aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-10-06x86/PCI: use host bridge _CRS info on ASUS M2V-MX SEPaul Menzel1-0/+11
In summary, this DMI quirk uses the _CRS info by default for the ASUS M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN") whose commit message should be read for further information. Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res") Linux gives the following oops: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:20:01.0: setting latency timer to 64 BUG: unable to handle kernel paging request at ffffc90011c08000 IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173 Oops: 0009 [#1] SMP last sysfs file: /sys/module/snd_pcm/initstate CPU 0 Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan] Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name RIP: 0010:[<ffffffffa0578402>] [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP: 0018:ffff88013153fe50 EFLAGS: 00010286 RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090 FS: 0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0) Stack: 0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400 ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8 ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232 Call Trace: [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186 [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92 [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b [<ffffffff8105fd3f>] ? kthread+0x7a/0x82 [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10 [<ffffffff8105fcc5>] ? kthread+0x0/0x82 [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10 Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be RIP [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP <ffff88013153fe50> CR2: ffffc90011c08000 ---[ end trace 8d1f3ebc136437fd ]--- Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem. $ dmesg | grep -i crs # with the quirk PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug The match has to be against the DMI board entries though since the vendor entries are not populated. DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304 10/30/2007 This quirk should be removed when `pci=use_crs` is enabled for machines from 2006 or earlier or some other solution is implemented. Using coreboot [1] with this board the problem does not exist but this quirk also does not affect it either. To be safe though the check is tightened to only take effect when the BIOS from American Megatrends is used. 15:13 < ruik> but coreboot does not need that 15:13 < ruik> because i have there only one root bus 15:13 < ruik> the audio is behind a bridge $ sudo dmidecode BIOS Information Vendor: American Megatrends Inc. Version: 0304 Release Date: 10/30/2007 [1] http://www.coreboot.org/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552 Cc: stable@kernel.org (2.6.34) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-01Merge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tipLinus Torvalds2-11/+21
* 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: irq: Fix check for already initialized irq_domain in irq_domain_add irq: Add declaration of irq_domain_simple_ops to irqdomain.h * 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86/rtc: Don't recursively acquire rtc_lock * 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: posix-cpu-timers: Cure SMP wobbles sched: Fix up wchan borkage sched/rt: Migrate equal priority tasks to available CPUs
2011-09-25KVM: x86 emulator: fix Src2CL decodeAvi Kivity1-1/+1
Src2CL decode (used for double width shifts) erronously decodes only bit 3 of %rcx, instead of bits 7:0. Fix by decoding %cl in its entirety. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-09-25KVM: MMU: fix incorrect return of spteZhao Jin1-1/+2
__update_clear_spte_slow should return original spte while the current code returns low half of original spte combined with high half of new spte. Signed-off-by: Zhao Jin <cronozhj@gmail.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-09-21x86/rtc: Don't recursively acquire rtc_lockMatt Fleming2-11/+21
A deadlock was introduced on x86 in commit ef68c8f87ed1 ("x86: Serialize EFI time accesses on rtc_lock") because efi_get_time() and friends can be called with rtc_lock already held by read_persistent_time(), e.g.: timekeeping_init() read_persistent_clock() <-- acquire rtc_lock efi_get_time() phys_efi_get_time() <-- acquire rtc_lock <DEADLOCK> To fix this let's push the locking down into the get_wallclock() and set_wallclock() implementations. Only the clock implementations that access the x86 RTC directly need to acquire rtc_lock, so it makes sense to push the locking down into the rtc, vrtc and efi code. The virtualization implementations don't require rtc_lock to be held because they provide their own serialization. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Acked-by: Jan Beulich <jbeulich@novell.com> Acked-by: Avi Kivity <avi@redhat.com> [for the virtualization aspect] Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-16Merge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xenLinus Torvalds3-9/+8
* 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen: xen/i386: follow-up to "replace order-based range checking of M2P table by linear one" xen/irq: Alter the locking to use a mutex instead of a spinlock. xen/e820: if there is no dom0_mem=, don't tweak extra_pages. xen: disable PV spinlocks on HVM
2011-09-15asm alternatives: remove incorrect alignment notesLinus Torvalds3-7/+0
On x86-64, they were just wasteful: with the explicitly added (now unnecessary) padding, the size of the alternatives structure was 16 bytes, and an alignment of 8 bytes didn't hurt much. However, it was still silly, since the natural size and alignment for the structure is actually just 12 bytes, 4-byte aligned since commit 59e97e4d6fbc ("x86: Make alternative instruction pointers relative"). So removing the padding, and removing the extra alignment is just a good idea. On x86-32, the alignment of 4 bytes was correct, but was incorrectly hardcoded as 8 bytes in <asm/alternative-asm.h>. That header file had used to be an x86-64 only header file, but various unification efforts have made it be used for x86-32 too (ie the unification of rwlock and rwsem). That in turn caused x86-32 boot failures, because the extra alignment would result in random zero-filled words in the altinstructions section, causing oopses early at boot when doing alternative instruction replacement. So just remove all the alignment noise entirely. It's wrong, and it's unnecessary. The section itself is already properly aligned by the linker scripts, and all additions to the section had better be of the proper 12-byte format, keeping it aligned. So if the align directive were to ever make a difference, that would be an indication of a serious bug to begin with. Reported-by: Werner Landgraf <w.landgraf@ru.r> Acked-by: Andrew Lutomirski <luto@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15xen/i386: follow-up to "replace order-based range checking of M2P table by linear one"Jan Beulich1-4/+2
The numbers obtained from the hypervisor really can't ever lead to an overflow here, only the original calculation going through the order of the range could have. This avoids the (as Jeremy points outs) somewhat ugly NULL-based calculation here. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-13xen/e820: if there is no dom0_mem=, don't tweak extra_pages.David Vrabel1-4/+6
The patch "xen: use maximum reservation to limit amount of usable RAM" (d312ae878b6aed3912e1acaaf5d0b2a9d08a4f11) breaks machines that do not use 'dom0_mem=' argument with: reserve RAM buffer: 000000133f2e2000 - 000000133fffffff (XEN) mm.c:4976:d0 Global bit is set to kernel page fffff8117e (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: ... The reason being that the last E820 entry is created using the 'extra_pages' (which is based on how many pages have been freed). The mentioned git commit sets the initial value of 'extra_pages' using a hypercall which returns the number of pages (if dom0_mem has been used) or -1 otherwise. If the later we return with MAX_DOMAIN_PAGES as basis for calculation: return min(max_pages, MAX_DOMAIN_PAGES); and use it: extra_limit = xen_get_max_pages(); if (extra_limit >= max_pfn) extra_pages = extra_limit - max_pfn; else extra_pages = 0; which means we end up with extra_pages = 128GB in PFNs (33554432) - 8GB in PFNs (2097152, on this specific box, can be larger or smaller), and then we add that value to the E820 making it: Xen: 00000000ff000000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000133f2e2000 (usable) which is clearly wrong. It should look as so: Xen: 00000000ff000000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000027fbda000 (usable) Naturally this problem does not present itself if dom0_mem=max:X is used. CC: stable@kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-12Merge branch 'upstream/bugfix' of git://github.com/jsgf/linux-xenLinus Torvalds1-2/+3
* 'upstream/bugfix' of git://github.com/jsgf/linux-xen: xen: use non-tracing preempt in xen_clocksource_read()
2011-09-09Fix pointer dereference before call to pcie_bus_configure_settingsShyam Iyer1-2/+7
Commit b03e7495a862 ("PCI: Set PCI-E Max Payload Size on fabric") introduced a potential NULL pointer dereference in calls to pcie_bus_configure_settings due to attempts to access pci_bus self variables when the self pointer is NULL. To correct this, verify that the self pointer in pci_bus is non-NULL before dereferencing it. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-08xen: disable PV spinlocks on HVMStefano Stabellini1-1/+0
PV spinlocks cannot possibly work with the current code because they are enabled after pvops patching has already been done, and because PV spinlocks use a different data structure than native spinlocks so we cannot switch between them dynamically. A spinlock that has been taken once by the native code (__ticket_spin_lock) cannot be taken by __xen_spin_lock even after it has been released. Reported-and-Tested-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-07Merge branch 'perf-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tipLinus Torvalds1-0/+3
* 'perf-fixes-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86, perf: Check that current->mm is alive before getting user callchain perf_event: Fix broken calc_timer_values() perf events: Fix slow and broken cgroup context switch code
2011-09-07Merge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xenLinus Torvalds3-3/+34
* 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen: xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead. xen: x86_32: do not enable iterrupts when returning from exception in interrupt context xen: use maximum reservation to limit amount of usable RAM
2011-09-07Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvmLinus Torvalds1-1/+1
* 'kvm-updates/3.1' of git://github.com/avikivity/kvm: KVM: Fix instruction size issue in pvclock scaling
2011-09-01xen/smp: Warn user why they keel over - nosmp or noapic and what to use instead.Konrad Rzeszutek Wilk1-0/+10
We have hit a couple of customer bugs where they would like to use those parameters to run an UP kernel - but both of those options turn of important sources of interrupt information so we end up not being able to boot. The correct way is to pass in 'dom0_max_vcpus=1' on the Xen hypervisor line and the kernel will patch itself to be a UP kernel. Fixes bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637308 CC: stable@kernel.org Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-01xen: x86_32: do not enable iterrupts when returning from exception in interrupt contextIgor Mammedov1-3/+5
If vmalloc page_fault happens inside of interrupt handler with interrupts disabled then on exit path from exception handler when there is no pending interrupts, the following code (arch/x86/xen/xen-asm_32.S:112): cmpw $0x0001, XEN_vcpu_info_pending(%eax) sete XEN_vcpu_info_mask(%eax) will enable interrupts even if they has been previously disabled according to eflags from the bounce frame (arch/x86/xen/xen-asm_32.S:99) testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp) setz XEN_vcpu_info_mask(%eax) Solution is in setting XEN_vcpu_info_mask only when it should be set according to cmpw $0x0001, XEN_vcpu_info_pending(%eax) but not clearing it if there isn't any pending events. Reproducer for bug is attached to RHBZ 707552 CC: stable@kernel.org Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-01xen: use maximum reservation to limit amount of usable RAMDavid Vrabel1-0/+19
Use the domain's maximum reservation to limit the amount of extra RAM for the memory balloon. This reduces the size of the pages tables and the amount of reserved low memory (which defaults to about 1/32 of the total RAM). On a system with 8 GiB of RAM with the domain limited to 1 GiB the kernel reports: Before: Memory: 627792k/4472000k available After: Memory: 549740k/11132224k available A increase of about 76 MiB (~1.5% of the unused 7 GiB). The reserved low memory is also reduced from 253 MiB to 32 MiB. The total additional usable RAM is 329 MiB. For dom0, this requires at patch to Xen ('x86: use 'dom0_mem' to limit the number of pages for dom0') (c/s 23790) CC: stable@kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-31x86, perf: Check that current->mm is alive before getting user callchainAndrey Vagin1-0/+3
An event may occur when an mm is already released. I added an event in dequeue_entity() and caught a panic with the following backtrace: [ 434.421110] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 434.421258] IP: [<ffffffff810464ac>] __get_user_pages_fast+0x9c/0x120 ... [ 434.421258] Call Trace: [ 434.421258] [<ffffffff8101ae81>] copy_from_user_nmi+0x51/0xf0 [ 434.421258] [<ffffffff8109a0d5>] ? sched_clock_local+0x25/0x90 [ 434.421258] [<ffffffff8101b048>] perf_callchain_user+0x128/0x170 [ 434.421258] [<ffffffff811154cd>] ? __perf_event_header__init_id+0xed/0x100 [ 434.421258] [<ffffffff81116690>] perf_prepare_sample+0x200/0x280 [ 434.421258] [<ffffffff81118da8>] __perf_event_overflow+0x1b8/0x290 [ 434.421258] [<ffffffff81065240>] ? tg_shares_up+0x0/0x670 [ 434.421258] [<ffffffff8104fe1a>] ? walk_tg_tree+0x6a/0xb0 [ 434.421258] [<ffffffff81118f44>] perf_swevent_overflow+0xc4/0xf0 [ 434.421258] [<ffffffff81119150>] do_perf_sw_event+0x1e0/0x250 [ 434.421258] [<ffffffff81119204>] perf_tp_event+0x44/0x70 [ 434.421258] [<ffffffff8105701f>] ftrace_profile_sched_block+0xdf/0x110 [ 434.421258] [<ffffffff8106121d>] dequeue_entity+0x2ad/0x2d0 [ 434.421258] [<ffffffff810614ec>] dequeue_task_fair+0x1c/0x60 [ 434.421258] [<ffffffff8105818a>] dequeue_task+0x9a/0xb0 [ 434.421258] [<ffffffff810581e2>] deactivate_task+0x42/0xe0 [ 434.421258] [<ffffffff814bc019>] thread_return+0x191/0x808 [ 434.421258] [<ffffffff81098a44>] ? switch_task_namespaces+0x24/0x60 [ 434.421258] [<ffffffff8106f4c4>] do_exit+0x464/0x910 [ 434.421258] [<ffffffff8106f9c8>] do_group_exit+0x58/0xd0 [ 434.421258] [<ffffffff8106fa57>] sys_exit_group+0x17/0x20 [ 434.421258] [<ffffffff8100b202>] system_call_fastpath+0x16/0x1b Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1314693156-24131-1-git-send-email-avagin@openvz.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-30KVM: Fix instruction size issue in pvclock scalingDuncan Sands1-1/+1
Commit de2d1a524e94 ("KVM: Fix register corruption in pvclock_scale_delta") introduced a mul instruction that may have only a memory operand; the assembler therefore cannot select the correct size: pvclock.s:229: Error: no instruction mnemonic suffix given and no register operands; can't size instruction In this example the assembler is: #APP mul -48(%rbp) ; shrd $32, %rdx, %rax #NO_APP A simple solution is to use mulq. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-26All Arch: remove linkage for sys_nfsservctl system callNeilBrown3-3/+3
The nfsservctl system call is now gone, so we should remove all linkage for it. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-26sfi: table irq 0xFF means 'no interrupt'Kirill A. Shutemov1-1/+3
According to the SFI specification irq number 0xFF means device has no interrupt or interrupt attached via GPIO. Currently, we don't handle this special case and set irq field in *_board_info structs to 255. It leads to confusion in some drivers. Accelerometer driver tries to register interrupt 255, fails and prints "Cannot get IRQ" to dmesg. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25x86-32: Fix boot with CONFIG_X86_INVD_BUGAndy Lutomirski1-6/+2
entry_32.S contained a hardcoded alternative instruction entry, and the format changed in commit 59e97e4d6fbc ("x86: Make alternative instruction pointers relative"). Replace the hardcoded entry with the altinstruction_entry macro. This fixes the 32-bit boot with CONFIG_X86_INVD_BUG=y. Reported-and-tested-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Andy Lutomirski <luto@mit.edu> Cc: Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25mtrr: fix UP breakage caused during switch to stop_machineTejun Heo1-2/+0
While removing custom rendezvous code and switching to stop_machine, commit 192d8857427d ("x86, mtrr: use stop_machine APIs for doing MTRR rendezvous") completely dropped mtrr setting code on !CONFIG_SMP breaking MTRR settting on UP. Fix it by removing the incorrect CONFIG_SMP. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Anders Eriksson <aeriksson@fastmail.fm> Tested-and-acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-24xen: use non-tracing preempt in xen_clocksource_read()Jeremy Fitzhardinge1-2/+3
The tracing code used sched_clock() to get tracing timestamps, which ends up calling xen_clocksource_read(). xen_clocksource_read() must disable preemption, but if preemption tracing is enabled, this results in infinite recursion. I've only noticed this when boot-time tracing tests are enabled, but it seems like a generic bug. It looks like it would also affect kvm_clocksource_read(). Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com>
2011-08-23Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds3-4/+3
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, vdso: On system call restart after SYSENTER, use int $0x80 x86, UV: Remove UV delay in starting slave cpus x86, olpc: Wait for last byte of EC command to be accepted
2011-08-23x86-32, vdso: On system call restart after SYSENTER, use int $0x80H. Peter Anvin1-1/+1
When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle the arguments to match the int $0x80 calling convention. This was probably a design mistake, but it's what it is now. This causes errors if the system call as to be restarted. For SYSENTER, we have to invoke the instruction from the vdso as the return address is hardcoded. Accordingly, we can simply replace the jump in the vdso with an int $0x80 instruction and use the slower entry point for a post-restart. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com Cc: <stable@kernel.org>
2011-08-22Merge branch 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds5-11/+15
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
2011-08-22xen/tracing: Fix tracing config option properlyJeremy Fitzhardinge1-1/+1
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen: Do not enable PV IPIs when vector callback not presentStefano Stabellini1-2/+2
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-19Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds1-0/+9
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: OF: Don't crash when bridge parent is NULL. PCI: export pcie_bus_configure_settings symbol PCI: code and comments cleanup PCI: make cardbus-bridge resources optional PCI: make SRIOV resources optional PCI : ability to relocate assigned pci-resources PCI: honor child buses add_size in hot plug configuration PCI: Set PCI-E Max Payload Size on fabric
2011-08-17xen/x86: replace order-based range checking of M2P table by linear oneJan Beulich3-8/+12
The order-based approach is not only less efficient (requiring a shift and a compare, typical generated code looking like this mov eax, [machine_to_phys_order] mov ecx, eax shr ebx, cl test ebx, ebx jnz ... whereas a direct check requires just a compare, like in cmp ebx, [machine_to_phys_nr] jae ... ), but also slightly dangerous in the 32-on-64 case - the element address calculation can wrap if the next power of two boundary is sufficiently far away from the actual upper limit of the table, and hence can result in user space addresses being accessed (with it being unknown what may actually be mapped there). Additionally, the elimination of the mistaken use of fls() here (should have been __fls()) fixes a latent issue on x86-64 that would trigger if the code was run on a system with memory extending beyond the 44-bit boundary. CC: stable@kernel.org Signed-off-by: Jan Beulich <jbeulich@novell.com> [v1: Based on Jeremy's feedback] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-16Merge branch 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+3
* 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: uses TASKSTATS, depends on NET KVM: fix TASK_DELAY_ACCT kconfig warning
2011-08-16KVM: uses TASKSTATS, depends on NETRandy Dunlap1-0/+2
CONFIG_TASKSTATS just had a change to use netlink, including a change to "depends on NET". Since "select" does not follow dependencies, KVM also needs to depend on NET to prevent build errors when CONFIG_NET is not enabled. Sample of the reported "undefined reference" build errors: taskstats.c:(.text+0x8f686): undefined reference to `nla_put' taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve' taskstats.c:(.text+0x8f8fb): undefined reference to `init_net' taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast' taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb' taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone' taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb' taskstats.c:(.text+0x901e9): undefined reference to `skb_put' taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family' taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops' taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops' taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-08-15x86: fix mm/fault.c buildRandy Dunlap1-0/+1
arch/x86/mm/fault.c needs to include asm/vsyscall.h to fix a build error: arch/x86/mm/fault.c: In function '__bad_area_nosemaphore': arch/x86/mm/fault.c:728: error: 'VSYSCALL_START' undeclared (first use in this function) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-12Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tipLinus Torvalds20-115/+173
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip: x86-64: Rework vsyscall emulation and add vsyscall= parameter x86-64: Wire up getcpu syscall x86: Remove unnecessary compile flag tweaks for vsyscall code x86-64: Add vsyscall:emulate_vsyscall trace event x86-64: Add user_64bit_mode paravirt op x86-64, xen: Enable the vvar mapping x86-64: Work around gold bug 13023 x86-64: Move the "user" vsyscall segment out of the data segment. x86-64: Pad vDSO to a page boundary
2011-08-11Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds1-0/+1
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf symbols: Check '/tmp/perf-' symbol file ownership perf sched: Usage leftover from trace -> script rename perf sched: Do not delete session object prematurely perf tools: Check $HOME/.perfconfig ownership perf, x86: Add model 45 SandyBridge support perf tools: Add support to install perf python extension perf tools: do not look at ./config for configuration perf tools: Make clean leaves some files perf lock: Dropping unsupported ':r' modifier perf probe: Fix coredump introduced by probe module option jump label: Reduce the cycle count by changing the link order perf report: Use ui__warning in some more places perf python: Add PERF_RECORD_{LOST,READ,SAMPLE} routine tables perf evlist: Introduce 'disable' method trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED perf buildid-cache: Zero out buffer of filenames when adding/removing buildid
2011-08-10x86-64: Rework vsyscall emulation and add vsyscall= parameterAndy Lutomirski9-89/+90
There are three choices: vsyscall=native: Vsyscalls are native code that issues the corresponding syscalls. vsyscall=emulate (default): Vsyscalls are emulated by instruction fault traps, tested in the bad_area path. The actual contents of the vsyscall page is the same as the vsyscall=native case except that it's marked NX. This way programs that make assumptions about what the code in the page does will not be confused when they read that code. vsyscall=none: Trying to execute a vsyscall will segfault. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10x86-64: Wire up getcpu syscallAndy Lutomirski1-0/+2
getcpu is available as a vdso entry and an emulated vsyscall. Programs that for some reason don't want to use the vdso should still be able to call getcpu without relying on the slow emulated vsyscall. It costs almost nothing to expose it as a real syscall. We also need this for the following patch in vsyscall=native mode. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/6b19f55bdb06a0c32c2fa6dba9b6f222e1fde999.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10x86: Remove unnecessary compile flag tweaks for vsyscall codeAndy Lutomirski2-16/+0
As of commit 98d0ac38ca7b1b7a552c9a2359174ff84decb600 Author: Andy Lutomirski <luto@mit.edu> Date: Thu Jul 14 06:47:22 2011 -0400 x86-64: Move vread_tsc and vread_hpet into the vDSO user code no longer directly calls into code in arch/x86/kernel/, so we don't need compile flag hacks to make it safe. All vdso code is in the vdso directory now. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/835cd05a4c7740544d09723d6ba48f4406f9826c.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-09perf, x86: Add model 45 SandyBridge supportYouquan Song1-0/+1
Add support to Romely-EP SandyBridge. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Anhua Xu <anhua.xu@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1312264895-2010-1-git-send-email-youquan.song@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-06Merge branch 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds3-7/+6
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set xen: Fix misleading WARN message at xen_release_chunk xen: Fix printk() format in xen/setup.c xen/tracing: it looks like we wanted CONFIG_FTRACE xen/self-balloon: Add dependency on tmem. xen/balloon: Fix compile errors - missing header files. xen/grant: Fix compile warning. xen/pciback: remove duplicated #include
2011-08-05x86, UV: Remove UV delay in starting slave cpusJack Steiner1-1/+0
Delete the 10 msec delay between the INIT and SIPI when starting slave cpus. I can find no requirement for this delay. BIOS also has similar code sequences without the delay. Removing the delay reduces boot time by 40 sec. Every bit helps. Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20110805140900.GA6774@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-05x86, olpc: Wait for last byte of EC command to be acceptedPaul Fox1-2/+2
When executing EC commands, only waiting when there are still more bytes to write is usually fine. However, if the system suspends very quickly after a call to olpc_ec_cmd(), the last data byte may not yet be transferred to the EC, and the command will not complete. This solves a bug where the SCI wakeup mask was not correctly written when going into suspend. It means that sometimes, on XO-1.5 (but not XO-1), the devices that were marked as wakeup sources can't wake up the system. e.g. you ask for wifi wakeups, suspend, but then incoming wifi frames don't wake up the system as they should. Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Andres Salomon <dilinger@queued.net> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-05xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not setKonrad Rzeszutek Wilk1-0/+1
with CONFIG_XEN and CONFIG_FTRACE set we get this: arch/x86/xen/trace.c:22: error: ‘__HYPERVISOR_console_io’ undeclared here (not in a function) arch/x86/xen/trace.c:22: error: array index in initializer not of integer type arch/x86/xen/trace.c:22: error: (near initialization for ‘xen_hypercall_names’) arch/x86/xen/trace.c:23: error: ‘__HYPERVISOR_physdev_op_compat’ undeclared here (not in a function) Issue was that the definitions of __HYPERVISOR were not pulled if CONFIG_XEN_PRIVILEGED_GUEST was not set. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-04x86-64: Add vsyscall:emulate_vsyscall trace eventAndy Lutomirski2-0/+35
Vsyscall emulation is slow, so make it easy to track down. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/cdaad7da946a80b200df16647c1700db3e1171e9.1312378163.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04x86-64: Add user_64bit_mode paravirt opAndy Lutomirski8-9/+38
Three places in the kernel assume that the only long mode CPL 3 selector is __USER_CS. This is not true on Xen -- Xen's sysretq changes cs to the magic value 0xe033. Two of the places are corner cases, but as of "x86-64: Improve vsyscall emulation CS and RIP handling" (c9712944b2a12373cb6ff8059afcfb7e826a6c54), vsyscalls will segfault if called with Xen's extra CS selector. This causes a panic when older init builds die. It seems impossible to make Xen use __USER_CS reliably without taking a performance hit on every system call, so this fixes the tests instead with a new paravirt op. It's a little ugly because ptrace.h can't include paravirt.h. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/f4fcb3947340d9e96ce1054a432f183f9da9db83.1312378163.git.luto@mit.edu Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04x86-64, xen: Enable the vvar mappingAndy Lutomirski1-1/+3
Xen needs to handle VVAR_PAGE, introduced in git commit: 9fd67b4ed0714ab718f1f9bd14c344af336a6df7 x86-64: Give vvars their own page Otherwise we die during bootup with a message like: (XEN) mm.c:940:d10 Error getting mfn 1888 (pfn 1e3e48) from L1 entry 8000000001888465 for l1e_owner=10, pg_owner=10 (XEN) mm.c:5049:d10 ptwr_emulate: could not get_page_from_l1e() [ 0.000000] BUG: unable to handle kernel NULL pointer dereference at (null) [ 0.000000] IP: [<ffffffff8103a930>] xen_set_pte+0x20/0xe0 Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/4659478ed2f3480938f96491c2ecbe2b2e113a23.1312378163.git.luto@mit.edu Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04x86-64: Work around gold bug 13023Andy Lutomirski1-6/+10
Gold has trouble assigning numbers to the location counter inside of an output section description. The bug was triggered by 9fd67b4ed0714ab718f1f9bd14c344af336a6df7, which consolidated all of the vsyscall sections into a single section. The workaround is IMO still nicer than the old way of doing it. This produces an apparently valid kernel image and passes my vdso tests on both GNU ld version 2.21.51.0.6-2.fc15 20110118 and GNU gold (version 2.21.51.0.6-2.fc15 20110118) 1.10 as distributed by Fedora 15. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/0b260cb806f1f9a25c00ce8377a5f035d57f557a.1312378163.git.luto@mit.edu Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-04x86-64: Move the "user" vsyscall segment out of the data segment.Andy Lutomirski1-18/+18
The kernel's loader doesn't seem to care, but gold complains. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/f0716870c297242a841b949953d80c0d87bf3d3f.1312378163.git.luto@mit.edu Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.