aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21iio: document pitch, yaw, roll modifiersAndrea Merello1-0/+9
Introduce ABI documentation for new modifiers used for reporting rotations expressed as euler angles (i.e. yaw, pitch, roll). It looks like we have some unit inconsistency along various IIO modifiers: it seems that incli is in deg, angl is in radians and rot isn't documented, but at least the adis16209 driver has rot in deg. Here we use deg (so angl is the only one using radians). Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-6-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: add modifers for pitch, yaw, rollAndrea Merello2-0/+6
Add modifiers for reporting rotations as euler angles (i.e. yaw, pitch and roll). Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-5-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: event_monitor: add linear acceleration modifiersAndrea Merello1-0/+3
Following the introduction of IIO linear acceleration modifiers, update the event_monitor tool accordingly. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-4-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: document linear acceleration modifiersAndrea Merello1-0/+9
Introduce ABI documentation for new IIO modifiers used for reporting "linear acceleration" measures. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-3-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: add modifiers for linear accelerationAndrea Merello2-1/+6
Add IIO_MOD_LINEAR_X, IIO_MOD_LINEAR_Y and IIO_MOD_LINEAR_Z modifiers to te IIO core, which is preparatory for adding the Bosch BNO055 IMU driver. Bosch BNO055 IMU can report raw accelerations (among x, y and z axis) as well as the so called "linear accelerations" (again, among x, y and z axis) which is basically the acceleration after subtracting gravity and for which those new modifiers are for. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-2-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: dps310: Reset chip after timeoutEddie James1-10/+64
The DPS310 chip has been observed to get "stuck" such that pressure and temperature measurements are never indicated as "ready" in the MEAS_CFG register. The only solution is to reset the device and try again. In order to avoid continual failures, use a boolean flag to only try the reset after timeout once if errors persist. Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310") Cc: <stable@vger.kernel.org> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: dps310: Refactor startup procedureEddie James1-89/+99
Move the startup procedure into a function, and correct a missing check on the return code for writing the PRS_CFG register. Cc: <stable@vger.kernel.org> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21dt-bindings: iio: adi,ad7923: add adi,range-double propertyNuno Sá1-0/+4
Document the new property to enable doubling the analog input range. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220912081223.173584-4-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: adc: ad7923: support extended rangeNuno Sá1-1/+6
By default the driver was always setting the RANGE bit which means that the analog input goes from 0 to VREF. However, we might want to have 0 to 2xVREF. This change adds a new Firmware property to allow for the extended range while keeping the default behavior if nothing is provided. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220912081223.173584-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: adc: ad7923: fix channel readings for some variantsNuno Sá1-1/+3
Some of the supported devices have 4 or 2 LSB trailing bits that should not be taken into account. Hence we need to shift these bits out which fits perfectly on the scan type shift property. This change fixes both raw and buffered reads. Fixes: f2f7a449707e ("iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924") Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220912081223.173584-2-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: adc: stm32-adc: add id registers supportOlivier Moysan2-3/+87
Add support of identification registers to STM32 ADC. By default the ADC hardware instance number is retrieved from the compatible configuration data. Get the available ADC number per ADC block, from hardware configuration register, when this register exists. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220915135452.1712453-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21dt-bindings: iio: imu: st_lsm6dsx: add lsm6dstx device bindingsLorenzo Bianconi1-0/+3
Add device bindings for lsm6dstx IMU sensor. Use lsm6dst as fallback device for lsm6dstx since it implements all the features currently supported by lsm6dstx. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/dadc2acf88b0b73feac9a8980ad9af1658297bc1.1663262890.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: imu: st_lsm6dsx: add support to LSM6DSTXLorenzo Bianconi6-3/+20
Add support to STM LSM6DSTX (acc + gyro) Mems sensor. The LSM6DSTX sensor can use LSM6DST as fallback device since it implements all the LSM6DSTX features currently implemented in st_lsm6dsx. Datasheet: https://www.st.com/resource/en/datasheet/lsm6dstx.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/573a232b0f320b2ec92c56fa24393cfb275183fb.1663262890.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21drivers: iio: adc: ltc2497: Rename the LTC2499 iio deviceCiprian Regus4-1/+13
Set the iio device's name based on the chip used for the LTC2499 only. The most common way for IIO clients to interact with a device is to address it based on it's name. By using the dev_name() function, the name will be set based on a i2c_client's kobj name, which has the format i2c_instance-i2c_address (1-0076 for example). This is not ideal, since it makes a requirement for userspace to have knowledge about the hardware connections of the device. The name field is set to NULL for the LTC2497 and LTC2496, so that the old name can kept as it is, since changing it will result in an ABI breakage. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> Link: https://lore.kernel.org/r/20220916140922.2506248-6-ciprian.regus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21drivers: iio: adc: ltc2497: LTC2499 supportCiprian Regus4-7/+70
The LTC2499 is a 16-channel (eight differential), 24-bit, ADC with Easy Drive technology and a 2-wire, I2C interface. Implement support for the LTC2499 ADC by extending the LTC2497 driver. A new chip_info struct is added to differentiate between chip types and resolutions when reading data from the device. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> Link: https://lore.kernel.org/r/20220916140922.2506248-5-ciprian.regus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21Add MAINTAINERS entries for LTC2497 and LTC2496Ciprian Regus1-0/+2
Update the MAINTAINERS file to include the path for the LTC2497 and LTC2496 devicetree bindings documentation. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> Link: https://lore.kernel.org/r/20220916140922.2506248-4-ciprian.regus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21dt-bindings: iio: adc: Add docs for LTC2499Ciprian Regus1-2/+6
Update the bindings documentation for ltc2497 to include the ltc2499. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220916140922.2506248-3-ciprian.regus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21MAINTAINERS: Remove duplicate matching entryCiprian Regus1-1/+0
Remove the specific entry for ad5758, since Documentation/devicetree/bindings/iio/*/adi,* already matches the path. Signed-off-by: Ciprian Regus <ciprian.regus@analog.com> Link: https://lore.kernel.org/r/20220916140922.2506248-2-ciprian.regus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: ltc2497: Fix reading conversion resultsUwe Kleine-König1-0/+13
After the result of the previous conversion is read the chip automatically starts a new conversion and doesn't accept new i2c transfers until this conversion is completed which makes the function return failure. So add an early return iff the programming of the new address isn't needed. Note this will not fix the problem in general, but all cases that are currently used. Once this changes we get the failure back, but this can be addressed when the need arises. Fixes: 69548b7c2c4f ("iio: adc: ltc2497: split protocol independent part in a separate module ") Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Denys Zagorui <dzagorui@cisco.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220815091647.1523532-1-dzagorui@cisco.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: Add more tunable config parameters for BMP380Angel Iglesias2-27/+238
Allows sampling frequency and IIR filter coefficients configuration using sysfs ABI. The IIR filter coefficient is configurable using the sysfs attribute "filter_low_pass_3db_frequency". Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/876f8a2277f71672488e99aa02aae4239d530f51.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21dt-bindings: iio: pressure: bmp085: Add BMP380 compatible stringAngel Iglesias1-1/+3
Add bosch,bmp380 compatible string for the new family of sensors. This family includes the BMP380, BMP384 and BMP388. The register map in this family changes substantially and introduces new features but core concepts and operations carryover from the previous iterations Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/67224da4ae308bb752fc8fdecc54345cedab6c21.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: Add support for BMP380 sensor familyAngel Iglesias6-3/+555
Adds compatibility with the new generation of this sensor, the BMP380. Includes basic sensor initialization to do pressure and temp measurements and allows tuning oversampling settings for each channel. The compensation algorithms are adapted from the device datasheet and the repository https://github.com/BoschSensortec/BMP3-Sensor-API. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/f1da2a2f1bc5bb083f318335c23b4f3d9bb8e536.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: reorder i2c device tables declarationsAngel Iglesias1-5/+5
Change device tables declarations to forward order like in SPI codepath. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/a3969b60e428b9bd29ea1ebc6dd69aa5bbe59da0.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: Fix alignment for DMA safetyAngel Iglesias2-58/+75
Adds DMA-safe buffers to driver data struct to store raw data from sensors The multiple buffers used thorough the driver share the same memory allocated as part of the device data instance. The union containing the buffers is aligned to allow safe usage with DMA operations, such as regmap bulk read calls. Updated measurement and calibration reading functions to use the safe DMA buffers. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/7919793f7f63224d5ce413c66d648029683c17ac.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: simplify driver initialization logicAngel Iglesias1-43/+83
Simplified common initialization logic of different sensor types unifying calibration and initial configuration recovery. Default config param values of each sensor type are stored inside chip_info structure and used to initialize sensor data struct instance. The helper functions for read each sensor type calibration are converted to a callback available on the chip_info struct. Separated bme280 specific calibration code from bmp280 function. Dropped the additional chip_id argument in bmp280 code as is not longer required. Now both bmp280/bme280 calibration function use same signature as bmp180. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/584c90f309e4f24bf2e4aa2b15c8577d288f978d.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: Simplify bmp280 calibration data readingAngel Iglesias2-33/+24
On bmp280 and bme280, the temperature and pressure calibration parameters are available on a contiguous memory region. Considering this arrangement, simplified the calibration reading function by using only one buffer to read in batch temperature and pressure registers. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/96d81282c95006d857f4d836d2ff3ee0740a85a0.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: use FIELD_GET, FIELD_PREP and GENMASKAngel Iglesias2-44/+55
Cleaned and simplified register values construction and extraction converting to use FIELD_PREP and FIELD_GET macros. Replaced hardcoded bit masks with GENMASK macro. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/3cbe56f29c2a46bc5dc23c5b72e1b43c9207f44d.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: reorder local variables following reverse xmas treeAngel Iglesias1-32/+33
Reordered definitions of local variables following the reverse christmas tree convention. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/363a106afbfe30ce590b80b1494c8b3322870f8a.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: dac: ad5593r: add check for i2c functionalityNuno Sá1-0/+4
Make sure that the needed i2c functionality is supported during probe. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20220913073413.140475-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: dac: ad5593r: Fix i2c read protocol requirementsMichael Hennerich1-19/+27
For reliable operation across the full range of supported interface rates, the AD5593R needs a STOP condition between address write, and data read (like show in the datasheet Figure 40) so in turn i2c_smbus_read_word_swapped cannot be used. While at it, a simple helper was added to make the code simpler. Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220913073413.140475-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: temperature: mlx90614 Refactoring available filter attributesCrt Mori1-11/+30
Change/refactor to the new way of defining available attribute values. Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20220906112632.244453-1-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21drivers: iio: accel: adxl312 and adxl314 supportGeorge Mois4-93/+281
ADXL312 and ADXL314 are small, thin, low power, 3-axis accelerometers with high resolution (13-bit) measurement up to +/-12 g and +/- 200 g respectively. Implement support for ADXL312 and ADXL314 by extending the ADXL313 driver. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL312.pdf Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL314.pdf Signed-off-by: George Mois <george.mois@analog.com> Link: https://lore.kernel.org/r/20220905132018.364900-2-george.mois@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21dt-bindings: iio: accel: adxl313: Add compatibles for adxl312 and adxl314George Mois1-3/+7
Extend the adi,adxl313.yaml file with information regrding the ADXL312 and ADXL314 devices. Signed-off-by: George Mois <george.mois@analog.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220905132018.364900-1-george.mois@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: bmp280: fix datasheet linksAngel Iglesias1-3/+9
Updated links for BMP280 and BME280 datasheets on Bosch website. Datasheet of BMP180 is no longer available on the manufacturer's website, changed the link to a copy hosted by a third party. Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/20220912222645.377874-1-ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: st_pressure: Add support for LPS22DFMartyn Welch4-0/+82
Add support for ST LPS22DF pressure sensor. Datasheet: https://www.st.com/resource/en/datasheet/lps22df.pdf Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Link: https://lore.kernel.org/r/20220909161611.780720-2-martyn.welch@collabora.co.uk Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21dt-bindings: iio: st,st-sensors add LPS22DF.Martyn Welch1-0/+2
Add support for the ST LPS22DF, an I2C/SPI pressure sensor. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220909161611.780720-1-martyn.welch@collabora.co.uk Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21bpf: simplify code in btf_parse_hdrWilliam Dean1-6/+1
It could directly return 'btf_check_sec_info' to simplify code. Signed-off-by: William Dean <williamsukatube@163.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220917084248.3649-1-williamsukatube@163.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2022-09-21rpmsg: char: Avoid double destroy of default endpointShengjiu Wang1-1/+3
The rpmsg_dev_remove() in rpmsg_core is the place for releasing this default endpoint. So need to avoid destroying the default endpoint in rpmsg_chrdev_eptdev_destroy(), this should be the same as rpmsg_eptdev_release(). Otherwise there will be double destroy issue that ept->refcount report warning: refcount_t: underflow; use-after-free. Call trace: refcount_warn_saturate+0xf8/0x150 virtio_rpmsg_destroy_ept+0xd4/0xec rpmsg_dev_remove+0x60/0x70 The issue can be reproduced by stopping remoteproc before closing the /dev/rpmsgX. Fixes: bea9b79c2d10 ("rpmsg: char: Add possibility to use default endpoint of the rpmsg device") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1663725523-6514-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-09-21remoteproc: virtio: Create platform device for the remoteproc_virtioArnaud Pouliquen4-81/+82
Define a platform driver to manage the remoteproc virtio device as a platform devices. The platform device allows to pass rproc_vdev_data platform data to specify properties that are stored in the rproc_vdev structure. Such approach will allow to preserve legacy remoteproc virtio device creation but also to probe the device using device tree mechanism. remoteproc_virtio.c update: - Add rproc_virtio_driver platform driver. The probe ops replaces the rproc_rvdev_add_device function. - All reference to the rvdev->dev has been updated to rvdev-pdev->dev. - rproc_rvdev_release is removed as associated to the rvdev device. - The use of rvdev->kref counter is replaced by get/put_device on the remoteproc virtio platform device. - The vdev device no longer increments rproc device counter. increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove function in charge of the vrings allocation/free. remoteproc_core.c update: Migrate from the rvdev device to the rvdev platform device. From this patch, when a vdev resource is found in the resource table the remoteproc core register a platform device. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20220921135044.917140-5-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-09-21Merge tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linuxLinus Torvalds6-12/+14
Pull UML fixes from Richard Weinberger: - Various fixes for build warnings - Fix default kernel command line * tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: arch: um: Mark the stack non-executable to fix a binutils warning um: Prevent KASAN splats in dump_stack() um: fix default console kernel parameter um: Cleanup compiler warning in arch/x86/um/tls_32.c um: Cleanup syscall_handler_t cast in syscalls_32.h
2022-09-21remoteproc: Move rproc_vdev management to remoteproc_virtio.cArnaud Pouliquen3-160/+161
Move functions related to the management of the rproc_vdev structure in the remoteproc_virtio.c. The aim is to decorrelate as possible the virtio management from the core part. Due to the strong correlation between the vrings and the resource table the rproc_alloc/parse/free_vring functions are kept in the remoteproc core. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20220921135044.917140-4-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-09-21remoteproc: core: Introduce rproc_add_rvdev functionArnaud Pouliquen1-2/+14
The rproc structure contains a list of registered rproc_vdev structure. To be able to move the management of the rproc_vdev structure in remoteproc_virtio.c (i.e rproc_rvdev_add_device function), introduce the rproc_add_rvdev and rproc_remove_rvdev functions. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20220921135044.917140-3-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-09-21remoteproc: core: Introduce rproc_rvdev_add_device functionArnaud Pouliquen2-64/+98
In preparation of the migration of the management of rvdev in remoteproc_virtio.c, this patch spins off a new function to manage the remoteproc virtio device creation. The rproc_rvdev_add_device will be moved to remoteproc_virtio.c. The rproc_vdev_data structure is introduced to provide information for the rvdev creation. This structure allows to manage the rvdev and vrings allocation in the rproc_rvdev_add_device function. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20220921135044.917140-2-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-09-21Merge tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-8/+9
Pull MIPS fixes from Thomas Bogendoerfer: - fix missing export for Lantiq watchdog driver - fix ethernet phy interface setup for Loongson32 * tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Loongson32: Fix PHY-mode being left unspecified MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
2022-09-21io_uring/net: use io_sr_msg for sendzcPavel Begunkov1-13/+5
Reuse struct io_sr_msg for zerocopy sends, which is handy. There is only one zerocopy specific field, namely .notif, and we have enough space for it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/408c5b1b2d8869e1a12da5f5a78ed72cac112149.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21io_uring/net: refactor io_sr_msg typesPavel Begunkov1-7/+7
In preparation for using struct io_sr_msg for zerocopy sends, clean up types. First, flags can be u16 as it's provided by the userspace in u16 ioprio, as well as addr_len. This saves us 4 bytes. Also use unsigned for size and done_io, both are as well limited to u32. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/42c2639d6385b8b2181342d2af3a42d3b1c5bcd2.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21io_uring/net: add non-bvec sg chunking callbackPavel Begunkov1-6/+11
Add a sg_from_iter() for when we initiate non-bvec zerocopy sends, which helps us to remove some extra steps from io_sg_from_iter(). The only thing the new function has to do before giving control away to __zerocopy_sg_from_iter() is to check if the skb has managed frags and downgrade them if so. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/cda3dea0d36f7931f63a70f350130f085ac3f3dd.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21io_uring/net: io_async_msghdr caches for sendzcPavel Begunkov1-5/+4
We already keep io_async_msghdr caches for normal send/recv requests, use them also for zerocopy send. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/42fa615b6e0be25f47a685c35d7b5e4f1b03d348.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21io_uring/net: use async caches for async prepPavel Begunkov2-3/+15
send/recv have async_data caches but there are only used from within issue handlers. Extend their use also to ->prep_async, should be handy with links and IOSQE_ASYNC. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b9a2264b807582a97ed606c5bfcdc2399384e8a5.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-21io_uring/net: reshuffle error handlingPavel Begunkov1-8/+8
We should prioritise send/recv retry cases over failures, they're more important. Shuffle -ERESTARTSYS after we handled retries. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d9059691b30d0963b7269fa4a0c81ee7720555e6.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.