aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/networking/devlink (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31Documentation: networking: correct possessive "its"Randy Dunlap1-1/+1
Change occurrences of "it's" that are possessive to "its" so that they don't read as "it is". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220829235414.17110-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller1-0/+36
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ice) This series contains updates to ice driver only. Marcin adds support for TC parsing on TTL and ToS fields. Anatolli adds support for devlink port split command to allow configuration of various port configurations. Jake allows for passing and writing an additional NVM write activate field by expanding current cmd_flag. Ani makes PHY debug output more readable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-24Documentation: devlink: fix the locking sectionJiri Pirko1-4/+2
As all callbacks are converted now, fix the text reflecting that change. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220823070213.1008956-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24ice: Implement devlink port split operationsAnatolii Gerasymenko1-0/+36
Allow to configure port split options using the devlink port split interface. Support port splitting only for port 0, as the FW has a predefined set of available port split options for the whole device. Add ice_devlink_port_options_print() function to print the table with all available FW port split options. It will be printed after each port split and unsplit command. Add documentation for devlink port split interface usage for the ice driver. Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-19Revert "Merge branch 'wwan-t7xx-fw-flashing-and-coredump-support'"Jakub Kicinski2-146/+0
This reverts commit 5417197dd516a8e115aa69f62a7b7554b0c3829c, reversing changes made to 0630f64d25a0f0a8c6a9ce9fde8750b3b561e6f5. Reverting to allow addressing review comments. Link: https://lore.kernel.org/all/4c5dbea0-52a9-1c3d-7547-00ea54c90550@linux.intel.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: wwan: t7xx: Devlink documentationM Chetan Kumar2-0/+146
Document the t7xx devlink commands usage for fw flashing & coredump collection. Refer to t7xx.rst file for details. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-01Documentation: devlink: add add devlink-selftests to the table of contentsBagas Sanjaya1-0/+1
Commit 08f588fa301bef ("devlink: introduce framework for selftests") adds documentation for devlink selftests framework, but it is missing from table of contents. Add it. Link: https://lore.kernel.org/linux-doc/202207300406.CUBuyN5i-lkp@intel.com/ Fixes: 08f588fa301bef ("devlink: introduce framework for selftests") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20220730022058.16813-1-bagasdotme@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28devlink: introduce framework for selftestsVikas Gupta1-0/+38
Add a framework for running selftests. Framework exposes devlink commands and test suite(s) to the user to execute and query the supported tests by the driver. Below are new entries in devlink_nl_ops devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported selftests by the drivers. devlink_nl_cmd_selftests_run: To execute selftests. Users can provide a test mask for executing group tests or standalone tests. Documentation/networking/devlink/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Expose device PSID over device infoJiri Pirko1-0/+3
Use tunneled MGIR to obtain PSID of line card device and extend device_info_get() op to fill up the info with that. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 fw.psid MT_0000000749 running: ini.version 4 fw 19.2010.1312 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Probe active line cards for devices and expose FW versionJiri Pirko1-0/+3
In case the line card is active, go over all possible existing devices (gearboxes) on it and expose FW version of the flashable one. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 running: ini.version 4 fw 19.2010.1312 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Expose HW revision and INI versionJiri Pirko1-0/+18
Implement info_get() to expose HW revision of a linecard and loaded INI version. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05Revert "Merge branch 'mlxsw-line-card-model'"Jakub Kicinski2-37/+0
This reverts commit 5e927a9f4b9f29d78a7c7d66ea717bb5c8bbad8e, reversing changes made to cfc1d91a7d78cf9de25b043d81efcc16966d55b3. The discussion is still ongoing so let's remove the uAPI until the discussion settles. Link: https://lore.kernel.org/all/20220425090021.32e9a98f@kernel.org/ Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220504154037.539442-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-25mlxsw: core_linecards: Expose device FW version over device infoJiri Pirko1-0/+15
Extend MDDQ to obtain FW version of line card device and implement device_info_get() op to fill up the info with that. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25mlxsw: core_linecards: Expose HW revision and INI versionJiri Pirko1-0/+18
Implement info_get() to expose HW revision of a linecard and loaded INI version. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card device info infrastructureJiri Pirko1-1/+1
Extend the line card info message with information (e.g., FW version) about devices found on the line card. Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 devices: device 0 versions: running: fw 19.2010.1310 device 1 versions: running: fw 19.2010.1310 device 2 versions: running: fw 19.2010.1310 device 3 versions: running: fw 19.2010.1310 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25devlink: introduce line card info get messageJiri Pirko1-0/+4
Allow the driver to provide per line card info get op to fill-up info, similar to the "devlink dev info". Example: $ devlink lc info pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card active stateJiri Pirko1-5/+6
Allow driver to mark a line card as active. Expose this state to the userspace over devlink netlink interface with proper notifications. 'active' state means that line card was plugged in after being provisioned. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-18devlink: implement line card provisioningJiri Pirko2-0/+122
In order to be able to configure all needed stuff on a port/netdevice of a line card without the line card being present, introduce line card provisioning. Basically by setting a type, provisioning process will start and driver is supposed to create a placeholder for instances (ports/netdevices) for a line card type. Allow the user to query the supported line card types over line card get command. Then implement two netlink command SET to allow user to set/unset the card type. On the driver API side, add provision/unprovision ops and supported types array to be advertised. Upon provision op call, the driver should take care of creating the instances for the particular line card type. Introduce provision_set/clear() functions to be called by the driver once the provisioning/unprovisioning is done on its side. These helpers are not to be called directly due to the async nature of provisioning. Example: $ devlink port # No ports are listed $ devlink lc pci/0000:01:00.0: lc 1 state unprovisioned supported_types: 16x100G lc 2 state unprovisioned supported_types: 16x100G lc 3 state unprovisioned supported_types: 16x100G lc 4 state unprovisioned supported_types: 16x100G lc 5 state unprovisioned supported_types: 16x100G lc 6 state unprovisioned supported_types: 16x100G lc 7 state unprovisioned supported_types: 16x100G lc 8 state unprovisioned supported_types: 16x100G $ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G $ devlink lc show pci/0000:01:00.0 lc 8 pci/0000:01:00.0: lc 8 state active type 16x100G supported_types: 16x100G $ devlink port pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4 pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4 pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4 pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4 pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4 pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4 pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4 pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4 pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4 pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4 pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4 pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4 pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4 pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4 pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4 pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4 $ devlink lc set pci/0000:01:00.0 lc 8 notype Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-16devlink: expose instance locking and add locked port registeringJakub Kicinski1-0/+16
It should be familiar and beneficial to expose devlink instance lock to the drivers. This way drivers can block devlink from calling them during critical sections without breakneck locking. Add port helpers, port splitting callbacks will be the first target. Use 'devl_' prefix for "explicitly locked" API. Initial RFC used '__devlink' but that's too much typing. devl_lock_is_held() is not defined without lockdep, which is the same behavior as lockdep_is_held() itself. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-06Documentation: devlink: mlx5.rst: Fix htmldoc build warningSaeed Mahameed1-0/+1
Fix the following build warning: Documentation/networking/devlink/mlx5.rst:13: WARNING: Error parsing content block for the "list-table" directive: +uniform two-level bullet list expected, but row 2 does not contain the same number of items as row 1 (2 vs 3). ... Add the missing item in the first row. Fixes: 0844fa5f7b89 ("net/mlx5: Let user configure io_eq_size param") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5: Let user configure max_macs generic paramShay Drory1-0/+3
Currently, max_macs is taking 70Kbytes of memory per function. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the number of max_macs. For example, to reduce the number of max_macs to 1, execute:: $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21devlink: Clarifies max_macs generic devlink paramShay Drory1-2/+4
The generic param max_macs documentation isn't clear. Replace it with a more descriptive documentation Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5: Let user configure event_eq_size paramShay Drory1-0/+3
Event EQ is an EQ which received the notification of almost all the events generated by the NIC. Currently, each event EQ is taking 512KB of memory. This size is not needed in most use cases, and is critical with large scale. Hence, allow user to configure the size of the event EQ. For example to reduce event EQ size to 64, execute:: $ devlink dev param set pci/0000:00:0b.0 name event_eq_size value 64 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21devlink: Add new "event_eq_size" generic device paramShay Drory1-0/+3
Add new device generic parameter to determine the size of the asynchronous control events EQ. For example, to reduce event EQ size to 64, execute: $ devlink dev param set pci/0000:06:00.0 \ name event_eq_size value 64 cmode driverinit $ devlink dev reload pci/0000:06:00.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5: Let user configure io_eq_size paramShay Drory1-0/+4
Currently, each I/O EQ is taking 128KB of memory. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the size of I/O EQs. For example, to reduce I/O EQ size to 64, execute: $ devlink dev param set pci/0000:00:0b.0 name io_eq_size value 64 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21devlink: Add new "io_eq_size" generic device paramShay Drory1-0/+3
Add new device generic parameter to determine the size of the I/O completion EQs. For example, to reduce I/O EQ size to 64, execute: $ devlink dev param set pci/0000:06:00.0 \ name io_eq_size value 64 cmode driverinit $ devlink dev reload pci/0000:06:00.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-15ice: support immediate firmware activation via devlink reloadJacob Keller1-2/+22
The ice hardware contains an embedded chip with firmware which can be updated using devlink flash. The firmware which runs on this chip is referred to as the Embedded Management Processor firmware (EMP firmware). Activating the new firmware image currently requires that the system be rebooted. This is not ideal as rebooting the system can cause unwanted downtime. In practical terms, activating the firmware does not always require a full system reboot. In many cases it is possible to activate the EMP firmware immediately. There are a couple of different scenarios to cover. * The EMP firmware itself can be reloaded by issuing a special update to the device called an Embedded Management Processor reset (EMP reset). This reset causes the device to reset and reload the EMP firmware. * PCI configuration changes are only reloaded after a cold PCIe reset. Unfortunately there is no generic way to trigger this for a PCIe device without a system reboot. When performing a flash update, firmware is capable of responding with some information about the specific update requirements. The driver updates the flash by programming a secondary inactive bank with the contents of the new image, and then issuing a command to request to switch the active bank starting from the next load. The response to the final command for updating the inactive NVM flash bank includes an indication of the minimum reset required to fully update the device. This can be one of the following: * A full power on is required * A cold PCIe reset is required * An EMP reset is required The response to the command to switch flash banks includes an indication of whether or not the firmware will allow an EMP reset request. For most updates, an EMP reset is sufficient to load the new EMP firmware without issues. In some cases, this reset is not sufficient because the PCI configuration space has changed. When this could cause incompatibility with the new EMP image, the firmware is capable of rejecting the EMP reset request. Add logic to ice_fw_update.c to handle the response data flash update AdminQ commands. For the reset level, issue a devlink status notification informing the user of how to complete the update with a simple suggestion like "Activate new firmware by rebooting the system". Cache the status of whether or not firmware will restrict the EMP reset for use in implementing devlink reload. Implement support for devlink reload with the "fw_activate" flag. This allows user space to request the firmware be activated immediately. For the .reload_down handler, we will issue a request for the EMP reset using the appropriate firmware AdminQ command. If we know that the firmware will not allow an EMP reset, simply exit with a suitable netlink extended ACK message indicating that the EMP reset is not available. For the .reload_up handler, simply wait until the driver has finished resetting. Logic to handle processing of an EMP reset already exists in the driver as part of its reset and rebuild flows. Implement support for the devlink reload interface with the "fw_activate" action. This allows userspace to request activation of firmware without a reboot. Note that support for indicating the required reset and EMP reset restriction is not supported on old versions of firmware. The driver can determine if the two features are supported by checking the device capabilities report. I confirmed support has existed since at least version 5.5.2 as reported by the 'fw.mgmt' version. Support to issue the EMP reset request has existed in all version of the EMP firmware for the ice hardware. Check the device capabilities report to determine whether or not the indications are reported by the running firmware. If the reset requirement indication is not supported, always assume a full power on is necessary. If the reset restriction capability is not supported, always assume the EMP reset is available. Users can verify if the EMP reset has activated the firmware by using the devlink info report to check that the 'running' firmware version has updated. For example a user might do the following: # Check current version $ devlink dev info # Update the device $ devlink dev flash pci/0000:af:00.0 file firmware.bin # Confirm stored version updated $ devlink dev info # Reload to activate new firmware $ devlink dev reload pci/0000:af:00.0 action fw_activate # Confirm running version updated $ devlink dev info Finally, this change does *not* implement basic driver-only reload support. I did look into trying to do this. However, it requires significant refactor of how the ice driver probes and loads everything. The ice driver probe and allocation flows were not designed with such a reload in mind. Refactoring the flow to support this is beyond the scope of this change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-11-22devlink: Add 'enable_iwarp' generic device paramShiraz Saleem1-0/+3
Add a new device generic parameter to enable and disable iWARP functionality on a multi-protocol RDMA device. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-29bnxt_en: Update bnxt.rst devlink documentationMichael Chan1-0/+2
Add 'enable_remote_dev_reset' documentation to bnxt.rst. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28devlink: add documentation for octeontx2 driverSubbaraya Sundeep2-0/+43
Add a file to document devlink support for octeontx2 driver. Driver-specific parameters implemented by AF, PF and VF drivers are documented. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net/mlx5: remove the recent devlink paramsJakub Kicinski1-20/+0
revert commit 46ae40b94d88 ("net/mlx5: Let user configure io_eq_size param") revert commit a6cb08daa3b4 ("net/mlx5: Let user configure event_eq_size param") revert commit 554604061979 ("net/mlx5: Let user configure max_macs param") The EQE parameters are applicable to more drivers, they should be configured via standard API, probably ethtool. Example of another driver needing something similar: https://lore.kernel.org/all/1633454136-14679-3-git-send-email-sbhatta@marvell.com/ The last param for "max_macs" is probably fine but the documentation is severely lacking. The meaning and implications for changing the param need to be stated. Link: https://lore.kernel.org/r/20211026152939.3125950-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net/mlx5: Let user configure max_macs paramShay Drory1-0/+4
Currently, max_macs is taking 70Kbytes of memory per function. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the number of max_macs. For example, to reduce the number of max_macs to 1, execute:: $ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \ cmode driverinit $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure event_eq_size paramShay Drory1-0/+4
Event EQ is an EQ which received the notification of almost all the events generated by the NIC. Currently, each event EQ is taking 512KB of memory. This size is not needed in most use cases, and is critical with large scale. Hence, allow user to configure the size of the event EQ. For example to reduce event EQ size to 64, execute:: $ devlink resource set pci/0000:00:0b.0 path /event_eq_size/ size 64 $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-25net/mlx5: Let user configure io_eq_size paramShay Drory1-0/+12
Currently, each I/O EQ is taking 128KB of memory. This size is not needed in all use cases, and is critical with large scale. Hence, allow user to configure the size of I/O EQs. For example, to reduce I/O EQ size to 64, execute: $ devlink resource set pci/0000:00:0b.0 path /io_eq_size/ size 64 $ devlink dev reload pci/0000:00:0b.0 Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+5
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ice: Print the api_patch as part of the fw.mgmt.apiBrett Creeley1-4/+5
Currently when a user uses "devlink dev info", the fw.mgmt.api will be the major.minor numbers as shown below: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7 <--- No patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 There are many features in the driver that depend on the major, minor, and patch version of the FW. Without the patch number in the output for fw.mgmt.api debugging issues related to the FW API version is difficult. Also, using major.minor.patch aligns with the existing firmware version which uses a 3 digit value. Fix this by making the fw.mgmt.api print the major.minor.patch versions. Shown below is the result: devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial_number 00-01-00-ff-ff-00-00-00 versions: fixed: board.id K91258-000 running: fw.mgmt 6.1.2 fw.mgmt.api 1.7.9 <--- patch number included fw.mgmt.build 0xd75e7d06 fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.app.name ICE OS Default Package fw.app 1.3.27.0 fw.app.bundle_id 0xc0000001 fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 stored: fw.mgmt.srev 5 fw.undi 1.2992.0 fw.undi.srev 5 fw.psid.api 3.10 fw.bundle_id 0x800085cc fw.netlist 3.10.2000-3.1e.0 fw.netlist.build 0x2a76e110 Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-02net: wwan: iosm: correct devlink extra paramsM Chetan Kumar1-26/+6
1. Removed driver specific extra params like download_region, address & region_count. The required information is passed as part of flash API. 2. IOSM Devlink documentation updated to reflect the same. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-01devlink: report maximum number of snapshots with regionsJacob Keller2-2/+6
Each region has an independently configurable number of maximum snapshots. This information is not reported to userspace, making it not very discoverable. Fix this by adding a new DEVLINK_ATTR_REGION_MAX_SNAPSHOST attribute which is used to report this maximum. Ex: $devlink region pci/0000:af:00.0/nvm-flash: size 10485760 snapshot [] max 1 pci/0000:af:00.0/device-caps: size 4096 snapshot [] max 10 pci/0000:af:00.1/nvm-flash: size 10485760 snapshot [] max 1 pci/0000:af:00.1/device-caps: size 4096 snapshot [] max 10 This information enables users to understand why a new region command may fail due to having too many existing snapshots. Reported-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: wwan: iosm: devlink fw flashing & cd collection documentationM Chetan Kumar2-0/+183
Documents devlink params, fw update & cd collection commands and its usage. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-22docs: devlink: remove the references to sja1105Vladimir Oltean2-50/+0
The sja1105 driver has removed its devlink params, so there is nothing to see here. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11devlink: Add new "enable_vnet" generic device paramParav Pandit1-0/+4
Add new device generic parameter to enable/disable creation of VDPA net auxiliary device and associated device functionality in the devlink instance. User who prefers to disable such functionality can disable it using below example. $ devlink dev param set pci/0000:06:00.0 \ name enable_vnet value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device for the VDPA net functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11devlink: Add new "enable_rdma" generic device paramParav Pandit1-0/+4
Add new device generic parameter to enable/disable creation of RDMA auxiliary device and associated device functionality in the devlink instance. User who prefers to disable such functionality can disable it using below example. $ devlink dev param set pci/0000:06:00.0 \ name enable_rdma value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device for the RDMA functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-11devlink: Add new "enable_eth" generic device paramParav Pandit1-0/+4
Add new device generic parameter to enable/disable creation of Ethernet auxiliary device and associated device functionality in the devlink instance. User who prefers to disable such functionality can disable it using below example. $ devlink dev param set pci/0000:06:00.0 \ name enable_eth value false cmode driverinit $ devlink dev reload pci/0000:06:00.0 At this point devlink instance do not create auxiliary device for the Ethernet functionality. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-26devlink: add documentation for hns3 driverHao Chen2-0/+26
Add a file to document devlink support for hns3 driver, now support devlink info and devlink reload. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-30Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds5-0/+204
Pull networking updates from Jakub Kicinski: "Core: - BPF: - add syscall program type and libbpf support for generating instructions and bindings for in-kernel BPF loaders (BPF loaders for BPF), this is a stepping stone for signed BPF programs - infrastructure to migrate TCP child sockets from one listener to another in the same reuseport group/map to improve flexibility of service hand-off/restart - add broadcast support to XDP redirect - allow bypass of the lockless qdisc to improving performance (for pktgen: +23% with one thread, +44% with 2 threads) - add a simpler version of "DO_ONCE()" which does not require jump labels, intended for slow-path usage - virtio/vsock: introduce SOCK_SEQPACKET support - add getsocketopt to retrieve netns cookie - ip: treat lowest address of a IPv4 subnet as ordinary unicast address allowing reclaiming of precious IPv4 addresses - ipv6: use prandom_u32() for ID generation - ip: add support for more flexible field selection for hashing across multi-path routes (w/ offload to mlxsw) - icmp: add support for extended RFC 8335 PROBE (ping) - seg6: add support for SRv6 End.DT46 behavior - mptcp: - DSS checksum support (RFC 8684) to detect middlebox meddling - support Connection-time 'C' flag - time stamping support - sctp: packetization Layer Path MTU Discovery (RFC 8899) - xfrm: speed up state addition with seq set - WiFi: - hidden AP discovery on 6 GHz and other HE 6 GHz improvements - aggregation handling improvements for some drivers - minstrel improvements for no-ack frames - deferred rate control for TXQs to improve reaction times - switch from round robin to virtual time-based airtime scheduler - add trace points: - tcp checksum errors - openvswitch - action execution, upcalls - socket errors via sk_error_report Device APIs: - devlink: add rate API for hierarchical control of max egress rate of virtual devices (VFs, SFs etc.) - don't require RCU read lock to be held around BPF hooks in NAPI context - page_pool: generic buffer recycling New hardware/drivers: - mobile: - iosm: PCIe Driver for Intel M.2 Modem - support for Qualcomm MSM8998 (ipa) - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU) - NXP SJA1110 Automotive Ethernet 10-port switch - Qualcomm QCA8327 switch support (qca8k) - Mikrotik 10/25G NIC (atl1c) Driver changes: - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP (our first foray into MAC/PHY description via ACPI) - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx - Mellanox/Nvidia NIC (mlx5) - NIC VF offload of L2 bridging - support IRQ distribution to Sub-functions - Marvell (prestera): - add flower and match all - devlink trap - link aggregation - Netronome (nfp): connection tracking offload - Intel 1GE (igc): add AF_XDP support - Marvell DPU (octeontx2): ingress ratelimit offload - Google vNIC (gve): new ring/descriptor format support - Qualcomm mobile (rmnet & ipa): inline checksum offload support - MediaTek WiFi (mt76) - mt7915 MSI support - mt7915 Tx status reporting - mt7915 thermal sensors support - mt7921 decapsulation offload - mt7921 enable runtime pm and deep sleep - Realtek WiFi (rtw88) - beacon filter support - Tx antenna path diversity support - firmware crash information via devcoredump - Qualcomm WiFi (wcn36xx) - Wake-on-WLAN support with magic packets and GTK rekeying - Micrel PHY (ksz886x/ksz8081): add cable test support" * tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits) tcp: change ICSK_CA_PRIV_SIZE definition tcp_yeah: check struct yeah size at compile time gve: DQO: Fix off by one in gve_rx_dqo() stmmac: intel: set PCI_D3hot in suspend stmmac: intel: Enable PHY WOL option in EHL net: stmmac: option to enable PHY WOL with PMT enabled net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del} net: use netdev_info in ndo_dflt_fdb_{add,del} ptp: Set lookup cookie when creating a PTP PPS source. net: sock: add trace for socket errors net: sock: introduce sk_error_report net: dsa: replay the local bridge FDB entries pointing to the bridge dev too net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev net: dsa: include fdb entries pointing to bridge in the host fdb list net: dsa: include bridge addresses which are local in the host fdb list net: dsa: sync static FDB entries on foreign interfaces to hardware net: dsa: install the host MDB and FDB entries in the master's RX filter net: dsa: reference count the FDB addresses at the cross-chip notifier level net: dsa: introduce a separate cross-chip notifier type for host FDBs net: dsa: reference count the MDB entries at the cross-chip notifier level ...
2021-06-17docs: networking: devlink: avoid using ReST :doc:`foo` markupMauro Carvalho Chehab2-3/+3
The :doc:`foo` tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:`foo`. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/4553858bc9a5442eba6d71caff8047e84ece4d9b.1623824363.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-06-17documentation: networking: devlink: fix prestera.rst formatting that causes build warningsOleksandr Mazur3-2/+4
Fixes: 66826c43e63d ("documentation: networking: devlink: add prestera switched driver Documentation") Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14documentation: networking: devlink: add prestera switched driver DocumentationOleksandr Mazur1-0/+141
Add documentation for the devlink feature prestera switchdev driver supports: add description for the support of the driver-specific devlink traps (include both traps with action TRAP and action DROP); Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02Documentation: devlink rate objectsDmytro Linkin2-0/+61
Add devlink rate objects section at devlink port documentation. Add devlink rate support info at netdevsim devlink documentation. Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.