aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/include (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-1/+30
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-14mach-ux500: basic HREFv60 support v2Linus Walleij1-1/+5
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add platform data for musbMian Yousaf Kaukab1-0/+25
USB resources and DMA40 configurations are dynamically with the data provided in ux500_add_usb() call. Though only DMA40 configurations differ between U8500 and U5500 (USB resource are common between them). Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-02-17ARM: P2V: separate PHYS_OFFSET from platform definitionsRussell King1-1/+1
This uncouple PHYS_OFFSET from the platform definitions, thereby facilitating run-time computation of the physical memory offset. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-10ux500: dynamic SOC detectionRabin Vincent3-49/+82
Dynamically detect the DBx500 SOC an revision based on the ASIC ID. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: rename MOP board KconfigRabin Vincent1-1/+1
Rename the MOP board Kconfig entries to the same name as the machine type, so that the machine_is_*() macros work correctly. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Updated to match changes in the tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: remove build-time changing macrosRabin Vincent4-66/+19
To allow the possiblity of building U8500 and U5500 support in the same image. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-06Merge branch 'devel-stable' into develRussell King13-118/+108
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2011-01-06Merge branch 'misc' into develRussell King1-3/+2
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2010-12-22ux500: rename modem IRQ and MBOX filesLinus Walleij1-0/+0
Suffix the U5500 modem IRQ and MBOX files with *-db5500* so that we clearly know the SoC they belong to, in line with the rest of the files in mach-ux500. Cc: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Cc: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-20ARM: SMP: remove smp_mpidr.hRussell King1-1/+0
With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we now do not use hard_smp_processor_id(), we no longer need to read the hardware processor ID. Remove the include providing this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-19mach-ux500: add STMPE1601 platform dataSundar Iyer1-1/+12
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> [Minor fixups to GPIO enumerators] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-14ARM: GIC: private a standard get_irqnr_preamble assembler macroRussell King1-0/+1
Provide a standard get_irqnr_preamble assembler macro for platforms to use, which retrieves the base address of the GIC CPU interface from gic_cpu_base_addr. Allow platforms to override this by defining HAVE_GET_IRQNR_PREAMBLE. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-09ux500: Add prcmu support for operating pointsMartin Persson3-6/+53
Adds support in PRCMU driver to handle CPU and APE operating points. Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: remove ambiguous irq macrosRabin Vincent1-44/+0
Remove the irq number macros which don't specify which SoC they're for. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework gpio registrationRabin Vincent2-38/+2
Rework gpio registration to remove build-time changing macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: fix uncompressor UART address for U5500Carl-Johan Irekvist1-9/+14
The uncompress code for zImage uses the UART to print status messages, this was hard coded to use UART2 for the U8500 platform. This patch checks at run time which platform it is run on. U5500 uses UART0 as console UART. Signed-off-by: Carl-Johan Irekvist <carl-johan.irekvist@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: Add DMA support for U5500Per Forlin2-0/+6
Add basic DMA configuration for u5500 supporting memcpy. Make way for SDI0 dma support by setting SDI0 to -1, indicating it will be configured in runtime. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: Add eMMC support in U5500.Per Forlin1-0/+3
U5500 now boots from sdi0 (onboard eMMC). Change machine type to U5500. Adjust uart and sdi0 clock rates for u5500. All necessary clocks must be enabled before Linux starts because there is no clock tree support in u5500 yet. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08mach-ux500: AB8500 irqs is taken from header fileMattias Wallin1-1/+2
This patch removes the dublicated define for number of interrupts and instead include the needed header file. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ARM: ux500: prcmu db8500 v2 supportMattias Wallin2-1/+3
This patch adds support for db8500 chip version 2. The TCDM memory address of the PRCMU is changed and dynamic detection of that is added. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework device registrationRabin Vincent2-18/+1
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: mop500: add TC35892 and MicroSD slot supportRabin Vincent1-1/+13
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-07ARM: 6479/1: Use shared GIC entry macros on UX500Magnus Damm1-66/+1
Use the GIC demux code in asm/hardware/entry-macro-gic.S on the UX500 subarchitecture. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-03ARM: SMP: pass an ipi number to smp_cross_call()Russell King1-2/+2
This allows us to use smp_cross_call() to trigger a number of different software generated interrupts, rather than combining them all on one SGI. Recover the SGI number via do_IPI. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-25Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-0/+1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-20arm: return both physical and virtual addresses from addruartJeremy Kerr1-5/+3
Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-18Merge branches 'at91', 'dcache', 'ftrace', 'hwbpt', 'misc', 'mmci', 's3c', 'st-ux' and 'unwind' into develRussell King11-14/+261
2010-10-13ux500 - add platform data for Nomadik SKE keypad controllerSundar Iyer1-0/+1
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-04ARM: Provide common header for hard_smp_processor_id()Russell King1-8/+1
Provide a common header to read the SMP CPU number from the MPIDR. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: 6415/1: ux500: DB5500 mailbox driverLinus Walleij1-0/+88
This is a driver for the mailboxes used to communicate with the DB5500 modem portions. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04ARM: 6413/1: ux500: resources for DB5500 mbox driver and modem irq handlerLinus Walleij3-1/+29
Platform resources found in the DB5500 for mailboxes and the modem IRQ controller. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-19ARM: 6337/2: AB8500 I2C platform configuration and irqLinus Walleij1-1/+1
This patch adds the platform part of the AB8500 PRCMU I2C access driver. The old irq name AB4500 is changed to AB8500. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6336/1: U8500 PRCMU driverLinus Walleij3-0/+107
Add an initial driver for communicating with the Power, Reset and Clock Management Unit (PRCMU) firmware in U8500. This initial version supports AB8500 communication only. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6334/1: ux500: add DB8500 SD/MMC platform devicesHanumath Prasad1-0/+7
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6331/1: ux500 cpu/SoC version macros v2Linus Walleij3-4/+28
This patch adds support for checking if the digital baseband (DB) System-on-Chip (aka "cpu) ASIC hardware version is 1.0, 1.1 or 2.0. We print the result in the bootlog, the functions are then used for runtime decisions based on hardware version. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-09Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds1-3/+3
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits) DMAENGINE: at_hdmac: locking fixlet DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l dma: dmatest: fix potential sign bug ioat2: catch and recover from broken vtd configurations v6 DMAENGINE: add runtime slave control to COH 901 318 v3 DMAENGINE: add runtime slave config to DMA40 v3 DMAENGINE: generic slave channel control v3 dmaengine: Driver for Topcliff PCH DMA controller intel_mid: Add Mrst & Mfld DMA Drivers drivers/dma: Eliminate a NULL pointer dereference dma/timb_dma: compile warning on 32 bit DMAENGINE: ste_dma40: support older silicon DMAENGINE: ste_dma40: support disabling physical channels DMAENGINE: ste_dma40: no disabled phy channels on ux500 DMAENGINE: ste_dma40: fix suspend bug DMAENGINE: ste_dma40: add DB8500 memcpy channels DMAENGINE: ste_dma40: no flow control on memcpy DMAENGINE: ste_dma40: arch updates for LCLA and LCPA DMAENGINE: ste_dma40: allocate LCLA dynamically DMAENGINE: ste_dma40: no premature stop ... Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c
2010-08-03Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds4-6/+220
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
2010-07-29ARM: 6275/1: ux500: don't use writeb() in uncompress.hRabin Vincent1-5/+5
Don't use writeb() in uncompress.h, to avoid the following build errors when the "Add barriers to the I/O accessors" series is applied. Use __raw_writeb() instead. arch/arm/boot/compressed/misc.o: In function `putc': arch/arm/mach-ux500/include/mach/uncompress.h:41: undefined reference to `outer_cache' Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27ARM: 6267/1: mop500: add AB8500 interrupt supportRabin Vincent2-0/+27
Add the platform data to enable AB8500 interrupt support. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500Rabin Vincent3-6/+193
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-22DMAENGINE: ste_dma40: support older siliconLinus Walleij1-0/+1
This makes sure the DMA40 driver will also work on the oldest silicon revisions that have the on-chip memory on another location in the DB8500 and also requires explicit suspend before starting or resuming a logical channel. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [added parenthesis to the definition of U8500_DMA_LCPA_BASE_ED] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: arch updates for LCLA and LCPAJonas Aaberg1-3/+2
This follows on the patch to allocate LCLA dynamically: the on-chip memory is needed for other things so now that that we're using it dynamically we can remove the LCLA resource altogether and free up some ESRAM memory. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-27DMAENGINE: DMA40 U8500 platform configurationLinus Walleij2-0/+15
This completes the DMA40 support with the platform-specific configuration for U8500/DB8500. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson_nomadik_linux@list.st.com Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [fixed up dma40_{tx|rx}_map declaration/initialization] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-04ARM: 6090/1: ux500: add U5500 supportRabin Vincent3-0/+12
Add basic support for the U5500 platform. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6088/1: ux500: use UX500_* macros instead of U8500_*Rabin Vincent1-1/+1
So that the correct addresses get used on U5500. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6087/1: ux500: move sys_timer to cpu.cRabin Vincent1-1/+1
Move the common system timer setup code to cpu.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6086/1: ux500: move gpio devices to devices-db8500.cRabin Vincent1-0/+2
The GPIO layout is different on DB5500, so move the current one to devices-db8500.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6085/1: ux500: reorganize i2c devicesRabin Vincent2-0/+8
Move common i2c devices to devices.c and DB8500-specific I2C devices to devices-db8500.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6084/1: ux500: move UART devices to devices.cRabin Vincent1-0/+3
The three PL011 UARTs are common among Ux500 SoCs, so move them to devices.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.