aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin/kernel (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-10-29Blackfin arch: Fix random crash issue found by Michael.Robin Getz1-2/+4
This is fixes a problem where we could jump to the wrong address. By doing a "p0 = reti; jump (p0)". If a different, higher level interrupt came in, just before, rather than returning to the calling function, we would return to a random place in the kernel. This very elegant fix from Bernd grabs the return location off the stack, and places it into P0, so when we do a return, it goes to the correct place. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: fix bug: tell users if the kernel is recovering from a fault conditionRobin Getz1-2/+9
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: add support for checking/clearing overruns in generic purpose Timer APIMike Frysinger1-7/+40
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: cleanup arch/blackfin/kernel/traps.c handling code.Robin Getz1-139/+179
- move the CONFIG_KGDB into one block, for easier reading - remove printk from printk_address, and pass around buffers. Also print out the labels when decoding CPLB errors, so you know exactly where the error was. - Do not use fixed addresses, becuase people do not know where they come from. - Turn the printing level down on the dump, so if you don't want, only the signal prints out - just like on other archs. If a kernel/interrupt crashes, it should dump everything all the time Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: fix bug: kernel prints out error message twiceRobin Getz1-12/+18
This fixes two things: - stop calling write_lock_irq/write_unlock_irq which can turn modify irq levels - don't calling mmput when handing exceptions - since this might_sleep, which does a rti, and leaves us in kernel space (irq15, rather than irq5). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-24blackfin: fix sg falloutAdrian Bunk1-0/+1
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-22Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6Linus Torvalds1-2/+2
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: use KBUILD_CFLAGS and KBUILD_AFLAGS in Makefile Blackfin arch: Javier Herrer writes: fix building when icache and dcache is disabled
2007-10-22Update arch/ to use sg helpersJens Axboe1-2/+1
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22Blackfin arch: Javier Herrer writes: fix building when icache and dcache is disabledMike Frysinger1-2/+2
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-22Blackfin arch: dma add some API and cleanup bf54x DMA definitionBryan Wu1-0/+26
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: cleanup and promote the general purpose timers api to a core blackfin componentMike Frysinger2-0/+251
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: add functions for converting between sclks and usecsMike Frysinger1-1/+13
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storageMike Frysinger1-10/+10
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: Fixing Bug: balance calls to get_task_mm with corresponding mmput callsBernd Schmidt1-0/+2
We must balance calls to get_task_mm with corresponding mmput calls, otherwise refcounting is screwed up and mms don't get freed when their task exits. Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: Fix up /proc/cpuinfo so it is like everyone elseRobin Getz1-39/+61
Fix up /proc/cpuinfo so it is like everyone else, and gets parsed by various applications properly. Still needs some tweaking on parts without full L1 sram, like 532, 531, so it doesn't print out L1 bank info that doesn't exist. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: add new processor ADSP-BF52x arch/mach supportMichael Hennerich2-3/+34
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-16Consolidate PTRACE_DETACHAlexey Dobriyan1-6/+0
Identical handlers of PTRACE_DETACH go into ptrace_request(). Not touching compat code. Not touching archs that don't call ptrace_request. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on BlackfinBernd Schmidt1-1/+2
Fix a problem reported in the forums - libstdc++ can call writev with an iovec containing { NULL, 0 }, which works fine on i686-linux, but fails on Blackfin. Fixed by allowing size 0 transfers to/from userspace regardless of the address. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: Export strcpy - occasionally get module link failures otherwiseBernd Schmidt1-0/+1
Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopyMichael Hennerich1-9/+30
- flush/inv the correct range - dmacopy test failed when policy is write_back - invalidate before dma http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3367 It's the cache invalidate what is causing the issue. There is no invalidate only instruction it's always: FLUSHINV So when we "invalidate" after the DMA we might (do) overwrite freshly dma'ed data by dirty Cache WB content. Fixed by moving the "invalidate" at the beginning of dma_memcpy. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323Michael Hennerich1-70/+107
Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 accoring to BF533 anomaly sheet Rev. A 09/04/07 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Print out debug info, as early as possibleRobin Getz1-4/+57
Print out debug info, as early as possible - even before the kernel initializes the interrupt vectors. Now we can print out debug messages almost anytime during the boot process. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print outRobin Getz2-21/+25
Also ensure that the traps_c code doesn't cause a double fault, by sending a signal to a faulting kernel before the memory subsystem is fully initialized, by printing out the error message before sending the signal. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: fix endless loop bug when a double fault happensRobin Getz1-0/+8
Today when a double fault happens (exception during an exception handling event), we go into an endless loop, with nothing comming out the UART. With this patch, we actually see that we have commited a double fault event Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Initial patch to add earlyprintk supportRobin Getz2-0/+162
This allows debugging of problems which happen eary in the kernel boot process (after bootargs are parsed, but before serial subsystem is fully initialized) Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archsBryan Wu1-6/+6
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: add more common defines for output sectionsMike Frysinger1-0/+6
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-12Blackfin arch: cleanup IO and DMA_IO API function definitions according to other archesBryan Wu1-3/+3
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-09-12Blackfin arch: fix typo pointed out by David Rowe (Mhz -> MHz)Mike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: Workaround reboot bug, issue SSYNC at the start of bfin_resetMichael Hennerich1-0/+78
reboot failes on BF533 http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3500 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: a few things still use bfin_read_PORT_FER()Michael Hennerich1-0/+15
- Update gpio_request to allow multiple request with the same signature (label) - Use generic GPIO API where applicable - Update generic board support form stamp board Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work that well with DEBUG_KERNEL_STARTRobin Getz1-5/+0
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-28Blackfin arch: Merge GPIO/Peripheral Resource Allocation back into a single fileMichael Hennerich2-14/+215
Signed-off-by: Michael Hennerich <michale.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: extract gpio number from PIN functionMichael Hennerich1-2/+4
Singed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: rewrite our reboot code in CMike Frysinger3-26/+19
rewrite our reboot code in C rather than assembly to be like other architectures and to allow board maintainers to define custom behavior Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: vmlinux.lds.S, break up our .init into separate sectionsMike Frysinger1-15/+27
Break up our .init into separate section like all other ports do and so that we dont mix text and data (causes disassembly headaches as pointed out by Robin) Cc: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: parse input sections properly when using -ffunction-sections/-fdata-sectionsMike Frysinger1-1/+3
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: add an exception request/free apiMike Frysinger1-2/+36
add an exception request/free api similar to the interrupt request/fre api so people can utilize the free software based exceptions for their own purposes Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: allow people to select the feature that is unavailable to the kernelMike Frysinger1-2/+1
- allow people to select the feature that is unavailable to the kernel: NMI, JTAG, or CYCLES. - change default NMI handler to simply dump hardware trace buffer. - remove default NMI handler completely as calling into kernel code is not safe move example handler to wiki so people dont haphazardly copy and paste this stuff thinking its safe Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: Allow ptrace access the fixed code.Jie Zhang1-6/+18
Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: Add DMA API to set curr descriptor addressSonic Zhang1-1/+14
This API is necessary for DMA descriptor array mode. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: remove spurious KERN_EMERG log level in outputMike Frysinger1-2/+1
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: to do some consolidation of common code and common name spacesRobin Getz4-19/+22
now all BLKFIN should be BFIN, should be no functional changes. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03Blackfin arch: Add option to priorize DMA over CoreMichael Hennerich1-0/+5
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: add set_dma_curr_addr DMA API to support sound driver recording functionRoy Huang1-0/+10
Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: Add ability to expend the hardware trace bufferRobin Getz2-7/+55
Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03Blackfin arch: Some cosmetics based on LKML feedback from Joe PerchesMichael Hennerich1-36/+66
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24Blackfin arch: add missing gpio error handling to make sure we roll back requests in case one failsMichael Hennerich1-2/+8
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: revise anomaly handling by basing things on the compiler not the kconfig definesMike Frysinger3-17/+17
revise anomaly handling by basing things on the compiler not the kconfig defines, so the header is stable and usable outside of the kernel. This also allows us to move some code from preprocessing to compiling (gcc culls dead code) which should help with code quality (readability, catch minor bugs, etc...). Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-04Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver reported by Kalle Pokki <kalle.pokki@iki.fi>Michael Hennerich1-8/+11
Cc: Kalle Pokki <kalle.pokki@iki.fi> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.