| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On 32 bits, we can have CONFIG_ACPI_SLEEP set without implying
CONFIG_X86_TRAMPOLINE. In that case, we simply do not need to mark
the trampoline as a MAC region.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Shane Wang <shane.wang@intel.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
|
|
S3 sleep requires special setup in tboot. However, the data
structures needed to do such setup are only available if
CONFIG_ACPI_SLEEP is enabled. Abstract them out as much as possible,
so we can have a single tboot_setup_sleep() which either is a proper
implementation or a stub which simply calls BUG().
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Shane Wang <shane.wang@intel.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
|
|
arch/x86/kernel/tboot.c needs <asm/fixmap.h>. In most configurations
that ends up getting implicitly included, but not in all, causing
build failures in some configurations.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
Cc: Shane Wang <shane.wang@intel.com>
|
|
Support for graceful handling of sleep states (S3/S4/S5) after an Intel(R) TXT launch.
Without this patch, attempting to place the system in one of the ACPI sleep
states (S3/S4/S5) will cause the TXT hardware to treat this as an attack and
will cause a system reset, with memory locked. Not only may the subsequent
memory scrub take some time, but the platform will be unable to enter the
requested power state.
This patch calls back into the tboot so that it may properly and securely clean
up system state and clear the secrets-in-memory flag, after which it will place
the system into the requested sleep state using ACPI information passed by the kernel.
arch/x86/kernel/smpboot.c | 2 ++
drivers/acpi/acpica/hwsleep.c | 3 +++
kernel/cpu.c | 7 ++++++-
3 files changed, 11 insertions(+), 1 deletion(-)
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Support for graceful handling of kernel reboots after an Intel(R) TXT launch.
Without this patch, attempting to reboot or halt the system will cause the
TXT hardware to lock memory upon system restart because the secrets-in-memory
flag that was set on launch was never cleared. This will in turn cause BIOS
to execute a TXT Authenticated Code Module (ACM) that will scrub all of memory
and then unlock it. Depending on the amount of memory in the system and its type,
this may take some time.
This patch creates a 1:1 address mapping to the tboot module and then calls back
into tboot so that it may properly and securely clean up system state and clear
the secrets-in-memory flag. When it has completed these steps, the tboot module
will reboot or halt the system.
arch/x86/kernel/reboot.c | 8 ++++++++
init/main.c | 3 +++
2 files changed, 11 insertions(+)
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
This patch adds kernel configuration and boot support for Intel Trusted
Execution Technology (Intel TXT).
Intel's technology for safer computing, Intel Trusted Execution
Technology (Intel TXT), defines platform-level enhancements that
provide the building blocks for creating trusted platforms.
Intel TXT was formerly known by the code name LaGrande Technology (LT).
Intel TXT in Brief:
o Provides dynamic root of trust for measurement (DRTM)
o Data protection in case of improper shutdown
o Measurement and verification of launched environment
Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems. It is currently available on desktop systems based on
the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP
dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45
Express chipsets.
For more information, see http://www.intel.com/technology/security/.
This site also has a link to the Intel TXT MLE Developers Manual, which
has been updated for the new released platforms.
A much more complete description of how these patches support TXT, how to
configure a system for it, etc. is in the Documentation/intel_txt.txt file
in this patch.
This patch provides the TXT support routines for complete functionality,
documentation for TXT support and for the changes to the boot_params structure,
and boot detection of a TXT launch. Attempts to shutdown (reboot, Sx) the system
will result in platform resets; subsequent patches will support these shutdown modes
properly.
Documentation/intel_txt.txt | 210 +++++++++++++++++++++
Documentation/x86/zero-page.txt | 1
arch/x86/include/asm/bootparam.h | 3
arch/x86/include/asm/fixmap.h | 3
arch/x86/include/asm/tboot.h | 197 ++++++++++++++++++++
arch/x86/kernel/Makefile | 1
arch/x86/kernel/setup.c | 4
arch/x86/kernel/tboot.c | 379 +++++++++++++++++++++++++++++++++++++++
security/Kconfig | 30 +++
9 files changed, 827 insertions(+), 1 deletion(-)
Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Gang Wei <gang.wei@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86/pci: insert ioapic resource before assigning unassigned resources
|
|
Avoid the following:
[ 0.012093] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy+0x2f/0x40()
Rather than chase each new cpuid-detected feature, just lie about the highest
valid CPUID so this code is never run.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
fix: "make Guest" was complaining about duplicated G:032
Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
when building 32-bit, I see this ..
arch/x86/kernel/pvclock.c:63:7: warning: "__x86_64__" is not defined
Signed-off-by: Dave Jones <davej@redhat.com>
LKML-Reference: <20090713201437.GA12165@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The variable apic_numaq placed in noninit section references the
function wakeup_secondary_cpu_via_nmi(), which is in __cpuinit
section. Thus causes a section mismatch warning. To avoid such
mismatch we mark apic_numaq as __refdata.
We were warned by the following warning:
WARNING: arch/x86/kernel/built-in.o(.data+0x932c): Section mismatch in
reference from the variable apic_numaq to the function
.cpuinit.text:wakeup_secondary_cpu_via_nmi()
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
LKML-Reference: <b9df5fa10907120407p6b4f67dtf4d563155488188a@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The variable apic_es7000_cluster references the function __cpuinit
wakeup_secondary_cpu_via_mip() from a noninit section. So we've been
warned by the following warning. To avoid possible collision between
init/noninit, its best to mark the variable as __refdata.
We were warned by the following warning:
LD arch/x86/kernel/apic/built-in.o
WARNING: arch/x86/kernel/apic/built-in.o(.data+0x198c): Section
mismatch in reference from the variable apic_es7000_cluster to the
function .cpuinit.text:wakeup_secondary_cpu_via_mip()
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
LKML-Reference: <b9df5fa10907120404k6279a10ch5e9682432272706f@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Since commit 5fd29d6c ("printk: clean up handling of log-levels
and newlines"), the kernel logs segfaults like:
<6>gnome-power-man[24509]: segfault at 20 ip 00007f9d4950465a sp 00007fffbb50fc70 error 4 in libgobject-2.0.so.0.2103.0[7f9d494f7000+45000]
with the extra "<6>" being KERN_INFO. This happens because the
printk in show_signal_msg() started with KERN_CONT and then
used "%s" to pass in the real level; and KERN_CONT is no longer
an empty string, and printk only pays attention to the level at
the very beginning of the format string.
Therefore, remove the KERN_CONT from this printk, since it is
now actively causing problems (and never really made any
sense).
Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <874otjitkj.fsf@shaolin.home.digitalvampire.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cfq-iosched: reset oom_cfqq in cfq_set_request()
block: fix sg SG_DXFER_TO_FROM_DEV regression
block: call blk_scsi_ioctl_init()
Fix congestion_wait() sync/async vs read/write confusion
|
|
* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
dma-debug: Fix the overlap() function to be correct and readable
oprofile: reset bt_lost_no_mapping with other stats
x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon
signals: declare sys_rt_tgsigqueueinfo in syscalls.h
rcu: Mark Hierarchical RCU no longer experimental
dma-debug: Put all hash-chain locks into the same lock class
dma-debug: fix off-by-one error in overlap function
|
|
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
perf report: Add "Fractal" mode output - support callchains with relative overhead rate
perf_counter tools: callchains: Manage the cumul hits on the fly
perf report: Change default callchain parameters
perf report: Use a modifiable string for default callchain options
perf report: Warn on callchain output request from non-callchain file
x86: atomic64: Inline atomic64_read() again
x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative()
x86: atomic64: Improve atomic64_xchg()
x86: atomic64: Export APIs to modules
x86: atomic64: Improve atomic64_read()
x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP
x86: atomic64: Fix unclean type use in atomic64_xchg()
x86: atomic64: Make atomic_read() type-safe
x86: atomic64: Reduce size of functions
x86: atomic64: Improve atomic64_add_return()
x86: atomic64: Improve cmpxchg8b()
x86: atomic64: Improve atomic64_read()
x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file
x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too
perf report: Annotate variable initialization
...
|
|
Pull the initial preempt_count value into a single
definition site.
Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.
The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.
Cc: tony.luck@intel.com
Cc: rth@twiddle.net
Cc: geert@linux-m68k.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Stephen reported that his DL585 G2 needed noapic after 2.6.22 (?)
Dann bisected it down to:
commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029
Date: Tue Feb 19 03:21:20 2008 -0800
x86: multi pci root bus with different io resource range, on
64-bit
It turns out that:
1. that AMD-based systems have two HT chains.
2. BIOS doesn't allocate resources for BAR 6 of devices under 8132 etc
3. that multi-peer-root patch will try to split root resources to peer
root resources according to PCI conf of NB
4. PCI core assigns unassigned resources, but they overlap with BARs
that are used by ioapic addr of io4 and 8132.
The reason: at that point ioapic address are not inserted yet. Solution
is to insert ioapic resources into the tree a bit earlier.
Reported-by: Stephen Frost <sfrost@snowman.net>
Reported-and-Tested-by: dann frazier <dannf@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@jbarnes-g45.(none)>
|
|
Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
cxgb3: Fix crash caused by stashing wrong netdev_queue
ixgbe: Fix coexistence of FCoE and Flow Director in 82599
memory barrier: adding smp_mb__after_lock
net: adding memory barrier to the poll and receive callbacks
netpoll: Fix carrier detection for drivers that are using phylib
includecheck fix: include/linux, rfkill.h
p54: tx refused but queue active
Atheros Kconfig needs to be dependent on WLAN_80211
mac80211: fix docbook
mac80211_hwsim: avoid NULL access
ssb: Add support for 4318E
b43: Add support for 4318E
zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
zd1211rw: 07b8:6001 is a ZD1211B
r6040: bump driver version to 0.24 and date to 08 July 2009
r6040: restore MIER register correctly when IRQ line is shared
ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
davinci_emac: fix kernel oops when changing MAC address while interface is down
igb: set lan id prior to configuring phy
mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
...
|
|
The short name of the achitecture is 'arch_perfmon'. This patch
changes the kernel parameter to use this name.
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Adding smp_mb__after_lock define to be used as a smp_mb call after
a lock.
Making it nop for x86, since {read|write|spin}_lock() on x86 are
full memory barriers.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alex found that specjbb2005 still can not run with hugepages on an
x86-64 machine. This only happens when numa is not compiled in.
The root cause: node_set_state will not set it back for us in that case,
so don't clear that when numa is not select in config
[ v2: use node_clear_state instead ]
Reported-and-Tested-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up
handling of log-levels and newlines") changed printk semantics. printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.
<level> is now included in the output on each additional use.
Remove all uses of multiple KERN_<level>s in formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states
[CPUFREQ] fix (utter) cpufreq_add_dev mess
[CPUFREQ] Cleanup locking in conservative governor
[CPUFREQ] Cleanup locking in ondemand governor
[CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported
[CPUFREQ] Eliminate the recent lockdep warnings in cpufreq
|
|
Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify
power/cpu_(32|64).c) renamed cpu_32.c to cpu.c, but did not update
the special compilation flags for the file for the new name.
This patch fixes the compilation flags, and therefore fixes resume
from suspend on my Acer Aspire One.
[rjw: The regression from 2.6.30 fixed by this patch is tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=13661]
Signed-off-by: Peter Chubb <peterc@nicta.com.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Provide support for family 0xf processors with 2 P-states
below the elevator voltage. Remove the checks that prevent
this configuration from being supported and increase the
transition voltage to prevent errors during the transition.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
|
|
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix usage of bios intcall()
x86: Remove unused function lapic_watchdog_ok()
x86: Remove unused variable disable_x2apic
x86, kvm: Fix section mismatches in kvm.c
x86: Add missing annotation to arch/x86/lib/copy_user_64.S::copy_to_user
x86: Fix fixmap page order for FIX_TEXT_POKE0,1
amd-iommu: set evt_buf_size correctly
amd-iommu: handle alias entries correctly in init code
x86: Fix printk call in print_local_apic()
x86: Declare check_efer() before it gets used
x86: Mark device_nb as static and fix NULL noise
x86: Remove double declaration of MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1
xen: Use kcalloc() in xen_init_IRQ()
x86: Fix fixmap ordering
x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c
|
|
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: Fix IRQ swizzling for ARI-enabled devices
ia64/PCI: adjust section annotation for pcibios_setup()
x86/PCI: get root CRS before scanning children
x86/PCI: fix boundary checking when using root CRS
PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume
PCI MSI: Unmask MSI if setup failed
PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names
PCI: make pci_name() take const argument
PCI: More PATA quirks for not entering D3
PCI: fix kernel-doc warnings
PCI: check if bus has a proper bridge device before triggering SBR
PCI: remove pci_dac_dma_... APIs on mn10300
PCI ECRC: Remove unnecessary semicolons
PCI MSI: Return if alloc_msi_entry for MSI-X failed
|
|
* git://git.infradead.org/iommu-2.6:
intel-iommu: Don't use identity mapping for PCI devices behind bridges
intel-iommu: Use iommu_should_identity_map() at startup time too.
intel-iommu: No mapping for non-PCI devices
intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers
intel-iommu: Add iommu_should_identity_map() function
intel-iommu: Fix reattaching of devices to identity mapping domain
intel-iommu: Don't set identity mapping for bypassed graphics devices
intel-iommu: Fix dma vs. mm page confusion with aligned_nrpages()
|
|
Fix for this issue on x86_64:
rostedt@goodmis.org wrote:
> On bootup of the latest kernel my init segfaults. Debugging it,
> I found that vread_tsc (a vsyscall) increments some strange
> kernel memory:
>
> 0000000000000000 <vread_tsc>:
> 0: 55 push %rbp
> 1: 48 ff 05 00 00 00 00 incq 0(%rip)
> # 8 <vread_tsc+0x8>
> 4: R_X86_64_PC32 .bss+0x3c
> 8: 48 89 e5 mov %rsp,%rbp
> b: 66 66 90 xchg %ax,%ax
> e: 48 ff 05 00 00 00 00 incq 0(%rip)
> # 15 <vread_tsc+0x15>
> 11: R_X86_64_PC32 .bss+0x44
> 15: 66 66 90 xchg %ax,%ax
> 18: 48 ff 05 00 00 00 00 incq 0(%rip)
> # 1f <vread_tsc+0x1f>
> 1b: R_X86_64_PC32 .bss+0x4c
> 1f: 0f 31 rdtsc
>
>
> Those "incq" is very bad to happen in vsyscall memory, since
> userspace can not modify it. You need to make something prevent
> profiling of vsyscall memory (like I do with ftrace).
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some intcall() misuses the input biosregs as output in
cf06de7b9cdd3efee7a59dced1977b3c21d43732
This fixes the problem vga=ask boot option doesn't show enough modes.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090701021307.GA3127@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
We need to give people a little more time to fix the broken drivers.
Re-introduce this, but tied in properly with the 'iommu=pt' support this
time. Change the config option name and make it default to 'no' too.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
Now atomic64_read() is light weight (no register pressure and
small icache), we can inline it again.
Also use "=&A" constraint instead of "+A" to avoid warning
about unitialized 'res' variable. (gcc had to force 0 in eax/edx)
$ size vmlinux.prev vmlinux.after
text data bss dec hex filename
4908667 451676 1684868 7045211 6b805b vmlinux.prev
4908651 451676 1684868 7045195 6b804b vmlinux.after
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <4A4E1AA2.30002@gmail.com>
[ Also fix typo in atomic64_set() export ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Linus noticed that the variable name 'old_val' is
confusingly named in these functions - the correct
naming is 'new_val'.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907030942260.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Remove the read-first logic from atomic64_xchg() and simplify
the loop.
This function was the last user of __atomic64_read() - remove it.
Also, change the 'real_val' assumption from the somewhat quirky
1ULL << 32 value to the (just as arbitrary, but simpler) value
of 0.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
atomic64_t primitives are used by a handful of drivers,
so export the APIs consistently. These were inlined
before.
Also mark atomic64_32.o a core object, so that the symbols
are available even if not linked to core kernel pieces.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Optimize atomic64_read() as a special open-coded
cmpxchg8b variant. This generates nicer code:
arch/x86/lib/atomic64_32.o:
text data bss dec hex filename
435 0 0 435 1b3 atomic64_32.o.before
431 0 0 431 1af atomic64_32.o.after
md5:
bd8ab95e69c93518578bfaf0ea3be4d9 atomic64_32.o.before.asm
2bdfd4bd1f6b7b61b7fc127aef90ce3b atomic64_32.o.after.asm
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Occasionally we get bugs where atomic_read or atomic_set are
used on atomic64_t variables or vice versa. These bugs don't
generate warnings on x86 because atomic_read and atomic_set are
coded as macros rather than C functions, so we don't get any
type-checking on their arguments; similarly for atomic64_read
and atomic64_set in 64-bit kernels.
This converts them to C functions so that the arguments are
type-checked and bugs like this will get caught more easily. It
also converts atomic_cmpxchg and atomic_xchg, and
atomic64_cmpxchg and atomic64_xchg on 64-bit, so we get
type-checking on their arguments too.
Compiling a typical 64-bit x86 config, this generates no new
warnings, and the vmlinux text is 86 bytes smaller.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
lapic_watchdog_ok() is a global function but no one is using it.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1246554335.2242.29.camel@jaswinder.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
setup_nox2apic() is writing 1 to disable_x2apic but no one is reading it.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1246554239.2242.27.camel@jaswinder.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The function paravirt_ops_setup() has been refering the
variable no_timer_check, which is a __initdata. Thus generates
the following warning. paravirt_ops_setup() function is called
from kvm_guest_init() which is a __init function. So to fix
this we mark paravirt_ops_setup as __init.
The sections-check output that warned us about this was:
LD arch/x86/built-in.o
WARNING: arch/x86/built-in.o(.text+0x166ce): Section mismatch in
reference from the function paravirt_ops_setup() to the variable
.init.data:no_timer_check
The function paravirt_ops_setup() references
the variable __initdata no_timer_check.
This is often because paravirt_ops_setup lacks a __initdata
annotation or the annotation of no_timer_check is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Acked-by: Avi Kivity <avi@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <b9df5fa10907012240y356427b8ta4bd07f0efc6a049@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While examining symbol generation in perf_counter tools, I
noticed that copy_to_user() had no size in vmlinux's symtab.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <1246512440.13293.3.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Masami reported:
> Since the fixmap pages are assigned higher address to lower,
> text_poke() has to use it with inverted order (FIX_TEXT_POKE1
> to FIX_TEXT_POKE0).
I prefer to just invert the order of the fixmap declaration.
It's simpler and more straightforward.
Backward fixmaps seems to be used by both x86 32 and 64.
It's really rare but a nasty bug, because it only hurts when
instructions to patch are crossing a page boundary. If this
happens, the fixmap write accesses will spill on the following
fixmap, which may very well crash the system. And this does not
crash the system, it could leave illegal instructions in place.
Thanks Masami for finding this.
It seems to have crept into the 2.6.30-rc series, so this calls
for a -stable inclusion.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090701213722.GH19926@Krystal>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Linus noticed that atomic64_xchg() uses atomic_read(), which
happens to work because atomic_read() is a macro so the
.counter value gets u64-read on 32-bit too - but this is really
bogus and serious bugs are waiting to happen.
Fix atomic64_xchg() to use __atomic64_read() instead.
No code changed:
arch/x86/lib/atomic64_32.o:
text data bss dec hex filename
435 0 0 435 1b3 atomic64_32.o.before
435 0 0 435 1b3 atomic64_32.o.after
md5:
bd8ab95e69c93518578bfaf0ea3be4d9 atomic64_32.o.before.asm
bd8ab95e69c93518578bfaf0ea3be4d9 atomic64_32.o.after.asm
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Linus noticed that atomic64_xchg() uses atomic_read(), which
happens to work because atomic_read() is a macro so the
.counter value gets u64-read on 32-bit too - but this is really
bogus and serious bugs are waiting to happen.
Change atomic_read() to be a type-safe inline, and this exposes
the atomic64 bogosity as well:
arch/x86/lib/atomic64_32.c: In function ‘atomic64_xchg’:
arch/x86/lib/atomic64_32.c:39: warning: passing argument 1 of ‘atomic_read’ from incompatible pointer type
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
cmpxchg8b is a huge instruction in terms of register footprint,
we almost never want to inline it, not even within the same
code module.
GCC 4.3 still messes up for two functions, under-judging the
true cost of this instruction - so annotate two key functions
to reduce the bloat:
arch/x86/lib/atomic64_32.o:
text data bss dec hex filename
1763 0 0 1763 6e3 atomic64_32.o.before
435 0 0 435 1b3 atomic64_32.o.after
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Linus noted (based on Eric Dumazet's numbers) that we would
probably be better off not trying an atomic_read() in
atomic64_add_return() but intead intentionally let the first
cmpxchg8b fail - to get a cache-friendly 'give me ownership
of this cacheline' transaction. That can then be followed
by the real cmpxchg8b which sets the value local to the CPU.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Rewrite cmpxchg8b() to not use %edi register but a generic "+m"
constraint, to increase compiler freedom in code generation and
possibly better code.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
H. Peter Anvin
Joseph Cihula
Linus Torvalds
Rusty Russell
Matias Zabaljauregui
Dave Jones
Rakib Mullick
Roland Dreier
Peter Zijlstra
Yinghai Lu
Jens Axboe
Robert Richter
Jiri Olsa
Joe Perches
Peter Chubb
Mark Langsdorf
Peter Oberparleiter
Akinobu Mita
David Woodhouse
Eric Dumazet
Ingo Molnar
Paul Mackerras
Jaswinder Singh Rajput
Mike Galbraith
Mathieu Desnoyers