aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-11-15[MIPS] Fix typo in R3000 TRACE_IRQFLAGS codeAtsushi Nemoto1-1/+1
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Sibyte: Replace use of removed IO_SPACE_BASE with IOADDR.Ralf Baechle2-6/+6
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] iounmap if in vr41xx_pciu_init() pci clock is over 33MHzRoel Kluin1-0/+1
iounmap if pci clock is over 33MHz. Cosmetic because the iomap() in this case is just a bit of address magic. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] BCM1480: Remove duplicate acknowledge of timer interrupt.Ralf Baechle1-13/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Sibyte: pin timer interrupt to their cores.Ralf Baechle2-0/+6
Or strange things will happen. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Qemu: Add early printk, your friend in a cold night.Ralf Baechle5-5/+35
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Convert reference to mem_map to pfn_to_page().Ralf Baechle1-1/+1
This was crashing the combination of highmem and sparsemem. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[MIPS] Sibyte: resurrect old cache hack.Ralf Baechle1-1/+6
The recent switch of the Sibyte SOCs from the processor specific cache managment code in c-sb1.c to c-r4k.c lost this old hack [MIPS] Hack for SB1 cache issues Removing flush_icache_page a while ago broke SB1 which was using an empty flush_data_cache_page function. This glues things well enough so a more efficient but also more intrusive solution can be found later. Signed-Off-By: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> in the hope it was no longer needed. As it turns it still is so resurrect it until there is a better solution. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-15[AVR32] Export intc_get_pending symbolHaavard Skinnemoen1-1/+3
Oprofile needs to call intc_get_pending() in order to determine whether a performance counter interrupt is pending. Also, include the header which declares intc_get_pending() and fix the definition to match the prototype. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-15[AVR32] Fix duplicate clock index in at32ap machine codeben.nizette@iinet.net.au1-1/+1
There's a duplicate clock index between USART0 and USART1 which may be causing system crashes when USART0 is used. Change the USART0 index to '3', indicating the clock that is actually used by USART0. Signed-off-by: Ben Nizette <ben@niasdigital.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-15[AVR32] remove UID16 optionAdrian Bunk1-3/+0
avr32 already sees the option from init/Kconfig. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-15[AVR32] Turn off debugging in SMC driverHaavard Skinnemoen1-1/+0
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-15Extend I/O resource for wdt0 for at32ap7000 devicesHans-Christian Egtvedt1-1/+1
This patch extends the I/O resource to 0xfff000cf which will enable the watchdog driver to access the reset cause (RCAUSE) register. Making it capable of reporting boot status. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86Linus Torvalds13-1171/+578
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86: x86: enable "make ARCH=x86" x86: do not use $(ARCH) when not needed kconfig: use $K64BIT to set 64BIT with all*config targets kconfig: add helper to set config symbol from environment variable kconfig: factor out code in confdata.c x86: move the rest of the menu's to Kconfig x86: move all simple arch settings to Kconfig x86: copy x86_64 specific Kconfig symbols to Kconfig.i386 x86: add X86_64 dependency to x86_64 specific symbols in Kconfig.x86_64 x86: add X86_32 dependency to i386 specific symbols in Kconfig.i386 x86: arch/x86/Kconfig.cpu unification x86: start unification of arch/x86/Kconfig.* x86: unification of cfufreq/Kconfig
2007-11-14CRISv10 fasttimer: Scrap INLINE and name timeval_cmp betterJesper Nilsson1-9/+7
Scrap the local __INLINE__ macro, and rename timeval_cmp to fasttime_cmp. Inline macro was completely unnecessary since the macro was defined locally to be inline. timeval_cmp was inaccurately named since it does comparison on struct fasttimer_t and not on struct timeval. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14CRISv10 memset library add lineendings to asmJesper Nilsson1-41/+41
Add \n\ at end of lines inside asm statement to avoid warning. No change except adding \n\ to end of line and correcting whitespace has been done. Removes warning about multi-line string literals when compiling arch/cris/arch-v10/lib/memset.c Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14CRISv10 string library add lineendings to asmJesper Nilsson1-27/+27
Add \n\ at end of lines inside asm statement to avoid warning. No change except adding \n\ to end of line and correcting whitespace has been done. Removes warning about multi-line string literals when compiling arch/cris/arch-v10/lib/string.c Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14CRISv10 usercopy library add lineendings to asmJesper Nilsson1-157/+157
Removes warning when compiling arch/cris/arch-v10/lib/usercopy.c No change except adding \n\ on the end of the lines has been done. Removes warning about multi-line string literals. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14CRISv32: add cache flush operationsJesper Nilsson2-0/+127
These are needed due to a cache bug, and can be used to make sure that the DMA descriptors are flushed to memory and can be safely handled by DMA. flush_dma_descr - Flush one DMA descriptor. flush_dma_list - Flush a complete list of DMA descriptors. cris_flush_cache - Flush the complete cache. cris_flush_cache_range - Flush only the specified range Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14CRISv10 improve and bugfix fasttimerJesper Nilsson1-201/+114
Improve and bugfix CRIS v10 fast timers. - irq_handler_t now only takes two arguments. - Keep interrupts disabled as long as we have a reference to the fasttimer list and only enable them while doing the callback. del_fast_timer may be called from other interrupt context. - Fix bug where debug code could return without calling local_irq_restore. - Use jiffies instead of usec (change from struct timeval to fasttime_t). - Don't initialize static variables to zero. - Remove obsolete #ifndef DECLARE_WAITQUEUE code. - fast_timer_init should be __initcall. - Change status/debug variables to unsigned. - Remove CVS log and CVS id. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14CRISv10: fix timer interrupt parametersJesper Nilsson1-4/+7
Fix timer interrupt parameters for CRIS v10. - irq_handler_t only takes two arguments, use get_irq_regs to get regs for profiling. - Call update_process_times. - Remove CVS tag. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14CRIS: remove MTD_AMSTD and MTD_OBSOLETE_CHIPS take twoJesper Nilsson6-17/+8
Remove MTD_AMDSTD and MTD_OBSOLETE_CHIPS from defconfig, Kconfig and code, instead we'll use MTD_CFI or MTD_JEDECPROBE. [akpm@linux-foundation.org: codingl-style cleanups] Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris: ARRAY_SIZE() cleanupAlex Unleashed5-9/+7
I'm converting most array size calculations under arch/ to use ARRAY_SIZE(). This is the patch for CRIS. Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: defconfig updatesJesper Nilsson1-43/+33
Remove some unused config lines, and add some others that needs to be off for a succesful compile. This is the minimal set of changes for 2.6.23. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: fix crisksyms.cJesper Nilsson1-14/+3
- Add __negdi2 to exported symbols. - Remove string functions from exported symbols. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: setup.c needs param.hJesper Nilsson1-0/+1
Include linux/param.h for HZ. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: fixes in arch/cris/kernel/time.cJesper Nilsson1-7/+3
- Remove debug print. - Change #if to #ifdef to avoid compile time warning if CONFIG_PROFILING isn't set. - Number of parameters to profile_tick has changed, drop the regs parameter. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: corrected and improved NMI and IRQ handlingJesper Nilsson6-27/+100
Corrects compile errors and the following: - Remove oldset parameter from do_signal and do_notify_resume. - Modified to fit new consolidated IRQ handling code. - Reverse check order between external nmi and watchdog nmi to avoid false watchdog oops in case of a glitch on the nmi pin. - Return from an pin-generated NMI the same way as for other interrupts. - Moved blocking of ethernet rx/tx irq from ethernet interrupt handler to low-level asm interrupt handlers. Fixed in the multiple interrupt handler also. - Add space for thread local storage in thread_info struct. - Add NO_DMA to Kconfig, and include arch specific Kconfig using arch independent path. Include subsystem Kconfigs for pcmcia, usb, i2c, rtc and pci. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: sys_cris.c needs fs.hJesper Nilsson1-0/+1
Include linux/fs.h, needed for do_pipe. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: irq fixesJesper Nilsson2-2/+8
- New file include/asm-cris/irq_regs.h. - Change handling of registers for do_IRQ. - Add GENERIC_HARDIRQS to Kconfig. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris build fixes: Add missing syscallsJesper Nilsson1-0/+36
Add missing syscalls to cris architecture. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14x86: don't call mce_create_device on CPU_UP_PREPAREAndreas Herrmann1-7/+11
Fix regression introduced with d435d862baca3e25e5eec236762a43251b1e7ffc ("cpu hotplug: mce: fix cpu hotplug error handling"). A CPU which was not brought up during boot (using maxcpus and additional_cpus parameters) couldn't be onlined anymore. For such a CPU it seemed that MCE was not supported during CPU_UP_PREPARE-time which caused mce_cpu_callback to return NOTIFY_BAD to notifier_call_chain. To fix this we: - call mce_create_device for CPU_ONLINE event (instead of CPU_UP_PREPARE), - avoid mce_remove_device() for the CPU that is not correctly initialized by mce_create_device() failure, - make mce_cpu_callback always return NOTIFY_OK for CPU_ONLINE event. Because CPU_ONLINE callback return value is always ignored. [akinobu.mita@gmail.com: avoid mce_remove_device() for not initialized device] [akinobu.mita@gmail.com: make mce_cpu_callback always return NOTIFY_OK] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14x86: disable preemption in delay_tsc()Andrew Morton2-4/+10
Marin Mitov points out that delay_tsc() can misbehave if it is preempted and rescheduled on a different CPU which has a skewed TSC. Fix it by disabling preemption. (I assume that the worst-case behaviour here is a stall of 2^32 cycles) Cc: Andi Kleen <ak@suse.de> Cc: Marin Mitov <mitov@issp.bas.bg> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14uml: fix build for !CONFIG_PRINTKJeff Dike1-1/+12
Handle the case of CONFIG_PRINTK being disabled. This requires a do-nothing stub to be present in arch/um/include/user.h so that we don't get references to printk from libc code. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14uml: fix build for !CONFIG_TCPJeff Dike1-2/+12
Make UML build in the absence of CONFIG_INET by making the inetaddr_notifier registration depend on it. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14uml: remove last include of libc asm/page.hJeff Dike1-1/+0
asm/page.h is disappearing from the libc headers and we don't need it anyway. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14uml: fix spurious IRQ testingJeff Dike1-6/+7
The spurious IRQ testing in request_irq is mishandled in um_request_irq, which sets the incoming file descriptors non-blocking only after request_irq succeeds. This results in the spurious irq calling read on a blocking descriptor, and a hang. Fixed by reversing the O_NONBLOCK setting and the request_irq call. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14mips: undo locking on error path returnsRoel Kluin2-0/+3
[akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14cris gpio: undo locks before returningRoel Kluin1-4/+11
Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Add IORESOUCE_BUSY flag for System RAMYasunori Goto1-4/+2
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY. But ia64 registers it as IORESOURCE_MEM only. In addition, memory hotplug code registers new memory as IORESOURCE_MEM too. This difference causes a failure of memory unplug of x86-64. This patch fixes it. This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI device. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Cc: Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14uml: fix recvmsg return value checkingJeff Dike1-2/+1
Stupid bug - we need to compare the return value of recvmsg to the value of iov_len, not its size. This caused port_helper processes not to be killed on shutdown on x86_64 because the pids weren't being passed out properly. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14uml: fix symlink loopsJeff Dike1-3/+3
symlinks to directories in the non-O= case were lacking -n, which meant that, when the link already existed, a new link pointing at itself was created in the target directory. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-13Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds1-0/+11
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (i5k_amb) Convert macros to C functions hwmon: (w83781d) Add missing curly braces hwmon: (abituguru3) Identify ABit IP35 Pro as such hwmon: (f75375s) pwmX_mode sysfs files writable for f75375 variant hwmon: (f75375s) On n2100 systems, set fans to full speed on boot hwmon: (f75375s) Allow setting up fans with platform_data hwmon: (f75375s) Add new style bindings hwmon: (lm70) Convert semaphore to mutex hwmon: (applesmc) Add support for Mac Pro 2 x Quad-Core hwmon: (abituguru3) Add support for 2 new motherboards hwmon: (ibmpex) Change printk to dev_{info,err} macros hwmon: (i5k_amb) New memory temperature sensor driver hwmon: (f75375s) fix pwm mode setting hwmon: (ibmpex.c) fix NULL dereference hwmon: (sis5595) Split sis5595_attributes_opt hwmon: (sis5595) Add individual alarm files hwmon: (w83627hf) push nr+1 offset into *_REG_FAN macros and simplify hwmon: (w83627hf) hoist nr-1 offset out of show-store-temp-X hwmon: Add power meter spec to Documentation/hwmon/sysfs-interface
2007-11-13Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds8-19/+24
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Silence an annoying boot message [POWERPC] Fix early btext debug on PowerMac [POWERPC] Demote clockevent printk to KERN_DEBUG [POWERPC] Fix CONFIG_SMP=n build error on ppc64 [POWERPC] Avoid unpaired stwcx. on some processors [POWERPC] Fix oops related to 4xx flush_tlb_page modification [POWERPC] cpm: Fix a couple minor issues in cpm_common.c. [POWERPC] Add -mno-spe for ARCH=powerpc builds
2007-11-13[POWERPC] Silence an annoying boot messageStephen Rothwell1-12/+4
vmemmap_populate will printk (with KERN_WARNING) for a lot of pages if CONFIG_SPARSEMEM_VMEMMAP is enabled (at least it does on iSeries). Use pr_debug for it instead. Replace the only other use of DBG in this file with pr_debug as well. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13[POWERPC] Fix early btext debug on PowerMacBenjamin Herrenschmidt1-1/+3
The early btext debug wouldn't work on PowerMac when booted from BootX due to the code looking for the wrong property name. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13[POWERPC] Demote clockevent printk to KERN_DEBUGTony Breeds1-1/+1
These don't need to be seen by everyone on every boot. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13[POWERPC] Fix CONFIG_SMP=n build error on ppc64Olof Johansson1-2/+0
The patch "KVM: fix !SMP build error" change the way smp_call_function() actually uses the passed in function names on non-SMP builds. So previously it was never caught that the function passed in was never actually defined. This causes a build error on ppc64_defconfig + CONFIG_SMP=n: arch/powerpc/mm/tlb_64.c: In function 'pgtable_free_now': arch/powerpc/mm/tlb_64.c:71: error: 'pte_free_smp_sync' undeclared (first use in this function) arch/powerpc/mm/tlb_64.c:71: error: (Each undeclared identifier is reported only once arch/powerpc/mm/tlb_64.c:71: error: for each function it appears in.) So we need to define it even if CONFIG_SMP is off. Either that or ifdef out the smp_call_function() call, but that's ugly. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13[POWERPC] Avoid unpaired stwcx. on some processorsBecky Bruce2-0/+12
The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into mergePaul Mackerras2-3/+4
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.