| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SVE_PT_REGS_OFFSET is supposed to indicate the offset for skipping
over the ptrace NT_ARM_SVE header (struct user_sve_header) to the
start of the SVE register data proper.
However, currently SVE_PT_REGS_OFFSET is defined in terms of struct
sve_context, which is wrong: that structure describes the SVE
header in the signal frame, not in the ptrace regset.
This patch fixes the definition to use the ptrace header structure
struct user_sve_header instead.
By good fortune, the two structures are the same size anyway, so
there is no functional or ABI change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In commit 05a4ab823983 ("powerpc/uaccess: fix warning/error with
access_ok()") an attempt was made to remove a warning by referencing
the variable `type`. However in commit 96d4f267e40f ("Remove 'type'
argument from access_ok() function") the variable `type` has been
removed, breaking the build:
arch/powerpc/include/asm/uaccess.h:66:32: error: ‘type’ undeclared (first use in this function)
This essentially reverts commit 05a4ab823983 ("powerpc/uaccess: fix
warning/error with access_ok()") to fix the error.
Fixes: 96d4f267e40f ("Remove 'type' argument from access_ok() function")
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[mpe: Reword change log slightly.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We have a fix to apply on top of commit 96d4f267e40f ("Remove 'type'
argument from access_ok() function"), so merge master to get it.
|
|
Use the standard obj-$(CONFIG_...) syntex. The behavior is still the
same.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Adding a function inside a WARN_ON() didn't close the WARN_ON parathesis.
Link: http://lkml.kernel.org/r/201901020958.28Mzbs0O%fengguang.wu@intel.com
Cc: linux-sh@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: cec8d0e7f06e ("sh: ftrace: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When KASLR is enabled (CONFIG_RANDOMIZE_BASE=y), the top 4K of kernel
virtual address space may be mapped to physical addresses despite being
reserved for ERR_PTR values.
Fix the randomization of the linear region so that we avoid mapping the
last page of the virtual address space.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: liyueyi <liyueyi@live.com>
[will: rewrote commit message; merged in suggestion from Ard]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In commit:
3b7142752e4bee15 ("arm64: convert native/compat syscall entry to C")
... we moved the syscall invocation code from assembly to C, but left
behind a number of register aliases which are now unused.
Let's remove them before they confuse someone.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
For arm64: updates for 4.21, there is a compilation error:
arch/arm64/kernel/head.S: Assembler messages:
arch/arm64/kernel/head.S:824: Error: missing ')'
arch/arm64/kernel/head.S:824: Error: missing ')'
arch/arm64/kernel/head.S:824: Error: missing ')'
arch/arm64/kernel/head.S:824: Error: unexpected characters following instruction at operand 2 -- `mov x2,#(2)|(2U<<(8))'
scripts/Makefile.build:391: recipe for target 'arch/arm64/kernel/head.o' failed
make[1]: *** [arch/arm64/kernel/head.o] Error 1
GCC version is gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.10) 5.4.0 20160609
Let's fix it using the UL() macro.
Fixes: 66f16a24512f ("arm64: smp: Rework early feature mismatched detection")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
[will: consistent use of UL() for all shifts in asm constants]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Pull UML updates from Richard Weinberger:
- DISCARD support for our block device driver
- Many TLB flush optimizations
- Various smaller fixes
- And most important, Anton agreed to help me maintaining UML
* 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove obsolete reenable_XX calls
um: writev needs <sys/uio.h>
Add Anton Ivanov to UML maintainers
um: remove redundant generic-y
um: Optimize Flush TLB for force/fork case
um: Avoid marking pages with "changed protection"
um: Skip TLB flushing where not needed
um: Optimize TLB operations v2
um: Remove unnecessary faulted check in uaccess.c
um: Add support for DISCARD in the UBD Driver
um: Remove unsafe printks from the io thread
um: Clean-up command processing in UML UBD driver
um: Switch to block-mq constants in the UML UBD driver
um: Make GCOV depend on !KCOV
um: Include sys/uio.h to have writev()
um: Add HAVE_DEBUG_BUGVERBOSE
um: Update maintainers file entry
|
|
Pull s390 updates from Martin Schwidefsky:
- A larger update for the zcrypt / AP bus code:
+ Update two inline assemblies in the zcrypt driver to make gcc happy
+ Add a missing reply code for invalid special commands for zcrypt
+ Allow AP device reset to be triggered from user space
+ Split the AP scan function into smaller, more readable functions
- Updates for vfio-ccw and vfio-ap
+ Add maintainers and reviewer for vfio-ccw
+ Include facility.h in vfio_ap_drv.c to avoid fragile include chain
+ Simplicy vfio-ccw state machine
- Use the common code version of bust_spinlocks
- Make use of the DEFINE_SHOW_ATTRIBUTE
- Fix three incorrect file permissions in the DASD driver
- Remove bit spin-lock from the PCI interrupt handler
- Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code
* tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: rework ap scan bus code
s390/zcrypt: make sysfs reset attribute trigger queue reset
s390/pci: fix sleeping in atomic during hotplug
s390/pci: remove bit_lock usage in interrupt handler
s390/drivers: fix proc/debugfs file permissions
s390: convert to DEFINE_SHOW_ATTRIBUTE
MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer
vfio: ccw: Merge BUSY and BOXED states
s390: use common bust_spinlocks()
s390/zcrypt: improve special ap message cmd handling
s390/ap: rework assembler functions to use unions for in/out register variables
s390: vfio-ap: include <asm/facility> for test_facility()
|
|
Commit 885872b722b7 ("MIPS: Octeon: Add Octeon III CN7xxx
interface detection") added RGMII interface detection for OCTEON III,
but it results in the following logs:
[ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe
[ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe
The current RGMII routines are valid only for older OCTEONS that
use GMX/ASX hardware blocks. On later chips AGL should be used,
but support for that is missing in the mainline. Until that is added,
mark the interface as disabled.
Fixes: 885872b722b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # 4.7+
|
|
- Use devm resource parser in mediatek (Honghui Zhang)
- Remove unused mediatek "num-lanes" DT property (Honghui Zhang)
* remotes/lorenzo/pci/mediatek:
arm64: dts: mt7622: Remove un-used property for PCIe
arm: dts: mt7623: Remove un-used property for PCIe
dt-bindings: PCI: MediaTek: Remove un-used property
PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
PCI: mediatek: Use devm_of_pci_get_host_bridge_resources() to parse DT
|
|
- Skip VF scanning on powerpc, which does this in firmware (Sebastian
Ott)
* pci/virtualization:
s390/pci: skip VF scanning
PCI/IOV: Add flag so platforms can skip VF scanning
PCI/IOV: Factor out sriov_add_vfs()
|
|
Pull seccomp updates from James Morris:
- Add SECCOMP_RET_USER_NOTIF
- seccomp fixes for sparse warnings and s390 build (Tycho)
* 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
seccomp, s390: fix build for syscall type change
seccomp: fix poor type promotion
samples: add an example of seccomp user trap
seccomp: add a return code to trap to userspace
seccomp: switch system call argument type to void *
seccomp: hoist struct seccomp_data recalculation higher
|
|
Pull integrity updates from James Morris:
"In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load syscall.
Different signature verification methods exist for verifying the
kexec'ed kernel image. This adds additional support in IMA to prevent
loading unsigned kernel images via the kexec_load syscall,
independently of the IMA policy rules, based on the runtime "secure
boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
integrity: Remove references to module keyring
ima: Use inode_is_open_for_write
ima: Support platform keyring for kernel appraisal
efi: Allow the "db" UEFI variable to be suppressed
efi: Import certificates from UEFI Secure Boot
efi: Add an EFI signature blob parser
efi: Add EFI signature data types
integrity: Load certs to the platform keyring
integrity: Define a trusted platform keyring
selftests/ima: kexec_load syscall test
ima: don't measure/appraise files on efivarfs
x86/ima: retry detecting secure boot mode
docs: Extend trusted keys documentation for TPM 2.0
x86/ima: define arch_get_ima_policy() for x86
ima: add support for arch specific policies
ima: refactor ima_init_policy()
ima: prevent kexec_load syscall based on runtime secureboot flag
x86/ima: define arch_ima_get_secureboot
integrity: support new struct public_key_signature encoding field
|
|
This adds basic perf support for all C-SKY CPUs. Hardware events are
only supported by 807/810/860.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
|
|
Set the flag to skip scanning for VFs after SR-IOV enablement. VF creation
will be triggered by the hotplug code.
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Pull IOMMU updates from Joerg Roedel:
- Page table code for AMD IOMMU now supports large pages where smaller
page-sizes were mapped before. VFIO had to work around that in the
past and I included a patch to remove it (acked by Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would never
work as modules anyway.
- Work to unify the the iommu-related pointers in 'struct device' into
one pointer. This work is not finished yet, but will probably be in
the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
iommu: Check for iommu_ops == NULL in iommu_probe_device()
ACPI/IORT: Don't call iommu_ops->add_device directly
iommu/of: Don't call iommu_ops->add_device directly
iommu: Consolitate ->add/remove_device() calls
iommu/sysfs: Rename iommu_release_device()
dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
xhci: Use device_iommu_mapped()
powerpc/iommu: Use device_iommu_mapped()
ACPI/IORT: Use device_iommu_mapped()
iommu/of: Use device_iommu_mapped()
driver core: Introduce device_iommu_mapped() function
iommu/tegra: Use helper functions to access dev->iommu_fwspec
iommu/qcom: Use helper functions to access dev->iommu_fwspec
iommu/of: Use helper functions to access dev->iommu_fwspec
iommu/mediatek: Use helper functions to access dev->iommu_fwspec
iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
iommu/dma: Use helper functions to access dev->iommu_fwspec
iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
ACPI/IORT: Use helper functions to access dev->iommu_fwspec
iommu: Introduce wrappers around dev->iommu_fwspec
...
|
|
Pull kgdb updates from Daniel Thompson:
"Mostly clean ups although while Doug's was chasing down a odd lockdep
warning he also did some work to improved debugger resilience when
some CPUs fail to respond to the round up request.
The main changes are:
- Fixing a lockdep warning on architectures that cannot use an NMI
for the round up plus related changes to make CPU round up and all
CPU backtrace more resilient.
- Constify the arch ops tables
- A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope (and
directly related to kgdb). Didn't get comprehensive acks but all
impacted maintainers were Cc:ed in good time"
* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
mips/kgdb: prepare arch_kgdb_ops for constness
kdb: use bool for binary state indicators
kdb: Don't back trace on a cpu that didn't round up
kgdb: Don't round up a CPU that failed rounding up before
kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
kgdb: Remove irq flags from roundup
|
|
Pull OpenRISC update from Stafford Horne:
"Just one change for 4.21: Update comments for name change or32 -> or1k
from Geert Uytterhoeven"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix broken paths to arch/or32
|
|
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- new %ptR printk format
- rename core files
- allow registration of multiple nvmem devices
New driver:
- i.MX system controller RTC
Driver updates:
- abx80x: handle voltage ioctls, correct binding doc
- m41t80: correct month in alarm reads
- pcf85363: add pcf85263 support
- pcf8523: properly handle battery low flag
- s3c: limit alarm to one year in the future as ALMYEAR is broken
- sun6i: rework clock output binding"
* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
rtc: rename core files
rtc: nvmem: fix possible use after free
rtc: add i.MX system controller RTC support
dt-bindings: fsl: scu: add rtc binding
rtc: pcf2123: Add Microcrystal rv2123
rtc: class: reimplement devm_rtc_device_register
rtc: enforce rtc_timer_init private_data type
rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
rtc: pcf85363: Add support for NXP pcf85263 rtc
dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
rtc: pcf8523: don't return invalid date when battery is low
dt-bindings: rtc: use a generic node name for ds1307
PM: Switch to use %ptR
m68k/mac: Switch to use %ptR
Input: hp_sdc_rtc - Switch to use %ptR
rtc: tegra: Switch to use %ptR
rtc: s5m: Switch to use %ptR
rtc: s3c: Switch to use %ptR
rtc: rx8025: Switch to use %ptR
rtc: rx6110: Switch to use %ptR
...
|
|
Pull watchdog updates from Wim Van Sebroeck:
- add TQ-Systems TQMX86 watchdog driver
- add Qualcomm PM8916 watchdog driver
- w83627hf_wdt: add quirk for Inves system
- renesas_wdt: several improvements and document r8a774c0 support
- mena21_wdt, mtx-1: Convert to use GPIO descriptor
- bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
- documentation: add PM usage and kernel-api: don't reference removed functions
- update bindings for MT7629 SoC
- several small fixes
* tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
watchdog: tqmx86: Add watchdog driver for the IO controller
dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
watchdog: docs: kernel-api: don't reference removed functions
watchdog: add documentation for PM usage
watchdog: mtx-1: Convert to use GPIO descriptor
watchdog: mena21_wdt: Convert to GPIO descriptors
dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
watchdog: Add pm8916 watchdog driver
dt-bindings: watchdog: update bindings for MT7629 SoC
watchdog: renesas_wdt: don't keep timer value during suspend/resume
watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
watchdog: asm9260_wdt: make array mode_name static, shrinks object size
watchdog/hpwdt: Update driver version.
watchdog/hpwdt: Do not claim unsupported hardware
watchdog/hpwdt: Exclude via blacklist
Watchdog: remove outdated comment
watchdog: w83627hf_wdt: Add quirk for Inves system
watchdog: cpwd: add of_node_put()
watchdog: renesas_wdt: don't set divider while watchdog is running
...
|
|
Pull ARM SoC defconfig updates from Olof Johansson:
"Most changes here are to enable new drivers and platforms in the
various configs that affect them. Most of these have been covered and
described in the other branches, we mostly keep defconfig separate to
avoid conflicts between SoC/dt/driver updates that they otherwise
would be grouped with.
One thing worth mentioning here is that OMAP changes from using their
own UART driver, to 8250, for the multi_v7_defconfig shared config on
32-bit. This means that the console is now named ttyS* instead of
ttyO*. This change was already done for omap2_defconfig a while back,
so most users of these configs have either already updated, or can
easily follow the same patterns as they did at that time. This makes
platform support slightly easier for distros, since they no longer
need to keep track of a separate console prefix for these platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
arm64: defconfig: Regenerate for v4.20
ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: multi_v7_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: exynos_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
ARM: imx_v6_v7_defconfig: add imx7ulp support
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
arm64: defconfig: Enable GCC and PINCTRL for MSM8998
arm64: defconfig: Enable core Qualcomm SDM845 options
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
arm64: defconfig: Enable some qcom remoteproc configs
arm64: defconfig: Enable QCS404 configs
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
ARM: imx_v6_v7_defconfig: Enable BT_BNEP
...
|
|
Pull ARM Device-tree updates from Olof Johansson:
"As usual, this is where the bulk of our changes end up landing each
merge window.
The individual updates are too many to enumerate, many many platforms
have seen additions of device descriptions such that they are
functionally more complete (in fact, this is often the bulk of updates
we see).
Instead I've mostly focused on highlighting the new platforms below as
they are introduced. Sometimes the introduction is of mostly a
fragment, that later gets filled in on later releases, and in some
cases it's near-complete platform support. The latter is more common
for derivative platforms that already has similar support in-tree.
Two SoCs are slight outliers from the usual range of additions.
Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
in the Lychee Pi Nano platform. At the other end is NXP Layerscape
LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
aimed at infrastructure/networking.
TI updates stick out in the diff stats too, in particular because they
have moved the description of their L4 on-chip interconnect to
devicetree, which opens up for removal of even more of their
platform-specific 'hwmod' description tables over the next few
releases.
SoCs:
- Qualcomm QCS404 (4x Cortex-A53)
- Allwinner T3 (rebranded R40) and f1c100s (armv5)
- NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
- NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)
New platforms:
- Rockchip: Gru Scarlet (RK3188 Tablet)
- Amlogic: Phicomm N1 (S905D), Libretech S805-AC
- Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
- Qualcomm: QCS404 base platform and EVB
- Qualcomm: Remove of Arrow SD600
- PXA: First PXA3xx DT board: Raumfeld
- Aspeed: Facebook Backpack-CMM BMC
- Renesas iWave G20D-Q7 (RZ/G1N)
- Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
- Allwinner Emlid Neutis N5, Mapleboard MP130
- Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
- i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
- VF610: Liebherr's BK4 device, ZII SCU4 AIB board
- i.MX7D PICO Hobbit baseboard
- i.MX7ULP EVK board
- NXP LX2160AQDS and LX2160ARDB boards
Other:
- Coresight binding updates across the board
- CPU cooling maps updates across the board"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
ARM: dts: suniv: Fix improper bindings include patch
ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
ARM: dts: suniv: Fix improper bindings include patch
arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
arm64: dts: Remove unused properties from FSL QSPI driver nodes
ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
ARM: dts: Remove unused properties from FSL QSPI driver nodes
arm64: dts: ti: k3-am654: Enable main domain McSPI0
arm64: dts: ti: k3-am654: Add McSPI DT nodes
arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
arm64: dts: ti: k3-am65-main: Add ECAP PWM node
arm64: dts: ti: k3-am654-base-board: Add I2C nodes
arm64: dts: ti: am654-base-board: Add pinmux for main uart0
arm64: dts: ti: k3-am65: Add pinctrl regions
dt-bindings: pinctrl: k3: Introduce pinmux definitions
ARM: dts: exynos: Specify I2S assigned clocks in proper node
ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
...
|
|
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
|
|
Pull arm SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
console setups
- SoCFPGA adds explicit selection of ARM errata and removes some
unused code
This also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: omap2: avoid section mismatch warning
ARM: tegra: avoid section mismatch warning
ARM: ks8695: fix section mismatch warning
ARM: pxa: avoid section mismatch warning
ARM: mmp: fix pxa168_device_usb_phy use on aspenite
ARM: mmp: fix timer_init calls
ARM: OMAP1: fix USB configuration for device-only setups
ARM: OMAP1: add MMC configuration for Palm Tungsten E
ARM: imx: fix dependencies on imx7ulp
ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
ARM: imx: add initial support for imx7ulp
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: davinci: da850-evm: remove unnecessary include
...
|
|
The bcm2835-thermal driver was added with commit ac178e4280e6
("ARM64: bcm2835: add thermal driver to default config"). Unfortunately
this was accidentally dropped by commit eb1e6716cc9c
("arm64: defconfig: sync with savedefconfig"). So enable the driver again.
Fixes: eb1e6716cc9c ("arm64: defconfig: sync with savedefconfig")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Highlights:
-----------
- Following pen_release and boot_lock cleanup initiated by
Russell King, .smp_prepare_cpus and .smp_boot_secondary STi callbacks
must be reworked to keep secondary CPU's bringup.
* tag 'sti-soc-for-v4.21-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: sti: remove pen_release and boot_lock
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Samsung DTS ARM64 changes for v4.21, part 2
Add IMEM clock controller (for Security SubSystem) and Bluetooth chip to
Exynos5433 TM2(e) boards.
* tag 'samsung-dt64-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: exynos: Add IMEM clock controller to Exynos5433
arm64: dts: exynos: Add all CPUs in cooling maps
arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Samsung DTS ARM changes for v4.21, part 2
1. Add missing CPUs in cooling maps for Odroid X2 (missed in previous
round of fixups).
2. Fix clock configuration in audio subsystem on Odroid XU3/XU4.
* tag 'samsung-dt-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Specify I2S assigned clocks in proper node
ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
ARM: dts: exynos: remove display-port node from Arndale
ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4
ARM: dts: s5pv210: Add s5p-jpeg codec node.
ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module
ARM: dts: exynos: Add all CPUs in cooling maps
ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI
ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1
ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4
ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1
ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1
ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1
ARM: dts: exynos: Add missing clocks to RTC node for Arndale board
ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core
ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add interrupt support for UART in RDA Micro RDA8810PL SoC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add timer support for RDA Micro RDA8810PL SoC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add initial devicetree for Orange Pi i96 board from Xunlong. It
is one of the 96Boards IoT Edition board.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add initial devicetree support for OrangePi 2G IoT board from Xunlong.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add initial device tree for RDA8810PL SoC from RDA Microelectronics.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Introduce ARCH_RDA and mach-rda for RDA Micro SoCs.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
i.MX8MQ device tree support for 4.21:
- It contains the initial device tree support for i.MX8MQ - the first
ARM64 i.MX processor. It features a quad Cortex-A53 core that
operates at speeds of up to 1.3 GHz, a Cortex-M4 core for
low-power processing, a DRAM controller that supports 32-bit/16-bit
LPDDR4/DDR4/DDR3L memory, and hardware acceleration for 4K video
playback.
- A couple of patches from Baruch that add watchdog device for i.MX8MQ
enable it for imx8mq-evk board.
* tag 'imx8mq-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
arm64: add basic Kconfig symbols for i.MX8
arm64: dts: ls1046a: add qdma device tree nodes
arm64: dts: ls1043a: add qdma device tree nodes
arm64: dts: ls1088a: Add missing dma-ranges property
arm64: dts: ls1088a: Move fsl-mc node
arm64: dts: fsl: Add all CPUs in cooling maps
arm64: dts: Add support for NXP LS1028A SoC
arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
arm64: dts: fsl: Add the status property disable PCIe
arm64: dts: ls1012a: Add FRWY-LS1012A board support
dt-bindings: Add binding for i.MX8MQ CCM
arm64: dts: add LX2160AQDS board support
arm64: dts: add LX2160ARDB board support
arm64: dts: add QorIQ LX2160A SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Merge in fixes here, since the last batch didn't make it in before the
release of 4.20, and we might as well group them with this set of
patches.
* fixes: (822 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
ARM: imx: update the cpu power up timing setting on i.mx6sx
Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
ARM: dts: imx7d-pico: Describe the Wifi clock
ARM: dts: realview: Fix some more duplicate regulator nodes
MAINTAINERS: update entry for MMP platform
ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
MAINTAINERS: mediatek: Update SoC entry
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
+ Linux 4.20-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull tracing updates from Steven Rostedt:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure. This
will allow for multiple users of hooking onto functions to get the
callback (return) of the function. This is the ground work for having
kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently is
a similar function strstart() that is used in a few places, but only
returns a bool and not a length. These instances will be removed in
the future to use str_has_prefix() instead.
- A few other various clean ups as well.
* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
tracing: Use the return of str_has_prefix() to remove open coded numbers
tracing: Have the historgram use the result of str_has_prefix() for len of prefix
tracing: Use str_has_prefix() instead of using fixed sizes
tracing: Use str_has_prefix() helper for histogram code
string.h: Add str_has_prefix() helper function
tracing: Make function ‘ftrace_exports’ static
tracing: Simplify printf'ing in seq_print_sym
tracing: Avoid -Wformat-nonliteral warning
tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
tracing: Add hist trigger comments for variable-related fields
tracing: Remove hist trigger synth_var_refs
tracing: Use hist trigger's var_ref array to destroy var_refs
tracing: Remove open-coding of hist trigger var_ref management
tracing: Use var_refs[] for hist trigger reference checking
tracing: Change strlen to sizeof for hist trigger static strings
tracing: Remove unnecessary hist trigger struct field
tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
seq_buf: Use size_t for len in seq_buf_puts()
seq_buf: Make seq_buf_puts() null-terminate the buffer
arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
...
|
|
Pull alpha architecture updates from Matt Turner:
"A few small changes for alpha as well as the new system call table
generation support from Firoz Khan"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: Remove some unused variables
alpha: rtc: simplify alpha_rtc_init
alpha: Fix a typo on ptrace.h
alpha: fix spelling mistake QSD_PORT_ACTUVE -> QSD_PORT_ACTIVE
alpha: generate uapi header and syscall table header files
alpha: add system call table generation support
alpha: add __NR_syscalls along with NR_SYSCALLS
alpha: remove CONFIG_OSF4_COMPAT flag from syscall table
alpha: move __IGNORE* entries to non uapi header
|
|
C-SKY historically used 39, the same value as MCORE, from which the
architecture was derived.
C-SKY binutils support both EM_CSKY and EM_CSKY_OLD, confirmed by
binutils:include/elf/common.h
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
With csky-gcc -pg -mbacktrace, ftrace call graph supported.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Commit 4936084c2ee2 ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h")
introduce a mistake in atomic64_fetch_##op##_relaxed(), because it
forget to delete R10000_LLSC_WAR in the if-condition. So fix it.
Fixes: 4936084c2ee2 ("MIPS: Cleanup R10000_LLSC_WAR logic in atomic.h")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.19+
|
|
When gcc with -pg, it'll add _mcount stub in every function. We need
implement the _mcount in kernel and ftrace depends on stackstrace.
To do: call-graph, dynamic ftrace
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Cleanup struct cpuinfo_csky and struct thread_struct, remove all esp0
related code. We could get pt_regs from sp and backtrace could use fp
in switch_stack.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Use STACKTRACE to optimize panic print more pretty and align registers
printing.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Trying to register the DSP platform device results in a null pointer
access:
[ 0.124184] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804e305c, ra == 804e6f20
[ 0.135208] Oops[#1]:
[ 0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87
...
[ 0.197117] epc : 804e305c bcm63xx_dsp_register+0x80/0xa4
[ 0.202838] ra : 804e6f20 board_register_devices+0x258/0x390
...
This happens because it tries to copy the passed platform data over the
platform_device's unpopulated platform_data.
Since this code has been broken since its submission, no driver was ever
submitted for it, and apparently nobody was using it, just remove it
instead of trying to fix it.
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
|
|
The gcc option "-mbacktrace" will push fp(r8),lr into stack and we could
unwind the stack with:
fp = *fp
lr = (unsigned int *)fp[1]
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
Dave Martin
Mathieu Malaterre
Michael Ellerman
Masahiro Yamada
Steven Rostedt (VMware)
Linus Torvalds
Yueyi Li
Mark Rutland
Shaokun Zhang
Aaro Koskinen
Bjorn Helgaas
Guo Ren
Russell King
Sebastian Ott
Stefan Wahren
Olof Johansson
Manivannan Sadhasivam
Andreas Färber
Huacai Chen
Jonas Gorski