aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin/kernel/cplb-mpu (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-03-21blackfin: cplb-mpu: fix page mask table overflowBarry Song1-0/+2
page mask table will overflow without xip related macros. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2010-10-07Blackfin: Rename IRQ flags handling functionsDavid Howells1-4/+4
Rename h/w IRQ flags handling functions to be in line with what is expected for the irq renaming patch. This renames local_*_hw() to hard_local_*() using the following perl command: perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"` and then fixing up asm/irqflags.h manually. Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both return the flags rather than passing it through the argument list. Signed-off-by: David Howells <dhowells@redhat.com>
2010-08-06Blackfin: move MPU anomaly check to common locationMike Frysinger1-4/+0
Keep all anomaly/arch checks in one place to keep logic simple. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: respect the L1 kconfig optimization in the MPU codeBarry Song1-6/+12
Restore support for CONFIG_EXCPT_IRQ_SYSC_L1 in the MPU CPLB manager. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: initial XIP supportBarry Song1-0/+9
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: MPU: handle caches for reserved memorySonic Zhang1-1/+5
We weren't handling the user-specified cache behavior for the reserved memory regions (via mem=/max_mem=). The no-MPU code already takes care of this, so add support to the MPU code as well. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: fix MPU page permission masks overflow when dealing with async memoryBarry Song1-8/+22
Attempting to use the MPU while doing XIP out of parallel flash hooked up to the async memory bus would often result in random crashes as the MPU slowly corrupted memory. The fallout here is that the async banks gain MPU protection from user space too. So any accesses have to go through the mmap() interface rather than just using hardcoded pointers. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: MPU: add missing __init markingsMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: MPU: support XIP in async flash memoryBarry Song1-4/+9
The NOMPU code already supported executing in the async banks, so this brings the MPU code in line. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25Blackfin: fix cache Kconfig typoAndré Goddard Rosa1-1/+1
The Kconfig option is "BFIN_EXTMEM_WRITETHROUGH", not "..._WRITETROUGH". Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz2-32/+7
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: unify cache init functionsMike Frysinger2-72/+1
The CPLB implementations (mpu/nompu) had exact copies of the cacheinit code. Even the i/d cache functions are largely the same. So unify them both in the common kernel cache code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: use raw_smp_processor_id() in exception codeYi Li1-1/+1
When preempt debugging is enabled, smp_processor_id() may utilize the "current" structure. This may not be safe to access under all exceptions due to it being in dynamically allocated memory. So in exception code, make sure we use raw_smp_processor_id() instead to get at the real value directly. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: cleanup sync handling when enabling/disabling cplbsYi Li2-52/+15
The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper sync procedures as laid out in the Blackfin programming manual. So rather than audit/fix every call location, create helper functions that do the right things in order to safely update these MMRs. Then convert all call sites to use these new helper functions. While we're fixing the code, drop the workaround for anomaly 05000125 as that anomaly applies to old versions of silicon that we do not support. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: decouple unrelated cache settings to get exact behaviorJie Zhang2-17/+29
The current cache options don't really represent the hardware features. They end up setting different aspects of the hardware so that the end result is to turn on/off the cache. Unfortunately, when we hit cache problems with the hardware, it's difficult to test different settings to root cause the problem. The current settings also don't cleanly allow for different caching behaviors with different regions of memory. So split the configure options such that they properly reflect the settings that are applied to the hardware. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: rename bfin_addr_dcachable to bfin_addr_dcacheableJie Zhang1-1/+1
The latter naming convention is much more common. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: make sure MPU CPLB for first 1k is marked as validRobin Getz1-1/+1
This way we properly catch and kill applications that jump to a NULL ptr. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: work around anomaly 05000287Graf Yang1-1/+8
Make sure we work around anomaly 05000287 by configuring different port preferences for the data cache. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-04Blackfin arch: fix bug - traps test case 19 for exception 0x2d failsBernd Schmidt1-3/+1
Enable null pointer checking for ICPLBs. The code was there but for some reason I had commented it out at some stage during development. Should restrict this to 1K since atomic ops start there. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li1-4/+4
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Faster C implementation of no-MPU CPLB handlerBernd Schmidt3-2/+16
This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code. We ditch the old cplb-nompu implementation, which is a good example of why a good algorithm in a HLL is preferrable to a bad algorithm written in assembly. Rather than try to construct a table of all posible CPLBs and search it, we just create a (smaller) table of memory regions and their attributes. Some of the data structures are now unified for both the mpu and nompu cases. A lot of needless complexity in cplbinit.c is removed. Further optimizations: * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving these registers on the stack when entering a CPLB exception. * lose cli/nop/nop/sti sequences for some workarounds - these don't * make sense in an exception context Additional code unification should be possible after this. [Mike Frysinger <vapier.adi@gmail.com>: - convert CPP if statements to C if statements - remove redundant statements - use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten, we can punt it - add some BUG_ON() checks to make sure we dont overflow the small cplb_bounds array - add i/d cplb entries for the bootrom because there is functions/data in there we want to access - we do not need a NULL trailing entry as any time we access the bounds arrays, we use the nr_bounds variable ] Signed-off-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: smp patch cleanup from LKML reviewGraf Yang1-0/+1
1. Use inline get_l1_... functions instead of macro 2. Fix compile issue about smp barrier functions Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: unify cplbinfo filesMike Frysinger2-152/+0
Merge MPU and noMPU version of CPLB info code to one common version. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: SMP supporting patchset: Blackfin CPLB related codeGraf Yang4-88/+104
Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin CPLB related code Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16Blackfin arch: use the new bfin_addr_dcachable() functionMike Frysinger1-3/+2
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: Make L2 SRAM cacheableSonic Zhang1-0/+10
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Modify some funtion names to more genernal onesGraf Yang1-1/+1
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-07Blackfin arch: fixing bug - under IRQ stress, running applications may wrongly trigger an ICPLB miss and be killedBernd Schmidt1-2/+12
Disable IRQs while frobbing the CPLB registers, to avoid accessing the data in current_rwx_mask while it isn't covered by CPLBs. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: mark some functions as __init as they are only called from __init functionsMike Frysinger1-2/+2
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: lose unnecessary dependency on CONFIG_BFIN_ICACHE for MPUBernd Schmidt1-4/+0
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: add implicit icplb for the bootrom so we can use the utility functions in the kernelMike Frysinger1-2/+8
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: cplb-mpu code clean upMike Frysinger2-9/+5
- allow bootrom to be readable from supervisor mode - delete unused local variable "addr" - punt unused local defines of cplbinfo.c Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: add boot messages to quickly distinguish between MPU/NOMPU settingsMike Frysinger1-0/+2
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: support the reserved memory region in the MPU codeBernd Schmidt1-23/+41
Pointed-out-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: fix bug - a crash on bootup with CONFIG_MPU on the BF548Bernd Schmidt1-1/+1
The function flush_switched_dcplbs was clearing the CPLB entries covering the process permission bitmasks. This means that the sequence flush_switched_dcplbs (); set_mask_dcplbs(mm->context.page_rwx_mask); has a problem: if kernel code (such as an interrupt) causes a CPLB miss before set_mask_dcplbs completes, the CPLB handler function causes a double fault, with an instantaneous reboot. This bug fix is dedicated to Michael Hennerich, the only person in the world capable of providing working JTAG hardware. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: fix bug - Make the MPU code aware of the async banks and the uncached DMA area.Bernd Schmidt1-19/+27
Bug: CONFIG_MPU doesn't seem to handle access to ASYNC/IO Memory well http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3912 Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: fix up - CONFIG_BLKFIN_WT was renamed CONFIG_BFIN_WT while the MPU code was out-of-tree.Bernd Schmidt2-3/+3
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-02[Blackfin] arch: error out if ANOMALY_05000263 applies while enabling the MPUMike Frysinger1-0/+4
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Initial checkin of the memory protection support.Bernd Schmidt5-0/+643
Enable it with CONFIG_MPU. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.