| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since 2017, there is an space reserved for userspace API,
created by changeset 1d596dee3862 ("docs: Create a user-space API guide").
As the media subsystem was one of the first subsystems to use
Sphinx, until this patch, we were keeping things on a separate
place.
Let's just use the new location, as having all uAPI altogether
will likely make things easier for developers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Avoid cell overlapping by changing some sizes, and changing the
font sizes when needed.
Tested with Sphinx 1.7.8.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
All those files are under GFDL 1.1 or later, with no invariant sections.
Tag them as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This is not needed there. Also, the same UTF-8 encoding should
be used on all documents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
There appears to be an issue in using \small in certain cases on Sphinx
1.4 and 1.5. Other format documents don't use \small either, remove it
from here as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[mchehab@s-opensource.com: kept tabularcolumns - readjusted - and
add a few blank lines for it to display better]
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Sphinx 1.6 generates some LaTeX code before each table,
starting its own environment before calling tabulary,
apparently to improve table layout.
The problem is that such environment is incompatible with
adjustbox. While, in thesis, it should be possible to override
it or to redefine tabulary, I was unable to produce such patch.
Also, that would likely break on some future Sphinx version.
So, instead, let's just change the font size on bigger tables,
in order for them to fit into the page size. That is not as
good as adjustbox, and require some manual work, but it should
be less sensitive to Sphinx changes.
While here, adjust a few other tables whose text is exceeding
the cell boundaries.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The documentation simply mentioned that one of the four pixel orders was
used in the example. Now specify the exact pixelformat instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Shorten the tables by removing row numbers in comments, allowing for
later insertion of rows with minimal diffs.
All changes have been generated by the following script.
import io
import re
import sys
def process_table(fname, data):
if fname.endswith('hist-v4l2.rst'):
data = re.sub(u'\n{1,2}\t( ?) -( ?) ?', u'\n\t\\1 -\\2', data, flags = re.MULTILINE)
data = re.sub(u'\n(\t| )- \.\. row [0-9]+\n\t ?-( ?) ?', u'\\1* -\\2', data, flags = re.MULTILINE)
else:
data = re.sub(u'\n{1,2} -( ?) ?', u'\n -\\1', data, flags = re.MULTILINE)
data = re.sub(u'(\n?)(\n\n - \.\. row 1\n)', u'\n\\2', data, flags = re.MULTILINE)
data = re.sub(u'\n - \.\. row [0-9]+\n -( ?) ?', u' * -\\1', data, flags = re.MULTILINE)
data = re.sub(u'\n - \.\. row [0-9]+\n \.\. (_[A-Z0-9_`-]*:)', u'\n - .. \\1', data, flags = re.MULTILINE)
data = re.sub(u'\n - \.\. (_[A-Z0-9_`-]*:)\n -', u' * .. \\1\n\n -', data, flags = re.MULTILINE)
data = re.sub(u'^ - ', u' -', data, flags = re.MULTILINE)
data = re.sub(u'^(\t{1,2}) ', u'\\1', data, flags = re.MULTILINE)
return data
def process_file(fname, data):
buf = io.StringIO(data)
output = ''
in_table = False
table_separator = 0
for line in buf.readlines():
if line.find('.. flat-table::') != -1:
in_table = True
table = ''
elif in_table and not re.match('^[\t\n]|( )', line):
in_table = False
output += process_table(fname, table)
if in_table:
table += line
else:
output += line
if in_table:
in_table = False
output += process_table(fname, table)
return output
fname = sys.argv[1]
data = file(fname, 'rb').read().decode('utf-8')
data = process_file(fname, data)
file(fname, 'wb').write(data.encode('utf-8'))
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
- Explicitly state that the most significant n bits are zeroed on 10 and
12 bpp formats.
- Remove extra comma from the last entry of the format list
- Add a missing colon before a list
- Use figures versus word numerals consistently
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The 10-bit packed raw bayer format documented that the data of the first
pixel of a four-pixel group was found in the first byte and the two
highest bits of the fifth byte. This was not entirely correct. The two
bits in the fifth byte are the two lowest bits. The second pixel occupies
the second byte and third and fourth least significant bits and so on.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Those hints are wrong, and doesn't really improve the look
of those tables. So, keep them only when they're useful.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
LaTeX doesn't handle too well auto-width on tables, and ReST
markup requires an special tag to give it the needed hints.
As we're using A4 paper, we have 17cm of useful spaces. As
most media tables have widths, let's use it to generate the
needed via the following perl script:
my ($line_size, $table_header, $has_cols) = (17.5, 0, 0);
my $out;
my $header = "";
my @widths = ();
sub round { $_[0] > 0 ? int($_[0] + .5) : -int(-$_[0] + .5) }
while (<>) {
if (!$table_header) {
$has_cols = 1 if (m/..\s+tabularcolumns::/);
if (m/..\s+flat-table::/) {
$table_header = 1;
$header = $_;
next;
}
$out .= $_;
next;
}
$header .= $_;
@widths = split(/ /, $1) if (m/:widths:\s+(.*)/);
if (m/^\n$/) {
if (!$has_cols && @widths) {
my ($tot, $t, $i) = (0, 0, 0);
foreach my $v(@widths) { $tot += $v; };
$out .= ".. tabularcolumns:: |";
for ($i = 0; $i < scalar @widths - 1; $i++) {
my $v = $widths[$i];
my $w = round(10 * ($v * $line_size) / $tot) / 10;
$out .= sprintf "p{%.1fcm}|", $w;
$t += $w;
}
my $w = $line_size - $t;
$out .= sprintf "p{%.1fcm}|\n\n", $w;
}
$out .= $header;
$table_header = 0;
$has_cols = 0;
$header = "";
@widths = ();
}
}
print $out;
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The name of the subsystem is "media", and not "linux_tv". Also,
as we plan to add other stuff there in the future, let's
rename also the media uAPI book to media_uapi, to make it
clearer.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
Mauro Carvalho Chehab
Mauro Carvalho Chehab
Sakari Ailus
Mauro Carvalho Chehab
Laurent Pinchart