| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The aspeed pinctrl parent node (SCU) in the examples is missing various
properties. Add the properties in preparation for the SCU schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220810161635.73936-2-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for Avid Mbox3 USB audio interface at 48kHz
Signed-off-by: Conner Knox <connerknoxpublic@gmail.com>
Link: https://lore.kernel.org/r/20220818201433.16360-1-mbarriolinares@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We dropped the x86-specific hack for WC-page allocations with a hope
that the standard dma_alloc_wc() works nowadays. Alas, it doesn't,
and we need to take back some workaround again, but in a different
form, as the previous one was broken for some platforms.
This patch re-introduces the x86-specific WC-page allocations, but it
uses rather the manual page allocations instead of
dma_alloc_coherent(). The use of dma_alloc_coherent() was also a
potential problem in the recent addition of the fallback allocation
for noncontig pages, and this patch eliminates both at once.
Fixes: 9882d63bea14 ("ALSA: memalloc: Drop x86-specific hack for WC allocations")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/20220821155911.10715-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If re-initialization results is a different signal voltage, because the
voltage switch failed previously, but not this time (or vice versa), then
sd3_bus_mode will be inconsistent with the card because the SD_SWITCH
command is done only upon first initialization.
Fix by always reading SD_SWITCH information during re-initialization, which
also means it does not need to be re-read later for the 1.8V fixup
workaround.
Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added
about 1% to 1.5% to the re-initialization time, so it's not particularly
significant.
Reported-by: Seunghui Lee <sh043.lee@samsung.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Tested-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When introduced, upon success, the 1.8V fixup workaround in
mmc_sd_init_card() would branch to practically the end of the function, to
a label named "done". Unfortunately, perhaps due to the label name, over
time new code has been added that really should have come after "done" not
before it. Let's fix the problem by moving the label to the correct place
and rename it "cont".
Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
While looking at our current POSIX ACL handling in the context of some
overlayfs work I went through a range of other filesystems checking how they
handle them currently and encountered ntfs3.
The posic_acl_{from,to}_xattr() helpers always need to operate on the
filesystem idmapping. Since ntfs3 can only be mounted in the initial user
namespace the relevant idmapping is init_user_ns.
The posix_acl_{from,to}_xattr() helpers are concerned with translating between
the kernel internal struct posix_acl{_entry} and the uapi struct
posix_acl_xattr_{header,entry} and the kernel internal data structure is cached
filesystem wide.
Additional idmappings such as the caller's idmapping or the mount's idmapping
are handled higher up in the VFS. Individual filesystems usually do not need to
concern themselves with these.
The posix_acl_valid() helper is concerned with checking whether the values in
the kernel internal struct posix_acl can be represented in the filesystem's
idmapping. IOW, if they can be written to disk. So this helper too needs to
take the filesystem's idmapping.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: ntfs3@lists.linux.dev
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
TCP_LISTEN sockets is a special case. They preserve skb with a newly
connected sock till accept() makes it fully functional socket.
Receive queue of such socket may grow after connected peer
send messages there. Since these messages may contain scm_fds,
we should expose correct fdinfo::scm_fds for listening socket too.
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSC 1.2 is supported from MTL, hence program ICH accordingly.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817124516.284456-2-jani.nikula@intel.com
|
|
From MTL onwards we support DSC 1.2, since there is hardcoding to minor
version 1, update it.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817124516.284456-1-jani.nikula@intel.com
|
|
Intel Meteor Lake has the same integrated Thunderbolt/USB4 controller as
Intel Alder Lake. Add the Intel Meteor Lake PCI IDs to the driver list
of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This makes it consistent with the previous generations. No functional
impact.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Commit 20f85ef89d94 ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().
Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.
v2: reworked on top of the patch commit 20f85ef89d94
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)
Fixes: 20f85ef89d94 ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com
|
|
If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
As the possible failure of the kmalloc(), it should be better
to fix this error path, check and return '-ENOMEM' error code.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The double `was' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This reverts commit b160628e9ebcdc85d0db9d7f423c26b3c7c179d0.
There is no need any longer to have this sanity check, because the
previous commit ("parisc: Make CONFIG_64BIT available for ARCH=parisc64
only") prevents that CONFIG_64BIT is set if ARCH==parisc.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With this patch the ARCH= parameter decides if the
CONFIG_64BIT option will be set or not. This means, the
ARCH= parameter will give:
ARCH=parisc -> 32-bit kernel
ARCH=parisc64 -> 64-bit kernel
This simplifies the usage of the other config options like
randconfig, allmodconfig and allyesconfig a lot and produces
the output which is expected for parisc64 (64-bit) vs. parisc (32-bit).
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> # 5.15+
|
|
The pin numbers for UFS_RESET and SDC2_* are not
consistent in the pinctrl driver for sc8180x.
So fix it.
Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220807122645.13830-3-mollysophia379@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Currently in the wakeirq_map, gpio36 and gpio37 have the same wakeirq
number, resulting in gpio37 being unable to trigger interrupts.
It looks like that this is a typo in the wakeirq map. So fix it.
Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220807122645.13830-2-mollysophia379@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Macro PIN_GRP() is not used, remove it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805122202.23174-4-pali@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Now when all MPP pins are properly defined and every MPP pin has GPIO
function, always checks for errors in armada_37xx_gpio_request_enable()
function when calling armada_37xx_pmx_set_by_name(). Function
armada_37xx_pmx_set_by_name() should not return "not supported" error
anymore for any GPIO pin when requesting GPIO mode.
Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220805122202.23174-3-pali@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
All 3 MPP pins (20, 21 and 22) can be configured individually and also can
be configured to GPIO functions. Fix definitions for these MPP pins in
existing pin groups. After this change GPIO function can be enabled just
for one of these 3 pins.
Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805122202.23174-2-pali@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
gpio1_5 and gpio2_2 are GPIO-only pins. Add them into MPP groups table
so they are properly exported as valid pin numbers.
Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805122202.23174-1-pali@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
RV1126 has five GPIOs groups - GPIO0 in PD_MMU and GPIO1-4
in PD_BUS.
In GPIO0, up to Lower C group GPIO0_C[3:0] is part of PMU
but rest of the groups from there are part of GRF.
Added pinctrl support for RV1126 and the pull, drv and schmitt
calculations are inferred from [1] authored by Jianqun Xu.
[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/pinctrl/pinctrl-rockchip.c
Cc: linux-gpio@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220818124132.125304-8-jagan@edgeble.ai
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Document dt-bindings for RV1126 SoC pinctrl support.
Cc: linux-gpio@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220818124132.125304-7-jagan@edgeble.ai
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add conditional compilation for struct r9a07g044_cpg_info, so the
compiler won't allocate any memory for this variable in case
CONFIG_CLK_R9A07G044 is disabled.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220804082605.157269-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220726210110.1444-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220804190846.128370-1-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As per the RZ/G2UL Hardware User's Manual (Rev.1.00 Apr, 2022),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: cf40c9689e5109bf ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Link: https://lore.kernel.org/r/20220802101534.1401342-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As per the RZ/V2L Hardware User's Manual (Rev.1.00 Nov, 2021),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 7c2b8198f4f321df ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Link: https://lore.kernel.org/r/20220802101534.1401342-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: f9a2adcc9e908907 ("arm64: dts: renesas: r9a07g044: Add SCI[0-1] nodes")
Link: https://lore.kernel.org/r/20220802101534.1401342-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Replace the clk node names audio-clk{1,2} with audio{1,2}-clk as per
the device tree specification.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220729084527.388023-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add DMA properties to RSPI nodes to support DMA operation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220728122312.189766-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add DMA properties to RSPI nodes to support DMA operation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220728122312.189766-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add DMA properties to RSPI nodes to support DMA operation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220728122312.189766-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220726210110.1444-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption.
Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yv8dpCFZJdbUT5ye@kili
|
|
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8bf ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
|
|
PPC64 removed default mapping address from VDSO in
commit 30d0b3682887 ("powerpc: Move 64bit VDSO to improve context
switch performance").
Do like PPC64 and let get_unmapped_area() place the VDSO mapping
at the address it wants, don't force a default address.
This allows randomisation of VDSO address.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cba76f5a5b01fcc49415e632d92c11c1c5998cab.1660843877.git.christophe.leroy@csgroup.eu
|
|
Use timersub() function to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220816105106.82666-1-ye.xingchen@zte.com.cn
|
|
Prior to the commit below the GAMT_CHKN_BIT_REG address was setup for
devices matching (D_KBL | D_CFL), where intel_gvt_get_device_type()
returns D_CFL for either Coffee Lake or Comet Lake. Include the missed
platform.`
Link: https://lore.kernel.org/all/20220808142711.02d16782.alex.williamson@redhat.com
Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/166016852965.780835.10366587502693016900.stgit@omen
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
There is a spelling mistake in a gvt_vgpu_err error message. Fix it.
Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
Call trace:
ww_mutex_lock+0x28/0x32c
drm_modeset_lock_all_ctx+0x1b0/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Kernel Offset: 0x495d77c00000 from 0xffff800008000000
PHYS_OFFSET: 0xffffcd8500000000
CPU features: 0x800,00c2a015,19801c82
Memory Limit: none
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com
|
|
The SoM itself provides the display interface, see [1] page 20.
Those pins have to be used as the RGB/DPI interface or not used
at all. So rather than duplicate the pinmux settings in every
carrier board DT, better move them into the SoM DTSI.
[1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx6ull-kontron-bl.dtb wasn't build as part of the
CONFIG_SOC_IMX6UL option. Add it to the list.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no need in differentiating between the different SoM versions
that only differ in memory size, etc. It's much cleaner to simplify
the devicetrees and let them be more generic.
If necessary the bootloader will update the devicetree dynamically
to contain the correct size of the memory.
We also get rid of the N6xxx notation in the compatibles and file
names, as they are not really used anymore and often result in
confusion.
This is a breaking change, but the impact shouldn't be too big and it
makes usage and maintenance easier in the future.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix reset GPIO polarity in-line with the following commit feedaacdadfc
("Input: atmel_mxt_ts - fix up inverted RESET handler").
Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix reset GPIO polarity in-line with the following commit feedaacdadfc
("Input: atmel_mxt_ts - fix up inverted RESET handler").
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix copy-paste error of the I2C5 bus recovery GPIO assignment,
the I2C5 GPIOs are on gpio3 instead of gpio5.
Fixes: 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Rob Herring
Conner Knox
Takashi Iwai
Adrian Hunter
Christian Brauner
Kirill Tkhai
Vandita Kulkarni
Mika Westerberg
Arun R Murthy
Helge Deller
Li Qiong
Wolfram Sang
Jason Wang
Molly Sophia
Pali Rohár
Jagan Teki
Biju Das
Phil Edworthy
Dan Carpenter
Rustam Subkhankulov
Christophe Leroy
ye xingchen
Alex Williamson
Colin Ian King
Javier Martinez Canillas
Christoph Niedermaier
Frieder Schrempf
Marcel Ziswiler
Marek Vasut