aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/stih416.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-06-17ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6Peter Griffin1-4/+4
This patch fixes two problems: - 1) The device tree isn't currently providing sti-ethclk which is required by the dwmac glue code to correctly configure the ethernet PHY clock speed. This means depending on what the bootloader/jtag has configured this clock to, and what switch/hub the board is plugged into you most likely will NOT successfully negotiate a ethernet link. 2) The stmmaceth clock was associated with the wrong clock. It was referencing the PHY clock rather than the interconnect clock which clocks the IP. This patch also brings us closer to not having to boot the upstream kernel with the clk_ignore_unused parameter. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-05-21ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12Gabriel FERNANDEZ1-5/+5
Patch adds DT entries for clockgen A0/1/10/11/12 Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-05-21ARM: STi: DT: STiH41x: Rename CLK_SYSIN into clk_sysinGabriel FERNANDEZ1-5/+5
all-caps node name is not very usual. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-05-21ARM: STi: DT: add keyscan for stih416Gabriel FERNANDEZ1-0/+12
Add keyscan support for stih416. It is disabled by default given that it is not enabled on all boards. Also there are PIOs conflict with already claimed lines. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-03-27ARM: STi: stih416: Add support for the FSM Serial Flash ControllerLee Jones1-0/+12
Here we add the necessary device nodes required for successful device probing and Pinctrl setup for the FSM when booting on an STiH416 (Orly2). Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by Angus Clark <angus.clark@st.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-11ARM: STi: STIH416: Add IR support.Srinivas Kandagatla1-0/+12
This patch adds IRB support to STiH416 platforms. Tested on B2000 and B2020 development board Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-03-11ARM: STi: STiH416: Add ethernet support.Srinivas Kandagatla1-0/+44
This patch adds support to STiH416 SOC, which has two ethernet snps,dwmac controllers version 3.710. With this patch B2000 and B2020 boards can boot with ethernet in MII and RGMII modes. Tested on both B2020 and B2000. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-03-11ARM: STi: STiH416: Add soft reset controller support.Srinivas Kandagatla1-0/+5
This patch adds soft reset controller support for STiH415 and adds new softreset lines required for other device tree nodes in the header file. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2014-03-11ARM: STi: STiH416: Add reset controller support.Srinivas Kandagatla1-0/+6
This patch adds a reset controller node to the SOC device tree and also adds new header files with reset lines required for other device tree nodes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2013-12-04ARM: STi: Supply I2C configuration to STiH416 SoCMaxime COQUELIN1-0/+53
This patch supplies I2C configuration to STiH416 SoC. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
2013-07-22ARM: dts: STi: Fix pinconf setup for STiH416 serial2Srinivas Kandagatla1-1/+1
This patch fixes a bug in pinctrl setup of serial2 device, Some of the pins in the pinctrl node of serial2 do not belong to that pin-controller. This patch divides them in the pins into there respective pin controller nodes. Without this patch serial on StiH416-B2000 Board will not work as it fails with: "st-pinctrl pin-controller-rear.3: failed to get pin(99) name st-pinctrl pin-controller-rear.3: maps: function serial2 group serial2-0 num 4 pinconfig core: failed to register map default (3): no group/pin given" Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-25ARM: sti: Add STiH416 SOC supportSrinivas Kandagatla1-0/+96
The STiH416 is advanced HD AVC processor with 3D graphics acceleration and 1.2-GHz ARM Cortex-A9 SMP CPU. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.