| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
|
|
A recent snafu where Intel ignored upstream feedback on a firmware
change, led to a late rc6 fix being required. In order to avoid this
in the future we should document some expectations around
linux-firmware.
I was originally going to write this for drm, but it seems quite generic
advice.
v2: rewritten with suggestions from Thorsten Leemhuis
v3: rewritten with suggestions from Mauro
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20220721044352.3110507-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This can be used by subsystems to unregister a platform device registered
by sysfb and also to disable future platform device registration in sysfb.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com
|
|
Add additional sysfs nodes to monitor the transfer of firmware upload data
to the target device:
cancel: Write 1 to cancel the data transfer
error: Display error status for a failed firmware upload
remaining_size: Display the remaining amount of data to be transferred
status: Display the progress of the firmware upload
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-6-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extend the firmware subsystem to support a persistent sysfs interface that
userspace may use to initiate a firmware update. For example, FPGA based
PCIe cards load firmware and FPGA images from local FLASH when the card
boots. The images in FLASH may be updated with new images provided by the
user at his/her convenience.
A device driver may call firmware_upload_register() to expose persistent
"loading" and "data" sysfs files. These files are used in the same way as
the fallback sysfs "loading" and "data" files. When 0 is written to
"loading" to complete the write of firmware data, the data is transferred
to the lower-level driver using pre-registered call-back functions. The
data transfer is done in the context of a kernel worker thread.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-5-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without this patch, the "Firmware is not accessible [...]" line is
rendered in bold, which does not seem intentional.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20200905184131.1280337-1-j.neuschaefer@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the doubled word "call".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200704034502.17199-6-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the doubled word "firmware".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200704034502.17199-5-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the doubled word "if".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200704034502.17199-4-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the doubled word "for".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200704034502.17199-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
|
|
In some cases the platform's main firmware (e.g. the UEFI fw) may contain
an embedded copy of device firmware which needs to be (re)loaded into the
peripheral. Normally such firmware would be part of linux-firmware, but in
some cases this is not feasible, for 2 reasons:
1) The firmware is customized for a specific use-case of the chipset / use
with a specific hardware model, so we cannot have a single firmware file
for the chipset. E.g. touchscreen controller firmwares are compiled
specifically for the hardware model they are used with, as they are
calibrated for a specific model digitizer.
2) Despite repeated attempts we have failed to get permission to
redistribute the firmware. This is especially a problem with customized
firmwares, these get created by the chip vendor for a specific ODM and the
copyright may partially belong with the ODM, so the chip vendor cannot
give a blanket permission to distribute these.
This commit adds a new platform fallback mechanism to the firmware loader
which will try to lookup a device fw copy embedded in the platform's main
firmware if direct filesystem lookup fails.
Drivers which need such embedded fw copies can enable this fallback
mechanism by using the new firmware_request_platform() function.
Note that for now this is only supported on EFI platforms and even on
these platforms firmware_fallback_platform() only works if
CONFIG_EFI_EMBEDDED_FIRMWARE is enabled (this gets selected by drivers
which need this), in all other cases firmware_fallback_platform() simply
always returns -ENOENT.
Reported-by: Dave Olsthoorn <dave@bewaar.me>
Suggested-by: Peter Jones <pjones@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115163554.101315-5-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Let the description of the efi/libstub/mem.c functions appear in the kernel
API documentation in the following chapters:
The Linux driver implementer’s API guide
Linux Firmware API
UEFI Support
UEFI stub library functions
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200221035832.144960-1-xypron.glpk@gmx.de
Link: https://lore.kernel.org/r/20200308080859.21568-9-ardb@kernel.org
|
|
The stratix10 service layer documentation tried to include a kerneldoc
comments for a nonexistent struct; leading to a "no structured comments
found" message. Switch it to stratix10_svc_command_config_type, which
appears at that spot in the sequence and was not included.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add Intel Stratix10 service layer driver document
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The firmware loader has a fallback mechanism, and it now has some proper
kdoc, but we forgot to update the Documentation to use the new kdoc. Fix
that.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clarify the provenance of the firmware loader firmware_class module name
and why we cannot rename the module in the future.
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a few typos, and clarify a few sentences.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the firmware loader only exposes one silent path for querying
optional firmware, and that is firmware_request_direct(). This function
also disables the sysfs fallback mechanism, which might not always be the
desired behaviour [0].
This patch introduces a variations of request_firmware() that enable the
caller to disable the undesired warning messages but enables the sysfs
fallback mechanism. This is equivalent to adding FW_OPT_NO_WARN to the
old behaviour.
[0]: https://git.kernel.org/linus/c0cc00f250e1
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
[mcgrof: used the old API calls as the full rename is not done yet, and
add the caller for when FW_LOADER is disabled, enhance documentation ]
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Including:
- Fixup outdated kernel-doc paths
- Slightly too short title underline
- Some typos
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
firmware_class.c was split into several files under
drivers/base/firmware_loader. The new main.c has the functions which
/request_firmware.rst references.
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some devices have an optimization in place to enable the firmware to
be retaineed during a system reboot, so after reboot the device can skip
requesting and loading the firmware. This can save up to 1s in load
time. The mt7601u 802.11 device happens to be such a device.
When these devices retain the firmware on a reboot and then suspend
they can miss looking for the firmware on resume. To help with this we
need a way to cache the firmware when such an optimization has taken
place.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reflects much clearer what is being done.
While at it, kdoc'ify it.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We've removed the option, so stop talking about it.
Signed-off-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fix a spelling typo found in fallback-mechanisms.rst
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 81f95076281fdd3bc382e004ba1bce8e82fccbce.
It causes random failures of firmware loading at resume time (well,
random for me, it seems to be more reliable for others) because the
firmware disabling is not actually synchronous with any particular
resume event, and at least the btusb driver that uses a workqueue to
load the firmware at resume seems to occasionally hit the "firmware
loading is disabled" logic because the firmware loader hasn't gotten the
resume event yet.
Some kind of sanity check for not trying to load firmware when it's not
possible might be a good thing, but this commit was not it.
Greg seems to have silently suffered the same issue, and pointed to the
likely culprit, and Gabriel C verified the revert fixed it for him too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Pointed-at-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Gabriel C <nix.or.die@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The firmware API should not be used after we go to suspend
and after we reboot/halt. The suspend/resume case is a bit
complex, so this documents that so things are clearer.
We want to know about users of the API in incorrect places so
that their callers are corrected, so this also adds a warn
for those cases.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are several stuff there that are actually driver-specific.
Move those to the driver_api book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Understanding this code is getting out of control without any
notes. Give the firmware_class driver a much needed documentation love,
and while at it convert it to the new sphinx documentation format.
v2: typos and small fixes
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Linus Torvalds
Dave Airlie
Javier Martinez Canillas
Russ Weight
Jonathan Neuschäfer
Randy Dunlap
Hans de Goede
Heinrich Schuchardt
Jonathan Corbet
Richard Gong
Luis R. Rodriguez
Andres Rodriguez
Benjamin Gilbert
Masanari Iida
Mauro Carvalho Chehab