| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* kvm-arm64/fpsimd-doc:
: .
: FPSIMD documentation update, courtesy of Mark Brown
: .
arm64/fpsimd: Clarify the purpose of using last in fpsimd_save()
KVM: arm64: Add some more comments in kvm_hyp_handle_fpsimd()
KVM: arm64: Add comments for context flush and sync callbacks
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When saving the floating point context in fpsimd_save() we always reference
the state using last-> rather than using current->. Looking at the FP code
in isolation the reason for this is not entirely obvious, it's done because
when KVM is running it will bind the guest context and rely on the host
writing out the guest state on context switch away from the guest.
There's a slight trick here in that KVM still uses TIF_FOREIGN_FPSTATE and
TIF_SVE to communicate what needs to be saved, it maintains those flags
and restores them when it is done running the guest so that the normal
restore paths function when we return back to userspace.
Add a comment to explain this to help future readers work out what's going
on a bit faster.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124161115.115200-1-broonie@kernel.org
|
|
The handling for FPSIMD/SVE traps is multi stage and involves some trap
manipulation which isn't quite so immediately obvious as might be desired
so add a few more comments.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124155720.3943374-3-broonie@kernel.org
|
|
Add a little bit of information on where _ctxflush_fp() and _ctxsync_fp()
are called to help people unfamiliar with the code get up to speed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220124155720.3943374-2-broonie@kernel.org
|
|
* kvm-arm64/mmu-rwlock:
: .
: MMU locking optimisations from Jing Zhang, allowing permission
: relaxations to occur in parallel.
: .
KVM: selftests: Add vgic initialization for dirty log perf test for ARM
KVM: arm64: Add fast path to handle permission relaxation during dirty logging
KVM: arm64: Use read/write spin lock for MMU protection
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For ARM64, if no vgic is setup before the dirty log perf test, the
userspace irqchip would be used, which would affect the dirty log perf
test result.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220118015703.3630552-4-jingzhangos@google.com
|
|
To reduce MMU lock contention during dirty logging, all permission
relaxation operations would be performed under read lock.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220118015703.3630552-3-jingzhangos@google.com
|
|
Replace MMU spinlock with rwlock and update all instances of the lock
being acquired with a write lock acquisition.
Future commit will add a fast path for permission relaxation during
dirty logging under a read lock.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220118015703.3630552-2-jingzhangos@google.com
|
|
* kvm-arm64/oslock:
: .
: Debug OS-Lock emulation courtesy of Oliver Upton. From the cover letter:
:
: "KVM does not implement the debug architecture to the letter of the
: specification. One such issue is the fact that KVM treats the OS Lock as
: RAZ/WI, rather than emulating its behavior on hardware. This series adds
: emulation support for the OS Lock to KVM. Emulation is warranted as the
: OS Lock affects debug exceptions taken from all ELs, and is not limited
: to only the context of the guest."
: .
selftests: KVM: Test OS lock behavior
selftests: KVM: Add OSLSR_EL1 to the list of blessed regs
KVM: arm64: Emulate the OS Lock
KVM: arm64: Allow guest to set the OSLK bit
KVM: arm64: Stash OSLSR_EL1 in the cpu context
KVM: arm64: Correctly treat writes to OSLSR_EL1 as undefined
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Link: https://lore.kernel.org/r/20211224161334.31123-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
KVM now correctly handles the OS Lock for its guests. When set, KVM
blocks all debug exceptions originating from the guest. Add test cases
to the debug-exceptions test to assert that software breakpoint,
hardware breakpoint, watchpoint, and single-step exceptions are in fact
blocked.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-7-oupton@google.com
|
|
OSLSR_EL1 is now part of the visible system register state. Add it to
the get-reg-list selftest to ensure we keep it that way.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-6-oupton@google.com
|
|
The OS lock blocks all debug exceptions at every EL. To date, KVM has
not implemented the OS lock for its guests, despite the fact that it is
mandatory per the architecture. Simple context switching between the
guest and host is not appropriate, as its effects are not constrained to
the guest context.
Emulate the OS Lock by clearing MDE and SS in MDSCR_EL1, thereby
blocking all but software breakpoint instructions.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-5-oupton@google.com
|
|
Allow writes to OSLAR and forward the OSLK bit to OSLSR. Do nothing with
the value for now.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-4-oupton@google.com
|
|
An upcoming change to KVM will emulate the OS Lock from the PoV of the
guest. Add OSLSR_EL1 to the cpu context and handle reads using the
stored value. Define some mnemonics for for handling the OSLM field and
use them to make the reset value of OSLSR_EL1 more readable.
Wire up a custom handler for writes from userspace and prevent any of
the invariant bits from changing. Note that the OSLK bit is not
invariant and will be made writable by the aforementioned change.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-3-oupton@google.com
|
|
Writes to OSLSR_EL1 are UNDEFINED and should never trap from EL1 to
EL2, but the kvm trap handler for OSLSR_EL1 handles writes via
ignore_write(). This is confusing to readers of code, but should have
no functional impact.
For clarity, use write_to_read_only() rather than ignore_write(). If a
trap is unexpectedly taken to EL2 in violation of the architecture, this
will WARN_ONCE() and inject an undef into the guest.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
[adopted Mark's changelog suggestion, thanks!]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220203174159.2887882-2-oupton@google.com
|
|
->sock can be set to NULL asynchronously unless ->recv_mutex is held.
So it is important to hold that mutex. Otherwise a sysfs read can
trigger an oops.
Commit 17f09d3f619a ("SUNRPC: Check if the xprt is connected before
handling sysfs reads") appears to attempt to fix this problem, but it
only narrows the race window.
Fixes: 17f09d3f619a ("SUNRPC: Check if the xprt is connected before handling sysfs reads")
Fixes: a8482488a7d6 ("SUNRPC query transport's source port")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add the description of @server and @fhandle, and remove the excess
@inode in nfs4_proc_get_locations() kernel-doc comment to remove
warnings found by running scripts/kernel-doc, which is caused by
using 'make W=1'.
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'server'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'fhandle'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Excess function parameter 'inode'
description in 'nfs4_proc_get_locations'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If there are failures then we must not leave the non-NULL pointers with
the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries
free them, resulting in an Oops.
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().
Fixes: dd99e9f98fbf ("NFSv4: Initialise connection to the server in nfs4_alloc_client()")
Cc: stable@vger.kernel.org # 4.8.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Ever since Tomi extracted the core code in 2014 it's been defacto me
maintaining this, with help from others from dri-devel and sometimes
Linus (but those are mostly merge conflicts):
$ git shortlog -ns drivers/video/fbdev/core/ | head -n5
35 Daniel Vetter
23 Linus Torvalds
10 Hans de Goede
9 Dave Airlie
6 Peter Rosin
I think ideally we'd also record that the various firmware fb drivers
(efifb, vesafb, ...) are also maintained in drm-misc because for the
past few years the patches have either been to fix handover issues
with drm drivers, or caused handover issues with drm drivers. So any
other tree just doesn't make sense. But also, there's plenty of
outdated MAINTAINER entries for these with people and git trees that
haven't been active in years, so maybe let's just leave them alone.
And furthermore distros are now adopting simpledrm as the firmware fb
driver, so hopefully the need to care about the fbdev firmware drivers
will go down going forward.
Note that drm-misc is group maintained, I expect that to continue like
we've done before, so no new expectations that patches all go through
my hands. That would be silly. This also means I'm happy to put any
other volunteer's name in the M: line, but otherwise git log says I'm
the one who's stuck with this.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Fbdev development list <linux-fbdev@vger.kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: DRI Development <dri-devel@lists.freedesktop.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Claudio Suarez <cssk@net-c.es>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131210552.482606-2-daniel.vetter@ffwll.ch
|
|
Since __sbitmap_queue_get_shallow() was introduced in commit c05e66733788
("sbitmap: add sbitmap_get_shallow() operation"), it has not been used.
Delete __sbitmap_queue_get_shallow() and rename public
__sbitmap_queue_get_shallow() -> sbitmap_queue_get_shallow() as it is odd
to have public __foo but no foo at all.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1644322024-105340-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Only the last sbitmap_word can have different depth, and all the others
must have same depth of 1U << sb->shift, so not necessary to store it in
sbitmap_word, and it can be retrieved easily and efficiently by adding
one internal helper of __map_depth(sb, index).
Remove 'depth' field from sbitmap_word, then the annotation of
____cacheline_aligned_in_smp for 'word' isn't needed any more.
Not see performance effect when running high parallel IOPS test on
null_blk.
This way saves us one cacheline(usually 64 words) per each sbitmap_word.
Cc: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20220110072945.347535-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix this kernel test robot warning:
drivers/video/fbdev/core/fbcon.c: In function 'fbcon_init':
drivers/video/fbdev/core/fbcon.c:1028:6: warning: variable 'cap' set but not used [-Wunused-but-set-variable]
The cap variable is only used when CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION
is enabled. Drop the temporary variable and use info->flags instead.
Fixes: 87ab9f6b7417 ("Revert "fbcon: Disable accelerated scrolling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YgFB4xqI+As196FR@p100
|
|
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220128165956.27821-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the include path and modify parameters for fix error for bt binding test
Fixes: a708078eeb99 ("spi: Add Sunplus SP7021 schema")
Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
Link: https://lore.kernel.org/r/b8a94fbfcab68b1279b09b6297099310c209927b.1644198244.git.lhjeff911@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
Fixes: f333a331adfa ("spi/tegra114: add spi driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220128165238.25615-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reading from memory is 3x faster than bit-bang read operation. Also,
for tl-wr2543nd, the bit-bang read was sporadically returning random
data, possibly a HW defect, while fast-read works as expected.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20220129040453.8476-1-luizluca@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- Change irq request position to the back.
- Add temporary varilable and setting (as suggested by Mr. Andy Shevchenko)
Fixes: f62ca4e2a863 ("spi: Add spi driver for Sunplus SP7021")
Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com>
Link: https://lore.kernel.org/r/a94e3b123773fe303221d2bd2e4ce36ffa905a1c.1644198957.git.lhjeff911@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A zero value for spi->max_speed_hz or spidev->speed_hz does not make
sense and trying to set that can lead to divide by zero crashes in
a some of the drivers.
drivers/spi/spi-s3c64xx.c:874 s3c64xx_spi_setup() error: potential divide by zero bug '/ spi->max_speed_hz'.
drivers/spi/spi-fsl-dspi.c:613 hz_to_spi_baud() error: potential divide by zero bug '/ speed_hz'.
drivers/spi/spi-xlp.c:146 xlp_spi_setup() error: potential divide by zero bug '/ (spi->max_speed_hz)'.
drivers/spi/spi-orion.c:162 orion_spi_baudrate_set() error: potential divide by zero bug '/ speed'.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220125065202.GA8807@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit adds dt-binding documentation of spi bus for Mediatek MT8186 SoC
Platform.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220125012330.13449-4-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert Mediatek ARM SOC's SPI Master controller binding
to json-schema format.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220125012330.13449-3-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert Mediatek ARM SOC's SPI Slave controller binding
to json-schema format.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220125012330.13449-2-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TI's TPS62864/TPS6286/TPS62868/TPS62869 are high-frequency synchronous
step-down converters controlled via I2C. There are differences in the
electrical characteristics and packaging between the variants, but the
register interfaces are identical.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220204155241.576342-3-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for the TPS62864/TPS6286/TPS62868/TPS62869 voltage
regulators.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220204155241.576342-2-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The fsl_sai driver calculates the number of pins used and enables
multiple channels if necessary. This means the SAI expects data in
one FIFO per pin. The SDMA engine only services a single FIFO, so
multi pin support doesn't work at all.
This patch enables the software combine mode in chips that support
it. With this the SAI presents only a single FIFO to the outside
and distributes the data into the different FIFOs internally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220111081518.982437-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement snd_compress_ops. There are a lot of similarities with
PCM implementation.
For now we use sof_ipc_pcm_params to transfer compress parameters to SOF
firmware.
This will be changed in the future once we either add new compress
parameters to SOF or enhance existing sof_ipc_pcm_params structure
to support all native compress params.
Note that get_caps and get_codec_caps are missing and will be added
later. This is because we need to find a way to advertise DSP
capabilities depending on supported platforms.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220120143741.492634-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of passing a pointer to the stream_tag within the
struct sof_ipc_dma_trace_params_ext, pass the pointer to the containing
struct.
AMD needs to update buffer.phy_addr (and don't really use the stream_tag)
for the trace implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pass the snd_dma_buffer pointer as parameter to hda_dsp_trace_prepare()
function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The simple-mux driver requires gpiolib. Currently it selects GPIOLIB but
since the use of select can lead to issues with randconfig let's instead
depend on GPIOLIB, select is more idiomatically used for Kconfig symbols
that are not user selectable but GPIOLIB is user selectable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-7-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(),
which could lead to a NULL pointer dereference on failure of
kzalloc().
Fix this bug by adding a check of tmpbuf.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172253.203700-1-zhou1615@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The check done by regulator_late_cleanup() to detect whether a regulator
is on was inconsistent with the check done by _regulator_is_enabled().
While _regulator_is_enabled() takes the enable GPIO into account,
regulator_late_cleanup() was not doing that.
This resulted in a false positive, e.g. when a GPIO-controlled fixed
regulator was used, which was not enabled at boot time, e.g.
reg_disp_1v2: reg_disp_1v2 {
compatible = "regulator-fixed";
regulator-name = "display_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&tlmm 148 0>;
enable-active-high;
};
Such regulator doesn't have an is_enabled() operation. Nevertheless
it's state can be determined based on the enable GPIO. The check in
regulator_late_cleanup() wrongly assumed that the regulator is on and
tried to disable it.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Link: https://lore.kernel.org/r/20220208084645.8686-1-oliver.barta@aptiv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current rt5682_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.
This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.
Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220207153000.3452802-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current rt5668_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.
This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.
Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220207153000.3452802-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Marc Zyngier
Mark Brown
Jing Zhang
Lad Prabhakar
Oliver Upton
NeilBrown
Anna Schumaker
Yang Li
Dan Aloni
Trond Myklebust
Daniel Vetter
John Garry
Ming Lei
Helge Deller
Miaoqian Lin
Li-hao Kuo
Luiz Angelo Daros de Luca
Dan Carpenter
Leilk Liu
Vincent Whitchurch
Sascha Hauer
Daniel Baluta
Peter Ujfalusi
Zhou Qingyang
Oliver Barta
Kai Vehmanen