aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)AuthorFilesLines
2020-05-06dt-bindings: documenting compatible string vendor "visionox"Harigovindan P1-0/+2
Documenting compatible string vendor "visionox" in vendor-prefix yaml file. Signed-off-by: Harigovindan P <harigovi@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200429054515.4976-2-harigovi@codeaurora.org
2020-05-06serial: samsung: dt-bindings: Add reg-io-width compatibleHyunki Koo1-0/+8
Add a description for reg-io-width options for the samsung serial UART peripheral. Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200506080242.18623-2-hyunki00.koo@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-06dt-bindings: reset: imx7: Document usage on i.MX8MP SoCAnson Huang1-1/+3
The driver now supports i.MX8MP, so update bindings accordingly. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06dt-bindings: reset: imx7: Add support for i.MX8MNAnson Huang1-1/+3
i.MX8MN can reuse i.MX8MQ's reset driver, update the compatible property and related info to support i.MX8MN. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06dt-bindings: backlight: qcom-wled: Add WLED5 bindingsKiran Gunda1-3/+56
Add WLED5 specific bindings. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-06dt-bindings: backlight: qcom-wled: Convert the wled bindings to .yaml formatKiran Gunda2-154/+208
Convert the qcom-wled bindings from .txt to .yaml format. Also replace PM8941 to WLED3 and PMI8998 to WLED4. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-06dt-bindings: phy: usb-snps-femto-v2: Add regulator entries to exampleWesley Cheng1-0/+4
Fix errors reported by dt_binding_check, due to missing required regulators in the example node. Fixes: f06b9fc9a814 ("dt-bindings: phy: Add binding for qcom,usb-snps-femto-v2") Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reported-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1588753589-22673-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05dt-binding: net: ti: am65x-cpts: fix dt_binding_check failGrygorii Strashko2-2/+2
Fix dt_binding_check fail: Fix Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml# Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.6/dist-packages/dtschema/schemas/net/ti,am654-cpts.yaml' Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml# Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.6/dist-packages/dtschema/schemas/net/ti,am654-cpts.yaml' Cc: Rob Herring <robh@kernel.org> Fixes: 6e87ac748e94 ("dt-binding: ti: am65x: document common platform time sync cpts module") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05dt-bindings: iommu: renesas,ipmmu-vmsa: convert to json-schemaYoshihiro Shimoda2-73/+98
Convert Renesas VMSA-Compatible IOMMU bindings documentation to json-schema. Note that original documentation doesn't mention renesas,ipmmu-vmsa for R-Mobile APE6. But, R-Mobile APE6 is similar to the R-Car Gen2. So, renesas,ipmmu-r8a73a4 belongs the renesas,ipmmu-vmsa section. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-05media: dt-bindings: media: rockchip-vpu: fix interrupt-namesJohan Jonker1-2/+5
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000: interrupts: [[0, 9, 4]] is too short arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000: interrupt-names: ['vdpu'] is too short arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000: interrupt-names:0: 'vepu' was expected With the conversion of rockchip-vpu.txt to yaml the correct 'interrupt-names' for rk3328 was not included, so add them now. Also add 'minItems' to 'interrupts'for the completeness. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-vpu.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-05spi: dw-apb-ssi: Add Intel Keem Bay supportWan Ahmad Zainie1-1/+2
Document Intel Keem Bay SPI controller DT bindings. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Link: https://lore.kernel.org/r/20200505130618.554-7-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-05spi: dw-apb-ssi: Add compatible string for DesignWare DWC_ssiWan Ahmad Zainie1-1/+1
This patch adds compatible string "snps,dwc-ssi-1.01a" to the above DT binding document, to provide support for DesignWare DWC_ssi IP [1]. Current driver supports DW_apb_ssi IP [2]. References: [1] https://www.synopsys.com/dw/ipdir.php?c=dwc_ssi [2] https://www.synopsys.com/dw/ipdir.php?c=DW_apb_ssi Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Link: https://lore.kernel.org/r/20200505130618.554-5-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-05dt-bindings: sound: lpass-cpu: Document DAI subnodesStephan Gerhold1-0/+25
The lpass-cpu driver now allows configuring the MI2S SD lines by defining subnodes for one of the DAIs. Document this in the device tree bindings. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200425184657.121991-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-05dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic GXL and GXM Families USB Glue BindingsNeil Armstrong1-4/+69
The Amlogic GXL and GXM is slightly different from the Amlogic G12A Glue. The GXL SoCs only embeds 2 USB2 PHYs and no USB3 PHYs, and the GXM SoCs embeds 3 USB2 PHYs. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05dt-bindings: usb: qcom,dwc3: Add compatible for SC7180Sandeep Maheswaram1-0/+1
Add compatible for SC7180 in usb dwc3 bindings. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindingsSandeep Maheswaram2-104/+158
Convert USB DWC3 bindings to DT schema format using json-schema. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05dt-bindings: usb: document aspeed vhub device ID/string propertiesTao Ren1-0/+68
Update device tree binding document for aspeed vhub's device IDs and string properties. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05dt-bindings: display: Add Chrontel CH7033 Video Encoder bindingLubomir Rintel1-0/+77
Add binding document for the Chrontel CH7033 VGA/DVI/HDMI Encoder. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-3-lkundrak@v3.sk
2020-05-05dt-bindings: Add vendor prefix for Chrontel, Inc.Lubomir Rintel1-0/+2
Chrontel makes encoders for video displays and perhaps other stuff. Their web site is http://www.chrontel.com/. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-2-lkundrak@v3.sk
2020-05-05dt-bindings: ath10k: Add wifi-firmware subnode for wifi nodeRakesh Pillai1-0/+14
Add a wifi-firmware subnode for the wifi node. This wifi-firmware subnode is needed for the targets which do not support TrustZone. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1586971906-20985-2-git-send-email-pillair@codeaurora.org
2020-05-05dt-bindings: phy: Add binding for qcom,usb-snps-femto-v2Wesley Cheng1-0/+76
This binding shows the descriptions and properties for the Synopsis Femto USB PHY V2 used on QCOM platforms. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/1588636467-23409-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-04docs: dt: convert writing-bindings.txt to ReSTMauro Carvalho Chehab2-0/+8
- Add a SPDX header; - Adjust document and section titles; - Mark literal blocks as such; - Add it to bindings/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-04docs: dt: convert submitting-patches.txt to ReST formatMauro Carvalho Chehab3-4/+11
- Add a SPDX header; - Adjust document and section titles; - Mark literal blocks as such; - Add it to bindings/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-04docs: dt: convert ABI.txt to ReST formatMauro Carvalho Chehab4-3/+16
This file only requires a properly-formatted title to be recognized as a ReST file. As there will be more files under bindings/ that will be included at the documentation body, add a new index.rst file there. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-04dt-bindings: display: dw_mipi_dsi.txt: convert to yamlAdrian Ratiu2-32/+68
This converts the Synopsis MIPI DSI binding documentation to yaml and should be quite straightforward. I've added a missing ref clk and also added Philippe as maintainer b/c he's the original txt author following the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org. Cc: Philippe CORNU <philippe.cornu@st.com> Cc: devicetree@vger.kernel.org Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200423100058.1734009-1-adrian.ratiu@collabora.com
2020-05-04dt-binding: ti: am65x: document common platform time sync cpts moduleGrygorii Strashko2-0/+159
Document device tree bindings for TI AM654/J721E SoC The Common Platform Time Sync (CPTS) module. The CPTS module is used to facilitate host control of time sync operations. Main features of CPTS module are: - selection of multiple external clock sources - 64-bit timestamp mode in ns with ppm and nudge adjustment. - control of time sync events via interrupt or polling - hardware timestamp of ext. events (HWx_TS_PUSH) - periodic generator function outputs (TS_GENFx) - PPS in combination with timesync router - Depending on integration it enables compliance with the IEEE 1588-2008 standard for a precision clock synchronization protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time Measurement (PTM). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04dt-bindings: net: add IPA iommus propertyAlex Elder1-1/+9
The IPA accesses "IMEM" and main system memory through an SMMU, so its DT node requires an iommus property to define range of stream IDs it uses. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04ASoC: rt1308: Revise the devicetree file modeOder Chiou1-0/+0
The patch changes the devicetree file mode correctly. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200504074007.13002-1-oder_chiou@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-04dt-bindings: phy-qcom-ipq4019-usb: add binding documentRobert Marko1-0/+50
This patch adds the binding documentation for the HS/SS USB PHY found inside Qualcom Dakota SoCs. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200503201823.531757-2-robert.marko@sartura.hr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-04dt-bindings: arm: Add Akebi96 board supportMasami Hiramatsu1-0/+1
Add uniphier-ld20-akebi96 compatible string for Akebi96 board support. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2020-05-03dt-bindings: arm: Add Calxeda system registers json-schema bindingAndre Przywara1-0/+49
The Calxeda system registers are a collection of MMIO register controlling several more general aspects of the SoC. Beside for some power management tasks this node is also somewhat abused as the container for the clock nodes. Add a binding in DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: ipmi: Convert IPMI-SMIC bindings to json-schemaAndre Przywara2-25/+63
Convert the generic IPMI controller bindings to DT schema format using json-schema. The device_type property is deprecated for most node per the DT spec, but at least the Linux driver matches on it, so I keep it in. The Linux driver parses for some additional and optional properties, but there are no in-tree users. Let's allow extra properties to cover any other users. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: memory-controllers: Convert Calxeda DDR to json-schemaAndre Przywara2-16/+42
Convert the Calxeda DDR memory controller binding to DT schema format using json-schema. Although this technically covers the whole DRAM controller, the intention to use it only for error reporting and mapping fault addresses to DRAM chips. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: arm: Convert Calxeda L2 cache controller to json-schemaAndre Przywara2-15/+42
Convert the L2-ECC controller binding to DT schema format using json-schema. This is indented to be just used for error reporting. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schemaAndre Przywara2-17/+51
Convert the Calxeda ComboPHY binding to DT schema format using json-schema. There is no driver in the Linux kernel matching the compatible string, but the nodes are parsed by the SATA driver, which links to them using its port-phys property. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: net: Convert Calxeda Ethernet binding to json-schemaAndre Przywara2-18/+49
Convert the Calxeda XGMAC Ethernet device binding to DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: sata: Convert Calxeda SATA controller to json-schemaAndre Przywara2-44/+95
Convert the Calxeda Highbank SATA controller binding to DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: clock: Convert Calxeda clock bindings to json-schemaAndre Przywara2-17/+82
Convert the Calxeda clock bindings to DT schema format using json-schema. This just covers the actual PLL and divider clock nodes. In the actual DTs they are somewhat unconnected (no ranges or bus compatible) children of the sregs node, but for the actual clock bindings this is not relevant. One oddity is that the addresses are relative to the parent node, without that being pronounced using a ranges property. But this is too late to fix now. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: Remove cases of 'allOf' containing a '$ref'Rob Herring122-1446/+1133
json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock Signed-off-by: Rob Herring <robh@kernel.org>
2020-05-03dt-bindings: power: supply: add cw2015_battery bindingsTobias Schramm1-0/+82
This patch adds the dts binding schema for the cw2015 fuel gauge. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-03dt-bindings: Document cellwise vendor-prefixTobias Schramm1-0/+2
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-03iio: DAC extension for ltc2634-12/10/8Chris Ruehl1-1/+7
This patch add support for Analog Devices (Linear Technology) LTC2634 Quad 12-/10-/8-Bit Rail-to-Rail DAC. The SPI functionality based on them from LTC2632 therefor add the definitions only and update the Kconfig. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03dt-bindings: magnetometer: ak8974: Add Alps hscdtd008aNick Reitemeyer1-1/+3
Add binding documentation for the Alps HSCDTD008A, which is similar to the ak8974. Signed-off-by: Nick Reitemeyer <nick.reitemeyer@web.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03dt-bindings: iio: chemical: Add binding for CCS811 VOC sensorManivannan Sadhasivam1-0/+53
This commit adds devicetree binding for AMS CCS811 VOC sensor. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03dt-bindings: iio: Add adis16475 documentationNuno Sá1-0/+137
Document the ADIS16475 device devicetree bindings Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-02Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-4/+3
Pull dmaengine fixes from Vinod Koul: "Core: - Documentation typo fixes - fix the channel indexes - dmatest: fixes for process hang and iterations Drivers: - hisilicon: build error fix without PCI_MSI - ti-k3: deadlock fix - uniphier-xdmac: fix for reg region - pch: fix data race - tegra: fix clock state" * tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dmatest: Fix process hang when reading 'wait' parameter dmaengine: dmatest: Fix iteration non-stop logic dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization dmaengine: fix channel index enumeration dmaengine: mmp_tdma: Reset channel error on release dmaengine: mmp_tdma: Do not ignore slave config validation errors dmaengine: pch_dma.c: Avoid data race between probe and irq handler dt-bindings: dma: uniphier-xdmac: switch to single reg region include/linux/dmaengine: Typos fixes in API documentation dmaengine: xilinx_dma: Add missing check for empty list dmaengine: ti: k3-psil: fix deadlock on error path dmaengine: hisilicon: Fix build error without PCI_MSI
2020-05-02dt-bindings: power: Convert power_supply text to yamlDan Murphy2-23/+42
Convert the power_supply.txt to power-supply.yaml. This conversion entailed fixing up the binding to being yaml and dt checker compliant. Added a note in the power_supply.txt to reference the power-supply.yaml Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-02dt-bindings: Add binding for IT6505.allen1-0/+91
Add a DT binding documentation for IT6505. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed example to use i2c] Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-3-git-send-email-allen.chen@ite.com.tw
2020-05-02dt-bindings: fix vendor prefix for ITE Tech. Inc.allen1-1/+1
ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC design house. ITE's core technology includes PC and NB Controller chips, Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing, Surveillance, OFDM, Sensor Fusion, and so on. Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.". more information on: http://www.ite.com.tw/ Signed-off-by: Allen Chen <allen.chen@ite.com.tw> Acked-by: Rob Herring <robh@kernel.org> Fixes: 17ff9478ffa3 ("dt-bindings: Add ITE Tech prefix") Cc: Marek Vasut <marex@denx.de> Cc: devicetree@vger.kernel.org Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag and updated subject] Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-2-git-send-email-allen.chen@ite.com.tw
2020-05-01dt-bindings: Add a minimum version check for dtschemaRob Herring1-3/+11
The dtschema package must be somewhat up to date as the tools and meta-schema checks are still evolving. Implement a version check, so this can be enforced. This will help ensure new schema submissions get checked against the latest meta-schemas. Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.