| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Instead of using legacy platform data, switch to use device properties.
For clock frequency we are using well established clock-frequency property.
Users, two for now, are also converted here.
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
|
|
Pull arm64 fix from Will Deacon:
"Fix pte_same() to avoid getting stuck on write fault.
This single arm64 fix is a revert of 747a70e60b72 ("arm64: Fix
copy-on-write referencing in HugeTLB"), not because that patch was
wrong, but because it was broken by aa57157be69f ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default") which we merged in
-rc6.
We spotted the issue in Android (AOSP), where one of the JIT threads
gets stuck on a write fault during boot because the faulting pte is
marked as PTE_DIRTY | PTE_WRITE | PTE_RDONLY and the fault handler
decides that there's nothing to do thanks to pte_same() masking out
PTE_RDONLY.
Thanks to John Stultz for reporting this and testing this so quickly,
and to Steve Capper for confirming that the HugeTLB tests continue to
pass"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Do not mask out PTE_RDONLY in pte_same()
|
|
Following commit 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out
of set_pte_at()"), the PTE_RDONLY bit is no longer managed by
set_pte_at() but built into the PAGE_* attribute definitions.
Consequently, pte_same() must include this bit when checking two PTEs
for equality.
Remove the arm64-specific pte_same() function, practically reverting
commit 747a70e60b72 ("arm64: Fix copy-on-write referencing in HugeTLB")
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Will Deacon <will@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-11-02
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 6 day(s) which contain
a total of 8 files changed, 35 insertions(+), 9 deletions(-).
The main changes are:
1) Fix ppc BPF JIT's tail call implementation by performing a second pass
to gather a stable JIT context before opcode emission, from Eric Dumazet.
2) Fix build of BPF samples sys_perf_event_open() usage to compiled out
unavailable test_attr__{enabled,open} checks. Also fix potential overflows
in bpf_map_{area_alloc,charge_init} on 32 bit archs, from Björn Töpel.
3) Fix narrow loads of bpf_sysctl context fields with offset > 0 on big endian
archs like s390x and also improve the test coverage, from Ilya Leoshkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-11-02
The following pull-request contains BPF updates for your *net-next* tree.
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 41 files changed, 1864 insertions(+), 474 deletions(-).
The main changes are:
1) Fix long standing user vs kernel access issue by introducing
bpf_probe_read_user() and bpf_probe_read_kernel() helpers, from Daniel.
2) Accelerated xskmap lookup, from Björn and Maciej.
3) Support for automatic map pinning in libbpf, from Toke.
4) Cleanup of BTF-enabled raw tracepoints, from Alexei.
5) Various fixes to libbpf and selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two new probe_kernel_read_strict() and strncpy_from_unsafe_strict()
helpers which by default alias to the __probe_kernel_read() and the
__strncpy_from_unsafe(), respectively, but can be overridden by archs
which have non-overlapping address ranges for kernel space and user
space in order to bail out with -EFAULT when attempting to probe user
memory including non-canonical user access addresses [0]:
4-level page tables:
user-space mem: 0x0000000000000000 - 0x00007fffffffffff
non-canonical: 0x0000800000000000 - 0xffff7fffffffffff
5-level page tables:
user-space mem: 0x0000000000000000 - 0x00ffffffffffffff
non-canonical: 0x0100000000000000 - 0xfeffffffffffffff
The idea is that these helpers are complementary to the probe_user_read()
and strncpy_from_unsafe_user() which probe user-only memory. Both added
helpers here do the same, but for kernel-only addresses.
Both set of helpers are going to be used for BPF tracing. They also
explicitly avoid throwing the splat for non-canonical user addresses from
00c42373d397 ("x86-64: add warning for non-canonical user access address
dereferences").
For compat, the current probe_kernel_read() and strncpy_from_unsafe() are
left as-is.
[0] Documentation/x86/x86_64/mm.txt
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: x86@kernel.org
Link: https://lore.kernel.org/bpf/eefeefd769aa5a013531f491a71f0936779e916b.1572649915.git.daniel@iogearbox.net
|
|
Pull powerpc fixes from Michael Ellerman:
"Our recent cleanup of EEH led to an oops on bare metal machines when
the cxl (CAPI) driver creates virtual devices for an attached FPGA
accelerator.
The "secure virtual machine" support we added in v5.4 had a bug if the
kernel was relocated (moved during boot), in those cases the signature
of the kernel text wouldn't verify and the Ultravisor would refuse to
run the VM.
A recent change to disable interrupts before calling
arch_cpu_idle_dead() caused a WARN_ON() in our bare metal CPU offline
code to always trigger.
The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the
address range crossed a segment (256MB) boundary which could lead to
spurious faults.
Thanks to: Christophe Leroy, Frederic Barrat, Michael Anderson,
Nicholas Piggin, Sam Bobroff, Thiago Jung Bauermann"
* tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Fix CPU idle to be called with IRQs disabled
powerpc/prom_init: Undo relocation before entering secure mode
powerpc/powernv/eeh: Fix oops when probing cxl devices
powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.
|
|
Pull s390 fixes from Vasily Gorbik:
- Fix cpu idle time accounting
- Fix stack unwinder case when both pt_regs and sp are specified
- Fix information leak via cmm timeout proc handler
* tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/idle: fix cpu idle time calculation
s390/unwind: fix mixing regs and sp
s390/cmm: fix information leak in cmm_timeout_handler()
|
|
Pull block fixes from Jens Axboe:
- Two small nvme fixes, one is a fabrics connection fix, the other one
a cleanup made possible by that fix (Anton, via Keith)
- Fix requeue handling in umb ubd (Anton)
- Fix spin_lock_irq() nesting in blk-iocost (Dan)
- Three small io_uring fixes:
- Install io_uring fd after done with ctx (me)
- Clear ->result before every poll issue (me)
- Fix leak of shadow request on error (Pavel)
* tag 'for-linus-20191101' of git://git.kernel.dk/linux-block:
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
|
|
Pull RISC-V fixes from Paul Walmsley:
"One fix for PCIe users:
- Fix legacy PCI I/O port access emulation
One set of cleanups:
- Resolve most of the warnings generated by sparse across arch/riscv.
No functional changes
And one MAINTAINERS update:
- Update Palmer's E-mail address"
* tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Change to my personal email address
RISC-V: Add PCIe I/O BAR memory mapping
riscv: for C functions called only from assembly, mark with __visible
riscv: fp: add missing __user pointer annotations
riscv: add missing header file includes
riscv: mark some code and data as file-static
riscv: init: merge split string literals in preprocessor directive
riscv: add prototypes for assembly language functions from head.S
|
|
We have seen many crashes on powerpc hosts while loading bpf programs.
The problem here is that bpf_int_jit_compile() does a first pass
to compute the program length.
Then it allocates memory to store the generated program and
calls bpf_jit_build_body() a second time (and a third time
later)
What I have observed is that the second bpf_jit_build_body()
could end up using few more words than expected.
If bpf_jit_binary_alloc() put the space for the program
at the end of the allocated page, we then write on
a non mapped memory.
It appears that bpf_jit_emit_tail_call() calls
bpf_jit_emit_common_epilogue() while ctx->seen might not
be stable.
Only after the second pass we can be sure ctx->seen wont be changed.
Trying to avoid a second pass seems quite complex and probably
not worth it.
Fixes: ce0761419faef ("powerpc/bpf: Implement support for tail calls")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191101033444.143741-1-edumazet@google.com
|
|
Pull parisc fix from Helge Deller:
"Fix a parisc kernel crash with ftrace functions when compiled without
frame pointers"
* 'parisc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix frame pointer in ftrace_regs_caller()
|
|
Pull perf fixes from Ingo Molnar:
"Misc fixes: an ABI fix for a reserved field, AMD IBS fixes, an Intel
uncore PMU driver fix and a header typo fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/headers: Fix spelling s/EACCESS/EACCES/, s/privilidge/privilege/
perf/x86/uncore: Fix event group support
perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
perf/core: Start rejecting the syscall with attr.__reserved_2 set
|
|
Pull EFI fixes from Ingo Molnar:
"Various fixes all over the map: prevent boot crashes on HyperV,
classify UEFI randomness as bootloader randomness, fix EFI boot for
the Raspberry Pi2, fix efi_test permissions, etc"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN
x86, efi: Never relocate kernel below lowest acceptable address
efi: libstub/arm: Account for firmware reserved memory at the base of RAM
efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness
efi/tpm: Return -EINVAL when determining tpm final events log size fails
efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
|
|
Pull arm64 fixes from Will Deacon:
"These are almost exclusively related to CPU errata in CPUs from
Broadcom and Qualcomm where the workarounds were either not being
enabled when they should have been or enabled when they shouldn't have
been.
The only "interesting" fix is ensuring that writeable, shared mappings
are initially mapped as clean since we inadvertently broke the logic
back in v4.14 and then noticed the problem via code inspection the
other day.
The only critical issue we have outstanding is a sporadic NULL
dereference in the scheduler, which doesn't appear to be
arm64-specific and PeterZ is tearing his hair out over it at the
moment.
Summary:
- Enable CPU errata workarounds for Broadcom Brahma-B53
- Enable CPU errata workarounds for Qualcomm Hydra/Kryo CPUs
- Fix initial dirty status of writeable, shared mappings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
arm64: Brahma-B53 is SSB and spectre v2 safe
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
arm64: cpufeature: Enable Qualcomm Falkor/Kryo errata 1003
arm64: Ensure VM_WRITE|VM_SHARED ptes are clean by default
|
|
Pull kvm fixes from Paolo Bonzini:
"generic:
- fix memory leak on failure to create VM
x86:
- fix MMU corner case with AMD nested paging disabled"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active
kvm: call kvm_arch_destroy_vm if vm creation fails
kvm: Allocate memslots and buses before calling kvm_arch_init_vm
|
|
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_843419 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_843419 into an erratum list and use
cpucap_multi_entry_cap_matches to match our entries.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the Brahma-B53 CPU (all versions) to the whitelists of CPUs for the
SSB and spectre v2 mitigations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_845719 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_845719 into an erratum list.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The idle time reported in /proc/stat sometimes incorrectly contains
huge values on s390. This is caused by a bug in arch_cpu_idle_time().
The kernel tries to figure out when a different cpu entered idle by
accessing its per-cpu data structure. There is an ordering problem: if
the remote cpu has an idle_enter value which is not zero, and an
idle_exit value which is zero, it is assumed it is idle since
"now". The "now" timestamp however is taken before the idle_enter
value is read.
Which in turn means that "now" can be smaller than idle_enter of the
remote cpu. Unconditionally subtracting idle_enter from "now" can thus
lead to a negative value (aka large unsigned value).
Fix this by moving the get_tod_clock() invocation out of the
loop. While at it also make the code a bit more readable.
A similar bug also exists for show_idle_time(). Fix this is as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
unwind_for_each_frame stops after the first frame if regs->gprs[15] <=
sp.
The reason is that in case regs are specified, the first frame should be
regs->psw.addr and the second frame should be sp->gprs[8]. However,
currently the second frame is regs->gprs[15], which confuses
outside_of_stack().
Fix by introducing a flag to distinguish this special case from
unwinding the interrupt handler, for which the current behavior is
appropriate.
Fixes: 78c98f907413 ("s390/unwind: introduce stack unwind API")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The problem is that we were putting the NUL terminator too far:
buf[sizeof(buf) - 1] = '\0';
If the user input isn't NUL terminated and they haven't initialized the
whole buffer then it leads to an info leak. The NUL terminator should
be:
buf[len - 1] = '\0';
Signed-off-by: Yihui Zeng <yzeng56@asu.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[heiko.carstens@de.ibm.com: keep semantics of how *lenp and *ppos are handled]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The Kryo cores share errata 1009 with Falkor, so add their model
definitions and enable it for them as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[will: Update entry in silicon-errata.rst]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
VMX already does so if the host has SMEP, in order to support the combination of
CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in
fact VMX already ends up running with EFER.NXE=1 on old processors that lack the
"load EFER" controls, because it may help avoiding a slow MSR write. Removing
all the conditionals simplifies the code.
SVM does not have similar code, but it should since recent AMD processors do
support SMEP. So this patch also makes the code for the two vendors more similar
while fixing NPT=0, CR0.WP=1 and CR4.SMEP=1 on AMD processors.
Cc: stable@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, kernel fails to boot on some HyperV VMs when using EFI.
And it's a potential issue on all x86 platforms.
It's caused by broken kernel relocation on EFI systems, when below three
conditions are met:
1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR)
by the loader.
2. There isn't enough room to contain the kernel, starting from the
default load address (eg. something else occupied part the region).
3. In the memmap provided by EFI firmware, there is a memory region
starts below LOAD_PHYSICAL_ADDR, and suitable for containing the
kernel.
EFI stub will perform a kernel relocation when condition 1 is met. But
due to condition 2, EFI stub can't relocate kernel to the preferred
address, so it fallback to ask EFI firmware to alloc lowest usable memory
region, got the low region mentioned in condition 3, and relocated
kernel there.
It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This
is the lowest acceptable kernel relocation address.
The first thing goes wrong is in arch/x86/boot/compressed/head_64.S.
Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output
address if kernel is located below it. Then the relocation before
decompression, which move kernel to the end of the decompression buffer,
will overwrite other memory region, as there is no enough memory there.
To fix it, just don't let EFI stub relocate the kernel to any address
lower than lowest acceptable address.
[ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-6-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current code in ftrace_regs_caller() doesn't assign
%r3 to contain the address of the current frame. This
is hidden if the kernel is compiled with FRAME_POINTER,
but without it just crashes because it tries to dereference
an arbitrary address. Fix this by always setting %r3 to the
current stack frame.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With the introduction of 'cce360b54ce6 ("arm64: capabilities: Filter the
entries based on a given mask")' the Qualcomm Falkor/Kryo errata 1003 is
no long applied.
The result of not applying errata 1003 is that MSM8996 runs into various
RCU stalls and fails to boot most of the times.
Give 1003 a "type" to ensure they are not filtered out in
update_cpu_capabilities().
Fixes: cce360b54ce6 ("arm64: capabilities: Filter the entries based on a given mask")
Cc: stable@vger.kernel.org
Reported-by: Mark Brown <broonie@kernel.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Shared and writable mappings (__S.1.) should be clean (!dirty) initially
and made dirty on a subsequent write either through the hardware DBM
(dirty bit management) mechanism or through a write page fault. A clean
pte for the arm64 kernel is one that has PTE_RDONLY set and PTE_DIRTY
clear.
The PAGE_SHARED{,_EXEC} attributes have PTE_WRITE set (PTE_DBM) and
PTE_DIRTY clear. Prior to commit 73e86cb03cf2 ("arm64: Move PTE_RDONLY
bit handling out of set_pte_at()"), it was the responsibility of
set_pte_at() to set the PTE_RDONLY bit and mark the pte clean if the
software PTE_DIRTY bit was not set. However, the above commit removed
the pte_sw_dirty() check and the subsequent setting of PTE_RDONLY in
set_pte_at() while leaving the PAGE_SHARED{,_EXEC} definitions
unchanged. The result is that shared+writable mappings are now dirty by
default
Fix the above by explicitly setting PTE_RDONLY in PAGE_SHARED{,_EXEC}.
In addition, remove the superfluous PTE_DIRTY bit from the kernel PROT_*
attributes.
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fixes crashes due to ubd requeue logic conflicting with the block-mq
logic. Crash is reproducible in 5.0 - 5.3.
Fixes: 53766defb8c8 ("um: Clean-up command processing in UML UBD driver")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit e78a7614f3876 ("idle: Prevent late-arriving interrupts from
disrupting offline") changes arch_cpu_idle_dead to be called with
interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self.
Fix this by fixing up irq_happened after hard disabling, rather than
requiring there are no pending interrupts, similarly to what was done
done until commit 2525db04d1cc5 ("powerpc/powernv: Simplify lazy IRQ
handling in CPU offline").
Fixes: e78a7614f3876 ("idle: Prevent late-arriving interrupts from disrupting offline")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add unexpected_mask rather than checking for known bad values,
change the WARN_ON() to a WARN_ON_ONCE()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.com
|
|
The ultravisor will do an integrity check of the kernel image but we
relocated it so the check will fail. Restore the original image by
relocating it back to the kernel virtual base address.
This works because during build vmlinux is linked with an expected
virtual runtime address of KERNELBASE.
Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init")
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Michael Anderson <andmike@linux.ibm.com>
[mpe: Add IS_ENABLED() to fix the CONFIG_RELOCATABLE=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190911163433.12822-1-bauerman@linux.ibm.com
|
|
Pull ARC fixes from Vineet Gupta:
"Small fixes for ARC:
- perf fix for Big Endian build [Alexey]
- hadk platform enable soem peripherals [Eugeniy]"
* tag 'arc-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: perf: Accommodate big-endian CPU
ARC: [plat-hsdk]: Enable on-boardi SPI ADC IC
ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC
|
|
For legacy I/O BARs (non-MMIO BARs) to work correctly on RISC-V Linux,
we need to establish a reserved memory region for them, so that drivers
that wish to use the legacy I/O BARs can issue reads and writes against
a memory region that is mapped to the host PCIe controller's I/O BAR
mapping.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The events in the same group don't start or stop simultaneously.
Here is the ftrace when enabling event group for uncore_iio_0:
# perf stat -e "{uncore_iio_0/event=0x1/,uncore_iio_0/event=0xe/}"
<idle>-0 [000] d.h. 8959.064832: read_msr: a41, value
b2b0b030 //Read counter reg of IIO unit0 counter0
<idle>-0 [000] d.h. 8959.064835: write_msr: a48, value
400001 //Write Ctrl reg of IIO unit0 counter0 to enable
counter0. <------ Although counter0 is enabled, Unit Ctrl is still
freezed. Nothing will count. We are still good here.
<idle>-0 [000] d.h. 8959.064836: read_msr: a40, value
30100 //Read Unit Ctrl reg of IIO unit0
<idle>-0 [000] d.h. 8959.064838: write_msr: a40, value
30000 //Write Unit Ctrl reg of IIO unit0 to enable all
counters in the unit by clear Freeze bit <------Unit0 is un-freezed.
Counter0 has been enabled. Now it starts counting. But counter1 has not
been enabled yet. The issue starts here.
<idle>-0 [000] d.h. 8959.064846: read_msr: a42, value 0
//Read counter reg of IIO unit0 counter1
<idle>-0 [000] d.h. 8959.064847: write_msr: a49, value
40000e //Write Ctrl reg of IIO unit0 counter1 to enable
counter1. <------ Now, counter1 just starts to count. Counter0 has
been running for a while.
Current code un-freezes the Unit Ctrl right after the first counter is
enabled. The subsequent group events always loses some counter values.
Implement pmu_enable and pmu_disable support for uncore, which can help
to batch hardware accesses.
No one uses uncore_enable_box and uncore_disable_box. Remove them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-drivers-review@eclists.intel.com
Cc: linux-perf@eclists.intel.com
Fixes: 087bfbb03269 ("perf/x86: Add generic Intel uncore PMU support")
Link: https://lkml.kernel.org/r/1572014593-31591-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This saves us writing the IBS control MSR twice when disabling the
event.
I searched revision guides for all families since 10h, and did not
find occurrence of erratum #420, nor anything remotely similar:
so we isolate the secondary MSR write to family 10h only.
Also unconditionally update the count mask for IBS Op implementations
that have read & writeable current count (CurCnt) fields in addition
to the MaxCnt field. These bits were reserved on prior
implementations, and therefore shouldn't have negative impact.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: c9574fe0bdb9 ("perf/x86-ibs: Implement workaround for IBS erratum #420")
Link: https://lkml.kernel.org/r/20191023150955.30292-2-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The loop that reads all the IBS MSRs into *buf stopped one MSR short of
reading the IbsOpData register, which contains the RipInvalid status bit.
Fix the offset_max assignment so the MSR gets read, so the RIP invalid
evaluation is based on what the IBS h/w output, instead of what was
left in memory.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: d47e8238cd76 ("perf/x86-ibs: Take instruction pointer from ibs sample")
Link: https://lkml.kernel.org/r/20191023150955.30292-1-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rather than adding prototypes for C functions called only by assembly
code, mark them as __visible. This avoids adding prototypes that will
never be used by the callers. Resolves the following sparse warnings:
arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static?
arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static?
arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static?
arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static?
arch/riscv/kernel/traps.c:100:1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static?
arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static?
arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static?
arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static?
Based on a suggestion from Luc Van Oostenryck.
This version includes changes based on feedback from Christoph Hellwig
<hch@lst.de>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de> # for do_syscall_trace_*
|
|
The __user annotations were removed from the {save,restore}_fp_state()
function signatures by commit 007f5c358957 ("Refactor FPU code in
signal setup/return procedures"), but should be present, and sparse
warns when they are not applied. Add them back in.
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Fixes: 007f5c358957 ("Refactor FPU code in signal setup/return procedures")
Cc: Alan Kao <alankao@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
sparse identifies several missing prototypes caused by missing
preprocessor include directives:
arch/riscv/kernel/cpufeature.c:16:6: warning: symbol 'has_fpu' was not declared. Should it be static?
arch/riscv/kernel/process.c:26:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static?
arch/riscv/kernel/reset.c:15:6: warning: symbol 'pm_power_off' was not declared. Should it be static?
arch/riscv/kernel/syscall_table.c:15:6: warning: symbol 'sys_call_table' was not declared. Should it be static?
arch/riscv/kernel/traps.c:149:13: warning: symbol 'trap_init' was not declared. Should it be static?
arch/riscv/kernel/vdso.c:54:5: warning: symbol 'arch_setup_additional_pages' was not declared. Should it be static?
arch/riscv/kernel/smp.c:64:6: warning: symbol 'arch_match_cpu_phys_id' was not declared. Should it be static?
arch/riscv/kernel/module-sections.c:89:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static?
arch/riscv/mm/context.c:42:6: warning: symbol 'switch_mm' was not declared. Should it be static?
Fix by including the appropriate header files in the appropriate
source files.
This patch should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Several functions and arrays which are only used in the files in which
they are declared are missing "static" qualifiers. Warnings for these
symbols are reported by sparse:
arch/riscv/kernel/vdso.c:28:18: warning: symbol 'vdso_data' was not declared. Should it be static?
arch/riscv/mm/sifive_l2_cache.c:145:12: warning: symbol 'sifive_l2_init' was not declared. Should it be static?
Resolve these warnings by marking them as static.
This version incorporates feedback from Greentime Hu
<greentime.hu@sifive.com>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greentime Hu <greentime.hu@sifive.com>
|
|
sparse complains loudly when string literals associated with
preprocessor directives are split into multiple, separately quoted
strings across different lines:
arch/riscv/mm/init.c:341:9: error: Expected ; at the end of type declaration
arch/riscv/mm/init.c:341:9: error: got "not use absolute addressing."
arch/riscv/mm/init.c:358:9: error: Trying to use reserved word 'do' as identifier
arch/riscv/mm/init.c:358:9: error: Expected ; at end of declaration
[ ... ]
It turns out this doesn't compile. The existing Linux practice for
this situation is simply to use a single long line. So, fix by
concatenating the strings.
This patch should have no functional impact.
This version incorporates changes based on feedback from Luc Van
Oostenryck <luc.vanoostenryck@gmail.com>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-riscv/CAAhSdy2nX2LwEEAZuMtW_ByGTkHO6KaUEvVxRnba_ENEjmFayQ@mail.gmail.com/T/#mc1a58bc864f71278123d19a7abc083a9c8e37033
Fixes: 387181dcdb6c1 ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace")
Cc: Anup Patel <anup.patel@wdc.com>
|
|
Add prototypes for assembly language functions defined in head.S,
and include these prototypes into C source files that call those
functions.
This patch resolves the following warnings from sparse:
arch/riscv/kernel/setup.c:39:10: warning: symbol 'hart_lottery' was not declared. Should it be static?
arch/riscv/kernel/setup.c:42:13: warning: symbol 'parse_dtb' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:33:6: warning: symbol '__cpu_up_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:34:6: warning: symbol '__cpu_up_task_pointer' was not declared. Should it be static?
arch/riscv/mm/fault.c:25:17: warning: symbol 'do_page_fault' was not declared. Should it be static?
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the VMWare guest support:
- Unbreak VMWare platform detection which got wreckaged by converting
an integer constant to a string constant.
- Fix the clang build of the VMWAre hypercall by explicitely
specifying the ouput register for INL instead of using the short
form"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm
|
|
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
kernel:
- Unbreak the tracking of auxiliary buffer allocations which got
imbalanced causing recource limit failures.
- Fix the fallout of splitting of ToPA entries which missed to shift
the base entry PA correctly.
- Use the correct context to lookup the AUX event when unmapping the
associated AUX buffer so the event can be stopped and the buffer
reference dropped.
tools:
- Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
/proc/kcore
- Fix freeing id arrays in the event list so the correct event is
closed.
- Sync sched.h anc kvm.h headers with the kernel sources.
- Link jvmti against tools/lib/ctype.o to have weak strlcpy().
- Fix multiple memory and file descriptor leaks, found by coverity in
perf annotate.
- Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
by a static analysis tool"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix AUX output stopping
perf/aux: Fix tracking of auxiliary trace buffer allocation
perf/x86/intel/pt: Fix base for single entry topa
perf kmem: Fix memory leak in compact_gfp_flags()
tools headers UAPI: Sync sched.h with the kernel
tools headers kvm: Sync kvm.h headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
perf c2c: Fix memory leak in build_cl_output()
perf tools: Fix mode setting in copyfile_mode_ns()
perf annotate: Fix multiple memory and file descriptor leaks
perf tools: Fix resource leak of closedir() on the error paths
perf evlist: Fix fix for freed id arrays
perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()
|
|
Pull RISC-V fixes from Paul Walmsley:
"Several minor fixes and cleanups for v5.4-rc5:
- Three build fixes for various SPARSEMEM-related kernel
configurations
- Two cleanup patches for the kernel bug and breakpoint trap handler
code"
* tag 'riscv/for-v5.4-rc5-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: cleanup do_trap_break
riscv: cleanup <asm/bug.h>
riscv: Fix undefined reference to vmemmap_populate_basepages
riscv: Fix implicit declaration of 'page_to_section'
riscv: fix fs/proc/kcore.c compilation with sparsemem enabled
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes:
- Fix VDSO time-related function behavior for systems where we need
to fall back to syscalls, but were instead returning bogus results.
- A fix to TLB exception handlers for Cavium Octeon systems where
they would inadvertently clobber the $1/$at register.
- A build fix for bcm63xx configurations.
- Switch to using my @kernel.org email address"
* tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: tlbex: Fix build_restore_pagemask KScratch restore
MIPS: bmips: mark exception vectors as char arrays
mips: vdso: Fix __arch_get_hw_counter()
MAINTAINERS: Use @kernel.org address for Paul Burton
|
Andy Shevchenko
David S. Miller
Linus Torvalds
Catalin Marinas
Daniel Borkmann
Eric Dumazet
Florian Fainelli
Doug Berger
Heiko Carstens
Ilya Leoshkevich
Yihui ZENG
Bjorn Andersson
Paolo Bonzini
Kairui Song
Sven Schnelle
Anton Ivanov
Nicholas Piggin
Thiago Jung Bauermann
Yash Shah
Kan Liang
Kim Phillips
Paul Walmsley