| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Compilation of arch/m68k/68360/commproc.c fails with the following errors:
arch/m68k/68360/commproc.c:75:1: error: function declaration isn’t a prototype
arch/m68k/68360/commproc.c:211:1: error: function declaration isn’t a prototype
arch/m68k/68360/commproc.c: In function ‘cpm_install_handler’:
arch/m68k/68360/commproc.c:214:2: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type
include/linux/interrupt.h:128:1: note: expected ‘irq_handler_t’ but argument is of type ‘void (*)()’
It should be using the proper irq hander type, irq_handler_t. Modify it
to use that.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
There used to be a Kconfig symbol BSEIP. It was PPC specific and was
removed in v2.6.27. So the check for CONFIG_BSEIP can be removed. This
means a few defines will be removed. None of the macros involved are
used, so no one should care.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
Tegra clock fixes for 3.20
|
|
|
|
Adds a way for clock consumers to set maximum and minimum rates. This
can be used for thermal drivers to set minimum rates, or by misc.
drivers to set maximum rates to assure a minimum performance level.
Changes the signature of the determine_rate callback by adding the
parameters min_rate and max_rate.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[sboyd@codeaurora.org: set req_rate in __clk_init]
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate
migrated clk-private.h changes to clk.c]
|
|
Remove omap_clocks_register and dummy_ck. The former is not used anymore
now that the statically defined clk stuctures are replaced with proper
descriptors and registered with the framework.
The dummy clock in arch/arm/mach-omap2 is made redundant by the OMAP3+
clock data that migrated to drivers/clk.
An additional benefit to this clean-up is removing the references to
clk-private.h which will be removed.
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
|
|
Conflicts:
arch/arm/mach-omap2/cclock3xxx_data.c
|
|
Moves clock state to struct clk_core, but takes care to change as little API as
possible.
struct clk_hw still has a pointer to a struct clk, which is the
implementation's per-user clk instance, for backwards compatibility.
The struct clk that clk_get_parent() returns isn't owned by the caller, but by
the clock implementation, so the former shouldn't call clk_put() on it.
Because some boards in mach-omap2 still register clocks statically, their clock
registration had to be updated to take into account that the clock information
is stored in struct clk_core now.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: adapted clk_has_parent to struct clk_core
applied OMAP3+ DPLL fix from Tero & Tony]
|
|
* pci/misc:
r8169: use PCI define for Max_Read_Request_Size
[SCSI] esas2r: use PCI define for Max_Read_Request_Size
tile: use PCI define for Max_Read_Request_Size
rapidio/tsi721: use PCI define for Max_Read_Request_Size
PCI: Add defines for PCIe Max_Read_Request_Size
PCI/ASPM: Use standard parsing functions for sysfs setters
* pci/msi:
PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BAR
|
|
* pci/host-generic:
of/pci: Free resources on failure in of_pci_get_host_bridge_resources()
* pci/host-versatile:
PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver
ARM: dts: versatile: add PCI controller binding
PCI: versatile: Add DT docs for ARM Versatile PB PCIe driver
|
|
* pci/config:
PCI: xilinx: Convert to use generic config accessors
PCI: xgene: Convert to use generic config accessors
PCI: tegra: Convert to use generic config accessors
PCI: rcar: Convert to use generic config accessors
PCI: generic: Convert to use generic config accessors
powerpc/powermac: Convert PCI to use generic config accessors
powerpc/fsl_pci: Convert PCI to use generic config accessors
ARM: ks8695: Convert PCI to use generic config accessors
ARM: sa1100: Convert PCI to use generic config accessors
ARM: integrator: Convert PCI to use generic config accessors
ARM: cns3xxx: Convert PCI to use generic config accessors
PCI: Add generic config accessors
powerpc/PCI: Add struct pci_ops member names to initialization
mn10300/PCI: Add struct pci_ops member names to initialization
MIPS: PCI: Add struct pci_ops member names to initialization
frv/PCI: Add struct pci_ops member names to initialization
|
|
Add support for specifying PCI based UARTs for earlyprintk
using a syntax like "earlyprintk=pciserial,00:18.1,115200",
where 00:18.1 is the BDF of a UART device.
[Slightly tidied from Stuart's original patch]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds stdout-path property to chosen nodes of Exynos4 boards
to enable use of earlycon feature without the need to hardcode port
number in kernel itself.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Moorestown platform support was removed few years ago. This is a follow
up which removes Moorestown specific code for the serial devices. It includes
mrst_max3110 and earlyprintk bits.
This was used on SFI (Medfield, Clovertrail) based platforms as well, though
new ones use normal serial interface for the console service.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Revert 7c6a98dfa1ba9dc64a62e73624ecea9995736bbd, given
that testing PIR is not necessary anymore.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With APICv, LAPIC timer interrupt is always delivered via IRR:
apic_find_highest_irr syncs PIR to IRR.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We want the USB fixes in here to make merges easier.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comment was right originally but the _pad array size was wrong. It
was fixed in the meantime but the comment not updated.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
NEC OEMs the same platforms as Stratus does, which have multiple devices on
some PCIe buses under downstream ports.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331
Fixes: 1278998f8ff6 ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)")
Signed-off-by: Charlotte Richardson <charlotte.richardson@stratus.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.5+
CC: Myron Stowe <myron.stowe@redhat.com>
|
|
tegra_clocks_apply_init_table() needs to be called after the udelay
loop has been calibrated (see commit
441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer
application of init table") for why that is). On existing Tegra SoCs
this was done by calling tegra_clocks_apply_init_table() from
tegra_dt_init(). To make this also work on ARM64, we need to change
this into an initcall. tegra_dt_init() is called from
customize_machine which is an arch_initcall. Therefore this should
also work on existing 32bit Tegra SoCs.
Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and
Tegra132.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
[paul@pwsan.com: tweaked the commit message]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
|
|
8250 earlycon is broken on multi-platform ARC because the UART clk
value (BASE_BAUD) is fixed at build time.
Instead, determine the appropriate UART clk at runtime; parse the
devicetree early for platforms requiring alternate UART clk values
(currently only the TB10X platform).
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
prepare_to_copy() was removed from all architectures supported at that
time in commit 55ccf3fe3f9a ("fork: move the real prepare_to_copy()
users to arch_dup_task_struct()"). Remove it from arc as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Remove the string "(Device Tree)" after the machine name because all AT91
machines use the DT nowadays.
Also change some function names to unify following the convention:
- at91sam9xxx aren't named sam9, 9xxx but with the full name
- sama5 are the ones that don't have the at91 prefix anymore.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Move the ramc initialization to pm.c as it is the only user left.
This allows us to get rid of at91_dt_initialize() that was the only one called
by the init_early() function pointer of struct machine_desc.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: adapt patch to newer series]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
As board files are now DT only and can address all aspects of the SoC family,
we can rename them so that the mach-at91 directory looks cleaner.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
at91_boot_soc and at91_init_soc structures are not used by any SoC, remove
their use. Also remove all the now empty SoC files.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: different organization of the patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
For sama5d4, remove an indirection and the remaining need for at91_boot_soc
structure.
This will allow further cleanup.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Only use SOC_AT91SAM9 for all the at91sam9 SoCs. It removes all the empty
at91sam9xxx.c SoC files. It also removes the useless at91_init_soc affectation
procedure and its "init" function pointer.
Only the SoC detection and display are kept for the at91sam9:
at91_soc_is_enabled() and at91_boot_soc.map_io() function calls are also
removed.
It enables HAVE_AT91_SMD and HAVE_AT91_UTMI for all the sam9 SoCs but this only
represents 96 bytes of uncompressed kernel code.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: different organization of the patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
Setup arm_pm_idle and arm_pm_restart function pointers from
rm9200_dt_device_init() function to simplify the at91rm9200 initialization
process.
This same move is already done for the sam9s.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: adapt patch to newer series]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
|
|
|
|
Use the GPIO descriptor API instead of the deprecated legacy GPIO API to
manage the busy GPIO.
The patch updates both the jz4740 nand driver and the only user of the driver
the qi-lb60 board driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Add the remaining gpci requests that contain counters suitable for use
by perf. Omit those that don't contain any counters (but note their
ommision).
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This adds (in req-gen/) a framework for defining gpci counter requests.
It uses macro magic similar to ftrace.
Also convert the existing hv-gpci request structures and enum values to
use the new framework (and adjust old users of the structs and enum
values to cope with changes in naming).
In exchange for this macro disaster, we get autogenerated event listing
for GPCI in sysfs, build time field offset checking, and zero
duplication of information about GPCI requests.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Retrieves and parses the 24x7 catalog on POWER systems that supply it
(right now, only POWER 8). Events are exposed via sysfs in the standard
fashion, and are all parameterized.
$ cd /sys/bus/event_source/devices/hv_24x7/events
$ cat HPM_CS_FROM_L4_LDATA__PHYS_CORE
domain=0x2,offset=0xd58,core=?,lpar=0x0
$ cat HPM_TLBIE__VCPU_HOME_CHIP
domain=0x4,offset=0x358,vcpu=?,lpar=?
where user is required to specify values for the fields with '?' (like
core, vcpu, lpar above), when specifying the event with the perf tool.
Catalog is (at the moment) only parsed on boot. It needs re-parsing
when a some hypervisor events occur. At that point we'll also need to
prevent old events from continuing to function (counter that is passed
in via spare space in the config values?).
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Define a lite version of the EVENT_DEFINE_RANGE_FORMAT() that avoids
defining helper functions for the bit-field ranges.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
As commit 50ba08f3 ("of/fdt: Don't clear initial_boot_params
if fdt_check_header() fails") does, the device-tree pointer
"initial_boot_params" is initialized by early_init_dt_verify(),
which is called by early_init_devtree(). So we needn't explicitly
initialize that again in early_init_devtree().
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We have code to do syscall tracing which is disabled at compile time by
default. It's not been touched since the dawn of time (ie. v2.6.12).
There are now better ways to do syscall tracing, ie. using the
raw_syscall, or syscall tracepoints.
For the specific case of tracing syscalls at boot on a system that
doesn't get to userspace, you can boot with:
trace_event=syscalls tp_printk=on
Which will trace syscalls from boot, and echo all output to the console.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently when we back trace something that is in a syscall we see
something like this:
[c000000000000000] [c000000000000000] SyS_read+0x6c/0x110
[c000000000000000] [c000000000000000] syscall_exit+0x0/0x98
Although it's entirely correct, seeing syscall_exit at the bottom can be
confusing - we were exiting from a syscall and then called SyS_read() ?
If we instead change syscall_exit to be a local label we get something
more intuitive:
[c0000001fa46fde0] [c00000000026719c] SyS_read+0x6c/0x110
[c0000001fa46fe30] [c000000000009264] system_call+0x38/0xd0
ie. we were handling a system call, and it was SyS_read().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When unbinding and rebinding the driver on a system with a card in PHB0, this
error condition is reached after a few attempts:
ERROR: Bad of_node_put() on /pciex@3fffe40000000
CPU: 0 PID: 3040 Comm: bash Not tainted 3.18.0-rc3-12545-g3627ffe #152
Call Trace:
[c000000721acb5c0] [c00000000086ef94] .dump_stack+0x84/0xb0 (unreliable)
[c000000721acb640] [c00000000073a0a8] .of_node_release+0xd8/0xe0
[c000000721acb6d0] [c00000000044bc44] .kobject_release+0x74/0xe0
[c000000721acb760] [c0000000007394fc] .of_node_put+0x1c/0x30
[c000000721acb7d0] [c000000000545cd8] .cxl_probe+0x1a98/0x1d50
[c000000721acb900] [c0000000004845a0] .local_pci_probe+0x40/0xc0
[c000000721acb980] [c000000000484998] .pci_device_probe+0x128/0x170
[c000000721acba30] [c00000000052400c] .driver_probe_device+0xac/0x2a0
[c000000721acbad0] [c000000000522468] .bind_store+0x108/0x160
[c000000721acbb70] [c000000000521448] .drv_attr_store+0x38/0x60
[c000000721acbbe0] [c000000000293840] .sysfs_kf_write+0x60/0xa0
[c000000721acbc50] [c000000000292500] .kernfs_fop_write+0x140/0x1d0
[c000000721acbcf0] [c000000000208648] .vfs_write+0xd8/0x260
[c000000721acbd90] [c000000000208b18] .SyS_write+0x58/0x100
[c000000721acbe30] [c000000000009258] syscall_exit+0x0/0x98
We are missing a call to of_node_get(). pnv_pci_to_phb_node() should
call of_node_get() otherwise np's reference count isn't incremented and
it might go away. Rename pnv_pci_to_phb_node() to pnv_pci_get_phb_node()
so it's clear it calls of_node_get().
Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pull ARM SoC fixes from Olof Johansson:
"One more week's worth of fixes. Worth pointing out here are:
- A patch fixing detaching of iommu registrations when a device is
removed -- earlier the ops pointer wasn't managed properly
- Another set of Renesas boards get the same GIC setup fixup as
others have in previous -rcs
- Serial port aliases fixups for sunxi. We did the same to tegra but
we caught that in time before the merge window due to more machines
being affected. Here it took longer for anyone to notice.
- A couple more DT tweaks on sunxi
- A follow-up patch for the mvebu coherency disabling in last -rc
batch"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
ARM: sunxi: dt: Fix aliases
ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i
|
|
Merge "Third Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:
* Instantiate GIC from C board code in legacy builds on r8a7790 and r8a73a4
* tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
We used to optimize rescheduling and audit on syscall exit. Now
that the full slow path is reasonably fast, remove these
optimizations. Syscall exit auditing is now handled exclusively by
syscall_trace_leave.
This adds something like 10ns to the previously optimized paths on
my computer, presumably due mostly to SAVE_REST / RESTORE_REST.
I think that we should eventually replace both the syscall and
non-paranoid interrupt exit slow paths with a pair of C functions
along the lines of the syscall entry hooks.
Link: http://lkml.kernel.org/r/22f2aa4a0361707a5cfb1de9d45260b39965dead.1421453410.git.luto@amacapital.net
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
|
|
The x86_64 entry code currently jumps through complex and
inconsistent hoops to try to minimize the impact of syscall exit
work. For a true fast-path syscall, almost nothing needs to be
done, so returning is just a check for exit work and sysret. For a
full slow-path return from a syscall, the C exit hook is invoked if
needed and we join the iret path.
Using iret to return to userspace is very slow, so the entry code
has accumulated various special cases to try to do certain forms of
exit work without invoking iret. This is error-prone, since it
duplicates assembly code paths, and it's dangerous, since sysret
can malfunction in interesting ways if used carelessly. It's
also inefficient, since a lot of useful cases aren't optimized
and therefore force an iret out of a combination of paranoia and
the fact that no one has bothered to write even more asm code
to avoid it.
I would argue that this approach is backwards. Rather than trying
to avoid the iret path, we should instead try to make the iret path
fast. Under a specific set of conditions, iret is unnecessary. In
particular, if RIP==RCX, RFLAGS==R11, RIP is canonical, RF is not
set, and both SS and CS are as expected, then
movq 32(%rsp),%rsp;sysret does the same thing as iret. This set of
conditions is nearly always satisfied on return from syscalls, and
it can even occasionally be satisfied on return from an irq.
Even with the careful checks for sysret applicability, this cuts
nearly 80ns off of the overhead from syscalls with unoptimized exit
work. This includes tracing and context tracking, and any return
that invokes KVM's user return notifier. For example, the cost of
getpid with CONFIG_CONTEXT_TRACKING_FORCE=y drops from ~360ns to
~280ns on my computer.
This may allow the removal and even eventual conversion to C
of a respectable amount of exit asm.
This may require further tweaking to give the full benefit on Xen.
It may be worthwhile to adjust signal delivery and exec to try hit
the sysret path.
This does not optimize returns to 32-bit userspace. Making the same
optimization for CS == __USER32_CS is conceptually straightforward,
but it will require some tedious code to handle the differences
between sysretl and sysexitl.
Link: http://lkml.kernel.org/r/71428f63e681e1b4aa1a781e3ef7c27f027d1103.1421453410.git.luto@amacapital.net
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
|
|
context_tracking_user_exit() has no effect if in_interrupt() returns true,
so ist_enter() didn't work. Fix it by calling exception_enter(), and thus
context_tracking_user_exit(), before incrementing the preempt count.
This also adds an assertion that will catch the problem reliably if
CONFIG_PROVE_RCU=y to help prevent the bug from being reintroduced.
Link: http://lkml.kernel.org/r/261ebee6aee55a4724746d0d7024697013c40a08.1422709102.git.luto@amacapital.net
Fixes: 959274753857 x86, traps: Track entry into and exit from IST context
Reported-and-tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
|
|
Kishon writes:
Adds a new Rockchip PHY driver and contains miscellaneous fixes.
|
|
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
Greg Ungerer
Paul Bolle
Michael Turquette
Tomeu Vizoso
Bjorn Helgaas
Stuart R. Anderson
Tomasz Figa
Andy Shevchenko
Marcelo Tosatti
Greg Kroah-Hartman
Catalin Marinas
Charlotte Richardson
Peter De Schrijver
Vineet Gupta
Tobias Klauser
Nicolas Ferre
Alexandre Belloni
Lars-Peter Clausen
Cody P Schafer
sukadev@linux.vnet.ibm.com
Gavin Shan
Michael Ellerman
Ryan Grimm
Linus Torvalds
Olof Johansson
Andy Lutomirski
Geert Uytterhoeven