aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-10-31ftrace: nmi safe code clean upsSteven Rostedt6-21/+21
Impact: cleanup This patch cleans up the NMI safe code for dynamic ftrace as suggested by Andrew Morton. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30ftrace: nmi update statisticsSteven Rostedt1-2/+24
Impact: add more debug info to /debugfs/tracing/dyn_ftrace_total_info This patch adds dynamic ftrace NMI update statistics to the /debugfs/tracing/dyn_ftrace_total_info stat file. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30ftrace: nmi safe code modificationSteven Rostedt6-1/+141
Impact: fix crashes that can occur in NMI handlers, if their code is modified Modifying code is something that needs special care. On SMP boxes, if code that is being modified is also being executed on another CPU, that CPU will have undefined results. The dynamic ftrace uses kstop_machine to make the system act like a uniprocessor system. But this does not address NMIs, that can still run on other CPUs. One approach to handle this is to make all code that are used by NMIs not be traced. But NMIs can call notifiers that spread throughout the kernel and this will be very hard to maintain, and the chance of missing a function is very high. The approach that this patch takes is to have the NMIs modify the code if the modification is taking place. The way this works is that just writing to code executing on another CPU is not harmful if what is written is the same as what exists. Two buffers are used: an IP buffer and a "code" buffer. The steps that the patcher takes are: 1) Put in the instruction pointer into the IP buffer and the new code into the "code" buffer. 2) Set a flag that says we are modifying code 3) Wait for any running NMIs to finish. 4) Write the code 5) clear the flag. 6) Wait for any running NMIs to finish. If an NMI is executed, it will also write the pending code. Multiple writes are OK, because what is being written is the same. Then the patcher must wait for all running NMIs to finish before going to the next line that must be patched. This is basically the RCU approach to code modification. Thanks to Ingo Molnar for suggesting the idea, and to Arjan van de Ven for his guidence on what is safe and what is not. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds4-9/+16
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: build failure at x86/kernel/pci-dma.c with !CONFIG_PCI
2008-10-30.gitignore updatesAlexey Dobriyan1-0/+2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-28Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds29-118/+62
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) ftrace: fix current_tracer error return tracing: fix a build error on alpha ftrace: use a real variable for ftrace_nop in x86 tracing/ftrace: make boot tracer select the sched_switch tracer tracepoint: check if the probe has been registered asm-generic: define DIE_OOPS in asm-generic trace: fix printk warning for u64 ftrace: warning in kernel/trace/ftrace.c ftrace: fix build failure ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file ftrace: remove ftrace hash ftrace: remove mcount set ftrace: remove daemon ftrace: disable dynamic ftrace for all archs that use daemon ftrace: add ftrace warn on to disable ftrace ftrace: only have ftrace_kill atomic ftrace: use probe_kernel ftrace: comment arch ftrace code ftrace: return error on failed modified text. ftrace: dynamic ftrace process only text section ...
2008-10-28Merge branch 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds10-48/+79
* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: ia64: Makefile fix for forcing to re-generate asm-offsets.h KVM: Future-proof device assignment ABI KVM: ia64: Fix halt emulation logic KVM: Fix guest shared interrupt with in-kernel irqchip KVM: MMU: sync root on paravirt TLB flush
2008-10-28Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds2-2/+16
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: fix irqs on/off ip tracing lockdep: minor fix for debug_show_all_locks() x86: restore the old swiotlb alloc_coherent behavior x86: use GFP_DMA for 24bit coherent_dma_mask swiotlb: remove panic for alloc_coherent failure xen: compilation fix of drivers/xen/events.c on IA64 xen: portability clean up and some minor clean up for xencomm.c xen: don't reload cr3 on suspend kernel/resource: fix reserve_region_with_split() section mismatch printk: remove unused code from kernel/printk.c
2008-10-28Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds3-12/+27
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, memory hotplug: remove wrong -1 in calling init_memory_mapping() x86: keep the /proc/meminfo page count correct x86/uv: memory allocation at initialization xen: fix Xen domU boot with batched mprotect
2008-10-28KVM: ia64: Makefile fix for forcing to re-generate asm-offsets.hXiantao Zhang1-2/+6
To avoid using stale asm-offsets.h. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-28KVM: ia64: Fix halt emulation logicXiantao Zhang4-40/+46
Common halt logic was changed by x86 and did not update ia64. This patch updates halt for ia64. Fixes a regression causing guests to hang with more than 2 vcpus. Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-28KVM: Fix guest shared interrupt with in-kernel irqchipSheng Yang6-6/+26
Every call of kvm_set_irq() should offer an irq_source_id, which is allocated by kvm_request_irq_source_id(). Based on irq_source_id, we identify the irq source and implement logical OR for shared level interrupts. The allocated irq_source_id can be freed by kvm_free_irq_source_id(). Currently, we support at most sizeof(unsigned long) different irq sources. [Amit: - rebase to kvm.git HEAD - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file - move kvm_request_irq_source_id to the update_irq ioctl] [Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-28KVM: MMU: sync root on paravirt TLB flushMarcelo Tosatti1-0/+1
The pvmmu TLB flush handler should request a root sync, similarly to a native read-write CR3. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-28[S390] s390: Fix build for !CONFIG_S390_GUEST + CONFIG_VIRTIO_CONSOLEChristian Borntraeger1-1/+1
The s390 kernel does not compile if virtio console is enabled, but guest support is disabled: LD .tmp_vmlinux1 arch/s390/kernel/built-in.o: In function `setup_arch': /space/linux-2.5/arch/s390/kernel/setup.c:773: undefined reference to `s390_virtio_console_init' The fix is related to commit 99e65c92f2bbf84f43766a8bf701e36817d62822 Author: Christian Borntraeger <borntraeger@de.ibm.com> Date: Fri Jul 25 15:50:04 2008 +0200 KVM: s390: Fix guest kconfig Which changed the build process to build kvm_virtio.c only if CONFIG_S390_GUEST is set. We must ifdef the prototype in the header file accordingly. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] No more 4kb stacks.Heiko Carstens2-13/+6
We got a stack overflow with a small stack configuration on a 32 bit system. It just looks like as 4kb isn't enough and too dangerous. So lets get rid of 4kb stacks on 32 bit. But one thing I completely dislike about the call trace below is that just for debugging or tracing purposes sprintf gets called (cio_start_key): /* process condition code */ sprintf(dbf_txt, "ccode:%d", ccode); CIO_TRACE_EVENT(4, dbf_txt); But maybe its just me who thinks that this could be done better. <4>Kernel stack overflow. <4>Modules linked in: dm_multipath sunrpc bonding qeth_l2 dm_mod qeth ccwgroup vmur <4>CPU: 1 Not tainted 2.6.27-30.x.20081015-s390default #1 <4>Process httpd (pid: 3807, task: 20ae2df8, ksp: 1666fb78) <4>Krnl PSW : 040c0000 8027098a (number+0xe/0x348) <4> R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 <4>Krnl GPRS: 00d43318 0027097c 1666f277 9666f270 <4> 00000000 00000000 0000000a ffffffff <4> 9666f270 1666f228 1666f277 1666f098 <4> 00000002 80270982 80271016 1666f098 <4>Krnl Code: 8027097e: f0340dd0a7f1 srp 3536(4,%r0),2033(%r10),4 <4> 80270984: 0f00 clcl %r0,%r0 <4> 80270986: a7840001 brc 8,80270988 <4> >8027098a: 18ef lr %r14,%r15 <4> 8027098c: a7faff68 ahi %r15,-152 <4> 80270990: 18bf lr %r11,%r15 <4> 80270992: 18a2 lr %r10,%r2 <4> 80270994: 1893 lr %r9,%r3 Modified calltrace with annotated stackframe size of each function: stackframe size | 0 304 vsnprintf+850 [0x271016] 1 72 sprintf+74 [0x271522] 2 56 cio_start_key+262 [0x2d4c16] 3 56 ccw_device_start_key+222 [0x2dfe92] 4 56 ccw_device_start+40 [0x2dff28] 5 48 raw3215_start_io+104 [0x30b0f8] 6 56 raw3215_write+494 [0x30ba0a] 7 40 con3215_write+68 [0x30bafc] 8 40 __call_console_drivers+146 [0x12b0fa] 9 32 _call_console_drivers+102 [0x12b192] 10 64 release_console_sem+268 [0x12b614] 11 168 vprintk+462 [0x12bca6] 12 72 printk+68 [0x12bfd0] 13 256 __print_symbol+50 [0x15a882] 14 56 __show_trace+162 [0x103d06] 15 32 show_trace+224 [0x103e70] 16 48 show_stack+152 [0x103f20] 17 56 dump_stack+126 [0x104612] 18 96 __alloc_pages_internal+592 [0x175004] 19 80 cache_alloc_refill+776 [0x196f3c] 20 40 __kmalloc+258 [0x1972ae] 21 40 __alloc_skb+94 [0x328086] 22 32 pskb_copy+50 [0x328252] 23 32 skb_realloc_headroom+110 [0x328a72] 24 104 qeth_l2_hard_start_xmit+378 [0x7803bfde] 25 56 dev_hard_start_xmit+450 [0x32ef6e] 26 56 __qdisc_run+390 [0x3425d6] 27 48 dev_queue_xmit+410 [0x331e06] 28 40 ip_finish_output+308 [0x354ac8] 29 56 ip_output+218 [0x355b6e] 30 24 ip_local_out+56 [0x354584] 31 120 ip_queue_xmit+300 [0x355cec] 32 96 tcp_transmit_skb+812 [0x367da8] 33 40 tcp_push_one+158 [0x369fda] 34 112 tcp_sendmsg+852 [0x35d5a0] 35 240 sock_sendmsg+164 [0x32035c] 36 56 kernel_sendmsg+86 [0x32064a] 37 88 sock_no_sendpage+98 [0x322b22] 38 104 tcp_sendpage+70 [0x35cc1e] 39 48 sock_sendpage+74 [0x31eb66] 40 64 pipe_to_sendpage+102 [0x1c4b2e] 41 64 __splice_from_pipe+120 [0x1c5340] 42 72 splice_from_pipe+90 [0x1c57e6] 43 56 generic_splice_sendpage+38 [0x1c5832] 44 48 do_splice_from+104 [0x1c4c38] 45 48 direct_splice_actor+52 [0x1c4c88] 46 80 splice_direct_to_actor+180 [0x1c4f80] 47 72 do_splice_direct+70 [0x1c5112] 48 64 do_sendfile+360 [0x19de18] 49 72 sys_sendfile64+126 [0x19df32] 50 336 sysc_do_restart+18 [0x111a1a] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] Change default IPL method to IPL_VM.Heiko Carstens1-1/+1
allyesconfig and allmodconfig built kernels have a tape IPL record. A the vmreader record makes much more sense, since hardly anybody will ever IPL a kernel from tape. So change the default. As I side effect I can test these kernels without fiddling around with the kernel config ;) Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] appldata: unsigned ops->size cannot be negativeRoel Kluin1-1/+1
unsigned ops->size cannot be negative Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] Fix sysdev class file creation.Heiko Carstens1-15/+9
Use sysdev_class_create_file() to create create sysdev class attributes instead of sysfs_create_file(). Using sysfs_create_file() wasn't a very good idea since the show and store functions have a different amount of parameters for sysfs files and sysdev class files. In particular the pointer to the buffer is the last argument and therefore accesses to random memory regions happened. Still worked surprisingly well until we got a kernel panic. Cc: stable@kernel.org Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28[S390] pgtables: Fix race in enable_sie vs. page table opsChristian Borntraeger4-16/+30
The current enable_sie code sets the mm->context.pgstes bit to tell dup_mm that the new mm should have extended page tables. This bit is also used by the s390 specific page table primitives to decide about the page table layout - which means context.pgstes has two meanings. This can cause any kind of bugs. For example - e.g. shrink_zone can call ptep_clear_flush_young while enable_sie is running. ptep_clear_flush_young will test for context.pgstes. Since enable_sie changed that value of the old struct mm without changing the page table layout ptep_clear_flush_young will do the wrong thing. The solution is to split pgstes into two bits - one for the allocation - one for the current state Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-28x86, memory hotplug: remove wrong -1 in calling init_memory_mapping()Shaohua Li1-1/+1
Impact: fix crash with memory hotplug Shuahua Li found: | I just did some experiments on a desktop for memory hotplug and this bug | triggered a crash in my test. | | Yinghai's suggestion also fixed the bug. We don't need to round it, just remove that extra -1 Signed-off-by: Yinghai <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27x86: keep the /proc/meminfo page count correctYinghai Lu1-3/+9
Impact: get correct page count in /proc/meminfo found page count in /proc/meminfo is nor correct on 1G system in VirtualBox 2.0.4 # cat /proc/meminfo MemTotal: 1017508 kB MemFree: 822700 kB Buffers: 1456 kB Cached: 26632 kB SwapCached: 0 kB ... Hugepagesize: 2048 kB DirectMap4k: 4032 kB DirectMap2M: 18446744073709549568 kB with this patch get: ... DirectMap4k: 4032 kB DirectMap2M: 1044480 kB which is consistent to kernel_page_tables ---[ Low Kernel Mapping ]--- 0xffff880000000000-0xffff880000001000 4K RW PCD GLB x pte 0xffff880000001000-0xffff88000009f000 632K RW GLB x pte 0xffff88000009f000-0xffff8800000a0000 4K RW PCD GLB x pte 0xffff8800000a0000-0xffff880000200000 1408K RW GLB x pte 0xffff880000200000-0xffff88003fe00000 1020M RW PSE GLB x pmd 0xffff88003fe00000-0xffff88003fff0000 1984K RW GLB NX pte 0xffff88003fff0000-0xffff880040000000 64K pte 0xffff880040000000-0xffff888000000000 511G pud 0xffff888000000000-0xffffc20000000000 58880G pgd Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27MIPS: lemote/lm2e: Added io_map_base to pci controllerZhang Le3-11/+43
Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: Make firmware parameter passing more robustGeert Uytterhoeven1-4/+18
When booting Linux on a txx9 board with VxWorks boot loader, it crashes in prom_getenv(), as VxWorks doesn't pass firmware parameters in a0-a3 (in my case, the actual leftover values in these registers were 0x80002000, 0x80001fe0, 0x2000, and 0x20). Make the parsing of argc, argv, and envp a bit more robust by checking if argc is a number below CKSEG0, and argv/envp point to CKSEG0. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Remove unnecessary define and cleanup comments, etc.Shinya Kuribayashi1-20/+0
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Extract ll_emma2rh_* functionsShinya Kuribayashi1-45/+38
These functions are completely ineffective. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Remove runtime debug printsShinya Kuribayashi1-17/+0
Remove runtime db_* macros as we don't need them any more. In general, such helpers are useful for initial porting, but once approved, they are not indispensable. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.cShinya Kuribayashi6-367/+249
Current EMMA2RH irq code is mess. Before cleaning it up, gather them in one place as a first step. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_gpio_irq_baseShinya Kuribayashi2-13/+10
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_sw_irq_baseShinya Kuribayashi2-10/+8
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_irq_base global variableShinya Kuribayashi2-11/+8
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_sync on read operationShinya Kuribayashi1-3/+0
It's totally a waste of CPU cycles. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dirShinya Kuribayashi13-16/+16
We'll put all EMMA related headers there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/Shinya Kuribayashi11-3/+3
git mv arch/mips/{emma2rh,emma} and fixups Makefiles. We'll put all NEC EMMA series based machines there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Kconfig reorganizationShinya Kuribayashi8-24/+45
- Move EMMA related stuff into arch/mips/emma/Kconfig - Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively - Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processorsShinya Kuribayashi8-3/+24
We already have sufficient infrastructure to support VR5500 and VR5500A series processors. Here's a Makefile support to make it selectable by ports, and enable it for NEC EMMA2RH Markeins board. This patch also fixes a confused target help, and adds 1Gb PageMask bits supported by VR5500 and its variants. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Disable the right devicePhil Sutter1-1/+1
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add support for NXP PNX833x (STB222/5) into linux kernelDaniel Laird16-0/+2783
The following patch add support for the NXP PNX833x SOC. More specifically it adds support for the STB222/5 variant. It fixes the vectored interrupt issue. Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: CONFIG_TOSHIBA_RBTX4939 spellingGeert Uytterhoeven1-1/+1
Fix a typo in the comment for the TOSHIBA_RBTX4939 config option Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorYoichi Yuasa1-0/+1
In file included from include/linux/ptrace.h:49, from arch/mips/kernel/kgdb.c:25: /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:123: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:124: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:126: error: expected declaration specifiers or '...' before '__u32' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:127: error: expected declaration specifiers or '...' before '__u32' make[1]: *** [arch/mips/kernel/kgdb.o] Error 1 Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: IP22: ip22-int.c header file weeding.Ralf Baechle1-9/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: IP22: Small cleanupsDmitri Vorobiev1-4/+4
The following functions disable_local1_irq() disable_local2_irq() disable_local3_irq() are needlessly defined global, so make them static. While at it, fix a whitespace error in the same file. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RBTX4939: Add smc91x supportAtsushi Nemoto3-0/+84
Add smc91x platform device to RBTX4939 board and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: 7 segment LED supportAtsushi Nemoto5-0/+153
Add sysfs interface for 7 segment LED and implement access routine for RBTX4939. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Alchemy: Wire up SD controller on DB/PB1200 boards.Manuel Lauss2-24/+155
Add au1xmmc platform data for PB1200/DB1200 boards and wire up the 2 SD controllers for them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Set gpio interrupt status and level for CompactFlashFlorian Fainelli1-0/+4
This patch sets the correct interrupt status and level in order to get the CompactFlash adapter working. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Fix build errorAdrian Bunk1-0/+1
mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h> This patch fixes the following compile error caused by commit 606a083b1e1a357cb66454e4581b80f1a67d8368 (MIPS: RB532: Cleanup the headers again): <-- snip --> ... CC arch/mips/pci/fixup-rc32434.o arch/mips/pci/fixup-rc32434.c: In function 'pcibios_map_irq': arch/mips/pci/fixup-rc32434.c:46: error: 'GROUP4_IRQ_BASE' undeclared (first use in this function) arch/mips/pci/fixup-rc32434.c:46: error: (Each undeclared identifier is reported only once arch/mips/pci/fixup-rc32434.c:46: error: for each function it appears in.) make[2]: *** [arch/mips/pci/fixup-rc32434.o] Error 1 <-- snip --> A virtually identical patch was also submitted by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorDavid Daney1-8/+8
<asm/ptrace.h> is exported to userland so can't include <linux/ptrace.h>, so replace the C99 types with their basic C type equivalents. Bug originally reported and initial patch by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Set ENOSYS to errno on illegal system call number for syscall(2)Atsushi Nemoto1-1/+1
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Set positive error number to errno on illegal_syscallAtsushi Nemoto2-2/+2
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: SMP: Don't reenable interrupts in stop_this_cpu; use WAIT instruction.Ralf Baechle1-2/+4
Noticed by Anirban Sinha <ASinha@zeugmasystems.com>; patch by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.