| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This change adds the device-tree entries for the Analog Devices ADP5585 and
ADP5589 devices to the trivial devices list.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201127111420.96500-4-alexandru.ardelean@analog.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Document the PCIe DT bindings for SM8250 SoC. The PCIe IP is similar to
the one used on SDM845, hence just add the compatible along with the
optional "atu" register region.
Link: https://lore.kernel.org/r/20201208121402.178011-2-mani@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Arm SMMU updates for 5.11, including support for the SMMU integrated
into the Adreno GPU as well as workarounds for the broken firmware
implementation in the DB845c SoC from Qualcomm.
* for-next/iommu/arm-smmu:
iommu: arm-smmu-impl: Add a space before open parenthesis
iommu: arm-smmu-impl: Use table to list QCOM implementations
iommu/arm-smmu: Move non-strict mode to use io_pgtable_domain_attr
iommu/arm-smmu: Add support for pagetable config domain attribute
iommu/io-pgtable-arm: Add support to use system cache
iommu/io-pgtable: Add a domain attribute for pagetable configuration
dt-bindings: arm-smmu: Add compatible string for Adreno GPU SMMU
iommu/arm-smmu: Add a way for implementations to influence SCTLR
iommu/arm-smmu-qcom: Add implementation for the adreno GPU SMMU
iommu/arm-smmu-v3: Assign boolean values to a bool variable
iommu/arm-smmu: Use new devm_krealloc()
iommu/arm-smmu-qcom: Implement S2CR quirk
iommu/arm-smmu-qcom: Read back stream mappings
iommu/arm-smmu: Allow implementation specific write_s2cr
|
|
Add new compatible strings to the DT binding documents to support SiFive
FU740-C000.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Link: https://lore.kernel.org/r/1607403341-57214-3-git-send-email-yash.shah@sifive.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Imx-hdmi is a new added machine driver for supporting hdmi devices
on i.MX platforms. There is HDMI IP or external HDMI modules connect
with SAI or AUD2HTX interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1607251319-5821-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 90a09178f309 ("dt-bindings: Add documentation for GV11B GPU")
added the GV11B GPU device-tree bindings information but incorrectly
added an additional 0 to the size of the addresses in the example.
Fixes: 90a09178f309 ("dt-bindings: Add documentation for GV11B GPU")
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20201124121842.1037035-1-jonathanh@nvidia.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Adds Foxconn Industrial Internet, who have submitted a BMC device tree.
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201119073230.123888-1-joel@jms.id.au
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Add binding for DisplayPort connector. A few notes:
* Similar to hdmi-connector, it has hpd-gpios as an optional property,
as the HPD could also be handled by, e.g., the DP bridge.
* dp-pwr-supply, which provides 3.3V on DP_PWR pin, is optional, as it
is not strictly required: standard DP cables do not even have the pin
connected.
* Connector type. Full size and mini connectors are identical except for
the connector size and form, so I believe there is no functional need
for this property. But similar to 'label' property, it might be used
to present information about the connector to the userspace.
* No eDP. There's really no "eDP connector", as it's always a custom
made connection between the DP and the DP panel, although the eDP spec
does offer a few suggested pin setups. So possibly there is no need for
edp-connector binding, but even if there is, I don't want to guess what
it could look like, and could it be part of the dp-connector binding.
* No DP++. I'm not familiar with DP++. DP++ might need an i2c bus added
to the bindings.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130112919.241054-2-tomi.valkeinen@ti.com
|
|
This panel from Shenzhen Yashi Changhua Intelligent Technology Co
uses the same driver IC but a different LCD.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/eb2a0e50cbb8cfebc27d259607e543fedb8c6b27.1605688147.git.agx@sigxcpu.org
|
|
Add prefix for Shenzhen Yashi Changhua Intelligent Technology Co., Ltd.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/efa9b6da947e0cd87ec47c1a211690045304989b.1605688147.git.agx@sigxcpu.org
|
|
The commit adds rt2880 compatible node in binding document.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201208075523.7060-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add compatible for SDX55 RPMHCC and DT include.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201126072844.35370-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device tree bindings for global clock controller on SDX55 SoCs.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201126072844.35370-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201108185113.31377-7-michael@walle.cc
[sboyd@kernel.org: DT bindings aren't drivers]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This patch removes a loose "i" character is present on the current
documentation.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Link: https://lore.kernel.org/r/89719d8d40048e9b7baa0cd984b5bb108d056de4.1605741519.git.gustavo.pimentel@synopsys.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
If DT_SCHEMA_FILES is specified and contains more than one file paths,
'make dtbs_check' fails with the following message:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml path/to/schema2.yaml"
SCHEMA Documentation/devicetree/bindings/processed-schema.json
Documentation/devicetree/bindings/Makefile:77: recipe for target 'Documentation/devicetree/bindings/processed-schema.json' failed
make[1]: *** [Documentation/devicetree/bindings/processed-schema.json] Error 255
make[1]: *** Deleting file 'Documentation/devicetree/bindings/processed-schema.json'
Makefile:1364: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
The error code 255 is returned by 'dt-mk-schema' when invoked as
'dt-mk-schema -j -u @<tmp-file>', where '<tmp-file>' is a temporary
file that is generated to contain a list of SPACE delimited schema
file paths, as indicated via DT_SCHEMA_FILES.
However, it seems the file format has been recently changed in
'dt-mk-schema', which now expects each schema path to be provided on
a separate line:
$ dt-mk-schema --version
2020.12.dev4+g6de1c45
Therefore, let's change '<tmp-file>' content format from
path/to/schema1.yaml path/to/schema2.yaml ... path/to/schemaN.yaml
to
path/to/schema1.yaml
path/to/schema2.yaml
...
path/to/schemaN.yaml
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/2519b8bde507ca6ccea9765ea197adaaa69a66d5.1605712328.git.cristian.ciocaltea@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove redundant white-spaces, no functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201117201752.129766-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Fix a few new indentation warnings found with yamllint (now integrated
into the checks).
Cc: Ricardo Ribalda <ribalda@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # For adv7604
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The GE2D is a 2D accelerator with various features like configurable blitter
with alpha blending, frame rotation, scaling, format conversion and colorspace
conversion.
This adds the bindings for the GE2D version found in the AXG SoCs Family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This add the bindings for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204081949.38418-2-narmstrong@baylibre.com
|
|
This reverts commit f61eb7bc9256aeb173d2d730f59cdd569d261c52.
While aligning with the OF graph schema will be done for the media DT
bindings, this patch got merged a little too hastily. Revert it for now.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to
KEY_EPG to provide a more useful remote.
[0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add Aspeed AST2400 and AST2600 binding for the Aspeed EDAC driver.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/20201207090013.14145-1-troy_lee@aspeedtech.com
|
|
DSI1 on BCM2711 doesn't require the DMA workaround that is used
on BCM2835/6/7, therefore it needs a new compatible string.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-7-maxime@cerno.tech
|
|
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the fixes in here, and this resolves a merge issue with
drivers/misc/habanalabs/common/memory.c.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This moves the MCDE bindings over to using the YAML schema
to describe the ST-Ericsson MCDE display controller,
making use of the generic DSI controller schema.
In the process we correct an error in the old text bindings:
the clocks for the SDI host controllers were specified as
part of the main MCDE component while they should be
specified in the DSI host controller subnodes. This was
a leftover from an earlier iteration of the first patch
series adding the MCDE.
We also add the "port" node, we will use this when adding
LCD panels using the direct parallel interface DPI instead
of DSI.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201115185145.566772-1-linus.walleij@linaro.org
|
|
Add device tree binding Documentation details for Qualcomm SM8250
LPASS(Low Power Audio Sub System) LPI(Low Power Island) pinctrl driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201202163443.26499-2-srinivas.kandagatla@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add a binding description for the MStar/SigmaStar GPIO controller
found in the MSC313 and later ARMv7 SoCs.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201129110803.2461700-3-daniel@0x0f.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Document opp-supported-hw property, which is not strictly necessary to
have on Tegra20, but it's very convenient to have because all other SoC
core devices will use hardware versioning, and thus, it's good to maintain
the consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201203192439.16177-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Update the Broadcom SATA PHY Device Tree binding to a YAML format.
Suggested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201204193532.1934108-1-f.fainelli@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update the rockchip-emmc-phy.txt and add the u32 property
'output-tapdelay-select'. This allow to set the otapdlysec register.
Tested with our customized rk3399 board to tune eMMC.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Link: https://lore.kernel.org/r/20201202082507.3536-3-chris.ruehl@gtsys.com.hk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move Ingenic USB PHY bindings from Documentation/devicetree/bindings/usb
to Documentation/devicetree/bindings/phy, and add bindings for JZ4775 SoC
and X2000 SoC.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201116141906.11758-3-zhouyanjie@wanyeetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update the documentation and add the bool property
enable-strobe-pulldown used to enable the internal pull-down for the
strobe line.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Link: https://lore.kernel.org/r/20201129054416.3980-3-chris.ruehl@gtsys.com.hk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
wl1251: remove trailing semicolon in macro definition
airo: remove trailing semicolon in macro definition
wilc1000: added queue support for WMM
wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
wilc1000: added 'ndo_set_mac_address' callback support
brcmfmac: expose firmware config files through modinfo
wlcore: Switch to using the new API kobj_to_dev()
rtw88: coex: add feature to enhance HID coexistence performance
rtw88: coex: upgrade coexistence A2DP mechanism
rtw88: coex: add action for coexistence in hardware initial
rtw88: coex: add function to avoid cck lock
rtw88: coex: change the coexistence mechanism for WLAN connected
rtw88: coex: change the coexistence mechanism for HID
rtw88: coex: update AFH information while in free-run mode
rtw88: coex: update the mechanism for A2DP + PAN
rtw88: coex: add debug message
rtw88: coex: run coexistence when WLAN entering/leaving LPS
Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
...
====================
Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PM8350 and PM8350C compatibles for these PMICs found in some
Qualcomm platforms.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201203071244.2652297-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Xilinx ZynqMP has 3 mio banks and all of them are valid. That's why also
list the first one which is missing. Property is enumeration not range.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The compatible string "fsl,imx8qm-usdhc" was wrongly dropped in commit
80fd350b9590 ("dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible
matching"), let's add it back.
Cc: Haibo Chen <haibo.chen@nxp.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 80fd350b9590 ("dt-bindings: mmc: fsl-imx-esdhc: Fix i.MX 8 compatible matching")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201126105900.26658-2-aisheng.dong@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201126092151.1082697-1-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Conflicts:
drivers/net/ethernet/ibm/ibmvnic.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/501ff8187d2df584ec978c7e7ec5c445c3d0741c.1606642528.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The trigger child nodes are not necessary anymore as they are defined
directly by the driver, depending on the compatible string.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lore.kernel.org/r/20201128222818.1910764-7-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are a few things we would do differently in an ADC binding if we
were starting from scratch but we are stuck with what we have (which
made sense back when this was written!)
We may be able to tighten up some elements of this binding in the future
by careful checking of what values properties can actually take.
Note the unusual sign off chain is representative of the path this patch
took.
Jonathan wrote the patch, which was then included in a series by
Alexandre and ultimately applied by Jonathan.
[Alexandre Belloni: add sama5d3, remove atmel,adc-res and atmel,adc-res-names]
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-5-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove atmel,adc-res and atmel,adc-res-names as they are not necessary and
are handled by the driver. Also add sama5d3 to the list of possible chips.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lore.kernel.org/r/20201128222818.1910764-4-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There were a few parts of the example that did not conform to the
binding description and would not have worked with the Linux driver
as a result. Fixed them whilst doing this conversion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20201031181242.742301-11-jic23@kernel.org
|
|
Simple conversion using the new iio-consumers.yaml binding in the
dt-schema.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201031181242.742301-10-jic23@kernel.org
|
|
Simple binding so straight forward conversion, though did require
adding a separate binding document for the max1027 to reflect
its abilities to provide channels to consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201031181242.742301-9-jic23@kernel.org
|
Alexandru Ardelean
Manivannan Sadhasivam
Will Deacon
Yash Shah
Shengjiu Wang
Jon Hunter
Joel Stanley
Tomi Valkeinen
Guido Günther
Sergio Paracuellos
Vinod Koul
Michael Walle
Gustavo Pimentel
Cristian Ciocaltea
Krzysztof Kozlowski
Rob Herring
Neil Armstrong
Sakari Ailus
Jonas Karlman
Troy Lee
Dave Stevenson
Greg Kroah-Hartman
Wolfram Sang
Linus Walleij
Srinivas Kandagatla
Daniel Palmer
Dmitry Osipenko
Florian Fainelli
Chris Ruehl
周琰杰 (Zhou Yanjie)
Mark Brown
Jakub Kicinski
Michal Simek
Dong Aisheng
Lorenzo Bianconi
Alexandre Belloni
Jonathan Cameron