aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-21x86/mm: split vmalloc_sync_all()Joerg Roedel1-2/+24
Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES] Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-21Merge tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds3-9/+3
Pull powerpc fixes from Michael Ellerman: "Two fixes for bugs introduced this cycle: - fix a crash when shutting down a KVM PR guest (our original style of KVM which doesn't use hypervisor mode) - fix for the recently added 32-bit KASAN_VMALLOC support Thanks to: Christophe Leroy, Greg Kurz, Sean Christopherson" * tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Fix kernel crash with PR KVM powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOC
2020-03-20Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds4-11/+26
Pull arm64 fixes from Will Deacon: - Fix panic() when it occurs during secondary CPU startup - Fix "kpti=off" when KASLR is enabled - Fix howler in compat syscall table for vDSO clock_getres() fallback * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: compat: Fix syscall number of compat_clock_getres arm64: kpti: Fix "kpti=off" when KASLR is enabled arm64: smp: fix crash_smp_send_stop() behaviour arm64: smp: fix smp_send_stop() behaviour
2020-03-20KVM: PPC: Fix kernel crash with PR KVMGreg Kurz2-2/+1
With PR KVM, shutting down a VM causes the host kernel to crash: [ 314.219284] BUG: Unable to handle kernel data access on read at 0xc00800000176c638 [ 314.219299] Faulting instruction address: 0xc008000000d4ddb0 cpu 0x0: Vector: 300 (Data Access) at [c00000036da077a0] pc: c008000000d4ddb0: kvmppc_mmu_pte_flush_all+0x68/0xd0 [kvm_pr] lr: c008000000d4dd94: kvmppc_mmu_pte_flush_all+0x4c/0xd0 [kvm_pr] sp: c00000036da07a30 msr: 900000010280b033 dar: c00800000176c638 dsisr: 40000000 current = 0xc00000036d4c0000 paca = 0xc000000001a00000 irqmask: 0x03 irq_happened: 0x01 pid = 1992, comm = qemu-system-ppc Linux version 5.6.0-master-gku+ (greg@palmb) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #17 SMP Wed Mar 18 13:49:29 CET 2020 enter ? for help [c00000036da07ab0] c008000000d4fbe0 kvmppc_mmu_destroy_pr+0x28/0x60 [kvm_pr] [c00000036da07ae0] c0080000009eab8c kvmppc_mmu_destroy+0x34/0x50 [kvm] [c00000036da07b00] c0080000009e50c0 kvm_arch_vcpu_destroy+0x108/0x140 [kvm] [c00000036da07b30] c0080000009d1b50 kvm_vcpu_destroy+0x28/0x80 [kvm] [c00000036da07b60] c0080000009e4434 kvm_arch_destroy_vm+0xbc/0x190 [kvm] [c00000036da07ba0] c0080000009d9c2c kvm_put_kvm+0x1d4/0x3f0 [kvm] [c00000036da07c00] c0080000009da760 kvm_vm_release+0x38/0x60 [kvm] [c00000036da07c30] c000000000420be0 __fput+0xe0/0x310 [c00000036da07c90] c0000000001747a0 task_work_run+0x150/0x1c0 [c00000036da07cf0] c00000000014896c do_exit+0x44c/0xd00 [c00000036da07dc0] c0000000001492f4 do_group_exit+0x64/0xd0 [c00000036da07e00] c000000000149384 sys_exit_group+0x24/0x30 [c00000036da07e20] c00000000000b9d0 system_call+0x5c/0x68 This is caused by a use-after-free in kvmppc_mmu_pte_flush_all() which dereferences vcpu->arch.book3s which was previously freed by kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy() is called after kvmppc_core_vcpu_free() since commit ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code"). The kvmppc_mmu_destroy() helper calls one of the following depending on the KVM backend: - kvmppc_mmu_destroy_hv() which does nothing (Book3s HV) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 32-bit) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 64-bit) - kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc) It turns out that this is only relevant to PR KVM actually. And both 32 and 64 backends need vcpu->arch.book3s to be valid when calling kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy() from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the beginning of kvmppc_core_vcpu_free_pr(). This is consistent with kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr(). For the same reason, if kvmppc_core_vcpu_create_pr() returns an error then this means that kvmppc_mmu_init() was either not called or failed, in which case kvmppc_mmu_destroy() should not be called. Drop the line in the error path of kvm_arch_vcpu_create(). Fixes: ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/158455341029.178873.15248663726399374882.stgit@bahia.lan
2020-03-19arm64: compat: Fix syscall number of compat_clock_getresVincenzo Frascino1-1/+1
The syscall number of compat_clock_getres was erroneously set to 247 (__NR_io_cancel!) instead of 264. This causes the vDSO fallback of clock_getres() to land on the wrong syscall for compat tasks. Fix the numbering. Cc: <stable@vger.kernel.org> Fixes: 53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-19arm64: kpti: Fix "kpti=off" when KASLR is enabledWill Deacon2-5/+5
Enabling KASLR forces the use of non-global page-table entries for kernel mappings, as this is a decision that we have to make very early on before mapping the kernel proper. When used in conjunction with the "kpti=off" command-line option, it is possible to use non-global kernel mappings but with the kpti trampoline disabled. Since commit 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision"), arm64_kernel_unmapped_at_el0() reflects only the use of non-global mappings and does not take into account whether the kpti trampoline is enabled. This breaks context switching of the TPIDRRO_EL0 register for 64-bit tasks, where the clearing of the register is deferred to the ret-to-user code, but it also breaks the ARM SPE PMU driver which helpfully recommends passing "kpti=off" on the command line! Report whether or not KPTI is actually enabled in arm64_kernel_unmapped_at_el0() and check the 'arm64_use_ng_mappings' global variable directly when determining the protection flags for kernel mappings. Cc: Mark Brown <broonie@kernel.org> Reported-by: Hongbo Yao <yaohongbo@huawei.com> Tested-by: Hongbo Yao <yaohongbo@huawei.com> Fixes: 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision") Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: smp: fix crash_smp_send_stop() behaviourCristian Marussi1-2/+6
On a system configured to trigger a crash_kexec() reboot, when only one CPU is online and another CPU panics while starting-up, crash_smp_send_stop() will fail to send any STOP message to the other already online core, resulting in fail to freeze and registers not properly saved. Moreover even if the proper messages are sent (case CPUs > 2) it will similarly fail to account for the booting CPU when executing the final stop wait-loop, so potentially resulting in some CPU not been waited for shutdown before rebooting. A tangible effect of this behaviour can be observed when, after a panic with kexec enabled and loaded, on the following reboot triggered by kexec, the cpu that could not be successfully stopped fails to come back online: [ 362.291022] ------------[ cut here ]------------ [ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 362.292400] Modules linked in: [ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105 [ 362.293136] Hardware name: Foundation-v8A (DT) [ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 362.294063] pc : has_cpuid_feature+0xf0/0x348 [ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 362.294280] sp : ffff800011b1bf60 [ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000 [ 362.294534] x27: 0000000000000000 x26: 0000000000000000 [ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c [ 362.294718] x23: 0000000000000000 x22: 0000000000000000 [ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00 [ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004 [ 362.294987] x17: 0000000000000000 x16: 0000000000000000 [ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c [ 362.295165] x13: 0000000000000384 x12: 0000000000000000 [ 362.295251] x11: 0000000000000000 x10: 00400032b5503510 [ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204 [ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480 [ 362.296011] Call trace: [ 362.296257] has_cpuid_feature+0xf0/0x348 [ 362.296350] verify_local_elf_hwcaps+0x84/0xe8 [ 362.296424] check_local_cpu_capabilities+0x44/0x128 [ 362.296497] secondary_start_kernel+0xf4/0x188 [ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 362.298652] SMP: stopping secondary CPUs [ 362.300615] Starting crashdump kernel... [ 362.301168] Bye! [ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0] [ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020 [ 0.000000] Machine model: Foundation-v8A [ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled ..... [ 0.138024] rcu: Hierarchical SRCU implementation. [ 0.153472] its@2f020000: unable to locate ITS domain [ 0.154078] its@2f020000: Unable to locate ITS domain [ 0.157541] EFI services will not be available. [ 0.175395] smp: Bringing up secondary CPUs ... [ 0.209182] psci: failed to boot CPU1 (-22) [ 0.209377] CPU1: failed to boot: -22 [ 0.274598] Detected PIPT I-cache on CPU2 [ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000 [ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0] [ 0.369053] Detected PIPT I-cache on CPU3 [ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000 [ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0] [ 0.401707] smp: Brought up 1 node, 3 CPUs [ 0.404057] SMP: Total of 3 processors activated. Make crash_smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way the right number of STOPs is sent and all other stopped-cores's registers are properly saved. Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17arm64: smp: fix smp_send_stop() behaviourCristian Marussi1-3/+14
On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-16Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-4/+8
Pull ARM fixes from Russell King: - allow use of ARMv8 arch timer in 32-bit VDSO - rename missed .fixup section - fix kbuild issue with stack protector GCC plugin * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8961/2: Fix Kbuild issue caused by per-task stack protector GCC plugin ARM: 8958/1: rename missed uaccess .fixup section ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()
2020-03-15Merge tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-6/+26
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Map EFI runtime service data as encrypted when SEV is enabled. Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode. - Remove the warning in the vector management code which triggered when a managed interrupt affinity changed outside of a CPU hotplug operation. The warning was correct until the recent core code change that introduced a CPU isolation feature which needs to migrate managed interrupts away from online CPUs under certain conditions to achieve the isolation" * tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vector: Remove warning on managed interrupt migration x86/ioremap: Map EFI runtime services data as encrypted for SEV
2020-03-15Merge tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-10/+7
Pull perf fixes from Thomas Gleixner: "A pile of perf fixes: Kernel side: - AMD uncore driver: Replace the open coded sanity check with the core variant, which provides the correct error code and also leaves a hint in dmesg Tooling: - Fix the stdio input handling with glibc versions >= 2.28 - Unbreak the futex-wake benchmark which was reduced to 0 test threads due to the conversion to cpumaps - Initialize sigaction structs before invoking sys_sigactio() - Plug the mapfile memory leak in perf jevents - Fix off by one relative directory includes - Fix an undefined string comparison in perf diff" * tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag tools: Fix off-by 1 relative directory includes perf jevents: Fix leak of mapfile memory perf bench: Clear struct sigaction before sigaction() syscall perf bench futex-wake: Restore thread count default to online CPU count perf top: Fix stdio interface input handling with glibc 2.28+ perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare perf symbols: Don't try to find a vmlinux file when looking for kernel modules perf bench: Share some global variables to fix build with gcc 10 perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files perf env: Do not return pointers to local variables perf tests bp_account: Make global variable static
2020-03-15Merge tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-6/+12
Pull RAS fixes from Thomas Gleixner: "Two RAS related fixes: - Shut down the per CPU thermal throttling poll work properly when a CPU goes offline. The missing shutdown caused the poll work to be migrated to a unbound worker which triggered warnings about the usage of smp_processor_id() in preemptible context - Fix the PPIN feature initialization which missed to enable the functionality when PPIN_CTL was enabled but the MSR locked against updates" * tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix logic and comments around MSR_PPIN_CTL x86/mce/therm_throt: Undo thermal polling properly on CPU offline
2020-03-14Merge tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds9-26/+19
Pull ARC fixes from Vineet Gupta: - Fix __ALIGN_STR and __ALIGN to not use default junk padding - Misc Kconfig cleanups, header updates * tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: define __ALIGN_STR and __ALIGN symbols for ARC ARC: show_regs: reduce lines of output ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h> ARC: fpu: fix randconfig build error reported by 0-day test service ARC: fix some Kconfig typos ARC: Cleanup old Kconfig IO scheduler options
2020-03-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-13/+48
Pull kvm fixes from Paolo Bonzini: "Bugfixes for x86 and s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1 KVM: s390: Also reset registers in sync regs for initial cpu reset KVM: fix Kconfig menu text for -Werror KVM: x86: remove stale comment from struct x86_emulate_ctxt KVM: x86: clear stale x86_emulate_ctxt->intercept value KVM: SVM: Fix the svm vmexit code for WRMSR KVM: X86: Fix dereference null cpufreq policy
2020-03-14Merge branch 'kvm-null-pointer-fix' into kvm-masterPaolo Bonzini1-2/+3
2020-03-14KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAsVitaly Kuznetsov1-2/+3
When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter with EVMCS GPA = 0 the host crashes because the evmcs_gpa != vmx->nested.hv_evmcs_vmptr condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will happen on vmx->nested.hv_evmcs pointer dereference. Another problematic EVMCS ptr value is '-1' but it only causes host crash after nested_release_evmcs() invocation. The problem is exactly the same as with '0', we mistakenly think that the EVMCS pointer hasn't changed and thus nested.hv_evmcs_vmptr is valid. Resolve the issue by adding an additional !vmx->nested.hv_evmcs check to nested_vmx_handle_enlightened_vmptrld(), this way we will always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL and this is supposed to catch all invalid EVMCS GPAs. Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs() to be consistent with initialization where we don't currently set hv_evmcs_vmptr to '-1'. Cc: stable@vger.kernel.org Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-14Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-masterPaolo Bonzini1-1/+17
KVM: s390: Fully do the CPU resets as intended With 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") we clarified the meaning of the reset ioctl to fully reset the CPU and not only the parts that can not be handled by userspace. Turns out that we missed some parts.
2020-03-14KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirectNitesh Narayan Lal1-2/+5
Previously all fields of structure kvm_lapic_irq were not initialized before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause an issue when any of those fields are used for processing a request. For example not initializing the msi_redir_hint field before passing to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of kvm_apic_map_get_dest_lapic(). This will specifically happen when the kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage value of msi_redir_hint, which should not happen as the request belongs to APIC fixed delivery mode and we do not want to deliver the interrupt only to the lowest priority candidate. This patch initializes all the fields of kvm_lapic_irq based on the values of ioapic redirect_entry object before passing it on to kvm_bitmap_or_dest_vcpus(). Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs") Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> [Set level to false since the value doesn't really matter. Suggested by Vitaly Kuznetsov. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-14KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1Sean Christopherson1-2/+14
Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1 is not supported[*], i.e. intercepting ENCLS to inject a #UD is unnecessary. Avoiding ENCLS-exiting even when it is reported as supported by the CPU works around a reported issue where SGX is "hard" disabled after an S3 suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control are enumerated as unsupported. While the root cause of the S3 issue is unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a workaround for what is most likely a hardware or firmware issue. As a bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and vmcs02. Note, SGX must be disabled in BIOS to take advantage of this workaround [*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are cleared. Soft disabled meaning disabling SGX without clearing the primary CPUID bit (in leaf 0x7) and without poking into non-SGX CPU paths, e.g. for the VMCS controls. Fixes: 0b665d304028 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest") Reported-by: Toni Spets <toni.spets@iki.fi> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-13x86/vector: Remove warning on managed interrupt migrationPeter Xu1-6/+8
The vector management code assumes that managed interrupts cannot be migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE() which triggers when a managed interrupt vector association on a online CPU is cleared. The CPU offline code uses a different mechanism which cannot trigger this. This assumption is not longer correct because the new CPU isolation feature which affects the placement of managed interrupts must be able to move a managed interrupt away from an online CPU. There are two reasons why this can happen: 1) When the interrupt is activated the affinity mask which was established in irq_create_affinity_masks() is handed in to the vector allocation code. This mask contains all CPUs to which the interrupt can be made affine to, but this does not take the CPU isolation 'managed_irq' mask into account. When the interrupt is finally requested by the device driver then the affinity is checked again and the CPU isolation 'managed_irq' mask is taken into account, which moves the interrupt to a non-isolated CPU if possible. 2) The interrupt can be affine to an isolated CPU because the non-isolated CPUs in the calculated affinity mask are not online. Once a non-isolated CPU which is in the mask comes online the interrupt is migrated to this non-isolated CPU In both cases the regular online migration mechanism is used which triggers the WARN_ON_ONCE() in free_moved_vector(). Case #1 could have been addressed by taking the isolation mask into account, but that would require a massive code change in the activation logic and the eventual migration event was accepted as a reasonable tradeoff when the isolation feature was developed. But even if #1 would be addressed, #2 would still trigger it. Of course the warning in free_moved_vector() was overlooked at that time and the above two cases which have been discussed during patch review have obviously never been tested before the final submission. So keep it simple and remove the warning. [ tglx: Rewrote changelog and added a comment to free_moved_vector() ] Fixes: 11ea68f553e2 ("genirq, sched/isolation: Isolate from handling managed interrupts") Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com
2020-03-13powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOCChristophe Leroy1-7/+2
With CONFIG_KASAN_VMALLOC, new page tables are created at the time shadow memory for vmalloc area is unmapped. If some parts of the page table still have entries to the zero page shadow memory, the entries are wrongly marked RW. With CONFIG_KASAN_VMALLOC, almost the entire kernel address space is managed by KASAN. To make it simple, just create KASAN page tables for the entire kernel space at kasan_init(). That doesn't use much more space, and that's anyway already done for hash platforms. Fixes: 3d4247fcc938 ("powerpc/32: Add support of KASAN_VMALLOC") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ef5248fc1f496c6b0dfdb59380f24968f25f75c5.1583513368.git.christophe.leroy@c-s.fr
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-0/+2
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-12Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-3/+9
Pull crypto fix from Herbert Xu: "Fix a build problem with x86/curve25519" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/curve25519 - support assemblers with no adx support
2020-03-12perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flagKim Phillips1-10/+7
Enable the sampling check in kernel/events/core.c::perf_event_open(), which returns the more appropriate -EOPNOTSUPP. BEFORE: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (l3_request_g1.caching_l3_cache_accesses). /bin/dmesg | grep -i perf may provide additional information. With nothing relevant in dmesg. AFTER: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: l3_request_g1.caching_l3_cache_accesses: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fixes: c43ca5091a37 ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200311191323.13124-1-kim.phillips@amd.com
2020-03-11ARC: define __ALIGN_STR and __ALIGN symbols for ARCEugeniy Paltsev1-0/+2
The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-11ARC: show_regs: reduce lines of outputVineet Gupta1-15/+12
Before ------ | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | | [ECR ]: 0x00090000 => | [EFA ]: 0x00000000 | [ERET ]: 0x2004aa6c | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | [STAT32]: 0x80080a82 [IE U ] | BTA: 0x2004aa18 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 After ----- | CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12 | @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000 | ECR: 0x00090000 EFA: 0x00000000 ERET: 0x2004aa6c | STAT32: 0x80080a82 [IE U ] BTA: 0x2004aa18 | BLK: 0x2003b214 SP: 0x5ffff8a8 FP: 0x5ffff8fc | LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000 | r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000 | r03: 0x00000008 r04: 0xffffffff r05: 0x00000000 | r06: 0x00000000 r07: 0x00000000 r08: 0x00000087 | r09: 0x00000000 r10: 0x2010691c r11: 0x00000020 | r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68 | r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001 | r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948 | r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c | r24: 0x4008c2a8 r25: 0x2001f6e0 BTA: 0x2004aa18 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-03-11Merge tag 'mips_fixes_5.6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds2-17/+30
Pull MIPS fixes from Thomas Bogendoerfer: "A few MIPS fixes: - DT fixes for CI20 - Fix command line handling - Correct patchwork URL" * tag 'mips_fixes_5.6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Correct MIPS patchwork URL MIPS: DTS: CI20: fix interrupt for pcf8563 RTC MIPS: DTS: CI20: fix PMU definitions for ACT8600 MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling
2020-03-11x86/ioremap: Map EFI runtime services data as encrypted for SEVTom Lendacky1-0/+18
The dmidecode program fails to properly decode the SMBIOS data supplied by OVMF/UEFI when running in an SEV guest. The SMBIOS area, under SEV, is encrypted and resides in reserved memory that is marked as EFI runtime services data. As a result, when memremap() is attempted for the SMBIOS data, it can't be mapped as regular RAM (through try_ram_remap()) and, since the address isn't part of the iomem resources list, it isn't mapped encrypted through the fallback ioremap(). Add a new __ioremap_check_other() to deal with memory types like EFI_RUNTIME_SERVICES_DATA which are not covered by the resource ranges. This allows any runtime services data which has been created encrypted, to be mapped encrypted too. [ bp: Move functionality to a separate function. ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: <stable@vger.kernel.org> # 5.3 Link: https://lkml.kernel.org/r/2d9e16eb5b53dc82665c95c6764b7407719df7a0.1582645327.git.thomas.lendacky@amd.com
2020-03-11KVM: s390: Also reset registers in sync regs for initial cpu resetChristian Borntraeger1-1/+17
When we do the initial CPU reset we must not only clear the registers in the internal data structures but also in kvm_run sync_regs. For modern userspace sync_regs is the only place that it looks at. Fixes: 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-03-08Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds31-56/+81
Pull ARM SoC fixes from Olof Johansson: "We've been accruing these for a couple of weeks, so the batch is a bit bigger than usual. Largest delta is due to a led-bl driver that is added -- there was a miscommunication before the merge window and the driver didn't make it in. Due to this, the platforms needing it regressed. At this point, it seemed easier to add the new driver than unwind the changes. Besides that, there are a handful of various fixes: - AMD tee memory leak fix - A handful of fixlets for i.MX SCU communication - A few maintainers woke up and realized DEBUG_FS had been missing for a while, so a few updates of that. ... and the usual collection of smaller fixes to various platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits) ARM: socfpga_defconfig: Add back DEBUG_FS arm64: dts: socfpga: agilex: Fix gmac compatible ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED tee: amdtee: fix memory leak in amdtee_open_session() ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc ...
2020-03-07Merge tag 's390-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds2-2/+8
Pull s390 fixes from Vasily Gorbik: - Fix panic in gup_fast on large pud by providing an implementation of pud_write. This has been overlooked during migration to common gup code. - Fix unexpected write combining on PCI stores. * tag 's390-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Fix unexpected write combine on resource s390/mm: fix panic in gup_fast on large pud
2020-03-07Merge tag 'powerpc-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds4-6/+18
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.6: - One fix for a recent regression to our breakpoint/watchpoint code. - Another fix for our KUAP support, this time a missing annotation in a rarely used path in signal handling. - A fix for our handling of a CPU feature that effects the PMU, when booting guests in some configurations. - A minor fix to our linker script to explicitly include the .BTF section. Thanks to: Christophe Leroy, Desnes A. Nunes do Rosario, Leonardo Bras, Naveen N. Rao, Ravi Bangoria, Stefan Berger" * tag 'powerpc-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix missing KUAP disable in flush_coherent_icache() powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems powerpc: Include .BTF section powerpc/watchpoint: Don't call dar_within_range() for Book3S
2020-03-07MIPS: DTS: CI20: fix interrupt for pcf8563 RTCH. Nikolaus Schaller1-1/+4
Interrupts should not be specified by interrupt line but by gpio parent and reference. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-07MIPS: DTS: CI20: fix PMU definitions for ACT8600H. Nikolaus Schaller1-15/+24
There is a ACT8600 on the CI20 board and the bindings of the ACT8865 driver have changed without updating the CI20 device tree. Therefore the PMU can not be probed successfully and is running in power-on reset state. Fix DT to match the latest act8865-regulator bindings. Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-06arm64: dts: ls1043a: FMan erratum A050385Madalin Bucur1-0/+2
The LS1043A SoC is affected by the A050385 erratum stating that FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak thus stopping further packet processing. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06Merge tag 'riscv-for-linus-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds11-53/+65
Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of fixes that I would like to target for 5.6: - A pair of fixes to module loading, which we hope solve the last of the issues with module text being loaded too sparsely for our call relocations. - A Kconfig fix that disallows selecting memory models not supported by NOMMU. - A series of Kconfig updates to ease selecting the drivers necessary to run on QEMU's virt platform. - DTS updates for SiFive's HiFive Unleashed. - A fix to our seccomp support that avoids mangling restartable syscalls" * tag 'riscv-for-linus-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix seccomp reject syscall code path riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file RISC-V: Select Goldfish RTC driver for QEMU virt machine RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machine RISC-V: Enable QEMU virt machine support in defconfigs RISC-V: Add kconfig option for QEMU virt machine riscv: Fix range looking for kernel image memblock riscv: Force flat memory model with no-mmu riscv: Change code model of module to medany to improve data accessing riscv: avoid the PIC offset of static percpu data in module beyond 2G limits
2020-03-06Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-5/+15
Pull arm64 fixes from Will Deacon: "Here are another three arm64 fixes for 5.6, all pretty minor. Main thing is fixing a silly bug in the fsl_imx8_ddr PMU driver where we would zero the counters when disabling them. - Fix misreporting of ASID limit when KPTI is enabled - Fix busted NULL pointer checks for GICC structure in ACPI PMU code - Avoid nobbling the "fsl_imx8_ddr" PMU counters when disabling them" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: context: Fix ASID limit in boot messages drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition
2020-03-06arch/Kconfig: update HAVE_RELIABLE_STACKTRACE descriptionMiroslav Benes1-2/+3
save_stack_trace_tsk_reliable() is not the only function providing the reliable stack traces anymore. Architecture might define ARCH_STACKWALK which provides a newer stack walking interface and has arch_stack_walk_reliable() function. Update the description accordingly. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lkml.kernel.org/r/20200120154042.9934-1-mbenes@suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-05riscv: fix seccomp reject syscall code pathTycho Andersen3-21/+8
If secure_computing() rejected a system call, we were previously setting the system call number to -1, to indicate to later code that the syscall failed. However, if something (e.g. a user notification) was sleeping, and received a signal, we may set a0 to -ERESTARTSYS and re-try the system call again. In this case, seccomp "denies" the syscall (because of the signal), and we would set a7 to -1, thus losing the value of the system call we want to restart. Instead, let's return -1 from do_syscall_trace_enter() to indicate that the syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS or whatever. This commit fixes the user_notification_signal seccomp selftest on riscv to no longer hang. That test expects the system call to be re-issued after the signal, and it wasn't due to the above bug. Now that it is, everything works normally. Note that in the ptrace (tracer) case, the tracer can set the register values to whatever they want, so we still need to keep the code that handles out-of-bounds syscalls. However, we can drop the comment. We can also drop syscall_set_nr(), since it is no longer used anywhere, and the code that re-loads the value in a7 because of it. Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah1-0/+5
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel3-0/+4
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel3-0/+4
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel2-29/+2
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05RISC-V: Add kconfig option for QEMU virt machineAnup Patel1-0/+20
We add kconfig option for QEMU virt machine and select all required VIRTIO drivers using this kconfig option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-05KVM: fix Kconfig menu text for -WerrorJason A. Donenfeld1-1/+1
This was evidently copy and pasted from the i915 driver, but the text wasn't updated. Fixes: 4f337faf1c55 ("KVM: allow disabling -Werror") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-05crypto: x86/curve25519 - support assemblers with no adx supportJason A. Donenfeld2-3/+9
Some older version of GAS do not support the ADX instructions, similarly to how they also don't support AVX and such. This commit adds the same build-time detection mechanisms we use for AVX and others for ADX, and then makes sure that the curve25519 library dispatcher calls the right functions. Reported-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-03-05powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()Michael Ellerman1-0/+2
Stefan reported a strange kernel fault which turned out to be due to a missing KUAP disable in flush_coherent_icache() called from flush_icache_range(). The fault looks like: Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009) BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00 Faulting instruction address: 0xc00000000007232c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40 #79 NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000 REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40) MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000 CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0 GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00 GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80 GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000 GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000 GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20 GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80 GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00 NIP flush_icache_range+0x5c/0x80 LR handle_rt_signal64+0x95c/0xc2c Call Trace: 0xc000001e11093d90 (unreliable) handle_rt_signal64+0x93c/0xc2c do_notify_resume+0x310/0x430 ret_from_except_lite+0x70/0x74 Instruction dump: 409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d 60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070 This path through handle_rt_signal64() to setup_trampoline() and flush_icache_range() is only triggered by 64-bit processes that have unmapped their VDSO, which is rare. flush_icache_range() takes a range of addresses to flush. In flush_coherent_icache() we implement an optimisation for CPUs where we know we don't actually have to flush the whole range, we just need to do a single icbi. However we still execute the icbi on the user address of the start of the range we're flushing. On CPUs that also implement KUAP (Power9) that leads to the spurious fault above. We should be able to pass any address, including a kernel address, to the icbi on these CPUs, which would avoid any interaction with KUAP. But I don't want to make that change in a bug fix, just in case it surfaces some strange behaviour on some CPU. So for now just disable KUAP around the icbi. Note the icbi is treated as a load, so we allow read access, not write as you'd expect. Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200303235708.26004-1-mpe@ellerman.id.au
2020-03-04riscv: Fix range looking for kernel image memblockAlexandre Ghiti1-1/+1
When looking for the memblock where the kernel lives, we should check that the memory range associated to the memblock entirely comprises the kernel image and not only intersects with it. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04riscv: Force flat memory model with no-mmuDamien Le Moal1-0/+1
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-04Merge tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixesOlof Johansson1-0/+1
ARM: socfpga_defconfig: add back DEBUGFS - Add back DEBUG_FS for socfpga_defconfig * tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga_defconfig: Add back DEBUG_FS Link: https://lore.kernel.org/r/20200304101917.1243-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>