aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-12-20net: lan966x: add support for interrupts from analyzerHoratiu Vultur3-0/+266
This patch adds support for handling the interrupts generated by the analyzer. Currently, only the MAC table generates these interrupts. The MAC table will generate an interrupt whenever it learns or forgets an entry in the table. It is the SW responsibility figure out which entries were added/removed. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20dt-bindings: net: lan966x: Extend with the analyzer interruptHoratiu Vultur1-0/+2
Extend dt-bindings for lan966x with analyzer interrupt. This interrupt can be generated for example when the HW learn/forgets an entry in the MAC table. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20net: lan966x: Add registers that are used for switch and vlan functionalityHoratiu Vultur1-0/+129
This patch adds the registers that will be used to enable switchdev and vlan functionality in the HW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20Merge tag 'imx-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann10-7/+35
i.MX fixes for 5.16, round 3: - Fix imx6qdl-wandboard Ethernet support by adding 'qca,clk-out-frequency' property. - Fix scl-gpios property typo in LX2160A device tree. * tag 'imx-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: lx2160a: fix scl-gpios property name ARM: dts: imx6qdl-wandboard: Fix Ethernet support soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Link: https://lore.kernel.org/r/20211218052003.GA25102@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-20mac80211: fix locking in ieee80211_start_ap error pathJohannes Berg1-0/+3
We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it. Cc: stable@vger.kernel.org Fixes: 295b02c4be74 ("mac80211: Add FILS discovery support") Reported-and-tested-by: syzbot+11c342e5e30e9539cabd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211220090836.cee3d59a1915.I36bba9b79dc2ff4d57c3c7aa30dff9a003fe8c5c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20Merge branch 'mlxsw-devlink=health-reporter-extensions'David S. Miller2-30/+283
Ido Schimmel says: ==================== mlxsw: devlink health reporter extensions This patchset extends the devlink health reporter registered by mlxsw to report new health events and their related parameters. These are meant to aid in debugging hardware and firmware issues. Patches #1-#2 are preparations. Patch #3 adds the definitions of the new events and parameters. Patch #4 extends the health reporter to report the new events and parameters. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: core: Extend devlink health reporter with new events and parametersDanielle Ratson1-0/+131
Extend the devlink health reporter registered by mlxsw to report new health events and their related parameters. These are meant to aid in debugging of hardware / firmware issues. Beside the test event ('MLXSW_REG_MFDE_EVENT_ID_TEST') that is triggered following the devlink health 'test' sub-command, the new events are used to report the triggering of asserts in firmware code ('MLXSW_REG_MFDE_EVENT_ID_FW_ASSERT') and hardware issues ('MLXSW_REG_MFDE_EVENT_ID_FATAL_CAUSE'). Each event is accompanied with a severity parameter and per-event parameters that are meant to help root cause the detected issue. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: reg: Extend MFDE register with new events and parametersDanielle Ratson1-1/+104
Extend the Monitoring Firmware Debug (MFDE) register with new events and their related parameters. These events will be utilized by devlink-health in the next patch. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: core: Convert a series of if statements to switch caseDanielle Ratson1-18/+40
Convert a series of if statements that handle different events to a switch case statement. Encapsulate the per-event code in different functions to simplify the code. This is a preparation for subsequent patches that will add more events that need to be handled. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mlxsw: Fix naming convention of MFDE fieldsDanielle Ratson2-15/+12
Currently, the MFDE register field names are using the convention: reg_mfde_<NAME_OF_FIELD>, and do not consider the name of the MFDE event. Fix the field names so they fit the more accurate convention: reg_mfde_<NAME_OF_EVENT>_<NAME_OF_FIELD>. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20bnx2x: Invalidate fastpath HSI version for VFsManish Chopra1-2/+11
Commit 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") added validation for fastpath HSI versions for different client init which was not meant for SR-IOV VF clients, which resulted in firmware asserts when running VF clients with different fastpath HSI version. This patch along with the new firmware support in patch #1 fixes this behavior in order to not validate fastpath HSI version for the VFs. Fixes: 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20bnx2x: Utilize firmware 7.13.21.0Manish Chopra5-28/+69
This new firmware addresses few important issues and enhancements as mentioned below - - Support direct invalidation of FP HSI Ver per function ID, required for invalidating FP HSI Ver prior to each VF start, as there is no VF start - BRB hardware block parity error detection support for the driver - Fix the FCOE underrun flow - Fix PSOD during FCoE BFS over the NIC ports after preboot driver - Maintains backward compatibility This patch incorporates this new firmware 7.13.21.0 in bnx2x driver. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20x86/mce: Check regs before accessing itBorislav Petkov1-1/+4
Commit in Fixes accesses pt_regs before checking whether it is NULL or not. Make sure the NULL pointer check happens first. Fixes: 0a5b288e85bb ("x86/mce: Prevent severity computation from being instrumented") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20211217102029.GA29708@kili
2021-12-20HID: potential dereference of null pointerJiasheng Jiang1-0/+3
The return value of devm_kzalloc() needs to be checked. To avoid hdev->dev->driver_data to be null in case of the failure of alloc. Fixes: 14c9c014babe ("HID: add vivaldi HID driver") Cc: stable@vger.kernel.org Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211215083605.117638-1-jiasheng@iscas.ac.cn
2021-12-20HID: holtek: fix mouse probingBenjamin Tissoires1-0/+15
An overlook from the previous commit: we don't even parse or start the device, meaning that the device is not presented to user space. Fixes: 93020953d0fa ("HID: check for valid USB device for many HID drivers") Cc: stable@vger.kernel.org Link: https://bugs.archlinux.org/task/73048 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341 Link: https://lore.kernel.org/r/e4efbf13-bd8d-0370-629b-6c80c0044b15@leemhuis.info/ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2021-12-20mmc: meson-mx-sdhc: Drop unused MESON_SDHC_NUM_BUILTIN_CLKS macroMartin Blumenstingl1-2/+0
Remove MESON_SDHC_NUM_BUILTIN_CLKS because it is not used anywhere in the driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211219153442.463863-3-martin.blumenstingl@googlemail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-20Merge branch 'fixes' into nextUlf Hansson4-1/+32
2021-12-20cfg80211: Enable regulatory enforcement checks for drivers supporting mesh ifaceSriram R2-0/+3
Currently cfg80211 checks for invalid channels whenever there is a regulatory update and stops the active interfaces if it is operating on an unsupported channel in the new regulatory domain. This is done based on a regulatory flag REGULATORY_IGNORE_STALE_KICKOFF set during wiphy registration which disables this enforcement when unsupported interface modes are supported by driver. Add support to enable this enforcement when Mesh Point interface type is advertised by drivers. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1638409120-28997-1-git-send-email-quic_srirrama@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commandsMartin Blumenstingl1-0/+16
The vendor driver implements special handling for multi-block SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC register for these commands. In all other cases this bit is cleared. Here we omit SD_IO_RW_DIRECT since that command never has any data attached to it. This fixes SDIO wifi using the brcmfmac driver which reported the following error without this change on a Netxeon S82 board using a Meson8 (S802) SoC: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_sdiod_ramrw: membytes transfer failed brcmf_sdio_download_code_file: error -110 on writing 219557 membytes at 0x00000000 brcmf_sdio_download_firmware: dongle image file download failed And with this change: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d Fixes: e4bf1b0970ef96 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211219153442.463863-2-martin.blumenstingl@googlemail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-20mmc: core: Disable card detect during shutdownUlf Hansson3-1/+16
It's seems prone to problems by allowing card detect and its corresponding mmc_rescan() work to run, during platform shutdown. For example, we may end up turning off the power while initializing a card, which potentially could damage it. To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host class device and then turn of the card detect from there. Reported-by: Al Cooper <alcooperx@gmail.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211203141555.105351-1-ulf.hansson@linaro.org
2021-12-20rfkill: allow to get the software rfkill stateEmmanuel Grumbach2-0/+19
iwlwifi needs to be able to differentiate between the software rfkill state and the hardware rfkill state. The reason for this is that iwlwifi needs to notify any change in the software rfkill state even when it doesn't own the device (which means even when the hardware rfkill is asserted). In order to be able to know the software rfkill when the host does not own the device, iwlwifi needs to be able to ask the state of the software rfkill ignoring the state of the hardware rfkill. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20211219195124.125689-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: refactor cfg80211_get_ies_channel_number()Johannes Berg1-24/+22
Now that this is no longer part of the bigger function, we can get rid of the channel_num variable. Also change the function to use the struct element helpers, instead of open-coding the element handling. Link: https://lore.kernel.org/r/20211202130913.a0adf67a9319.I6db0340a34fff18d78e9cd512f4abf855da4e43a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20nl82011: clarify interface combinations wrt. channelsJohannes Berg1-1/+1
Thinking about MLD (Draft 802.11be) now, it's clear that we'll have new limitations where different stations (or links) must be on _different_ channels (or in different frequency ranges even.) Clarify that the current limit of multiple channels is a maximum and the same one is OK. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20211201110924.2816d91b6862.I2d997abd525574529f88e941d90aeb640dbb1abf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_allWei Wang1-1/+1
The fixed counter 3 is used for the Topdown metrics, which hasn't been enabled for KVM guests. Userspace accessing to it will fail as it's not included in get_fixed_pmc(). This breaks KVM selftests on ICX+ machines, which have this counter. To reproduce it on ICX+ machines, ./state_test reports: ==== Test Assertion Failure ==== lib/x86_64/processor.c:1078: r == nmsrs pid=4564 tid=4564 - Argument list too long 1 0x000000000040b1b9: vcpu_save_state at processor.c:1077 2 0x0000000000402478: main at state_test.c:209 (discriminator 6) 3 0x00007fbe21ed5f92: ?? ??:0 4 0x000000000040264d: _start at ??:? Unexpected result from KVM_GET_MSRS, r: 17 (failed MSR was 0x30c) With this patch, it works well. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Message-Id: <20211217124934.32893-1-wei.w.wang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-20nl80211: Add support to offload SA Query procedures for AP SME deviceVeerendranath Jakkam1-4/+12
Add a flag attribute to use in ap settings to indicate userspace supports offloading of SA Query procedures to driver. Also add AP SME device feature flag to advertise that the SA Query procedures offloaded to driver when userspace indicates support for offloading of SA Query procedures. Driver handles SA Query procedures in driver's SME it self and skip sending SA Query request or response frames to userspace when userspace indicates support for SA Query procedures offload. But if userspace doesn't advertise support for SA Query procedures offload driver shall not offload SA Query procedures handling. Also userspace with SA Query procedures offload capability shall skip SA Query specific validations when driver indicates support for handling SA Query procedures. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> Link: https://lore.kernel.org/r/1637911519-21306-2-git-send-email-vjakkam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20nl80211: Add support to set AP settings flags with single attributeVeerendranath Jakkam3-14/+25
In previous method each AP settings flag is represented by a top-level flag attribute and conversion to enum cfg80211_ap_settings_flags had to be done before sending them to driver. This commit is to make it easier to define new AP settings flags and sending them to driver. This commit also deprecate sending of %NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in %NL80211_CMD_START_AP. But to maintain backwards compatibility checks for %NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in %NL80211_CMD_START_AP when %NL80211_ATTR_AP_SETTINGS_FLAGS not present in %NL80211_CMD_START_AP. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> Link: https://lore.kernel.org/r/1637911519-21306-1-git-send-email-vjakkam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: add more HT/VHT/HE state loggingJohannes Berg1-12/+33
Add more logging in places that affect HT/VHT/HE state, so things get easier to debug. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211130131608.ac51d574458c.If197b45c5b31d2fbd254fa12c2d7c736f304d4ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: Use the HE operation IE to determine a 6GHz BSS channelAyala Beker2-18/+62
A non-collocated AP whose primary channel is not a PSC channel may transmit a duplicated beacon on the corresponding PSC channel in which it would indicate its true primary channel. Use this inforamtion contained in the HE operation IE to determine the primary channel of the AP. In case of invalid infomration ignore it and use the channel the frame was received on. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211202143322.71eb2176e54e.I130f678e4aa390973ab39d838bbfe7b2d54bff8e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standardLorenzo Bianconi11-100/+102
ETSI standard defines "Offchannel CAC" as: "Off-Channel CAC is performed by a number of non-continuous checks spread over a period in time. This period, which is required to determine the presence of radar signals, is defined as the Off-Channel CAC Time.. Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time 4 hours..". mac80211 implementation refers to a dedicated hw chain used for continuous radar monitoring. Rename offchannel_* references to background_* in order to avoid confusion with ETSI standard. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: Notify cfg80211 about association comebackIlan Peer1-0/+4
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.d76eac9e51ee.I986cffab95d51adfee6d84964711644392005113@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: Add support for notifying association comebackIlan Peer4-0/+74
Thought the underline driver MLME can handle association temporal rejection with comeback, it is still useful to notify this to user space, as user space might want to handle the temporal rejection differently. For example, in case the comeback time is too long, user space can deauthenticate immediately and try to associate with a different AP. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.2467809e8cb3.I45574185b582666bc78eef0c29a4c36b478e5382@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: introduce channel switch disconnect functionNathan Errera2-1/+25
Introduce a disconnect function that can be used when a channel switch error occurs. The channel switch can request to block the tx, and so, we need to make sure we do not send a deauth frame in this case. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cd2a615a0702.I9edb14785586344af17644b610ab5be109dcef00@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: Fix order of enum nl80211_band_iftype_attr documentationIlan Peer1-2/+1
And fix the comment. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.4ef43aff0c5d.I96dcb743bcd4f387ba4cfaa61987aeb642ad762b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20cfg80211: simplify cfg80211_chandef_valid()Johannes Berg1-30/+32
There are a lot of duplicate checks in this function to check the delta between the control channel and CF1. With the addition of 320 MHz, this will become even more. Simplify the code so that the common checks are done only once for multiple bandwidths. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.2d0240b07f11.I759e8e990f5386ba2b56ffb2488a8d4e16e22c1b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: Remove a couple of obsolete TODOIlan Peer2-12/+5
The HE capability IE is an extension IE so remove an irrelevant comments. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.550b95b5fca7.Ia31395e880172aefcc0a8c70ed060f84b94bdb83@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850Sam Protsenko1-1/+12
All Exynos850 GPIO blocks can use EXYNOS5420_PIN_DRV* definitions, except GPIO_HSI block. Add pin drive strength definitions for GPIO_HSI block correspondingly. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211217161549.24836-6-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-20dt-bindings: arm: samsung: Document E850-96 board bindingSam Protsenko1-0/+6
Add binding for the WinLink E850-96 board, which is based on Samsung Exynos850 SoC. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211217161549.24836-5-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-20dt-bindings: Add vendor prefix for WinLinkSam Protsenko1-0/+2
WinLink Co., Ltd is a hardware design and manufacturing company based in South Korea. Official web-site: [1]. [1] http://win-link.net/ Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211217161549.24836-4-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-20mac80211: fix FEC flag in radio tap headerP Praneesh1-1/+6
In mac80211, while building radiotap header IEEE80211_RADIOTAP_MCS_HAVE_FEC flag is missing when LDPC enabled from driver, hence LDPC is not updated properly in radiotap header. Fix that by adding HAVE_FEC flag while building radiotap header. Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Link: https://lore.kernel.org/r/1638294648-844-2-git-send-email-quic_ppranees@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20mac80211: use coarse boottime for airtime fairness codeFelix Fietkau1-5/+5
The time values used by the airtime fairness code only need to be accurate enough to cover station activity detection. Using ktime_get_coarse_boottime_ns instead of ktime_get_boottime_ns will drop the accuracy down to jiffies intervals, but at the same time saves a lot of CPU cycles in a hot path Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20211217114258.14619-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20s390/crash_dump: fix virtual vs physical address handlingHeiko Carstens2-12/+8
Signal processor STORE STATUS requires a physical address where register contents are supposed to be written to, however the kernel must read the data via the corresponding virtual address. Also the allocated save_area, where register contents are copied to, resides in virtual address space. Fix this by using proper __pa() conversion, or correct memblock_alloc() invocation. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-20s390/crypto: fix compile error for ChaCha20 moduleHeiko Carstens1-10/+10
The clgfi instruction used within the ChaCha20 assembly is only available for z9-109 and newer machines, and therefore this will generate a compile error if compiled e.g. with MARCH_Z900. Given that the assembler code will only be executed on machines with vector instructions, which became much later available than z9-109, use insn notation to generate the clgfi instruction, and avoid compile errors due to unknown instructions. Fixes: b087dfab4d39 ("s390/crypto: add SIMD implementation for ChaCha20") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-12-20mock a drm_plane in igt_check_plane_state to make the test more robustClaudio Suarez1-0/+4
igt_check_plane_state test crashes in drm_atomic_helper_check_plane_state when trying to de-reference drm_plane_state->plane->dev due to the lack of a struct drm_plane in the mock struct drm_plane_state. Since drm_plane_state always should contain a plane, the mock also needs a plane to be the test more robust and realistic. Add it. Signed-off-by: Claudio Suarez <cssk@net-c.es> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YaiWvQESctDMipjh@gineta.localdomain
2021-12-20Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312Johnny Chuang1-1/+45
The eKTH3900/eKTH5312 series do not support the firmware update rules of Remark ID. Exclude these two series from checking it when updating the firmware in touch controllers. Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com> Link: https://lore.kernel.org/r/1639619603-20616-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-20Merge 5.16-rc6 into tty-nextGreg Kroah-Hartman581-2194/+5403
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20Input: byd - fix typo in a commentXiang wangx1-1/+1
The double `the' in a comment is repeated, thus it should be removed. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20211216082735.11948-1-wangxiang@cdjrlc.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-20Merge 5.16-rc6 into usb-nextGreg Kroah-Hartman217-641/+1726
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-20iommu: Move flush queue data into iommu_dma_cookieRobin Murphy3-122/+95
Complete the move into iommu-dma by refactoring the flush queues themselves to belong to the DMA cookie rather than the IOVA domain. The refactoring may as well extend to some minor cosmetic aspects too, to help us stay one step ahead of the style police. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/24304722005bc6f144e2a1fdd865d1465722fc2e.1639753638.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-12-20iommu/iova: Move flush queue code to iommu-dmaRobin Murphy2-176/+176
Flush queues are specific to DMA ops, which are now handled exclusively by iommu-dma. As such, now that the historical artefacts from being shared directly with drivers have been cleaned up, move the flush queue code into iommu-dma itself to get it out of the way of other IOVA users. This is pure code movement with no functional change; refactoring to clean up the headers and definitions will follow. Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/1d9a1ee1392e96eaae5e6467181b3e83edfdfbad.1639753638.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-12-20iommu/iova: Consolidate flush queue codeRobin Murphy1-73/+58
Squash and simplify some of the freeing code, and move the init and free routines down into the rest of the flush queue code to obviate the forward declarations. Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/b0dd4565e6646b6489599d7a1eaa362c75f53c95.1639753638.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.