ 607.596901] =============================
[ 607.596906] WARNING: suspicious RCU usage
[ 607.596912] 4.13.0-rc4+ #570 Not tainted
[ 607.596917] -----------------------------
[ 607.596923] net/core/dev.c:3948 suspicious rcu_dereference_check() usage!
[ 607.596927]
[ 607.596927] other info that might help us debug this:
[ 607.596927]
[ 607.596933]
[ 607.596933] rcu_scheduler_active = 2, debug_locks = 1
[ 607.596938] 2 locks held by pool/14624:
[ 607.596943] #0: (rcu_read_lock_bh){......}, at: [<ffffffff95445ffd>] ip_finish_output2+0x14d/0x890
[ 607.596973] #1: (rcu_read_lock_bh){......}, at: [<ffffffff953c8e3a>] __dev_queue_xmit+0x14a/0xfd0
[ 607.597000]
[ 607.597000] stack backtrace:
[ 607.597006] CPU: 5 PID: 14624 Comm: pool Not tainted 4.13.0-rc4+ #570
[ 607.597011] Hardware name: Dell Inc. Precision Tower 5810/0HHV7N, BIOS A17 03/01/2017
[ 607.597016] Call Trace:
[ 607.597027] dump_stack+0x67/0x92
[ 607.597040] lockdep_rcu_suspicious+0xdd/0x110
[ 607.597054] do_xdp_generic+0x313/0xa50
[ 607.597068] ? time_hardirqs_on+0x5b/0x150
[ 607.597076] ? mark_held_locks+0x6b/0xc0
[ 607.597088] ? netdev_pick_tx+0x150/0x150
[ 607.597117] netif_rx_internal+0x205/0x3f0
[ 607.597127] ? do_xdp_generic+0xa50/0xa50
[ 607.597144] ? lock_downgrade+0x2b0/0x2b0
[ 607.597158] ? __lock_is_held+0x93/0x100
[ 607.597187] netif_rx+0x119/0x190
[ 607.597202] loopback_xmit+0xfd/0x1b0
[ 607.597214] dev_hard_start_xmit+0x127/0x4e0
Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Fixes: b5cdae3291f7 ("net: Generic XDP")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can potentially run into a couple of issues with the XDP
bpf_redirect_map() helper. The ri->map in the per CPU storage
can become stale in several ways, mostly due to misuse, where
we can then trigger a use after free on the map:
i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT
and running on a driver not supporting XDP_REDIRECT yet. The
ri->map on that CPU becomes stale when the XDP program is unloaded
on the driver, and a prog B loaded on a different driver which
supports XDP_REDIRECT return code. prog B would have to omit
calling to bpf_redirect_map() and just return XDP_REDIRECT, which
would then access the freed map in xdp_do_redirect() since not
cleared for that CPU.
ii) prog A is calling bpf_redirect_map(), returning a code other
than XDP_REDIRECT. prog A is then detached, which triggers release
of the map. prog B is attached which, similarly as in i), would
just return XDP_REDIRECT without having called bpf_redirect_map()
and thus be accessing the freed map in xdp_do_redirect() since
not cleared for that CPU.
iii) prog A is attached to generic XDP, calling the bpf_redirect_map()
helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is
currently not handling ri->map (will be fixed by Jesper), so it's
not being reset. Later loading a e.g. native prog B which would,
say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would
find in xdp_do_redirect() that a map was set and uses that causing
use after free on map access.
Fix thus needs to avoid accessing stale ri->map pointers, naive
way would be to call a BPF function from drivers that just resets
it to NULL for all XDP return codes but XDP_REDIRECT and including
XDP_REDIRECT for drivers not supporting it yet (and let ri->map
being handled in xdp_do_generic_redirect()). There is a less
intrusive way w/o letting drivers call a reset for each BPF run.
The verifier knows we're calling into bpf_xdp_redirect_map()
helper, so it can do a small insn rewrite transparent to the prog
itself in the sense that it fills R4 with a pointer to the own
bpf_prog. We have that pointer at verification time anyway and
R4 is allowed to be used as per calling convention we scratch
R0 to R5 anyway, so they become inaccessible and program cannot
read them prior to a write. Then, the helper would store the prog
pointer in the current CPUs struct redirect_info. Later in
xdp_do_*_redirect() we check whether the redirect_info's prog
pointer is the same as passed xdp_prog pointer, and if that's
the case then all good, since the prog holds a ref on the map
anyway, so it is always valid at that point in time and must
have a reference count of at least 1. If in the unlikely case
they are not equal, it means we got a stale pointer, so we clear
and bail out right there. Also do reset map and the owning prog
in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and
bpf_xdp_redirect() won't get mixed up, only the last call should
take precedence. A tc bpf_redirect() doesn't use map anywhere
yet, so no need to clear it there since never accessed in that
layer.
Note that in case the prog is released, and thus the map as
well we're still under RCU read critical section at that time
and have preemption disabled as well. Once we commit with the
__dev_map_insert_ctx() from xdp_do_redirect_map() and set the
map to ri->map_to_flush, we still wait for a xdp_do_flush_map()
to finish in devmap dismantle time once flush_needed bit is set,
so that is fine.
Fixes: 97f91a7cf04f ("bpf: add bpf_redirect_map helper routine")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It looks like all users of tulip_tbl are reads, so mark this table
as read-only.
$ git grep tulip_tbl # edited to avoid line-wraps...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
pnic.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tulip.h: extern struct tulip_chip_table tulip_tbl[];
tulip_core.c:struct tulip_chip_table tulip_tbl[] = {
tulip_core.c:iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
tulip_core.c:iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tulip_core.c:setup_timer(&tp->timer, tulip_tbl[tp->chip_id].media_timer,
tulip_core.c:const char *chip_name = tulip_tbl[chip_idx].chip_name;
tulip_core.c:if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size)
tulip_core.c:ioaddr = pci_iomap(..., tulip_tbl[chip_idx].io_size);
tulip_core.c:tp->flags = tulip_tbl[chip_idx].flags;
tulip_core.c:setup_timer(&tp->timer, tulip_tbl[tp->chip_id].media_timer,
tulip_core.c:INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task);
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: netdev@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't remove rx_napi specifically just before free_netdev(),
it's supposed to be done in it and is confusing w/o tx_napi deletion.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will make it explicit some messages are of the form:
dm9000_dbg(db, 5, ...
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the Rx rate select control gpio property name match the documented
binding. This would make the addition of 'rate-select1-gpios' for SFP+
support more natural.
Also, make the MOD-DEF0 gpio property name match the documentation.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add device-tree binding documentation SFP transceivers. Support for SFP
transceivers has been recently introduced (drivers/net/phy/sfp.c).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Colin Ian King
Tobias Klauser
Dan Carpenter
Sergei Shtylyov
Eric Dumazet
David S. Miller
Jakub Kicinski
Pieter Jansen van Vuuren
Jiri Pirko
Suresh Reddy
Arnd Bergmann
Nikolay Aleksandrov
Haishuang Yan
Yuval Mintz
Cong Wang
Christophe JAILLET
Nisar Sayed
Josh Hunt
David Lebrun
Jesper Dangaard Brouer
Yonghong Song
Kosuke Tatsukawa
Stephen Hemminger
Arkadi Sharshevsky
Linus Torvalds
Daniel Borkmann
Florian Fainelli
John Fastabend
Kees Cook
Ivan Khoronzhuk
Mathieu Malaterre
Baruch Siach