path: root/Documentation/devicetree/bindings (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-0/+7
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-08Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+5
Pull ARM SoC fixes from Olof Johansson: "We've been accruing these for a couple of weeks, so the batch is a bit bigger than usual. Largest delta is due to a led-bl driver that is added -- there was a miscommunication before the merge window and the driver didn't make it in. Due to this, the platforms needing it regressed. At this point, it seemed easier to add the new driver than unwind the changes. Besides that, there are a handful of various fixes: - AMD tee memory leak fix - A handful of fixlets for i.MX SCU communication - A few maintainers woke up and realized DEBUG_FS had been missing for a while, so a few updates of that. ... and the usual collection of smaller fixes to various platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits) ARM: socfpga_defconfig: Add back DEBUG_FS arm64: dts: socfpga: agilex: Fix gmac compatible ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED tee: amdtee: fix memory leak in amdtee_open_session() ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc ...
2020-03-06dt-bindings: net: FMan erratum A050385Madalin Bucur1-0/+7
FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06Merge tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds57-154/+161
Pull devicetree fixes from Rob Herring: "Another batch of DT fixes. I think this should be the last of it, but sending pull requests seems to cause people to send more fixes. Summary: - Fixes for warnings introduced by hierarchical PSCI binding changes - Fixes for broken doc references due to DT schema conversions - Several grammar and typo fixes - Fix a bunch of dtc warnings in examples" * tag 'devicetree-fixes-for-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI states dt-bindings: power: Extend nodename pattern for power-domain providers MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entry dt-bindings: bus: Drop empty compatible string in example dt-bindings: power: Convert domain-idle-states bindings to json-schema dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCI dt-bindings: arm: Correct links to idle states definitions dt-bindings: mfd: Fix typo in file name of twl-familly.txt dt-bindings: mfd: tps65910: Improve grammar dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad") dt-bindings: arm: fsl: fix APF6Dev compatible dt-bindings: Fix dtc warnings in examples docs: dt: fix several broken doc references docs: dt: fix several broken references due to renames MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX
2020-03-06Merge tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds1-1/+1
Pull regulator fixes from Mark Brown: "A couple of small fixes, one for a minor issue in the stm32-vrefbuf driver and a documentation fix in the Qualcomm code" * tag 'regulator-fix-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling regulator: qcom_spmi: Fix docs for PM8004
2020-03-06dt-bindings: arm: Fixup the DT bindings for hierarchical PSCI statesUlf Hansson1-15/+13
The hierarchical topology with power-domain should be described through child nodes, rather than as currently described in the PSCI root node. Fix this by adding a patternProperties with a corresponding reference to the power-domain DT binding. Additionally, update the example to conform to the new pattern, but also to the adjusted domain-idle-state DT binding. Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [robh: Add missing allOf, tweak power-domain node name] Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-06dt-bindings: power: Extend nodename pattern for power-domain providersUlf Hansson1-1/+1
The existing binding requires the nodename to have a '@', which is a bit limiting for the wider use case. Therefore, let's extend the pattern to allow either '@' or '-'. Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [robh: drop example change] Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-04dt-bindings: bus: Drop empty compatible string in exampleRob Herring1-1/+0
In preparation to add generic checks of compatible strings, drop the compatible as '...' is not a valid compatible string. Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-04dt-bindings: power: Convert domain-idle-states bindings to json-schemaUlf Hansson5-47/+76
While converting to the json-schema, let's also take the opportunity to further specify/clarify some more details about the DT binding. For example, let's define the label where to put the states nodes, set a pattern for nodename of the state nodes and finally add an example. Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [robh: drop type refs from standard unit properties] Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-04dt-bindings: arm: Fix cpu compatibles in the hierarchical example for PSCIUlf Hansson1-2/+2
Fixes: a3f048b5424e ("dt: psci: Update DT bindings to support hierarchical PSCI states") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-04dt-bindings: arm: Correct links to idle states definitionsUlf Hansson1-1/+1
The arm,idle-state DT bindings recently got converted to the json-schema, but some links are still pointing to the old, non-existing, txt file. Let's update the links to fix this. Fixes: baac82fe06db ("dt-bindings: arm: Convert arm,idle-state binding to DT schema") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03Merge tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixesOlof Johansson5-23/+46
arm64: dts: agilex: fix gmac compatible - The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10" * tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits) arm64: dts: socfpga: agilex: Fix gmac compatible Linux 5.6-rc4 KVM: VMX: check descriptor table exits on instruction emulation ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() macintosh: therm_windtunnel: fix regression when instantiating devices jbd2: fix data races at struct journal_head kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter MAINTAINERS: Correct Cadence PCI driver path io_uring: fix 32-bit compatability with sendmsg/recvmsg net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() ... Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-03dt-bindings: mfd: Fix typo in file name of twl-familly.txtJonathan Neuschäfer2-1/+1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03dt-bindings: mfd: tps65910: Improve grammarJonathan Neuschäfer1-2/+2
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-03dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad")Jonathan Neuschäfer1-1/+1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-02dt-bindings: arm: fsl: fix APF6Dev compatibleSébastien Szymanski1-1/+1
APF6 Dev compatible is armadeus,imx6dl-apf6dev and not armadeus,imx6dl-apf6dldev. Fixes: 3d735471d066 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-28dt-bindings: Fix dtc warnings in examplesRob Herring22-58/+39
Fix all the warnings in the DT binding schema examples when built with 'W=1'. This is in preparation to make that the default for examples. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-27Merge tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixesOlof Johansson1-1/+2
Fix AMDTEE memory leak in amdtee_open_session() * tag 'tee-amdtee-fix-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: (344 commits) tee: amdtee: fix memory leak in amdtee_open_session() Linux 5.6-rc2 ext4: improve explanation of a mount failure caused by a misconfigured kernel Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member IB/mlx5: Use div64_u64 for num_var_hw_entries calculation nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info nvme/pci: move cqe check after device shutdown nvme: prevent warning triggered by nvme_stop_keep_alive nvme/tcp: fix bug on double requeue when send fails cifs: make sure we do not overflow the max EA buffer size cifs: enable change notification for SMB2.1 dialect netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() ... Link: https://lore.kernel.org/r/20200227165205.GA7926@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-24docs: dt: fix several broken doc referencesMauro Carvalho Chehab5-5/+5
There are several DT doc references that require manual fixes. I found 3 cases fixed on this patch: - directory named "binding/" instead of "bindings/"; - .txt to .yaml renames; - file renames (still on txt format); Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-24docs: dt: fix several broken references due to renamesMauro Carvalho Chehab19-19/+19
Several DT references got broken due to txt->yaml conversion. Those are auto-fixed by running: scripts/documentation-file-ref-check --fix Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-22Merge tag 'devicetree-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds4-22/+41
Pull devicetree fixes deom Rob Herring: "A handful of fixes in DT bindings for MDIO bus, Allwinner CSI, OMAP HSMMC, and Tegra124 EMC" * tag 'devicetree-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: media: csi: Fix clocks description dt-bindings: media: csi: Add interconnects properties dt-bindings: net: mdio: remove compatible string from example dt-bindings: memory-controller: Update example for Tegra124 EMC dt-bindings: mmc: omap-hsmmc: Fix SDIO interrupt
2020-02-21Merge tag 'drm-misc-fixes-2020-02-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixesDave Airlie1-1/+5
drm-misc-fixes for v5.6-rc3: - Fix dt binding for sunxi. - Allow only 1 rotation argument, and allow 0 rotation in video cmdline. - Small compiler warning fix for panfrost. - Fix when using performance counters in panfrost when using per fd address space. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f5a6370d-9898-6c72-43e4-5bb56a99b6f2@linux.intel.com
2020-02-19dt-bindings: media: csi: Fix clocks descriptionMaxime Ripard1-12/+18
Commit 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20") introduced support for the CSI1 controller on A10 and A20 that unlike CSI0 doesn't have an ISP and therefore only have two clocks, the bus and module clocks. The clocks and clock-names properties have thus been modified to allow either two or tree clocks. However, the current list has the ISP clock at the second position, which means the bindings expects a list of either bus and isp, or bus, isp and mod. The initial intent of the patch was obviously to have bus and mod in the former case. Let's fix the binding so that it validates properly. Fixes: 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-19dt-bindings: media: csi: Add interconnects propertiesMaxime Ripard1-0/+10
The Allwinner CSI controller is sitting beside the MBUS that is represented as an interconnect. Make sure that the interconnect properties are valid in the binding. Fixes: 7866d6903ce8 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-19dt-bindings: net: mdio: remove compatible string from exampleGrygorii Strashko1-1/+0
Remove vendor specific compatible string from example, otherwise DT YAML schemas validation may trigger warnings specific to TI ti,davinci_mdio and not to the generic MDIO example. For example, the "bus_freq" is required for davinci_mdio, but not required for generic mdio example. As result following warning will be produced: mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-19dt-bindings: memory-controller: Update example for Tegra124 EMCThierry Reding1-8/+12
The example in the Tegra124 EMC device tree binding looks like an old version that doesn't contain all the required fields. Update it with a version from the current DTS files to fix the make dt_binding_check target. Reported-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> [robh: also fix missing '#reset-cells'] Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-19dt-bindings: mmc: omap-hsmmc: Fix SDIO interruptTomas Paukrt1-1/+1
SDIO interrupt must be specified correctly as IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW. Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-15Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-1/+2
Pull input updates from Dmitry Torokhov: - a few drivers have been updated to use flexible-array syntax instead of GCC extension - ili210x touchscreen driver now supports the 2120 protocol flavor - a couple more of Synaptics devices have been switched over to RMI4 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - replace zero-length array with flexible-array member Input: tca6416-keypad - replace zero-length array with flexible-array member Input: gpio_keys_polled - replace zero-length array with flexible-array member Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list Input: synaptics - enable SMBus on ThinkPad L470 Input: synaptics - switch T470s to RMI4 by default Input: gpio_keys - replace zero-length array with flexible-array member Input: goldfish_events - replace zero-length array with flexible-array member Input: psmouse - switch to using i2c_new_scanned_device() Input: ili210x - add ili2120 support Input: ili210x - fix return value of is_visible function
2020-02-12dt-bindings: display: sunxi: Fix compatibleMaxime Ripard1-1/+5
Commit f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas") introduced a YAML schema for the Allwinner TCON DT binding, but the H6 TCON-TV compatible was mistakenly set to fallback on the A83t's, while the initial documentation and the DT are using R40's. Fix that. Fixes: f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200210100455.78695-1-maxime@cerno.tech
2020-02-10Input: ili210x - add ili2120 supportLuca Weiss1-1/+2
This adds support for the Ilitek ili2120 touchscreen found in the Fairphone 2 smartphone. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20200209151904.661210-1-luca@z3ntu.xyz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-10dt-bindings: reset: intel,rcu-gw: Fix intel,global-reset schemaRob Herring1-1/+5
The intel,rcu-gw binding example has an error: Documentation/devicetree/bindings/reset/intel,rcu-gw.example.dt.yaml: reset-controller@e0000000: intel,global-reset: [[16, 30]] is too short The error isn't really correct as the problem is in how the data is encoded and the schema is not fixed up by the tooling correctly. However, array properties should describe the elements in the array, so lets do that which fixes the error in the process. Fixes: b7ab0cb00d08 ("dt-bindings: reset: Add YAML schemas for the Intel Reset controller") Cc: Dilip Kota <eswara.kota@linux.intel.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-02-08Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds10-152/+467
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds39-493/+1166
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-07Merge branch 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds8-10/+36
Pull i2c updates from Wolfram Sang: "i2c core: - huge improvements and refactorizations of the Linux I2C documentation (lots of thanks to Luca for doing it and Jean for the careful review) - subsystem wide API conversion to i2c_new_client_device() - remove obsolete parport-light driver - smaller core updates (removal of 'extern', enabling more compile testing, use more helper macros) - and quite a bunch of driver updates (new IDs, simplifications, better PM, support of atomic transfers and other improvements) i2c-mux: - The main feature is the idle-state rework of the pca954x driver from Biwen Li at24 driver: - minor maintenance: update the license tag, sort headers - move support for the write-protect pin into nvmem core - add a reference to the new wp-gpios property in nvmem to at25 bindings - add support for regulator and pm_runtime control" * 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits) i2c: cros-ec-tunnel: Fix ACPI identifier i2c: cros-ec-tunnel: Fix slave device enumeration i2c: stm32f7: add PM_SLEEP suspend/resume support i2c: cadence: Fix wording in i2c-cadence driver i2c: cadence: Fix power management order of operations i2c: cadence: Fix error printing in case of defer i2c: cadence: Handle transfer_size rollover i2c: i801: Add support for Intel Comet Lake PCH-V docs: i2c: writing-clients: properly name the stop condition docs: i2c: i2c-protocol: use same wording as smbus-protocol docs: i2c: rename sections so the overall picture is clearer docs: i2c: old-module-parameters: use monospace instead of "" docs: i2c: old-module-parameters: clarify this is for obsolete kernels docs: i2c: old-module-parameters: fix internal hyperlink docs: i2c: instantiating-devices: use monospace for sysfs attributes docs: i2c: instantiating-devices: rearrange static instatiation docs: i2c: instantiating-devices: fix internal hyperlink docs: i2c: smbus-protocol: improve I2C Block transactions description docs: i2c: smbus-protocol: fix punctuation docs: i2c: smbus-protocol: fix typo ...
2020-02-07Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds16-295/+948
Pull clk fixes from Stephen Boyd: "A collection of fixes: - Make of_clk.h self contained - Fix new qcom DT bindings that just merged to match the DTS files - Fix qcom clk driver to properly detect DFS clk frequencies - Fix the ls1028a driver to not deref a pointer before assigning it" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: of: clk: Make <linux/of_clk.h> self-contained clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for videocc-sc7180 dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180 clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for gpucc-sc7180 dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998 clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for dispcc-sc7180 clk: qcom: Get rid of fallback global names for dispcc-sc7180 dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180 clk: qcom: rcg2: Don't crash if our parent can't be found; return an error clk: ls1028a: fix a dereference of pointer 'parent' before a null check dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
2020-02-07Merge tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2-3/+13
Pull watchdog updates from Wim Van Sebroeck: - add IT8786 chipset ID - addition of sam9x60 compatible watchdog - da9062 improvements - fix UAF in reboot notifier handling in watchdog core code - other fixes and small improvements * tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: make restart handler atomic safe watchdog: mtk_wdt: mt2712: Add reset controller watchdog: mtk_wdt: mt8183: Add reset controller dt-bindings: mediatek: mt2712: Add #reset-cells dt-bindings: mediatek: mt8183: Add #reset-cells dt-bindings: watchdog: da9062: add suspend disable option watchdog: it87_wdt: add IT8786 ID watchdog: dw_wdt: ping watchdog to reset countdown before start watchdog: fix UAF in reboot notifier handling in watchdog core code watchdog: cadence: Skip printing pointer value watchdog: qcom: Use platform_get_irq_optional() for bark irq watchdog: da9062: add power management ops watchdog: make DesignWare watchdog allow users to set bigger timeout value drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
2020-02-05Merge tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwmLinus Torvalds1-2/+2
Pull pwm updates from Thierry Reding: "Mostly cleanups and minor improvements with some new chip support for some drivers" * tag 'pwm/for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits) pwm: Remove set but not set variable 'pwm' pwm: sun4i: Initialize variables before use pwm: stm32: Remove automatic output enable pwm: sun4i: Narrow scope of local variable pwm: bcm2835: Allow building for ARCH_BRCMSTB pwm: imx27: Eliminate error message for defer probe pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR pwm: sun4i: Move pwm_calculate() out of spin_lock() pwm: omap-dmtimer: Allow compiling with COMPILE_TEST pwm: omap-dmtimer: put_device() after of_find_device_by_node() pwm: omap-dmtimer: Simplify error handling pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional pwm: Implement tracing for .get_state() and .apply_state() pwm: rcar: Document inability to set duty_cycle = 0 pwm: rcar: Drop useless call to pwm_get_state() pwm: Fix minor Kconfig whitespace issues pwm: atmel: Implement .get_state() pwm: atmel: Use register accessors for channels pwm: atmel: Document known weaknesses of both hardware and software pwm: atmel: Replace loop in prescale calculation by ad-hoc calculation ...
2020-02-05Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-0/+6
Pull iommu updates from Joerg Roedel: - Allow compiling the ARM-SMMU drivers as modules. - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code collected by Will Deacon. The merge-commit (6855d1ba7537) has all the details. - Cleanup of the iommu_put_resv_regions() call-backs in various drivers. - AMD IOMMU driver cleanups. - Update for the x2APIC support in the AMD IOMMU driver. - Preparation patches for Intel VT-d nested mode support. - RMRR and identity domain handling fixes for the Intel VT-d driver. - More small fixes and cleanups. * tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/amd: Remove the unnecessary assignment iommu/vt-d: Remove unnecessary WARN_ON_ONCE() iommu/vt-d: Unnecessary to handle default identity domain iommu/vt-d: Allow devices with RMRRs to use identity domain iommu/vt-d: Add RMRR base and end addresses sanity check iommu/vt-d: Mark firmware tainted if RMRR fails sanity check iommu/amd: Remove unused struct member iommu/amd: Replace two consecutive readl calls with one readq iommu/vt-d: Don't reject Host Bridge due to scope mismatch PCI/ATS: Add PASID stubs iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device iommu/arm-smmu-v3: Improve add_device() error handling iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE iommu/arm-smmu-v3: Add second level of context descriptor table iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure iommu/arm-smmu-v3: Propagate ssid_bits iommu/arm-smmu-v3: Add support for Substream IDs iommu/arm-smmu-v3: Add context descriptor tables allocators iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support ACPI/IORT: Parse SSID property of named component node ...
2020-02-05dt-bindings: Fix paths in schema $id fieldsRob Herring22-22/+22
The $id path checks were inadequately checking the path part of the $id value. With the check fixed, there's a number of errors that need to be fixed. Most of the errors are including 'bindings/' in the path which should not be as that is considered the root. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Stefan Popa <stefan.popa@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Marcus Folkesson <marcus.folkesson@gmail.com> Cc: Kent Gustavsson <kent@minoris.se> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-clk@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-04dt-bindings: PCI: intel: Fix dt_binding_check compilation failureDilip Kota1-3/+1
Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as it is not present in the mainline tree. Use numeric value instead of LGM_GCLK_PCIE10 macro. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> [robh: Also drop interrupt-parent from example] Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-04dt-bindings: phy: Fix errors in intel,lgm-emmc-phy exampleRob Herring1-1/+3
DT labels can't have '-' in them causing a compile failure in the example. Fixing that leads to more warnings: Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:23.13-33: Warning (reg_format): /example-0/chiptop@e0200000/emmc-phy@a8:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #address-cells value Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #size-cells value Fixes: 5bc999108025 ("dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY") Cc: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Cc: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-04Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds1-4/+4
Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ...
2020-02-04Merge tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteprocLinus Torvalds3-2/+101
Pull remoteproc updates from Bjorn Andersson: "This adds support for the Mediatek MT8183 SCP, modem remoteproc on Qualcomm SC7180 platform, audio and sensor remoteprocs on Qualcomm MSM8998 and audio, compute, modem and sensor remoteprocs on Qualcomm SM8150. It adds votes for necessary power-domains for all Qualcomm TrustZone based remoteproc instances are held, fixes a bug related to remoteproc drivers registering before the core has been initialized and does clean up the Qualcomm modem remoteproc driver" * tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (21 commits) remoteproc: qcom: q6v5-mss: Improve readability of reset_assert remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout remoteproc: qcom: q6v5-mss: Rename boot status timeout remoteproc: qcom: q6v5-mss: Improve readability across clk handling remoteproc: use struct_size() helper remoteproc: Initialize rproc_class before use rpmsg: add rpmsg support for mt8183 SCP. remoteproc/mediatek: add SCP support for mt8183 dt-bindings: Add a binding for Mediatek SCP remoteproc: mss: q6v5-mss: Add modem support on SC7180 dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180 remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC remoteproc: q6v5-mss: Remove mem clk from the active pool remoteproc: qcom: Remove unneeded semicolon remoteproc: qcom: pas: Add auto_boot flag remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI support dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS and SLPI support remoteproc: qcom: pas: Vote for active/proxy power domains dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS ...
2020-02-03dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180Douglas Anderson2-13/+77
This makes the qcom,videocc bindings match the recent changes to the dispcc and gpucc. 1. Switched to using "bi_tcxo" instead of "xo". 2. Adds a description for the XO clock. Not terribly important but nice if it cleanly matches its cousins. 3. Updates the example to use the symbolic name for the RPMH clock and also show that the real devices are currently using 2 address cells / size cells and fixes the spacing on the closing brace. 4. Split into 2 files. In this case they could probably share one file, but let's be consistent. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.11.I27bbd90045f38cd3218c259526409d52a48efb35@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998Douglas Anderson4-72/+210
The qcom,gpucc bindings had a few problems with them: 1. When things were converted to yaml the name of the "gpll0 main" clock got changed from "gpll0" to "gpll0_main". Change it back for msm8998. 2. Apparently there is a push not to use purist aliases for clocks but instead to just use the internal Qualcomm names. For sdm845 and sc7180 (where the drivers haven't already been changed) move in this direction. Things were also getting complicated harder to deal with by jamming several SoCs into one file. Splitting simplifies things. Fixes: 5c6f3a36b913 ("dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.7.I513cd73b16665065ae6c22cf594d8b543745e28c@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-03dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180Douglas Anderson3-67/+183
The qcom,dispcc bindings had a few problems with them: 1. They didn't specify all the clocks that dispcc is a client of. Specifically on sc7180 there are two clocks from the DSI PHY and two from the DP PHY. On sdm845 there are actually two DSI PHYs (each of which has two clocks) and an extra clock from the gcc. These all need to be specified. 2. The sdm845.dtsi has existed for quite some time without specifying the clocks. The Linux driver was relying on global names to match things up. While we should transition things, it should be noted in the bindings. 3. The names used the bindings for "xo" and "gpll0" didn't match the names that QC used for these clocks internally and this was causing confusion / difficulty with their code generation tools. Switched to the internal names to simplify everyone's lives. It's not quite as clean in a purist sense but it should avoid headaches. This officially changes the binding, but that seems OK in this case. Also note that I updated the example. Fixes: 5d28e44ba630 ("dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200203103049.v4.2.I0c4bbb0f75a0880cd4bd90d8b267271e2375e0d0@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-02-04Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds2-17/+49
Pull RTC updates from Alexandre Belloni: "The VL_READ and VL_CLR ioctls have been reworked to be more useful. This will not break userspace as there are very few users and they are using the integer value as a boolean. Apart from that, two drivers were reworked and a few fixes here and there for a net reduction of number of lines. Summary: Subsystem: - the VL_READ and VL_CLR ioctls are now documented and their behavior is unified across all the drivers. - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and REGMAP_SPI unecessarily. Drivers: - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2 compatibles. - cmos: solve lost interrupts issue on MS Surface 3 - hym8563: return proper errno when time is invalid - rv3029: many fixes, nvram support" * tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits) dt-bindings: rtc: at91rm9200: document clocks property rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed rtc: Kconfig: select REGMAP_I2C when necessary rtc: Kconfig: properly indent sd3078 entry rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper rtc: cmos: Use predefined value for RTC IRQ on legacy x86 rtc: cmos: Stop using shared IRQ rtc: tps6586x: Use IRQ_NOAUTOEN flag rtc: at91rm9200: use FIELD_PREP/FIELD_GET rtc: at91rm9200: avoid time readout in at91_rtc_setalarm rtc: at91rm9200: move register definitions to C file rtc: at91rm9200: add sama5d4 and sama5d2 compatibles dt-bindings: rtc: at91rm9200: convert bindings to json-schema rtc: at91rm9200: remove procfs information dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc rtc: pcf8563: Use BIT rtc: moxart: Convert to SPDX identifier rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv rtc: rx8025: Remove struct i2c_client from struct rx8025_data rtc: hym8563: Read the valid flag directly instead of caching it ...
2020-02-03Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds19-113/+699
Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-02-03Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds5-89/+164
Pull input updates from Dmitry Torokhov: - a driver for SGI IOC3 PS/2 controller - updates to driver for FocalTech FT5x06 series touch screen controllers - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - switch to reduced reporting mode dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema dt-bindings: touchscreen: Add touchscreen schema Input: add IOC3 serio driver Input: axp20x-pek - enable wakeup for all AXP variants Input: axp20x-pek - respect userspace wakeup configuration Input: ads7846 - use new `delay` structure for SPI transfer delays Input: edt-ft5x06 - use pm core to enable/disable the wake irq Input: edt-ft5x06 - make wakeup-source switchable Input: edt-ft5x06 - document wakeup-source capability Input: edt-ft5x06 - alphabetical include reorder Input: edt-ft5x06 - work around first register access error Input: apbps2 - add __iomem to register struct Input: axp20x-pek - make device attributes static Input: elants_i2c - check Remark ID when attempting firmware update
2020-02-03dt-bindings: clk: qcom: Fix self-validation, split, and clean cruftDouglas Anderson8-194/+529
The 'qcom,gcc.yaml' file failed self-validation (dt_binding_check) because it required a property to be either (3 entries big), (3 entries big), or (7 entries big), but not more than one of those things. That didn't make a ton of sense. This patch splits all of the exceptional device trees (AKA those that would have needed if/then/else rules) from qcom,gcc.yaml. It also cleans up some cruft found while doing that. After this lands, this worked for me atop clk-next with just the known error about msm8998: for f in \ Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml \ Documentation/devicetree/bindings/clock/qcom,gcc.yaml; do \ ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=$f; \ done I then picked this patch atop linux-next (next-20200129) and ran: # Delete broken yaml: rm Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml ARCH=arm64 make dt_binding_check | grep 'clock/qcom' ...and that didn't seem to indicate problems. Arbitrary decisions made (yell if you want changed): - Left all the older devices (where clocks / clock-names weren't specified) in a single file. - Didn't make clocks "required" for msm8996 but left them as listed. This seems a little weird but it matches the old binding. Misc cleanups as part of this patch: - Fixed schema id to not have "bindings/" as per Rob [1]. - Listed include files as per Stephen. - sm8150 was claimed to be same set of clocks as sc7180, but driver and dts appear to say that "bi_tcxo_ao" doesn't exist. Fixed. - In "apq8064", "#thermal-sensor-cells" was missing the "#". - Got rid of "|" at the end of top description since spacing doesn't matter. - Changed indentation to consistently 2 spaces (it was 3 in some places). - Added period at the end of protected-clocks description. - No space before ":". - Updated sc7180/sm8150 example to use the 'qcom,rpmh.h' include. - Updated sc7180/sm8150 example to use larger address/size cells as per reality. - Updated sc7180/sm8150 example to point to the sleep_clk rather than <0>. - Made it so that gcc-ipq8074 didn't require #power-domain-cells since actual dts didn't have it and I got no hits from: git grep _GDSC include/dt-bindings/clock/qcom,gcc-ipq8074.h - Made it so that gcc-qcs404 didn't require #power-domain-cells since actual dts didn't have it and I got no hits from: git grep _GDSC include/dt-bindings/clock/qcom,gcc-qcs404.h Noticed, but not done in this patch (volunteers needed): - Add "aud_ref_clk" to sm8150 bindings / dts even though I found a reference to it in "gcc-sm8150.c". - Fix node name in actual ipq8074 to be "clock-controller" (it's gcc). - Since the example doesn't need phandes to exist, in msm8998 could just make up places providing some of the clocks currently bogused out with <0>. - On msm8998 clocks are listed as required but current dts doesn't have them. [1] https://lore.kernel.org/r/CAL_Jsq+_2E-bAbP9F6VYkWRp0crEyRGa5peuwP58-PZniVny7w@mail.gmail.com Fixes: ab91f72e018a ("clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20200203094843.v3.1.I4452dc951d7556ede422835268742b25a18b356b@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>