| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8c0 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes I've been accruing over the last few weeks, none
of them have been severe enough to warrant flushing the queue but it's
been long enough now that it's a good idea to send them in.
A handful of them are fixups for QSPI DT/bindings/compatibles, some
smaller fixes for system DMA clock control and TMU interrupts on i.MX,
a handful of fixes for OMAP, including a fix for DSI (display) on
omap5"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
ARM: dts: vfxxx: Add syscon compatible with OCOTP
ARM: dts: imx6q-logicpd: Fix broken PWM
arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
ARM: dts: imx7ulp: Correct gpio ranges
ARM: dts: ls1021a: fix QuadSPI-memory reg range
arm64: defconfig: Enable ptn5150 extcon driver
arm64: defconfig: Enable USB gadget with configfs
ARM: configs: Update Integrator defconfig
ARM: dts: omap5: Fix DSI base address and clocks
...
|
|
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.9, please pull the following:
- Florian fixes the Broadcom QSPI controller binding such that the most
specific compatible string is the left most one, and all existing
in-tree users are updated as well.
* tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
i.MX fixes for 5.9, round 2:
- Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node.
- Correct 'ahb' clock for i.MX8MP SDMA1 in device tree.
- Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX.
* tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
Link: https://lore.kernel.org/r/20200909143844.GA25109@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Fixes for omaps for v5.9-rc cycle
Few fixes for omap based devices:
- Fix of_clk_get() error handling for omap-iommu
- Fix missing audio pinctrl entries for logicpd boards
- Fix video for logicpd-som-lv after switch to generic panels
- Fix omap5 DSI clocks base
* tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5: Fix DSI base address and clocks
ARM: dts: logicpd-som-lv-baseboard: Fix missing video
ARM: dts: logicpd-som-lv-baseboard: Fix broken audio
ARM: dts: logicpd-torpedo-baseboard: Fix broken audio
ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm()
Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
|
|
Pull OpenRISC fixes from Stafford Horne:
"Fixes for compile issues pointed out by kbuild and one bug I found in
initrd with the 5.9 patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix issue with get_user for 64-bit values
openrisc: Fix cache API compile issue when not inlining
openrisc: Reserve memblock for initrd
|
|
Don't ignore return values in rsm_load_state_64/32 to avoid
loading invalid state from SMM state area if it was tampered with
by the guest.
This is primarly intended to avoid letting guest set bits in EFER
(like EFER.SVME when nesting is disabled) by manipulating SMM save area.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* check that guest is 64 bit guest, otherwise the SVM related fields
in the smm state area are not defined
* If the SMM area indicates that SMM interrupted a running guest,
check that EFER.SVME which is also saved in this area is set, otherwise
the guest might have tampered with SMM save area, and so indicate
emulation failure which should triple fault the guest.
* Check that that guest CPUID supports SVM (due to the same issue as above)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This code was missing and was forcing the L2 run with L1's msr
permission bitmap
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently code in svm_set_nested_state copies the current vmcb control
area to L1 control area (hsave->control), under assumption that
it mostly reflects the defaults that kvm choose, and later qemu
overrides these defaults with L2 state using standard KVM interfaces,
like KVM_SET_REGS.
However nested GIF (which is AMD specific thing) is by default is true,
and it is copied to hsave area as such.
This alone is not a big deal since on VMexit, GIF is always set to false,
regardless of what it was on VM entry. However in nested_svm_vmexit we
were first were setting GIF to false, but then we overwrite the control
fields with value from the hsave area. (including the nested GIF field
itself if GIF virtualization is enabled).
Now on normal vm entry this is not a problem, since GIF is usually false
prior to normal vm entry, and this is the value that copied to hsave,
and then restored, but this is not always the case when the nested state
is loaded as explained above.
To fix this issue, move svm_set_gif after we restore the L1 control
state in nested_svm_vmexit, so that even with wrong GIF in the
saved L1 control area, we still clear GIF as the spec says.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A build failure was raised by kbuild with the following error.
drivers/android/binder.c: Assembler messages:
drivers/android/binder.c:3861: Error: unrecognized keyword/register name `l.lwz ?ap,4(r24)'
drivers/android/binder.c:3866: Error: unrecognized keyword/register name `l.addi ?ap,r0,0'
The issue is with 64-bit get_user() calls on openrisc. I traced this to
a problem where in the internally in the get_user macros there is a cast
to long __gu_val this causes GCC to think the get_user call is 32-bit.
This binder code is really long and GCC allocates register r30, which
triggers the issue. The 64-bit get_user asm tries to get the 64-bit pair
register, which for r30 overflows the general register names and returns
the dummy register ?ap.
The fix here is to move the temporary variables into the asm macros. We
use a 32-bit __gu_tmp for 32-bit and smaller macro and a 64-bit tmp in
the 64-bit macro. The cast in the 64-bit macro has a trick of casting
through __typeof__((x)-(x)) which avoids the below warning. This was
barrowed from riscv.
arch/openrisc/include/asm/uaccess.h:240:8: warning: cast to pointer from integer of different size
I tested this in a small unit test to check reading between 64-bit and
32-bit pointers to 64-bit and 32-bit values in all combinations. Also I
ran make C=1 to confirm no new sparse warnings came up. It all looks
clean to me.
Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
|
|
Merge commit 26d05b368a5c0 ("Merge branch 'kvm-async-pf-int' into HEAD")
tried to adapt the new interrupt based async PF mechanism to the newly
introduced IDTENTRY magic but unfortunately it missed the fact that
DEFINE_IDTENTRY_SYSVEC() doesn't call ack_APIC_irq() on its own and
all DEFINE_IDTENTRY_SYSVEC() users have to call it manually.
As the result all multi-CPU KVM guest hang on boot when
KVM_FEATURE_ASYNC_PF_INT is present. The breakage went unnoticed because no
KVM userspace (e.g. QEMU) currently set it (and thus async PF mechanism
is currently disabled) but we're about to change that.
Fixes: 26d05b368a5c0 ("Merge branch 'kvm-async-pf-int' into HEAD")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908135350.355053-3-vkuznets@redhat.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
DEFINE_IDTENTRY_SYSVEC() already contains irqentry_enter()/
irqentry_exit().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908135350.355053-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
According to SDM 27.2.4, Event delivery causes an APIC-access VM exit.
Don't report internal error and freeze guest when event delivery causes
an APIC-access exit, it is handleable and the event will be re-injected
during the next vmentry.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm->next_rip is reset in svm_vcpu_run() only after calling
svm_exit_handlers_fastpath(), which will cause SVM's
skip_emulated_instruction() to write a stale RIP.
We can move svm_exit_handlers_fastpath towards the end of
svm_vcpu_run(). To align VMX with SVM, keep svm_complete_interrupts()
close as well.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paul K. <kronenpj@kronenpj.dyndns.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Also move vmcb_mark_all_clean before any possible write to the VMCB.
- Paolo]
|
|
Even without in-kernel LAPIC we should allow writing '0' to
MSR_KVM_ASYNC_PF_EN as we're not enabling the mechanism. In
particular, QEMU with 'kernel-irqchip=off' fails to start
a guest with
qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0x0
Fixes: 9d3c447c72fb2 ("KVM: X86: Fix async pf caused null-ptr-deref")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200911093147.484565-1-vkuznets@redhat.com>
[Actually commit the version proposed by Sean Christopherson. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There may be many encrypted regions that need to be unregistered when a
SEV VM is destroyed. This can lead to soft lockups. For example, on a
host running 4.15:
watchdog: BUG: soft lockup - CPU#206 stuck for 11s! [t_virtual_machi:194348]
CPU: 206 PID: 194348 Comm: t_virtual_machi
RIP: 0010:free_unref_page_list+0x105/0x170
...
Call Trace:
[<0>] release_pages+0x159/0x3d0
[<0>] sev_unpin_memory+0x2c/0x50 [kvm_amd]
[<0>] __unregister_enc_region_locked+0x2f/0x70 [kvm_amd]
[<0>] svm_vm_destroy+0xa9/0x200 [kvm_amd]
[<0>] kvm_arch_destroy_vm+0x47/0x200
[<0>] kvm_put_kvm+0x1a8/0x2f0
[<0>] kvm_vm_release+0x25/0x30
[<0>] do_exit+0x335/0xc10
[<0>] do_group_exit+0x3f/0xa0
[<0>] get_signal+0x1bc/0x670
[<0>] do_signal+0x31/0x130
Although the CLFLUSH is no longer issued on every encrypted region to be
unregistered, there are no other changes that can prevent soft lockups for
very large SEV VMs in the latest kernel.
Periodically schedule if necessary. This still holds kvm->lock across the
resched, but since this only happens when the VM is destroyed this is
assumed to be acceptable.
Signed-off-by: David Rientjes <rientjes@google.com>
Message-Id: <alpine.DEB.2.23.453.2008251255240.2987727@chino.kir.corp.google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MIPS defines two kvm types:
#define KVM_VM_MIPS_TE 0
#define KVM_VM_MIPS_VZ 1
In Documentation/virt/kvm/api.rst it is said that "You probably want to
use 0 as machine type", which implies that type 0 be the "automatic" or
"default" type. And, in user-space libvirt use the null-machine (with
type 0) to detect the kvm capability, which returns "KVM not supported"
on a VZ platform.
I try to fix it in QEMU but it is ugly:
https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html
And Thomas Huth suggests me to change the definition of kvm type:
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html
So I define like this:
#define KVM_VM_MIPS_AUTO 0
#define KVM_VM_MIPS_VZ 1
#define KVM_VM_MIPS_TE 2
Since VZ and TE cannot co-exists, using type 0 on a TE platform will
still return success (so old user-space tools have no problems on new
kernels); the advantage is that using type 0 on a VZ platform will not
return failure. So, the only problem is "new user-space tools use type
2 on old kernels", but if we treat this as a kernel bug, we can backport
this patch to old stable kernels.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When kvm_mmu_get_page() gets a page with unsynced children, the spt
pagetable is unsynchronized with the guest pagetable. But the
guest might not issue a "flush" operation on it when the pagetable
entry is changed from zero or other cases. The hypervisor has the
responsibility to synchronize the pagetables.
KVM behaved as above for many years, But commit 8c8560b83390
("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
inadvertently included a line of code to change it without giving any
reason in the changelog. It is clear that the commit's intention was to
change KVM_REQ_TLB_FLUSH -> KVM_REQ_TLB_FLUSH_CURRENT, so we don't
needlessly flush other contexts; however, one of the hunks changed
a nearby KVM_REQ_MMU_SYNC instead. This patch changes it back.
Link: https://lore.kernel.org/lkml/20200320212833.3507-26-sean.j.christopherson@intel.com/
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20200902135421.31158-1-jiangshanlai@gmail.com>
fixes: 8c8560b83390 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A minor fix for the update of VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL field
in exit_ctls_high.
Fixes: 03a8871add95 ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL
VM-{Entry,Exit} control")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-5-chenyi.qiang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
check the allocation of per-cpu __pv_cpu_mask. Initialize ops only when
successful.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <d59f05df-e6d3-3d31-a036-cc25a2b2f33f@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When L2 uses PAE, L0 intercepts of L2 writes to CR0/CR3/CR4 call
load_pdptrs to read the possibly updated PDPTEs from the guest
physical address referenced by CR3. It loads them into
vcpu->arch.walk_mmu->pdptrs and sets VCPU_EXREG_PDPTR in
vcpu->arch.regs_dirty.
At the subsequent assumed reentry into L2, the mmu will call
vmx_load_mmu_pgd which calls ept_load_pdptrs. ept_load_pdptrs sees
VCPU_EXREG_PDPTR set in vcpu->arch.regs_dirty and loads
VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. This all works
if the L2 CRn write intercept always resumes L2.
The resume path calls vmx_check_nested_events which checks for
exceptions, MTF, and expired VMX preemption timers. If
vmx_check_nested_events finds any of these conditions pending it will
reflect the corresponding exit into L1. Live migration at this point
would also cause a missed immediate reentry into L2.
After L1 exits, vmx_vcpu_run calls vmx_register_cache_reset which
clears VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. When L2 next
resumes, ept_load_pdptrs finds VCPU_EXREG_PDPTR clear in
vcpu->arch.regs_dirty and does not load VMCS02.GUEST_PDPTRn from
vcpu->arch.walk_mmu->pdptrs[]. prepare_vmcs02 will then load
VMCS02.GUEST_PDPTRn from vmcs12->pdptr0/1/2/3 which contain the stale
values stored at last L2 exit. A repro of this bug showed L2 entering
triple fault immediately due to the bad VMCS02.GUEST_PDPTRn values.
When L2 is in PAE paging mode add a call to ept_load_pdptrs before
leaving L2. This will update VMCS02.GUEST_PDPTRn if they are dirty in
vcpu->arch.walk_mmu->pdptrs[].
Tested:
kvm-unit-tests with new directed test: vmx_mtf_pdpte_test.
Verified that test fails without the fix.
Also ran Google internal VMM with an Ubuntu 16.04 4.4.0-83 guest running a
custom hypervisor with a 32-bit Windows XP L2 guest using PAE. Prior to fix
would repro readily. Ran 14 simultaneous L2s for 140 iterations with no
failures.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200820230545.2411347-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/arm64 fixes for Linux 5.9, take #1
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced
(dirty logging, for example)
- Fix tracing output of 64bit values
|
|
The string was incorrectly defined before from least to most specific,
swap the compatible strings accordingly.
Fixes: ff73917d38a6 ("ARM64: dts: Add QSPI Device Tree node for NS2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The string was incorrectly defined before from least to most
specific, swap the compatible strings accordingly.
Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The string was incorrectly defined before from least to most
specific, swap the compatible strings accordingly.
Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The string was incorrectly defined before from least to most specific,
swap the compatible strings accordingly.
Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
I found this when compiling a kbuild random config with GCC 11. The
config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS
-fno-inline-functions-called-once. This causes the call to cache_loop in
cache.c to not be inlined causing the below compile error.
In file included from arch/openrisc/mm/cache.c:13:
arch/openrisc/mm/cache.c: In function 'cache_loop':
./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints
16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \
| ^~~~~~~
arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
25 | mtspr(reg, line);
| ^~~~~
./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm'
16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \
| ^~~~~~~
arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
25 | mtspr(reg, line);
| ^~~~~
make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1
The asm constraint "K" requires a immediate constant argument to mtspr,
however because of no inlining a register argument is passed causing a
failure. Fix this by using __always_inline.
Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Recently OpenRISC added support for external initrd images, but I found
some instability when using larger buildroot initrd images. It turned
out that I forgot to reserve the memblock space for the initrd image.
This patch fixes the instability issue by reserving memblock space.
Fixes: ff6c923dbec3 ("openrisc: Add support for external initrd images")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
|
|
Pull x86 fixes from Ingo Molnar:
- more generic entry code ABI fallout
- debug register handling bugfixes
- fix vmalloc mappings on 32-bit kernels
- kprobes instrumentation output fix on 32-bit kernels
- fix over-eager WARN_ON_ONCE() on !SMAP hardware
- NUMA debugging fix
- fix Clang related crash on !RETPOLINE kernels
* tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Unbreak 32bit fast syscall
x86/debug: Allow a single level of #DB recursion
x86/entry: Fix AC assertion
tracing/kprobes, x86/ptrace: Fix regs argument order for i386
x86, fakenuma: Fix invalid starting node ID
x86/mm/32: Bring back vmalloc faulting on x86_32
x86/cmdline: Disable jump tables for cmdline.c
|
|
Pull ARC fixes from Vineet Gupta:
- HSDK-4xd Dev system: perf driver updates for sampling interrupt
- HSDK* Dev System: Ethernet broken [Evgeniy Didin]
- HIGHMEM broken (2 memory banks) [Mike Rapoport]
- show_regs() rewrite once and for all
- Other minor fixes
* tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
arc: fix memory initialization for systems with two memory banks
irqchip/eznps: Fix build error for !ARC700 builds
ARC: show_regs: fix r12 printing and simplify
ARC: HSDK: wireup perf irq
ARC: perf: don't bail setup if pct irq missing in device-tree
ARC: pgalloc.h: delete a duplicated word + other fixes
|
|
The pad QSPI1B_SCLK mux mode 0x1 is for function UART3_DTE_TX,
correct the mux mode.
Fixes: 743636f25f1d ("ARM: dts: imx: add pin function header for imx6sx")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Correct sdma1 ahb clk, otherwise wrong 1:1 clk ratio will be chosed so
that sdma1 function broken. sdma1 should use 1:2 clk, while sdma2/3 use
1:1.
Fixes: 6d9b8d20431f ("arm64: dts: freescale: Add i.MX8MP dtsi support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull s390 fixes from Vasily Gorbik:
- Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken
because of a typo
- Update defconfigs
* tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig
|
|
Pull arm64 fixes from Catalin Marinas:
- Fix the loading of modules built with binutils-2.35. This version
produces writable and executable .text.ftrace_trampoline section
which is rejected by the kernel.
- Remove the exporting of cpu_logical_map() as the Tegra driver has now
been fixed and no longer uses this function.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE
arm64: Remove exporting cpu_logical_map symbol
|
|
Pull MIPS fixes from Thomas Bogendoerfer:
"A few MIPS fixes:
- fallthrough fallout fix
- BMIPS fixes
- MSA fix to avoid leaking MSA register contents
- Loongson perf and cpu feature fix
- SNI interrupt fix"
* tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: SNI: Fix SCSI interrupt
MIPS: add missing MSACSR and upper MSA initialization
MIPS: perf: Fix wrong check condition of Loongson event IDs
mips/oprofile: Fix fallthrough placement
MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h
MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores
MIPS: mm: BMIPS5000 has inclusive physical caches
MIPS: Loongson64: Do not override watch and ejtag feature
|
|
Andy reported that the syscall treacing for 32bit fast syscall fails:
# ./tools/testing/selftests/x86/ptrace_syscall_32
...
[RUN] SYSEMU
[FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732)
...
[RUN] SYSCALL
[FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732)
The eason is that the conversion to generic entry code moved the retrieval
of the sixth argument (EBP) after the point where the syscall entry work
runs, i.e. ptrace, seccomp, audit...
Unbreak it by providing a split up version of syscall_enter_from_user_mode().
- syscall_enter_from_user_mode_prepare() establishes state and enables
interrupts
- syscall_enter_from_user_mode_work() runs the entry work
Replace the call to syscall_enter_from_user_mode() in the 32bit fast
syscall C-entry with the split functions and stick the EBP retrieval
between them.
Fixes: 27d6b4d14f5c ("x86/entry: Use generic syscall entry function")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
|
|
Trying to clear DR7 around a #DB from usermode malfunctions if the tasks
schedules when delivering SIGTRAP.
Rather than trying to define a special no-recursion region, just allow a
single level of recursion. The same mechanism is used for NMI, and it
hasn't caused any problems yet.
Fixes: 9f58fdde95c9 ("x86/db: Split out dr6/7 handling")
Reported-by: Kyle Huey <me@kylehuey.com>
Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/8b9bd05f187231df008d48cf818a6a311cbd5c98.1597882384.git.luto@kernel.org
Link: https://lore.kernel.org/r/20200902133200.726584153@infradead.org
|
|
The WARN added in commit 3c73b81a9164 ("x86/entry, selftests: Further
improve user entry sanity checks") unconditionally triggers on a IVB
machine because it does not support SMAP.
For !SMAP hardware the CLAC/STAC instructions are patched out and thus if
userspace sets AC, it is still have set after entry.
Fixes: 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200902133200.666781610@infradead.org
|
|
On i386, the order of parameters passed on regs is eax,edx,and ecx
(as per regparm(3) calling conventions).
Change the mapping in regs_get_kernel_argument(), so that arg1=ax
arg2=dx, and arg3=cx.
Running the selftests testcase kprobes_args_use.tc shows the result
as passed.
Fixes: 3c88ee194c28 ("x86: ptrace: Add function argument access API")
Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200828113242.GA1424@cosmos
|
|
Commit 196f878a7ac2e (" KVM: arm/arm64: Signal SIGBUS when stage2 discovers
hwpoison memory") modifies user_mem_abort() to send a SIGBUS signal when
the fault IPA maps to a hwpoisoned page. Commit 1559b7583ff6 ("KVM:
arm/arm64: Re-check VMA on detecting a poisoned page") changed
kvm_send_hwpoison_signal() to use the page shift instead of the VMA because
at that point the code had already released the mmap lock, which means
userspace could have modified the VMA.
If userspace uses hugetlbfs for the VM memory, user_mem_abort() tries to
map the guest fault IPA using block mappings in stage 2. That is not always
possible, if, for example, userspace uses dirty page logging for the VM.
Update the page shift appropriately in those cases when we downgrade the
stage 2 entry from a block mapping to a page.
Fixes: 1559b7583ff6 ("KVM: arm/arm64: Re-check VMA on detecting a poisoned page")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20200901133357.52640-2-alexandru.elisei@arm.com
|
|
Owing to their ARMv7 origins, the trace events are truncating most
address values to 32bits. That's not really helpful.
Expand the printing of such values to their full glory.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
For the obscure cases where PMD and PUD are the same size
(64kB pages with 42bit VA, for example, which results in only
two levels of page tables), we can't map anything as a PUD,
because there is... erm... no PUD to speak of. Everything is
either a PMD or a PTE.
So let's only try and map a PUD when its size is different from
that of a PMD.
Cc: stable@vger.kernel.org
Fixes: b8e0ba7c8bea ("KVM: arm64: Add support for creating PUD hugepages at stage 2")
Reported-by: Gavin Shan <gshan@redhat.com>
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Commit:
cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability")
uses "-1" as the starting node ID, which causes the strange kernel log as
follows, when "numa=fake=32G" is added to the kernel command line:
Faking node -1 at [mem 0x0000000000000000-0x0000000893ffffff] (35136MB)
Faking node 0 at [mem 0x0000001840000000-0x000000203fffffff] (32768MB)
Faking node 1 at [mem 0x0000000894000000-0x000000183fffffff] (64192MB)
Faking node 2 at [mem 0x0000002040000000-0x000000283fffffff] (32768MB)
Faking node 3 at [mem 0x0000002840000000-0x000000303fffffff] (32768MB)
And finally the kernel crashes:
BUG: Bad page state in process swapper pfn:00011
page:(____ptrval____) refcount:0 mapcount:1 mapping:(____ptrval____) index:0x55cd7e44b270 pfn:0x11
failed to read mapping contents, not a valid kernel address?
flags: 0x5(locked|uptodate)
raw: 0000000000000005 000055cd7e44af30 000055cd7e44af50 0000000100000006
raw: 000055cd7e44b270 000055cd7e44b290 0000000000000000 000055cd7e44b510
page dumped because: page still charged to cgroup
page->mem_cgroup:000055cd7e44b510
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-rc2 #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
Call Trace:
dump_stack+0x57/0x80
bad_page.cold+0x63/0x94
__free_pages_ok+0x33f/0x360
memblock_free_all+0x127/0x195
mem_init+0x23/0x1f5
start_kernel+0x219/0x4f5
secondary_startup_64+0xb6/0xc0
Fix this bug via using 0 as the starting node ID. This restores the
original behavior before cc9aec03e58f.
[ mingo: Massaged the changelog. ]
Fixes: cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200904061047.612950-1-ying.huang@intel.com
|
|
Pull misc build failure fixes from Mike Rapoport:
"Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze.
Some configurations of ia64 and microblaze use min_low_pfn and
max_low_pfn in pfn_valid(). This causes build failures for modules
that use pfn_valid().
The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
microblaze"
* tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
ia64: fix min_low_pfn/max_low_pfn build errors
microblaze: fix min_low_pfn/max_low_pfn build errors
|
|
On RM400(a20r) machines ISA and SCSI interrupts share the same interrupt
line. Commit 49e6e07e3c80 ("MIPS: pass non-NULL dev_id on shared
request_irq()") accidently dropped the IRQF_SHARED bit, which breaks
registering SCSI interrupt. Put back IRQF_SHARED and add dev_id for
ISA interrupt.
Fixes: 49e6e07e3c80 ("MIPS: pass non-NULL dev_id on shared request_irq()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
In cc97ab235f3f ("MIPS: Simplify FP context initialization), init_fp_ctx
just initialize the fp/msa context, and own_fp_inatomic just restore
FCSR and 64bit FP regs from it, but miss MSACSR and upper MSA regs for
MSA, so MSACSR and MSA upper regs's value from previous task on current
cpu can leak into current task and cause unpredictable behavior when MSA
context not initialized.
Fixes: cc97ab235f3f ("MIPS: Simplify FP context initialization")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
One can not simply remove vmalloc faulting on x86-32. Upstream
commit: 7f0a002b5a21 ("x86/mm: remove vmalloc faulting")
removed it on x86 alltogether because previously the
arch_sync_kernel_mappings() interface was introduced. This interface
added synchronization of vmalloc/ioremap page-table updates to all
page-tables in the system at creation time and was thought to make
vmalloc faulting obsolete.
But that assumption was incredibly naive.
It turned out that there is a race window between the time the vmalloc
or ioremap code establishes a mapping and the time it synchronizes
this change to other page-tables in the system.
During this race window another CPU or thread can establish a vmalloc
mapping which uses the same intermediate page-table entries (e.g. PMD
or PUD) and does no synchronization in the end, because it found all
necessary mappings already present in the kernel reference page-table.
But when these intermediate page-table entries are not yet
synchronized, the other CPU or thread will continue with a vmalloc
address that is not yet mapped in the page-table it currently uses,
causing an unhandled page fault and oops like below:
BUG: unable to handle page fault for address: fe80c000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pde = 33183067 *pte = a8648163
Oops: 0002 [#1] SMP
CPU: 1 PID: 13514 Comm: cve-2017-17053 Tainted: G
...
Call Trace:
ldt_dup_context+0x66/0x80
dup_mm+0x2b3/0x480
copy_process+0x133b/0x15c0
_do_fork+0x94/0x3e0
__ia32_sys_clone+0x67/0x80
__do_fast_syscall_32+0x3f/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
EIP: 0xb7eef549
So the arch_sync_kernel_mappings() interface is racy, but removing it
would mean to re-introduce the vmalloc_sync_all() interface, which is
even more awful. Keep arch_sync_kernel_mappings() in place and catch
the race condition in the page-fault handler instead.
Do a partial revert of above commit to get vmalloc faulting on x86-32
back in place.
Fixes: 7f0a002b5a21 ("x86/mm: remove vmalloc faulting")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200902155904.17544-1-joro@8bytes.org
|
|
When CONFIG_RETPOLINE is disabled, Clang uses a jump table for the
switch statement in cmdline_find_option (jump tables are disabled when
CONFIG_RETPOLINE is enabled). This function is called very early in boot
from sme_enable() if CONFIG_AMD_MEM_ENCRYPT is enabled. At this time,
the kernel is still executing out of the identity mapping, but the jump
table will contain virtual addresses.
Fix this by disabling jump tables for cmdline.c when AMD_MEM_ENCRYPT is
enabled.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200903023056.3914690-1-nivedita@alum.mit.edu
|
Linus Torvalds
Olof Johansson
Maxim Levitsky
Stafford Horne
Vitaly Kuznetsov
Wanpeng Li
Wanpeng Li
David Rientjes
Huacai Chen
Lai Jiangshan
Chenyi Qiang
Haiwei Li
Peter Shier
Paolo Bonzini
Florian Fainelli
Fugang Duan
Robin Gong
Thomas Gleixner
Andy Lutomirski
Peter Zijlstra
Vamshi K Sthambamkadi
Alexandru Elisei
Marc Zyngier
Huang Ying
Thomas Bogendoerfer
Huang Pei
Joerg Roedel
Arvind Sankar