aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-01-09[CRYPTO] aes-i586: Remove unused variable ls_tabDaniel Marjamäki1-10/+0
It is assigned but never read. Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] aes-i586: Nano-optimisation on key length checkDenis Vlasenko1-21/+19
Reduce the number of comparisons by one through the use of jb/je. This patch also corrects the comments regarding the different key lengths. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] Allow AES C/ASM implementations to coexistHerbert Xu2-0/+4
As the Crypto API now allows multiple implementations to be registered for the same algorithm, we no longer have to play tricks with Kconfig to select the right AES implementation. This patch sets the driver name and priority for all the AES implementations and removes the Kconfig conditions on the C implementation for AES. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[CRYPTO] Use standard byte order macros wherever possibleHerbert Xu2-33/+34
A lot of crypto code needs to read/write a 32-bit/64-bit words in a specific gender. Many of them open code them by reading/writing one byte at a time. This patch converts all the applicable usages over to use the standard byte order macros. This is based on a previous patch by Denis Vlasenko. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-01-09[PATCH] Fix more "if ((err = foo() < 0))" typosAlexey Dobriyan1-1/+2
Another reason to use: ret = foo(); if (ret < 0) goto out; Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds154-3662/+23532
2006-01-09powerpc: unbreak iSeries compilation againPaul Mackerras2-1/+5
We don't set CONFIG_PPC_MULTIPLATFORM on iSeries (yet). Avoid compiling in the prom_init stuff on iSeries. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Don't use KERNELBASE in add_memory()Michael Ellerman1-1/+1
In add_memory() we should be using __va() to get a virtual address. Spotted by Mike Kravetz. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09powerpc: set CONFIG_PPC_OF=y always for ARCH=powerpcPaul Mackerras3-7/+5
The CONFIG_PPC_OF symbol is used to mean that the firmware device tree access functions are available. Since we always have a device tree with ARCH=powerpc, make CONFIG_PPC_OF always Y for ARCH=powerpc. This fixes some compile errors reported by Kumar Gala, but in a different way to his patch. This also makes prom_parse.o be compiled only if CONFIG_PPC_OF so that non-OF ARCH=ppc platforms will compile. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: DABR exceptions should report the address not the PCAnton Blanchard1-3/+4
When taking a DABR exception we were reporting the PC. It makes more sense to report the address that caused the exception, and the gdb guys would like it that way. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] ppc64: POWER5+ oprofile supportAnton Blanchard1-2/+2
POWER5+ adds new PMU groups and as such needs to be treated differently by oprofile userspace. Change it to report itself as power5+. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] ppc64: Fix oprofile when compiled as a moduleAnton Blanchard2-80/+50
My recent changes to oprofile broke it when built as a module. Fix it by using an enum instead of a function pointer. This way we still retain the oprofile configuration in the cputable. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] 4/5 powerpc: Add cpufreq support for all desktop G5Benjamin Herrenschmidt1-47/+449
This patch adds cpufreq support for all desktop "tower" G5 models. The only G5 models still lacking cpufreq support at this point are the Xserve and possibly the new iMac iSight (not tested). I'll have those added soon. That patch uses the new platform functions interpreter to implement frequency and voltage switching on most models. Note that in order to find the low frequency value, I had to hack something that might now work properly on all models, so if the frequency value reported when running low speed looks bogus to you, please report it to me. (Appart from a bogus reported value, things should work fine). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] 3/5 powerpc: Add platform functions interpreterBenjamin Herrenschmidt6-42/+1743
This is the platform function interpreter itself along with the backends for UniN/U3/U4, mac-io, GPIOs and i2c. It adds the ability to execute those do-platform-* scripts in the device-tree (at least for most devices for which a backend is provided). This should replace the clock spreading hacks properly. It might also have an impact on all sort of machines since some of the scripts marked "at init" will now be executed on boot (or some other on sleep/wakeup), those will possibly do things that the kernel didn't do at all, like setting some values into some i2c devices (changing thermal sensor calibration or conversion rate) etc... Thus regression testing is MUCH welcome. Also loook for errors in dmesg. That's also why I've left rather verbose debugging enabled in this version of the patch. (I do expect some Windtunnel G4s to show some errors as they have an i2c clock chip on the PMU bus that uses some primitives that the i2c backend doesn't implement yet. I really need users that have one of those machine to come back to me so we can get that done right, though the errors themselves should be harmless, I suspect the machine might not run at full speed). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] 2/5 powerpc: Rework PowerMac i2c part 2Benjamin Herrenschmidt2-89/+247
This is the continuation of the previous patch. This one removes the old PowerMac i2c drivers (i2c-keywest and i2c-pmac-smu) and replaces them both with a single stub driver that uses the new PowerMac low i2c layer. Now that i2c-keywest is gone, the low-i2c code is extended to support interrupt driver transfers. All i2c busses now appear as platform devices. Compatibility with existing drivers should be maintained as the i2c bus names have been kept identical, except for the SMU bus but in that later case, all users has been fixed. With that patch added, matching a device node to an i2c_adapter becomes trivial. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] 1/5 powerpc: Rework PowerMac i2c part 1Benjamin Herrenschmidt4-348/+730
This is the first part of a rework of the PowerMac i2c code. It completely reworks the "low_i2c" layer. It is now more flexible, supports KeyWest, SMU and PMU i2c busses, and provides functions to match device nodes to i2c busses and adapters. This patch also extends & fix some bugs in the SMU driver related to i2c support and removes the clock spreading hacks from the pmac feature code rather than adapting them to the new API since they'll be replaced by the platform function code completely in patch 3/5 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] ppc64: fix time syscallAnton Blanchard2-29/+1
ppc64 has its own version of sys_time. It looks pretty scary, touching a whole bunch of variables without any locking or memory ordering. In fact, a recent bugreport has shown it can actually go backwards. Time to remove it and just use the generic sys_time, which is implemented on top of do_gettimeofday. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] ppc32: Put cache flush routines back into .relocate_code sectionPaul Janzen1-2/+4
In 2.6.14, we had the following definition of _GLOBAL() in include/asm-ppc/processor.h: #define _GLOBAL(n)\ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n;\ n: In 2.6.15, as part of the great powerpc merge, we moved this definition to include/asm-powerpc/ppc_asm.h, where it appears (to 32-bit code) as: #define _GLOBAL(n) \ .text; \ .stabs __stringify(n:F-1),N_FUN,0,0,n;\ .globl n; \ n: Mostly, this is fine. However, we also have the following, in arch/ppc/boot/common/util.S: .section ".relocate_code","xa" [...] _GLOBAL(flush_instruction_cache) [...] _GLOBAL(flush_data_cache) [...] The addition of the .text section definition in the definition of _GLOBAL overrides the .relocate_code section definition. As a result, these two functions don't end up in .relocate_code, so they don't get relocated correctly, and the boot fails. There's another suspicious-looking usage at kernel/swsusp.S:37 that someone should look into. I did not exhaustively search the source tree, though. The following is the minimal patch that fixes the immediate problem. I could easily be convinced that the _GLOBAL definition should be modified to remove the ".text;" line either instead of, or in addition to, this fix. Signed-off-by: Paul Janzen <pcj@linux.sez.to> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: set irq affinity for running threadsArnd Bergmann4-16/+40
For far, all SPU triggered interrupts always end up on the first SMT thread, which is a bad solution. This patch implements setting the affinity to the CPU that was running last when entering execution on an SPU. This should result in a significant reduction in IPI calls and better cache locality for SPE thread specific data. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: fix sparse warningsArnd Bergmann4-6/+5
One local variable is missing an __iomem modifier, in another place, we pass a completely unused argument with a missing __user modifier. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: abstract priv1 register access.Arnd Bergmann5-129/+208
In a hypervisor based setup, direct access to the first priviledged register space can typically not be allowed to the kernel and has to be implemented through hypervisor calls. As suggested by Masato Noguchi, let's abstract the register access trough a number of function calls. Since there is currently no public specification of actual hypervisor calls to implement this, I only provide a place that makes it easier to hook into. Cc: Masato Noguchi <Masato.Noguchi@jp.sony.com> Cc: Geoff Levand <geoff.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: move spu_run call to its own fileArnd Bergmann4-153/+160
The logic for sys_spu_run keeps growing and it does not really belong into file.c any more since we moved away from using regular file operations to our own syscall. No functional change in here. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: clean up use of bitopsArnd Bergmann4-13/+12
checking bits manually might not be synchonized with the use of set_bit/clear_bit. Make sure we always use the correct bitops by removing the unnecessary identifiers. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: fix spufs_fill_dir error pathArnd Bergmann1-35/+38
If creating one entry failed in spufs_fill_dir, we never cleaned up the freshly created entries. Fix this by calling the cleanup function on error. Noticed by Al Viro. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: dont leak directories in failed spu_createArnd Bergmann1-17/+37
If get_unused_fd failed in sys_spu_create, we never cleaned up the created directory. Fix that by restructuring the error path. Noticed by Al Viro. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs fix spu_acquire_runnable error pathArnd Bergmann1-2/+2
When spu_activate fails in spu_acquire_runnable, the state must still be SPU_STATE_SAVED, we were incorrectly setting it to SPU_STATE_RUNNABLE. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: serialize sys_spu_run per spuArnd Bergmann3-5/+12
During an earlier cleanup, we lost the serialization of multiple spu_run calls performed on the same spu_context. In order to get this back, introduce a mutex in the spu_context that is held inside of spu_run. Noticed by Al Viro. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: check for proper file pointer in sys_spu_runArnd Bergmann3-3/+5
Only checking for SPUFS_MAGIC is not reliable, because it might not be unique in theory. Worse than that, we accidentally allow spu_run to be performed on any file in spufs, not just those returned from spu_create as intended. Noticed by Al Viro. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: dont hold root->isem in spu_forgetArnd Bergmann1-10/+10
spu_forget will do mmput on the DMA address space, which can lead to lots of other stuff getting triggered. We better not hold a semaphore here that we might need in the process. Noticed by Al Viro. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] spufs: fix locking in spu_acquire_runnableArnd Bergmann1-4/+6
We need to check for validity of owner under down_write, down_read is not enough. Noticed by Al Viro. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] cell: enable pause(0) in cpu_idleArnd Bergmann9-7/+314
This patch enables support for pause(0) power management state for the Cell Broadband Processor, which is import for power efficient operation. The pervasive infrastructure will in the future enable us to introduce more functionality specific to the Cell's pervasive unit. From: Maximino Aguilar <maguilar@us.ibm.com> Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: fixing compile issue with !CONFIG_PCI in legacy_serial.cKumar Gala1-1/+11
Only build in support for ISA and PCI cases if we have enabled CONFIG_ISA and CONFIG_PCI. Additionally, isa_bridge is a global so we shouldn't use it a parameter name since it gets redefined to NULL when !CONFIG_PCI. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Fix search for the main interrupt controllerHaren Myneni1-6/+9
At present, we are not looking at all interrupt controller nodes in the device tree even though the proper node was not found. This is causing the system panic. The attached patch will scan all nodes until it finds the proper interrupt controller type. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Call find_legacy_serial_ports() if we enable CONFIG_SERIAL_8250Kumar Gala3-4/+3
In setup_arch and setup_system call find_legacy_serial_ports() if we build in support for 8250 serial ports instead of basing it on PPC_MULTIPLATFORM. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: added a udbg_progressKumar Gala2-7/+7
Added a common udbg_progress for use by ppc_md.progress() Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Add the ability to handle SOC ports in legacy_serialKumar Gala1-10/+52
Add the ability to configure and initialize legacy 8250 serials ports on an SOC bus. Also, fixed an issue that we would not configure any serial ports if "linux,stdout-path" was not found. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Loosen udbg_probe_uart_speed sanity checkingKumar Gala1-1/+1
The checking of the baudrate in udbg_probe_uart_speed was too tight and would cause reporting back of the default baud rate in cases where the computed speed was valid. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: don't add memory to empty node/zoneMike Kravetz1-5/+14
The system will oops if an attempt is made to add memory to an empty node/zone. This patch prevents adding memory to an empty node. The code to dynamically add a node/zone is non-trivial. This patch is temporary and will be removed when the ability to dynamically add a node/zone is complete. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: fix two build warningsArnd Bergmann2-2/+1
Building the arch/powerpc tree currently gives me two warnings with gcc-4.0: arch/powerpc/mm/imalloc.c: In function '__im_get_area': arch/powerpc/mm/imalloc.c:225: warning: 'tmp' may be used uninitialized in this function arch/powerpc/mm/hugetlbpage.c: In function 'hugetlb_get_unmapped_area': arch/powerpc/mm/hugetlbpage.c:608: warning: unused variable 'vma' both fixes are trivial. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-08[PATCH] Make vm86 support optionalMatt Mackall3-1/+5
This adds an option to remove vm86 support under CONFIG_EMBEDDED. Saves about 5k. This version eliminates most of the #ifdefs of the previous version and instead uses function stubs in vm86.h. Also, release_vm86_irqs is moved from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs can live together. $ size vmlinux-baseline vmlinux-novm86 text data bss dec hex filename 2920821 523232 190652 3634705 377611 vmlinux-baseline 2916268 523100 190492 3629860 376324 vmlinux-novm86 Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] tiny: Make *[ug]id16 support optionalMatt Mackall17-65/+0
Configurable 16-bit UID and friends support This allows turning off the legacy 16 bit UID interfaces on embedded platforms. text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3328268 529040 190556 4047864 3dc3f8 vmlinux From: Adrian Bunk <bunk@stusta.de> UID16 was accidentially disabled for !EMBEDDED. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] tiny: Make x86 doublefault handling optionalMatt Mackall2-1/+4
This adds configurable support for doublefault reporting on x86 add/remove: 0/3 grow/shrink: 0/1 up/down: 0/-13048 (-13048) function old new delta cpu_init 846 786 -60 doublefault_fn 188 - -188 doublefault_stack 4096 - -4096 doublefault_tss 8704 - -8704 Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] Make apm buildable without legacy pmDave Jones2-1/+5
APM doesn't _need_ the PM_LEGACY junk, so remove it's dependancy from Kconfig, and ifdef the junk in the code. Whilst the ifdefs are ugly, when the legacy stuff gets ripped out so will the ifdefs. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] Split out screen_info from tty.hBrian Gerst3-41/+2
This makes it possible for boot code to use screen_info without dragging in all of tty.h. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] /dev/mem: validate mmap requestsBjorn Helgaas1-49/+111
Add a hook so architectures can validate /dev/mem mmap requests. This is analogous to validation we already perform in the read/write paths. The identity mapping scheme used on ia64 requires that each 16MB or 64MB granule be accessed with exactly one attribute (write-back or uncacheable). This avoids "attribute aliasing", which can cause a machine check. Sample problem scenario: - Machine supports VGA, so it has uncacheable (UC) MMIO at 640K-768K - efi_memmap_init() discards any write-back (WB) memory in the first granule - Application (e.g., "hwinfo") mmaps /dev/mem, offset 0 - hwinfo receives UC mapping (the default, since memmap says "no WB here") - Machine check abort (on chipsets that don't support UC access to WB memory, e.g., sx1000) In the scenario above, the only choices are - Use WB for hwinfo mmap. Can't do this because it causes attribute aliasing with the UC mapping for the VGA MMIO space. - Use UC for hwinfo mmap. Can't do this because the chipset may not support UC for that region. - Disallow the hwinfo mmap with -EINVAL. That's what this patch does. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] remove gcc-2 checksAndrew Morton9-34/+11
Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] Don't attempt to power off if power off is not implementedEric W. Biederman3-0/+11
The problem. It is expected that /sbin/halt -p works exactly like /sbin/halt, when the kernel does not implement power off functionality. The kernel can do a lot of work in the reboot notifiers and in device_shutdown before we even get to machine_power_off. Some of that shutdown is not safe if you are leaving the power on, and it definitely gets in the way of using sysrq or pressing ctrl-alt-del. Since the shutdown happens in generic code there is no way to fix this in architecture specific code :( Some machines are kernel oopsing today because of this. The simple solution is to turn LINUX_REBOOT_CMD_POWER_OFF into LINUX_REBOOT_CMD_HALT if power_off functionality is not implemented. This has the unfortunate side effect of disabling the power off functionality on architectures that leave pm_power_off to null and still implement something in machine_power_off. And it will break the build on some architectures that don't have a pm_power_off variable at all. On both counts I say tough. For architectures like alpha that don't implement the pm_power_off variable pm_power_off is declared in linux/pm.h and it is a generic part of our power management code, and all architectures should implement it. For architectures like parisc that have a default power off method in machine_power_off if pm_power_off is not implemented or fails. It is easy enough to set the pm_power_off variable. And nothing bad happens there, the machines just stop powering off. The current semantics are impossible without a flag at the top level so we can avoid the problem code if a power off is not implemented. pm_power_off is as good a flag as any with the bonus that it works without modification on at least x86, x86_64, powerpc, and ppc today. Andrew can you pick this up and put this in the mm tree. Kernels that don't compile or don't power off seem saner than kernels that oops or panic. Until we get the arch specific patches for the problem architectures this probably isn't smart to push into the stable kernel. Unfortunately I don't have the time at the moment to walk through every architecture and make them work. And even if I did I couldn't test it :( From: Hirokazu Takata <takata@linux-m32r.org> Add pm_power_off() for build fix of arch/m32r/kernel/process.c. From: Miklos Szeredi <miklos@szeredi.hu> UML build fix Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] Add block_device_operations.getgeo block device methodChristoph Hellwig1-9/+12
HDIO_GETGEO is implemented in most block drivers, and all of them have to duplicate the code to copy the structure to userspace, as well as getting the start sector. This patch moves that to common code [1] and adds a ->getgeo method to fill out the raw kernel hd_geometry structure. For many drivers this means ->ioctl can go away now. [1] the s390 block drivers are odd in this respect. xpram sets ->start to 4 always which seems more than odd, and the dasd driver shifts the start offset around, probably because of it's non-standard sector size. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@suse.de> Cc: <mike.miller@hp.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] use ptrace_get_task_struct in various placesChristoph Hellwig10-210/+57
The ptrace_get_task_struct() helper that I added as part of the ptrace consolidation is useful in variety of places that currently opencode it. Switch them to the common helpers. Add a ptrace_traceme() helper that needs to be explicitly called, and simplify the ptrace_get_task_struct() interface. We don't need the request argument now, and we return the task_struct directly, using ERR_PTR() for error returns. It's a bit more code in the callers, but we have two sane routines that do one thing well now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] move rtc_interrupt() prototype to rtc.hAdrian Bunk4-9/+7
This patch moves the rtc_interrupt() prototype to rtc.h and removes the prototypes from C files. It also renames static rtc_interrupt() functions in arch/arm/mach-integrator/time.c and arch/sh64/kernel/time.c to avoid compile problems. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Gortmaker <p_gortmaker@yahoo.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.