| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch solves the following error:
arch/arm/boot/dts/rk3228-evb.dtb: ERROR (phandle_references): Reference to non-existent node or label "phy0"
Fixess db40f15b53e4 ("ARM: dts: rk3228-evb: Enable the integrated PHY for gmac")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a missing break causing a fall-through and setting
ctx.use_bbit_insns to the wrong value. Fix this by adding the
missing break.
Detected with cppcheck:
"Variable 'ctx.use_bbit_insns' is reassigned a value before the old
one has been used. 'break;' missing?"
Fixes: 8d8d18c3283f ("MIPS,bpf: Fix using smp_processor_id() in preemptible splat.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The JIT compiler emits ARM 32 bit instructions. Currently, It supports
eBPF only. Classic BPF is supported because of the conversion by BPF core.
This patch is essentially changing the current implementation of JIT compiler
of Berkeley Packet Filter from classic to internal with almost all
instructions from eBPF ISA supported except the following
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW
Implementation is using scratch space to emulate 64 bit eBPF ISA on 32 bit
ARM because of deficiency of general purpose registers on ARM. Currently,
only LITTLE ENDIAN machines are supported in this eBPF JIT Compiler.
Tested on ARMv7 with QEMU by me (Shubham Bansal).
Testing results on ARMv7:
1) test_bpf: Summary: 341 PASSED, 0 FAILED, [312/333 JIT'ed]
2) test_tag: OK (40945 tests)
3) test_progs: Summary: 30 PASSED, 0 FAILED
4) test_lpm: OK
5) test_lru_map: OK
Above tests are all done with following flags enabled discreatly.
1) bpf_jit_enable=1
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
2) bpf_jit_enable=1 and bpf_jit_harden=2
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
See Documentation/networking/filter.txt for more information.
Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Pull sparc fixes from David Miller:
"Just a couple small fixes, two of which have to do with gcc-7:
1) Don't clobber kernel fixed registers in __multi4 libgcc helper.
2) Fix a new uninitialized variable warning on sparc32 with gcc-7,
from Thomas Petazzoni.
3) Adjust pmd_t initializer on sparc32 to make gcc happy.
4) If ATU isn't available, don't bark in the logs. From Tushar Dave"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus()
sparc64: remove unnecessary log message
sparc64: Don't clibber fixed registers in __multi4.
mm: add pmd_t initializer __pmd() to work around a GCC bug.
|
|
When building the kernel for Sparc using gcc 7.x, the build fails
with:
arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’:
arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cmd |= PCI_COMMAND_IO;
^~
The simplified code looks like this:
unsigned int cmd;
[...]
pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
[...]
cmd |= PCI_COMMAND_IO;
I.e, the code assumes that pcic_read_config() will always initialize
cmd. But it's not the case. Looking at pcic_read_config(), if
bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will
not be initialized.
As a simple fix, we initialize cmd to zero at the beginning of
pcibios_fixup_bus.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ARC fixes from Vineet Gupta:
- PAE40 related updates
- SLC errata for region ops
- intc line masking by default
* tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: Mask individual IRQ lines during core INTC init
ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
ARC: dma: implement dma_unmap_page and sg variant
ARCv2: SLC: Make sure busy bit is set properly for region ops
ARC: [plat-sim] Include this platform unconditionally
ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103
ARC: defconfig: Cleanup from old Kconfig options
|
|
The code looks a little cleaner if we replace BPF_OP(insn->code) with
the local variable bpf_op. Caching the value this way also saves 300
bytes (about 1%) in the code size of the JIT.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the kernel is configured with preemption enabled we were getting
warning stack traces for use of current_cpu_type().
Fix by moving the test between preempt_disable()/preempt_enable() and
caching the results of the CPU type tests for use during code
generation.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull x86 fixes from Thomas Gleixner:
"Another pile of small fixes and updates for x86:
- Plug a hole in the SMAP implementation which misses to clear AC on
NMI entry
- Fix the norandmaps/ADDR_NO_RANDOMIZE logic so the command line
parameter works correctly again
- Use the proper accessor in the startup64 code for next_early_pgt to
prevent accessing of invalid addresses and faulting in the early
boot code.
- Prevent CPU hotplug lock recursion in the MTRR code
- Unbreak CPU0 hotplugging
- Rename overly long CPUID bits which got introduced in this cycle
- Two commits which mark data 'const' and restrict the scope of data
and functions to file scope by making them 'static'"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Constify attribute_group structures
x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt'
x86/elf: Remove the unnecessary ADDR_NO_RANDOMIZE checks
x86: Fix norandmaps/ADDR_NO_RANDOMIZE
x86/mtrr: Prevent CPU hotplug lock recursion
x86: Mark various structures and functions as 'static'
x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag
x86/smpboot: Unbreak CPU0 hotplug
x86/asm/64: Clear AC on NMI entries
|
|
Pull timer fixes from Thomas Gleixner:
"A few small fixes for timer drivers:
- Prevent infinite recursion in the arm architected timer driver with
ftrace
- Propagate error codes to the caller in case of failure in EM STI
driver
- Adjust a bogus loop iteration in the arm architected timer driver
- Add a missing Kconfig dependency to the pistachio clocksource to
prevent build failures
- Correctly check for IS_ERR() instead of NULL in the shared timer-of
code"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled
clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies
clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL
clocksource/drivers/em_sti: Fix error return codes in em_sti_probe()
clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization
|
|
Pull perf fixes from Thomas Gleixner:
"Two fixes for the perf subsystem:
- Fix an inconsistency of RDPMC mm struct tagging across exec() which
causes RDPMC to fault.
- Correct the timestamp mechanics across IOC_DISABLE/ENABLE which
causes incorrect timestamps and total time calculations"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix time on IOC_ENABLE
perf/x86: Fix RDPMC vs. mm_struct tracking
|
|
Pull watchdog fix from Thomas Gleixner:
"A fix for the hardlockup watchdog to prevent false positives with
extreme Turbo-Modes which make the perf/NMI watchdog fire faster than
the hrtimer which is used to verify.
Slightly larger than the minimal fix, which just would increase the
hrtimer frequency, but comes with extra overhead of more watchdog
timer interrupts and thread wakeups for all users.
With this change we restrict the overhead to the extreme Turbo-Mode
systems"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/watchdog: Prevent false positives with turbo modes
|
|
Moving the x86_64 and arm64 PIE base from 0x555555554000 to 0x000100000000
broke AddressSanitizer. This is a partial revert of:
eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
02445990a96e ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB")
The AddressSanitizer tool has hard-coded expectations about where
executable mappings are loaded.
The motivation for changing the PIE base in the above commits was to
avoid the Stack-Clash CVEs that allowed executable mappings to get too
close to heap and stack. This was mainly a problem on 32-bit, but the
64-bit bases were moved too, in an effort to proactively protect those
systems (proofs of concept do exist that show 64-bit collisions, but
other recent changes to fix stack accounting and setuid behaviors will
minimize the impact).
The new 32-bit PIE base is fine for ASan (since it matches the ET_EXEC
base), so only the 64-bit PIE base needs to be reverted to let x86 and
arm64 ASan binaries run again. Future changes to the 64-bit PIE base on
these architectures can be made optional once a more dynamic method for
dealing with AddressSanitizer is found. (e.g. always loading PIE into
the mmap region for marked binaries.)
Link: http://lkml.kernel.org/r/20170807201542.GA21271@beast
Fixes: eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
Fixes: 02445990a96e ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Kostya Serebryany <kcc@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 05a4a9527931 ("kernel/watchdog: split up config options") lost
the perf-based hardlockup detector's dependency on PERF_EVENTS, which
can result in broken builds with some powerpc configurations.
Restore the dependency. Add it in for x86 too, despite x86 always
selecting PERF_EVENTS it seems reasonable to make the dependency
explicit.
Link: http://lkml.kernel.org/r/20170810114452.6673-1-npiggin@gmail.com
Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull powerpc fixes from Michael Ellerman:
"A bug in the VSX register saving that could cause userspace FP/VMX
register corruption.
Never seen to happen (that we know of), was found by code inspection,
but still tagged for stable given the consequences"
* tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC
|
|
Pull ARM SoC fixes from Arnd Bergmann:
"A small number of bugfixes, nothing serious this time. Here is a full
list.
4.13 regression fix:
- imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete
patch
DT fixes for recently added devices:
- badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset
- sama5d2 memory controller had the wrong ID and registers
- imx7 power domains did not work correctly with deferred probing
(driver added in 4.12)
- Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO
interrupts
Fixes for older bugs that just got noticed:
- i.MX25 ADC support (added in 4.6) apparently never worked right due
to a missing 'ranges' property in DT.
- Renesas Salvador Audio support (added in v4.5) was broken for
device repeated bind/unbind due to a naming conflict.
- Various allwinner boards are missing an 'ethernet' alias in DT,
leading to unstable device naming.
Preventive bugfix:
- TI Keystone needs a fix to prevent a NULL pointer dereference with
an upcoming PM change"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: ti: ti_sci_pm_domains: Populate name for genpd
ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
ARM: dts: i.MX25: add ranges to tscadc
soc: imx: gpcv2: fix regulator deferred probe
ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration
ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
|
|
The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.
The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.
A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.
Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.
That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.
Fixes: 58687acba592 ("lockup_detector: Combine nmi_watchdog and softlockup detector")
Reported-and-tested-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dzickus@redhat.com
Cc: prarit@redhat.com
Cc: ak@linux.intel.com
Cc: babu.moger@oracle.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: acme@redhat.com
Cc: stable@vger.kernel.org
Cc: atomlin@redhat.com
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
|
|
Pull "i.MX fixes for 4.13, round 3" from Shawn Guo:
- Fix PCIe reset GPIO of imx6qdl-nitrogen6_som2 board, which was
a bad copy from nitrogen6_max device tree.
* tag 'imx-fixes-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
|
|
Pull "Allwinner fixes for 4.13, round 2" from Chen-Yu Tsai:
Three fixes adding a missing alias for the Ethernet controller on A64
boards. One adding a missing interrupt for the pin controller.
* tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
|
|
attribute_groups are not supposed to change at runtime and none of the
groups is modified.
Mark the non-const structs as const.
[ tglx: Folded into one big patch ]
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: tony.luck@intel.com
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/1500550238-15655-2-git-send-email-arvind.yadav.cs@gmail.com
|
|
Previous value was a bad copy of nitrogen6_max device tree.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull power management fixes from Rafael Wysocki:
"These fix two issues related to exposing the current CPU frequency to
user space on x86.
Specifics:
- Disable interrupts around reading IA32_APERF and IA32_MPERF in
aperfmperf_snapshot_khz() (introduced recently) to avoid excessive
delays between the reads that may result from interrupt handling
(Doug Smythies).
- Fix the computation of the CPU frequency to be reported through the
pstate_sample tracepoint in intel_pstate (Doug Smythies)"
* tag 'pm-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: x86: Disable interrupts during MSRs reading
cpufreq: intel_pstate: report correct CPU frequencies during trace
|
|
* intel_pstate-fix:
cpufreq: intel_pstate: report correct CPU frequencies during trace
* cpufreq-x86-fix:
cpufreq: x86: Disable interrupts during MSRs reading
|
|
Pull "Fourth Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
* Avoid audio_clkout naming conflict for salvator boards using
Renesas R-Car Gen 3 SoCs
Morimoto-san says "The clock name of "audio_clkout" is used by the
Renesas sound driver. This duplicated naming breaks its clock
registering/unregistering. Especially when unbind/bind it can't handle
clkout correctly. This patch renames "audio_clkout" to "audio-clkout" to
avoid the naming conflict."
* tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
|
|
__startup_64() is normally using fixup_pointer() to access globals in a
position-independent fashion. However 'next_early_pgt' was accessed
directly, which wasn't guaranteed to work.
Luckily GCC was generating a R_X86_64_PC32 PC-relative relocation for
'next_early_pgt', but Clang emitted a R_X86_64_32S, which led to
accessing invalid memory and rebooting the kernel.
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Davidson <md@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
Link: http://lkml.kernel.org/r/20170816190808.131748-1-glider@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The ADDR_NO_RANDOMIZE checks in stack_maxrandom_size() and
randomize_stack_top() are not required.
PF_RANDOMIZE is set by load_elf_binary() only if ADDR_NO_RANDOMIZE is not
set, no need to re-check after that.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170815154011.GB1076@redhat.com
|
|
Documentation/admin-guide/kernel-parameters.txt says:
norandmaps Don't use address space randomization. Equivalent
to echo 0 > /proc/sys/kernel/randomize_va_space
but it doesn't work because arch_rnd() which is used to randomize
mm->mmap_base returns a random value unconditionally. And as Kirill
pointed out, ADDR_NO_RANDOMIZE is broken by the same reason.
Just shift the PF_RANDOMIZE check from arch_mmap_rnd() to arch_rnd().
Fixes: 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170815153952.GA1076@redhat.com
|
|
There is no need to log message if ATU hvapi couldn't get register.
Unlike PCI hvapi, ATU hvapi registration failure is not hard error.
Even if ATU hvapi registration fails (on system with ATU or without
ATU) system continues with legacy IOMMU. So only log message when
ATU hvapi successfully get registered.
Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
%g4 and %g5 are fixed registers used by the kernel for the thread
pointer and the per-cpu offset. Use %o4 and %g7 instead.
Diagnosis by Anthony Yznaga.
Fixes: 1b4af13ff2cc ("sparc64: Add __multi3 for gcc 7.x and later.")
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VSX uses a combination of the old vector registers, the old FP
registers and new "second halves" of the FP registers.
Thus when we need to see the VSX state in the thread struct
(flush_vsx_to_thread()) or when we'll use the VSX in the kernel
(enable_kernel_vsx()) we need to ensure they are all flushed into
the thread struct if either of them is individually enabled.
Unfortunately we only tested if the whole VSX was enabled, not if they
were individually enabled.
Fixes: 72cd7b44bc99 ("powerpc: Uncomment and make enable_kernel_vsx() routine available")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
|
|
Pull "DT fixes for 4.13" from Alexandre Belloni:
- Fix NAND flash support for sama5d2
* tag 'at91-ab-4.13-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration
ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
|
|
Pull "i.MX fixes for 4.13, round 2" from Shawn Guo:
- Add missing 'ranges' property for i.MX25 device tree TSCADC node, so
that it's child nodes ADC and TSC device can be probed by kernel.
- Fix i.MX GPCv2 power domain driver to request regulator after power
domain initialization, since regulator could defer probing and
therefore cause power domain initialized twice.
* tag 'imx-fixes-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: i.MX25: add ranges to tscadc
soc: imx: gpcv2: fix regulator deferred probe
|
|
Pull "i.MX fixes for 4.13" from Shawn Guo:
- A fix for imx7d-sdb board to move pinctrl_spi4 pins from low power
iomux controller to normal iomuxc node, as the pins belong to normal
iomuxc rather than low power one.
* tag 'imx-fixes-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
|
|
Larry reported a CPU hotplug lock recursion in the MTRR code.
============================================
WARNING: possible recursive locking detected
systemd-udevd/153 is trying to acquire lock:
(cpu_hotplug_lock.rw_sem){.+.+.+}, at: [<c030fc26>] stop_machine+0x16/0x30
but task is already holding lock:
(cpu_hotplug_lock.rw_sem){.+.+.+}, at: [<c0234353>] mtrr_add_page+0x83/0x470
....
cpus_read_lock+0x48/0x90
stop_machine+0x16/0x30
mtrr_add_page+0x18b/0x470
mtrr_add+0x3e/0x70
mtrr_add_page() holds the hotplug rwsem already and calls stop_machine()
which acquires it again.
Call stop_machine_cpuslocked() instead.
Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708140920250.1865@nanos
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@suse.de>
|
|
Pull crypto fixes from Herbert Xu:
"Fix an error path bug in ixp4xx as well as a read overrun in
sha1-avx2"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sha1 - Fix reads beyond the number of blocks passed
crypto: ixp4xx - Fix error handling path in 'aead_perform()'
|
|
The pin controller of H5 has three IRQs at the chip's GIC, which
represents three banks of pinctrl IRQs. However, the device tree used to
miss the third IRQ of the pin controller, which makes the PG bank IRQ
not usable.
Add the missing IRQ to the pinctrl node.
Fixes: 4e36de179f27 ("arm64: allwinner: h5: add Allwinner H5 .dtsi")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes:
- compressed boot: Ignore a generated .c file
- VDSO: Fix a register clobber list
- DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
- Octeon: Fix recent cleanups that cleaned away a bit too much thus
breaking the arch side of the EDAC and USB drivers.
- uasm: Fix duplicate const in "const struct foo const bar[]" which
GCC 7.1 no longer accepts.
- Fix race on setting and getting cpu_online_mask
- Fix preemption issue. To do so cleanly introduce macro to get the
size of L3 cache line.
- Revert include cleanup that sometimes results in build error
- MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make
sure this bit is set for kernel entry as well.
- Prevent configuring the kernel for both microMIPS and MT. There are
no such CPUs currently and thus the combination is unsupported and
results in build errors.
This has been sitting in linux-next for a few days and has survived
automated testing by Imagination's test farm. No known regressions
pending except a number of issues that crept up due to lots of people
switching to GCC 7.1"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Set ISA bit in entry-y for microMIPS kernels
MIPS: Prevent building MT support for microMIPS kernels
MIPS: PCI: Fix smp_processor_id() in preemptible
MIPS: Introduce cpu_tcache_line_size
MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
MIPS: VDSO: Fix clobber lists in fallback code paths
Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>."
MIPS: OCTEON: Fix USB platform code breakage.
MIPS: Octeon: Fix broken EDAC driver.
MIPS: gitignore: ignore generated .c files
MIPS: Fix race on setting and getting cpu_online_mask
MIPS: mm: remove duplicate "const" qualifier on insn_table
|
|
Pull clockevents fixes from Daniel Lezcano:
" - Fix error check against IS_ERR() instead of NULL for the timer-of code (Dan Carpenter)
- Fix infinite recusion with ftrace for the ARM architected timer (Ding Tianhong)
- Fix the error code return in the em_sti's probe function (Gustavo A. R. Silva)
- Fix Kconfig dependency for the pistachio driver (Matt Redfearn)
- Fix mem frame loop initialization for the ARM architected timer (Matthias Kaehlcke)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull xen fixes from Juergen Gross:
"Some fixes for Xen:
- a fix for a regression introduced in 4.13 for a Xen HVM-guest
configured with KASLR
- a fix for a possible deadlock in the xenbus driver when booting the
system
- a fix for lost interrupts in Xen guests"
* tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: Fix interrupt lost during irq_disable and irq_enable
xen: avoid deadlock in xenbus
xen: fix hvm guest with kaslr enabled
xen: split up xen_hvm_init_shared_info()
x86: provide an init_mem_mapping hypervisor hook
|
|
Enable the gmac2phy, make the gmac2phy work on
the rk3328-evb board.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The gmac2phy controller of rk3328 is connected to integrated PHY
directly inside, add the node for the integrated PHY support.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables the integrated PHY for rk3228 evb board
by default.
To use the external 1000M PHY on evb board, need to make
some switch of evb board to be on.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the rockchip PHY driver built into the kernel.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable the rockchip PHY driver for multi_v7_defconfig builds.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull powerpc fixes from Michael Ellerman:
"All fixes for code that went in this cycle.
- a revert of an optimisation to the syscall exit path, which could
lead to an oops on either older machines or machines with > 1TB of
memory
- disable some deep idle states if the firmware configuration for
them fails
- re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig
change
- six fairly small patches fixing bugs in our new watchdog code
Thanks to: Gautham R Shenoy, Nicholas Piggin"
* tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/watchdog: add locking around init/exit functions
powerpc/watchdog: Fix marking of stuck CPUs
powerpc/watchdog: Fix final-check recovered case
powerpc/watchdog: Moderate touch_nmi_watchdog overhead
powerpc/watchdog: Improve watchdog lock primitive
powerpc: NMI IPI improve lock primitive
powerpc/configs: Re-enable HARD/SOFT lockup detectors
powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails
Revert "powerpc/64: Avoid restore_math call if possible in syscall exit"
|
|
On platforms with an arch timer erratum workaround, it's possible for
arch_timer_reg_read_stable() to recurse into itself when certain
tracing options are enabled, leading to stack overflows and related
problems.
For example, when PREEMPT_TRACER and FUNCTION_GRAPH_TRACER are
selected, it's possible to trigger this with:
$ mount -t debugfs nodev /sys/kernel/debug/
$ echo function_graph > /sys/kernel/debug/tracing/current_tracer
The problem is that in such cases, preempt_disable() instrumentation
attempts to acquire a timestamp via trace_clock(), resulting in a call
back to arch_timer_reg_read_stable(), and hence recursion.
This patch changes arch_timer_reg_read_stable() to use
preempt_{disable,enable}_notrace(), which avoids this.
This problem is similar to the fixed by upstream commit 96b3d28bf4
("sched/clock: Prevent tracing recursion in sched_clock_cpu()").
Fixes: 6acc71ccac71 ("arm64: arch_timer: Allows a CPU-specific erratum to only affect a subset of CPUs")
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
A Xen HVM guest running with KASLR enabled will die rather soon today
because the shared info page mapping is using va() too early. This was
introduced by commit a5d5f328b0e2baa5ee7c119fd66324eb79eeeb66 ("xen:
allocate page for shared info page from low memory").
In order to fix this use early_memremap() to get a temporary virtual
address for shared info until va() can be used safely.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
David Wu
Colin Ian King
Shubham Bansal
David S. Miller
Linus Torvalds
Thomas Petazzoni
David Daney
Kees Cook
Nicholas Piggin
Thomas Gleixner
Arnd Bergmann
Arvind Yadav
Gary Bisson
Rafael J. Wysocki
Alexander Potapenko
Oleg Nesterov
Tushar Dave
Benjamin Herrenschmidt
Icenowy Zheng
Ingo Molnar
Ding Tianhong
Juergen Gross